DC installation without disk on the new laptop

Similar Questions

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• Lightroom 5 - re - installation license existing to the new laptop

  Hello

  I recently had an accident with my laptop.  He is now dead.  I want to reinstall Lightroom 5 I bought for download, I have the license number.  I tried downloading via the free trial version, as suggested by the forum, but it forced me to download creative cloud and would not accept my license number, says that it is not that I have already.  My understanding is that you can install the program on two computers, as long as the two belong to the same person. I spent a few hours hacking away and am frustrated, a person can offer only some advice please.  Thanks in advance

  This seems to be a fairly frequent problem, it seems difficult to find non - CC for the download version and the CC version will not work with a license key no CC.

  So, here's what I think you need to do:

  1. Uninstall the CC version you have downloaded and installed.
  2. Go here http://www.adobe.com/downloads/updates.html
  3. Brings you to the download page for each country.  I know it says updates, but if you click on the version of Windows or Mac from LR is actually the entire program
  4. Download and follow the instructions for the installation and then enter your serial number when asked to.

  Autonomous LR does not need by turning off, you can install it on your new laptop with the old number without any problems.  I did it myself in the past that I moved from new PCs.  Should CC and CC before Photoshop disabling but not CC LR.

  Good luck!

• Error message: CD-ROM DRIVER has a PROBLEM when inserting disk on the new laptop.

  Original title: CD-ROM DRIVE

  tried my new laptop by inserting a disc in the CD-ROM drive and the message... CD-ROM DRIVER has a PROBLEM, I clicked on fix of the problem and still nothing.what can do to solve this problem? This is a brand new laptop

  Hi kempie2011,

  1. What is the number of brand and model of the laptop?

  2. you receive error codes?

  I suggest you try the fix it from the link given below and check if it helps.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Also read the following article:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista

  http://support.Microsoft.com/kb/929461

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Restore Windows 8.1 without disks on the new hard drive on laptop Pavilion g6

  Hello world. First Post.

  I got task to restore the laptop to my brother after his hard drive gave the click of death, only 6 months out of warranty. I replaced the hard drive.  Fortunately all of its documents and photos have been copied on an external drive, but there is unfortunately no image of the system or the restore disc or disc to install Windows 8.

  Y at - it anywhere on the net where I can get an ISO image to burn a disc of installation of Windows 8 or can HP provide a preference restore disc to restore the laptop back to factory settings.

  Any ideas greatly appreciated.

  Hello

  There are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software.  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2. download the file to Image of Windows 8 on the following link - Note that this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  If you need a utility to create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  The product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Software extra and you may need drivers are by entering your full model number or Nr here.

  Kind regards

  DP - K

• Installation of printer on the new laptop

  Buy HP Pavilion dv7. Unable to connect laptop printer all-in-one HP Officejet; have the drive... but the drive does not list Windows 7. What is my problem?

  gerriegayle45 wrote:
  

  Buy HP Pavilion dv7. Unable to connect laptop printer all-in-one HP Officejet; have the drive... but the drive does not list Windows 7. What is my problem?

  That because your CD is obsolete. You can get your driver here:

  Windows 7 32 bit - software & Driver Downloads - Officejet HP 5610xi all-in-one printer

  Windows 7 64 bit - software & Driver Downloads - Officejet HP 5610xi all-in-one printer

  I hope this helps!

  SeanS

• CS4/5 installation on the new laptop without disc?

  I'm picking up a new laptop PC, this afternoon and I plan on disable and remove my old laptop for CS5. I have CS4 originial records, registered, and the disks to upgrade to CS5 (the two Design Premium, if this allows everything), but the new laptop doesn't have a hard drive. What is the best way to install CS on the new laptop computer?

  In addition, I should start by installing CS4 and follow the update? I don't remember exactly what, but I remember running on some issues when I did it first about 3 years ago (and have had error messages resulting from so I want to avoid on the new computer).

  Thanks in advance.

  No, you just install cs5.  you will be prompted for the serial numbers of your cs4 and cs5 upgrade.

  If you follow the 7 steps, you can dl a trial through one of the links on this page: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  as a general rule, do not carefully follow the steps 1, 2 or 3 is the problem.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

  I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon. Mick Murphy - Microsoft partner

• Installation of the elements on the new laptop 10

  Already had 10 items on old laptop which is dead - still have the serial number, but how do I install it on the new laptop to Windows 8?

  Hi Michael,

  You can download 10 items of direct download links available at: http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l

  But make sure you follow the steps mentioned on the page before you start the download.

• Installation of OS on the new computer

  Kindly tell me the procedure of Instattation of my Windows Vista that has been installed on a laptop that is now outdated. I bought a new laptop and you want to install the same operating system on the new laptop. the older laptop doesn't have to use the OS aa it is planned to be scratched.
  Please suggest something of the same procedure.

  If Vista is preinstalled on your old laptop, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You may NOT transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If your license Vista is paid for the Retail Vista license, read on:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• CS4 programs transferred to the new laptop

  The laptop on that initially charged Suite CS4 dead. Bought a new laptop at Micro Center. They transferred programs and data in the new laptop. I tried to use Photoshop and DreamWeaver, but get the error code 147,20.

  Micro Center told to contact Adobe.

  I bought CS4 Suite while studying at JCCC 5 years. What do need me to get the program to work on my laptop replacement?

  You must install the software, transfer does not work well.  You will need the serial number of your purchase to activate the software after installation.  You need floppies installation of your purchase, in order to install, and if you don't have the disks, then you can download the trial through the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  You may have disabled original activation, especially the case if you had it installed on more than one machine.  To do that you must contact Adobe technical support directly through chat or by phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• How can I configure outlook express electronic mail on the new laptop, even as this computer

  I tried to implement the same e-mail I have on this computer, on the new laptop without success

  See here: http://www.insideoe.com/backup/clone.htm and www.oehelp.com/backup.aspx

  You have to reenter your password, but if not, it should be the same.

  Steve

• Re-installing Lightroom on the new laptop, keywords from images! (I think!)

  Hello

  I use Lightroom 5.2

  I spent several days it is has updated all of my keywords in LR using my old laptop. I have about 8 000 image files, mainly RAW CR2 files, all recorded on a disc toshiba external hard.

  Now I have a new laptop and reinstalled LR on this new laptop computer. I'm starting to import all image files in LR since the external hard drive, but I noticed that there are no keywords in the version of LR installed on the new laptop.

  I perhaps foolishly assumed that when I keyworded all files first time round the metadata would be saved in the CR2 file itself, such that it would be accessible by other applications, or, in this case, by a version of LR installed on a different laptop. This doesn't seem to be the case.

  I'm doing something wrong? Are there key words, but I can't see them somehow?

  I really don't go back through 8000 files and re - keyword all, it took me days!

  If all this fails, can I go back to the version of LR on my old laptop (which I still have) and somehow join keywords in files on a more permanent basis so that they are recognized by my new laptop, or are what I'd need to set it as default when first, I realized the keywording exercise?

  Thank you very much
  Tom

  But it's a brand new version/installation of LR. Then it will be a brand-new photo as much as the new version of LR is concerned, used? How they see the before image file?

  Your keywords are in Lightroom, more precisely, they are in the catalog file. You must transfer the catalog file, as described in the link I provided. Import photos is not the way to do it.

  I tried to work through the tutorial you linked to, but I'm stuck at step 4: transfer. For example, he says to transfer the catalog, etc.. But I'm not transfer anything I am? I just have to say the new version of LR where to look to find image files...

  You MUST copy the file from the catalog to the new computer. Then, although it is a new installation of Lightroom, you MUST use your existing keywords with catalog. That's the key, you MUST use the existing catalog file.

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact