Dead Ringer for MS Paint with several levels of undo?

Similar Questions

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• SQL Query to retrieve data in XML format with several levels

  Hello
  
  I'm looking to help generate XML from Oracle database. The request must contain many levels of sub...
  
  For example.
  Create table inventory
  (Group varchar2 (10))
  category varchar2 (10),
  ProductName varchar2 (10),
  Detail varchar2 (10));
  
  The output should be also present below. The data must be multiple values for each item.
  
  < inventory >
  < name of group 'auto' = >
  < category name 'cars' = >
  < name productname = 'Seat' >
  < details > red color < / details >
  < details > 5 seats < / details >
  < / productname >
  < / category >
  < / Group >
  < / inventory >
  
  Please share your ideas by retrieving data in the XML structure using SQL or PL/SQL for oracle 10 g.
  
  Thank you and best regards,
  Siva.

  This?

  SQL> create table t as
  with t as (
   select 'automobiles' "GROUP", 'cars' category, 'seat' productname, 'color red' details from dual union all
   select 'automobiles', 'cars', 'seat', '5 seats' from dual union all
   select 'automobiles', 'cars', 'make', 'ford' from dual union all
   select 'automobiles', 'cars', 'make', 'Toyota' from dual union all
   select 'automobiles', 'Bus', 'Model', 'volvo' from dual union all
   select 'automobiles', 'flight', 'Airbus', '400 passenger' from dual union all
   select 'automobiles', 'flight', 'Airbus', '500 mph' from dual union all
   select 'HealthCare', 'Nutrition', 'centrum', 'Organic' from dual union all
   select 'HealthCare', 'Nutrition', 'centrum', 'Chemical' from dual union all
   select 'Computers', 'Software', 'Database', 'Oracle' from dual union all
   select 'Computers', 'Software', 'Database', 'sqlserver' from dual
  )
  select * from t
  /
  Createtable successfully completed.
  
  SQL> select xmlserialize (content x.column_value indent) xml
    from xmltable('element Inventory
                   {for $g in distinct-values(ora:view("t")/ROW/GROUP)
                     return element group
                        {attribute name {$g},
                          for $c in distinct-values(ora:view("t")/ROW[GROUP=$g]/CATEGORY)
                            return element category {attribute name {$c},
                              for $p in distinct-values(ora:view("t")/ROW[GROUP=$g and CATEGORY=$c]/PRODUCTNAME)
                                return element productname {attribute name {$p},
                                  for $d in distinct-values(ora:view("t")/ROW[GROUP=$g and CATEGORY=$c and PRODUCTNAME=$p]/DETAILS)
                                    return element details {$d}
                                                           }
                                                    }
                        }
                   }') x
  /
  XML
  --------------------------------------------------------------------------------
  
    
      
        
          
  Oracle
          
  sqlserver
        
      
    
    
      
        
          
  Chemical
          
  Organic
        
      
    
    
      
        
          
  volvo
        
      
      
        
          
  Toyota
          
  ford
        
        
          
  5 seats
          
  color red
        
      
      
        
          
  400 passenger
          
  500 mph
        
      
    
                                                                      
  
  1 row selected.
  

• Form of the ADF for data structure with several child records

  Jdev version: 11.1.1.2.0
  
  I have a data structure with a one-to-many parent-child relationship. I give an example of the data structure.
  
  Employee table:
  ----------------------
  EmpId
  EmpName
  Salary
  
  Table Historiqueemploye:
  -------------------------------
  EmpId
  Previous_Employer
  From_Date
  To_Date
  
  
  In the ADF form for entering data for a new employee, I want to give a layout (say, a button "Add row") for the history of the employee's employment. How can we succeed in ADF?
  
  I'm new to ADF. Would be grateful if someone can help me with detailed steps or a link showing such a demonstration.
  
  Thanks in advance.

  Hello

  If you exposed a View for the Historiqueemploye table object, then simply drag this point of view as a form and then drag and drop the create operation (within the structure of the View object in the data control palette) as a button for the new line is created. If you do not always display the historical, add it to an af:popup and start button context menu create or hide the af: panelFormLayt that a form is added by default.

  Frank

• Problem of synchronization for Smartphones blackBerry with several mailboxes

  We have a user who has Microsoft Outlook configured to display several mailboxes.  It seems that if there something from his Inbox to another folder within its own box mailbox, then this movement is well synchronized down to BB, but if he moves to within its own mailbox to another mailbox, then the move is not noticed , and the item is in the Inbox on his BB indefinitely.

  Two questions:

  (1) any idea how to solve this problem?

  (2) is it possible to force a full resynchronization of the box the mailbox to get it to the stage?

  Hi and welcome to the Forums!

  You did not say, but I assume you're on BES rather BIS/OWA. Therefore, you should study activation hard deletes:

  • KB04853 How to turn tough cuts on the BlackBerry Enterprise Server

  Good luck!

• Maximum number of user defined dimensions for Hyperion application with several types of plan

  Dear,

  I know that the maximum number of dimensions is 20 for an application and for better performance, we shouldn't have more than 12 years, but if we plan different types? I found the below in the psb user guide:

  "Applications are supported up to 20 dimensions. However, optimal performance, not more than 12 dimensions must be attributed to each Type of Plan. »

  I have therefore 20 dimensions by plan type, or application? and that optimal performance it should be 12 dimensions by plan type, not by the application?

  Any advice, please?

  Thank you

  Hello

  The limit is for a planning application for a type of plan... You can add dimension to choose to exist for a type of plan in particular.

  All members of custom dimension that there will be for only this type of regime...

  Kind regards

  Sourabh

• The list of all URLS of OEM for a server with several database

  Hi all
  I have a 12 database on a server and would like to know the OEM access control database URL.
  The URL is stored in the database or log file in ORACLE_HOME.
  
  Thank you.

  user5846399 wrote:
  Hi all
  I have a 12 database on a server and would like to know the OEM access control database URL.
  The URL is stored in the database or log file in ORACLE_HOME.

  Thank you.

  You can get it in two ways:

  1 export ORACLE_SID = sid_name

  emctl status dbconsole

  2. check the file $ORACLE_HOME/hostname_sid/sysman/conf/emd.properties

  Concerning
  Rajesh

• ATTRPARENT dimension of the text attribute to several levels of construction with a rules file

  Hello

  My first post here.

  I'm trying to create the dimension generation rule to create a dimension of the multilevel text attribute and then combine with the basic dimension.

  So far, it is difficult.

  With regard to my experience:

  -J' have a relatively basic understanding of the rules of charge both with regard to the data loads and define the updates - I find this quite confusing area and the documentation does not help that much

  -J' only started using dimensions attribute, so for me it's a new concept, but we are already quite useful in certain applications

  -J' I try to automate the process of construction of dimension attribute, and then associating attributes with the basic dimension

  I use the following documentation as a guide:

  Building size attribute and associate attributes

  http://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dotdimb.htm

  and / or

  Work with the attribute multi-level Dimensions

  http://docs.Oracle.com/CD/E26232_01/doc.11122/esb_dbag/frameset.htm?ch21s06s05.html

  (essentially the same source in both cases)

  The ultimate goal is to replicate one of our existing recently created attribute dimensions of a cube to another.

  I built a few versions of the required flat file and the corresponding rules file, but none worked.

  I tend to get the following validation error message:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  As I got stuck so I gave to the current actual attributes and moved on to experimenting with the sample / base cube.

  I built a flat file that is supposed to create a new dimension of text attribute named ABC with two attributes level structure:

  ABC

  A

  AA

  AB

  B

  BA

  BB

  and associate it with the dimension of the product in the following way

  200-10 AA

  200-20 AB

  200-30 BA

  200-40 BB

  The flat file looks like this:

  "AA"      "A"         "200-10"               "A"         "AA"      "200"

  "AB"      "A"         "200-20"               "A"         "AB"      "200"

  "AB"      "B"         "200-30"               "B"         "AB"      "200"

  "BB"       "B"         "200-40"               "B"         "BB"       "200"

  and the rule file has 6 matching columns with titles as follows:

  Level0, LEVEL1 ABC, ABC Level0, product ATTRPARENT0, ABC ABC0, LEVEL1 product, product

  all agree with what the documentation says.

  The first 2 columns are intended to define and create the dimension of the attribute, while the 4 next make association...

  I couldn't the above rules file to validate.

  The same validation error message appeared as previously:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  However when I tried to actually update the outline of the mistakes of dimbuild.err file has been created which gives some additional clues:

  \\ATTRPARENT column 4 must precede a numeric or datetime column attribute association

  Now... Finally the interesting part...

  Back to the documentation...
  

  I don't mind if the size of the attribute is generated and then those associated with step or in two separate steps.

  I try to do both tasks in one step only because that's what the documentation seems to suggest attributes at several levels.

  First of all I read:

  Note:

  If you work with a multilevel dimension attribute or with a dimension of the attribute of the digital type, Boolean, or date, the rules file requires an additional field. See working with Dimensions of the multilevel attribute.

  Yes, I work with a dimension of the multilevel attribute so the above statement applies (I guess) and so I'm going to see what works with several levels attribute Dimensions has to say.

  Then, I read:

  When an attribute is part of a digital multi-level, Boolean, or dimension attribute date, the source data must include columns for all generations or the size of the attribute levels.

  Fair enough... so I do what they say... my attribute dimension is at several levels, so I can assume that the statement above applies...

  So, I build my rule in accordance with the guidelines above.

  And then, as we have already mentioned, I get the error message about ATTRPARENT and when I read, it turns out that ATTRBPAREN cannot be used for numeric or date attribute dimensions !

  I'm totally confused at this point.

  What about the attribute text multi-level dimensions ?

  They are several levels but they are NOT numeric or date those!

  The documentation does not seem to tell what to do in this case...

  Anyone build something like that?

  What is the thing that I'm missing?

  What about

  I'm glad that you got to work. I tested and that is to create the dimension attribute and associate it with the rule of the load.

  You could ignore the construction size manually. Remove the attribute dimension. The rule1 go for the Dimension settings under the definition of Dimension tab. Then right-click on the product and change the properties. On the attribute tab, add 'Test' or whatever you want to call the attribute, and assign the text type. He adds the attribute and associate it with the basic dimension when it create the hierarchy. Note that the rules could actually be reversed where you create members of level 0 and then more later to create the hierarchy.  Of course you must pass the size of the attribute association to the other rule

• [as2] Several levels of loading in a main level

  Hi .

  I´d would like to know.

  How could I make a preloader with several levels in as2?

  Can I use loadMovieNum or class MovieClipLoader?

  I want to make a main progress bar, which is loading

  at all levels, not a progress bar for each level.

  How can I do that?

  Thank you

  I changed levelNum and used swfA.length but impossible to change anywhere in the code:

  var swfA:Array = ["" swf1.swf ",...," swfN, swf ""];

  var mcl:MovieClipLoader = new MovieClipLoader();

  var OL: Object = {};

  var currentLevel:Number = 1;

  loadF();

  {lo.onLoadProgress = function(target:MovieClip,bl:Number,bt:Number):Void}

  TF. Text = 100 * (+ bl /(bt*swfA.length) swfA.length (currentLevel-1)) + '% Loaded ";

  }

  {lo.onLoadInit = function(target:MovieClip):Void}

  currentLevel ++;

  If (currentLevel<>

  loadF();

  } else {}

  launch application

  }

  }

  function loadF (): Void {}

  mcl.loadClip(swfA[currentLevel-1],currentLevel);

  }

• Can I create a Google Map with several points?

  I am building a Web site for a company with several companies, and they want all appear on the map. In the standard Google maps widget, you can add only one address. Is it possible to add multiple addresses without scripting?

  You can always add placements more once you have published the site by editing the source code. Otherwise simply don't use the widget and enter the code clean Google according to custom HTML.

  Mylenium

• Book of 10 with several files frame crashing when I change the numbering at the level of the book.

  I built a picture book (image 10) with several files from a variety of books. The files have inlays of text and references to breast and between chapters. When I go to set the numbering at the level of the book - as soon as I click on the Numbering dialog box Set - Framework breaks down and I get an internal error 10024, 6382424, 6369627, 6383085. I have attached a screenshot.

  I take the files on the book and added back in. These files worked fine in the original books, that I copied them from. I can't get the book to number correctly. Help, please.

  Hi, Estelle,.

  Don't know if this is relevant to what you are feeling, but...

  I've encountered similar problems of numbering with several of my books.

  What fixed it finally for me, is that I discovered that some files were overrides of paragraph style (not necessarily related to positions or section heads.

  Once I removed all replacements of these files, numbering issues have been resolved.

  While I use the plugin Tools section , you can scan your files for the substitutions with built-in FM find/replace.

  Kind regards

  Amitai Sela

  Philips Healthcare

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• work with several images in windows paint.

  How to import pictures 2 of 'my images' in the media player in windows xp so that I can 'swap' faces on them using the feature of Windows paint?

  And how can I do this?

  Thanks for any help with this!

  How to import pictures 2 of 'my images' in the media player in windows xp so that I can 'swap' faces on them using the feature of Windows paint?

  And how can I do this?

  Thanks for any help with this!

  =======================
  Open 2 instances of MS Paint.

  With some work, this can be accomplished in
  MS Paint. Have a look at the following tutorials.

  Microsoft Paint: tools
  The selection tools
  http://www.lkwdpl.org/classes/mspaint/tools/selection.html

  MS Paint: tools
  The selection tool
  Example: Working with selections to combine two images.
  http://www.lkwdpl.org/classes/mspaint/tools/selectionex.html

• syslogging to 2 host with different levels of severity?

  I have a PIX that sends the logs to a host with Cisco syslog installed. It is configured to send messages of level 3 (as required by the internal standards) of gravity.

  I have another host which collects the theses papers too, but I want some info - level 5 or 6.

  ? is it possible to config the PIX to send logs on 2 different hosts with different levels of severity?

  you configure the pix to send to 7 on a syslog server. configure you this server to send events to the level 3 to another server. I think that it should be possible

• I'm looking for a simple list of available applications with different levels of creative cloud subscriptions?

  Boy, the Adobe web site is incredibly frustrating. It is very difficult to accomplish some very simple tasks. First of all, there should be an email address for contact. I shouldn't be forced to submit my question on a forum. It's cheap and lazy on the part of Adobe, especially when they charge a lot for their subscription applications.

  My biggest complaint is that I can't find a simple list of the applications available with the cloud creative in different subscription levels. When I search, it sends me to a video of slick 'overview' of the creative cloud which tells me zero in on specific applications available. It should be a simple list of available with creative cloud applications and a side-by-side comparison of the applications available with the different levels of subscription creative cloud. Why can't I find something like this on the web site of Adobe? I found a page that lists 15 adobe applications, but not a page that describes to me what apps come with what levels of creative cloud subscriptions.

  There are only 3 shots of cloud. Inclusions are the same for both commercial or student.

  All applications

  Desktop: desktop applications Adobe Creative Cloud | Adobe Creative Cloud

  Mobile applications: Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

  Same info differently formatted: Adobe CC 2015 Direct Download Links: Creative Cloud 2015 Release | ProDesignTools

  Plan of photography: Photoshop + Lightroom

  Single App plans (applications available for the unique implementation plans are in the drop-down menu on the page of the plans of cloud)

  Pricing plans and creative Cloud membership | Adobe Creative Cloud