Deadly blue screen (professional assistance)

Similar Questions

• Blue screen with message 0X0000008e...:)

  Almost all the time my Virus Scanner (G Data Internetsecurity of 2010) DOE a regular analysis the computer falls down after about 20%. The deadly blue screen comes with the technical info:

  0x0000008E (0xc0000005, 0x8c0e2d25, 0xe4467a8c, 0x00000000

  Syscorr 32vsys

  Address: 8c0e2d25 basic to

  8c0d7000, Datesetup

  48728c1b

  (some letters have been Capitalletters, but I don't know which ones.) Sorry)

  Toulouse you!

  (G Data says it's not their fault...)

  Hello

  Carefully check for malware before you change your antivirus and use the withdrawal of the constructor
  tools and instructions to be sure leftovers are not left which can cause strange problems.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ------------------------------------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows XP Professional blue screen/loop

  I have a computer that I had difficulty. It has Windows XP Professional. As it starts, it passes POST, however it stops during the BIOS. And the start-up process in a loop. Before the loop is executed at the beginning, I'm able to see a flash of blue screen. I am not able to pause the screen fast enough to watch error numbers. However, with knowing that it is Windows XP Professional, I was able to boot from a CD to get to a command line to fix. I was located on drive C. I typed then helps the command to ensure that the orders that I knew would work. Seeing as both, I am aware of were there, I then typed fixboot. Once completed, I restarted without the CD. He is always in a loop. I followed the steps with the CD once more, but rather used the fixmbr command and rebooted without the CD. Shut up always. I, with my knowledge of computer science as a student of computer science and technology, came personally to the conclusion that it may be a corrupted registry. Would be using the manual system restore may solve the problem? If so, use the manual located on this url to use for this OS? http://www.technibble.com/how-to-disable-automatic-restart-for-bsod-if-you-are-unable-to-get-into-windows/. Thank you.

  I was able to fix the laptop. Thanks for your good help. It ends up being a hard drive error that I was able to fix by using MS-DOS. I was able to refine due to the use of the chkdsk command. Thanks again for your help.

• I get the blue screen error after installation of Visual Studio 2010 Professional Test Edition. Help?

  A brief overview of ALALA situation and how it happened:

  1. I went to microsoft.com and download Microsoft Visual Studio 2010 Professional Trial Edition

  2. I opted to use the Installer web pro (4.3 MB) and it correctly installed, restarted and completed the installation.

  3. I opened one of my previous Visual Studio 2008 Solutions and it prompted me to convert the solution.

  4. it is the solution converted successfully and open well.

  But now for some reason any my computer started to give me a blue screen. It forces the computer to restart, and then it connects back with errors:

  "The system has recovered from a serious error, a log of this error has been created"

  "Error signature".

  BCCode: 1000007f BCP1: 00000008 BCP2: BA348D70 BCP3: 00000000

  "BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1.

  "The following files should be included in this error report:
  C:\DOCUME~1\DSmith1\LOCALS~1\Temp\\WER81ad.dir00\Mini10311-04.dmp

  C:\DCUME~1\DSmith1\LOCALS~1\Temp\\WER81.ad.dir00\sysdata. XML ".

  It's about every 30 minutes now. It only started after installing Visual Studio. Any help?

  Hello

  You can check this link:

  General causes of errors "STOP 0x0000007F"

  http://support.Microsoft.com/kb/137539

• Update Windows Installer is dead & now: 0x0000007B blue screen (0x80399BB0 0 x 0000034 0x00000000 0x00000000) AND a fix will prevent the system from starting.

  I was installing updates of windows and the computer is dead in the middle of it.  When I turned it back on it brought me to a blue screen with error codes: 0x0000007B (0x80399BB0 0 x 0000034 0x00000000 0x00000000).  It prompted me to do a system restore or to get to the system recovery, however it shows that there is no available restore points (even though I know that there are a bunch of them... because I checked this before I tried to make the updates of windows).  I went into the system recovery & the scan of my system with a scan of the additional memory, and there is nothing wrong with my real hardware.  The error recovery of the system that was given to me after the scan of my system is "a fix prevents the system to start.".  I looked at different positions in line with methods to get around this, but none of them does not seem to work.  Vssadmin does not appear on my system to try to use it again.

  I also tried cela http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/8b3e2550-c174-486f-b5dc-98260abc05f9, but as I mentioned before all my restore points have disappeared and when I try not to make method 4 there is no pending.xml file and these registry entries do not exist: HLKM\Offline Components\AdvancedInstallersNeedResolving, HKLM\Offline Components\PendingXmlIdentifier.

  I'm almost done try all this and ready to make a fresh Windows... Install but I hate to really do this knowing that everything was working fine before all this & my hardware is fine... If I could just figure out how to get rid of this darn update all this hangs then all would be well.  Anyone have any suggestions?

  Thanks in advance,

  Phatty

  Hello

  When a computer dies in the middle of an update, it often corrupts many system files leaving no other choice than to reinstall. This is why it is always recommended that laptops/notebooks be connected when you install updates. If Windows was trying to replace a critical system file when the power is off, there are very little that you can do to fix it. If possible, start with a system for the Recovery Console disk and try running "sfc/scannow" to correct or replacement of the damaged system files, but does not satisfy, you are faced with a relocation.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Blue screen common problems with Windows 7 Professional

  Hello

  My laptop that runs Windows 7 Professional has been crashing with a blue screen and restarts itself several times in the recent past. I have some information on two recent falls that occurred during the 6 days (yesterday and today). I think I was the first remote desktopping (last Wednesday) and has been streaming video on the internet with an Antivirus scan running in the background the second time (today). I guess that the accidents were caused due to high loads as I was running some heavy programs both times. I enclose a copy the details of the problem for the two events below.

  Last occurrence (today):

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: f4
  BCP1: 0000000000000003
  BCP2: FFFFFA8007C166F0
  BCP3: FFFFFA8007C169D0
  BCP4: FFFFF80002FCB7C0
  OS version: 6_1_7601
  Service Pack: 1_0

  Product: 256_1

  Previous (last Wednesday) occurrence:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 7A

  BCP1: FFFFF6FC50020F30

  BCP2: FFFFFFFFC00000C0

  BCP3: 0000000045F0A880

  BCP4: FFFFF8A0041E6000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  I had a few temporary files and minidump both the times mentioned in the details of the problem. Please let me know what is the cause frequently these problems and how to solve them.

  I would also like to know if these blue screen crashes affect the functionality of my laptop or files/data stored in it. Thanks in advance for your help.

  Thanks and greetings

  MOULEE Pascaud

  I would update your drivers of Juniper, theyre 6-7 years. I don't think that they are windows files

  NETwNs64.sys your Intel wireless drivers are in 6 years. I'd like to update

  Intel® Management Engine Interface is also 6 years

  Your Intel video drivers are also old - 3 years

• Portege R830 had dead blue when the screen connects to wifi or shared internet

  It seemed began as soon as the automatic update from Microsoft on Qualcomm, Atheros, every time when connect to any WIFi, share internet, my portege R830 shows blue screen and the following error message:
  unhandled system_thread_exception (athwb.sys)

  I found that I am not the isolated on the Web site. I tried to remove and stop updates. However, once I connect to the internet, the blue screen comes back.

  Is the problem because of the network adapter? The model is Qualcomm Atheros AR9002WB
  Can solve the problem if I download the new driver of Qualcomm-Atheros site? Or if I replace a new adapter?

  The athwb.sys file belongs to the Atheros wireless driver. Usually placed in C:\Windows\System32\drivers\athwb.sys
  It seems that in your case this file causing the BSOD.

  I found a very interesting detail about this problem and why it seems.

  A user wrote:
  {quote} The issue is due to a database hosted on Linux kernel mapped NAS drives and if the Client for NFS is installed on the windows machine. For some reason, this configuration does not work. If you mount your shares and NFS is installed it tries to use the NFS client and fails miserably. Trick is to disassemble all the shares of logging in Safe Mode and then rebooted and uninstall the NFS client and then mount your shares. {quote}

• Blue screen - Windows 7 Professional 64 bit

  Important security updates issued December 8, 2009 caused my computer to go to a blue screen of death at startup loop.  Once I started an image created December 6, I had no problem unless I have reinstall the update Dec. 8.  Does anyone else have this problem?  I have a motherboard Intel DX38BT standard very with the latest BIOS and processor Quad Core Extreme.  All other software are up to date.

  Hello

  You can try to apply the update manually.

  MS09-072: Cumulative security for Internet Explorer update
  http://support.Microsoft.com/kb/976325

  Make a Restore Point, and if it causes problems you can control panel - Windows updates - bottom left
  Then uninstall it updates installed, or if necessary, use the Restore Point.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  How to uninstall a Windows Update in Windows 7
  http://www.SevenForums.com/tutorials/24373-Windows-update-uninstall-update.html

  How to hide or restore the updates of Windows hidden in Windows 7
  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  If the update will not be installed then something like antivirus/antispyware/security products or
  Maybe an add-on stops, it. You can troubleshoot those or right-click on it and HIDE
  it. There may be a further revision to come if it causes errors for many.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen Stop error dead: 0x0000008E...

  I get the blue screen of death at random, with the error: stop: 0x0000008E, followed by a group of numbers, followed by: base win32.sys - address BF9552CA base at BF800000, Datestamp 4DE797D3... How can I fix it, and what is it?

  Thank you
  Hi Kingfisher13,
   
  -Did you of recent changes made to your computer before this problem?
   
  Follow the steps listed in this article to resolve the problem:
  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Blue error screen - I have a Lenovo Thinkpad which runs on Windows XP Professional. The error message I get on the blue screen includes:

  IRQL - NOT LOWER OR EQUAL and Stop: 0x0000000A (0 x 0, 00000002 00000001, 0xF7C88044, 0 x 80527470)

  After the blue screen, a message will appear asking if I want to start Windows normally, the last configeration who worked, safe mode, etc.  Whatever the mode, I have chosen, the system returns to the blue screen and the process starts all over again unless I turn off the computer.

  I reset my computer to its factory settings, but the blue screen issue continues.  Is there a way to fix this?

  Hi ARZ1,
   
  Follow the steps listed in the article below and check if it helps you:
  You receive an error message "Stop 0x0000000A" in Windows XP

• Can anyone assist me with this STOP error blue screen? IRQL_NOT_LESS_OR_EQUAL

  Hello

  Yesterday, my measure PC worked fine. To market today, about twenty seconds after startup, I got a blue screen (seen below) and get that since then. However, I am able to run very well Safe Mode. I read on the installation of a patch and installed, but may not run in Mode without failure, and I don't have enough time to run it in normal mode until I get the blue screen again, which is very frustrating. If someone could get back to me soon on how to address this problem, it would be much appreciated.

  Thank you!

  -Ben

  Hi Ben,

  Thank you for the update.

  You can refer to the suggestions provided by Marilyn O replied on October 1, 2012 which can help you create a repair disk.

  I hope this helps.

• Blue screen Memory Dump error - Windows 7 Professional 64 bit

  Hello

  I got the blue screen three times a week, the brand of my computer is Alienware M14X

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA8001CEDE00
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031615-91322-01.dmp
  C:\Users\Akkineni\AppData\Local\Temp\WER-170087-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Please help me.

  Kind regards

  Aty.

  Hello

  If you are overclocking anything STOP! This is much like problems caused by
  Overclocking and heat related.

  BugCheck C4, {f6, 354, fffffa8010c16630, fffff880075a4f50}

  WARNING: Unable to verify timestamp for dne64x.sys
  ERROR: Module load completed but symbols can be loaded for dne64x.sys
  Probably caused by: dne64x.sys (dne64x + ff50)

  dne64x.sys as of 2008-11-10 deterministic Network Enhancer

  fffff880 '07595000 fffff880' dne64x of 1000 c 075 T (no symbol)
  Loaded symbol image file: dne64x.sys
  Image path: \SystemRoot\system32\DRIVERS\dne64x.sys
  Image name: dne64x.sys
  Timestamp: Mon Nov 10 17:01:24 (4918 964) 2008

  Bugcheck 1000007E, {ffffffffc0000005, fffff88006caf3ef, fffff880009e81c8, fffff880009e7a20}

  Probably caused by: nvlddmkm.sys (nvlddmkm + 29c3ef)

  nvlddmkm.sys on 01/09/2015 Nvidia video drivers.

  fffff880'06 has 13000 fffff880'07421000 nvlddmkm T (no symbol)
  Loaded symbol image file: nvlddmkm.sys
  Image path: \SystemRoot\system32\DRIVERS\nvlddmkm.sys
  Image name: nvlddmkm.sys
  Timestamp: Fri Jan 09 14:22:06 2015 (54B0548E)

  Bugcheck 50, {fffff8a012fd3fe8, 1, fffff88005f57609, 0}

  WARNING: Unable to verify timestamp for igdkmd64.sys
  ERROR: Module load completed but symbols can be loaded for igdkmd64.sys

  Could not read the name of the problem driver
  Probably caused by: igdkmd64.sys (igdkmd64 + 32e609)

  Igdkmd64.sys dated 12/12/2012 drivers Intel Graphics Accelerator

  "fffff880 ' 05 c 29000 fffff880 ' 061441a 0 igdkmd64 T (no symbol)
  Loaded symbol image file: igdkmd64.sys
  Image path: \SystemRoot\system32\DRIVERS\igdkmd64.sys
  Image name: igdkmd64.sys
  Timestamp: Wed Dec 12 16:42:26 (50 92472) 2012

  BiosVersion = A09
  BiosReleaseDate = 29/06/2012
  SystemManufacturer = Alienware
  SystemProductName = M14xR2
  Family = 103C_5335KV
  SystemVersion = A09
  SystemSKU = xxx123x #ABA
  BaseBoardManufacturer = Alienware
  BaseBoardProduct = M14xR2
  BaseBoardVersion = A09

  1. update all 3 of these pilots to Alienware and to sites the makers' real device.
  Check with the support of Nvidia and other OEMs for known problems. If no
  more recent, it may be necessary to go back to the old stable versions.

  2. Remove ALL power, and then reinstall the memory.

  3 try adding a fan blowing under the laptop to see what helps.

  4. If none of those is possibly a re-installation of Windows can help.

  5. check with Alienware support or a real computer store (that makes its own service in the workshop).

  Alienware - Support - drivers and downloads
  http://support.Dell.com/support/topics/global.aspx/support/alienware_support/alienware_support?s=DHS

  Alienware - Community Forum - Club
  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Rob - SpiritX

• Error screen dead blue "" BCCode: 9f ""

  Original title: Blue Screen of Death

  I just bought a second hand Acer Core i3 o Windows 7 running and I've known 3 blue screens with the following errors:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 12297

  More information about the problem:
  BCCode: 9f
  BCP1: 0000000000000003
  BCP2: FFFFFA8008C2E080
  BCP3: FFFFF80000B9C4D8
  BCP4: FFFFFA8004203370
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Takes what is the cause?

  Send a copy of your dump file in a shared file on your disc of sky with a link here.

  The dump file will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  Please download and run the display driver and download a copy of the report he produced on your sky player. To obtain a report all drivers Select Edition, select all followed by file, save selected items.
  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download your disk from sky to share with everyone and post a link here. Please say if the report was obtained in safe mode. The request for a copy of this file is additional to answer the question about the brand and the model.

  Help with Sky Drive see section 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Blue screen error 0x0000001E on Windows 7 Professional

  Firma problema:
  Problem event name: BlueScreen
  SO version: 6.1.7601.2.1.0.768.3
  Locali impostazioni ID: 1040

  Further information sul problema:
  BCCode: e1
  BCP1: FFFFF80003375610
  BCP2: 0000000000000002
  BCP3: FFFFFA8008AB20E0
  BCP4: FFFFFA8008AB20E0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Problem on Acer laptop with Windows 7 teacher ITA

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot BlueScreens - answers top 3 (+ 1 more).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ============================================================

  BCCode: 1st 0x0000001E

  Remove ALL power and reinstall all the memory cards and cables (both ends when)
  possible) - in fact, remove and replace - do not just tight. This is for a PC and on all
  that can be done for a laptop is reinstall the memory and clear the vents. Make sure the BIOS.
  low level chipset drivers and key device drivers are all up to date by check manually to the
  manufacturer websites.

  Bluescreens many are caused by the BIOS, drivers from the chipset level low and other main device drivers
  that are not the latest, even if the computer is new. Manually check for updates
  using the methods of updates as indicated in the resolution of the problems above and/or the
  methods below (which are the same).
  
  
  BCCode: 1st 0x0000001E

  KMODE_EXCEPTION_NOT_HANDLED bug control has a value of 0x0000001E. This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  KMODE_EXCEPTION_NOT_HANDLED parameters

  The following settings are displayed on the blue screen.

  Cause

  It is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes include:

  • 0 X 80000002: STATUS_DATATYPE_MISALIGNMENT

    An unaligned data reference was encountered.

  • 0 X 80000003: STATUS_BREAKPOINT

    A breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0XC0000005: STATUS_ACCESS_VIOLATION

    A memory access violation has occurred. (Parameter 4, verification of bug is the address to which the driver attempted to access.)

  For a complete list of exception codes, see the ntstatus.h file located in the directory of the Windows Driver Kit inc.

  Resolution

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques. If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates. Try changing video cards. Check with your hardware vendor for updates to the BIOS. Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, this indicates that a breakpoint coded hard or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame will provide additional information.

  If you don't know the specific cause of the exception, the following should be considered:

  Hardware incompatibility. First of all, make sure that all new equipment installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 in the Windows 7 Compatibility Center.

  Service system or driver faulty device. In addition, a chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, the service may be removed by the system startup by using the Recovery Console and by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help determine the device or driver responsible for control of bug 0x1E. Disable the cache in the BIOS memory could also resolve the error. You must also run hardware diagnostics, especially the scanner memory, provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is incompatibility of the system BIOS. BIOS problems can be solved by upgrading the version of the system BIOS.

  To get a stack trace, if the normal battery monitoring procedures don't

  1. Use the command Ko (display Stack Backtrace) to display the parameters from the stack trace. Look for the call to NT! PspUnhandledExceptionInSystemThread. (If this function is not listed, see the note below.)

  2. The first parameter of NT! PspUnhandledExceptionInSystemThread is a pointer to a structure that contains pointers to an except statement:
     Copy

     typedef struct _EXCEPTION_POINTERS {PEXCEPTION_RECORD ExceptionRecord; PCONTEXT ContextRecord; } EXCEPTION_POINTERS, * PEXCEPTION_POINTERS; ULONG PspUnhandledExceptionInSystemThread (IN PEXCEPTION_POINTERS ExceptionPointers)

     Use the command dd (display memory) to this address to view the data.

  3. The first value retrieved is an exception record and the second is a context record. Use the command .exr (display Exception record) and the command .cxr (display context record) with these two values as arguments, respectively.

• After running the .cxr command, use the kb command to display a stack trace which is based on the registration context information. This stack trace indicates the call stack where the unhandled exception occurred.

Note  This procedure assumes that you can locate NT! PspUnhandledExceptionInSystemThread. However, in some cases (for example an access violation crash) you will not be able to do. In this case, to look ntoskrnl! KiDispatchException. The third parameter passed to this function is a trap frame address. Use .trap (trap Display frame) with this address to define the context of registry to the correct value. You can then perform the stack traces, issue other commands.

BCCode: 1st 0x0000001E<-- read="" this="">
* 1045.html http://www.faultwire.com/solutions-fatal_error/Check-to-be-sure-you-have-adequate-Disk-Space-0x0000001E-

=========================================================

Driver Verifier can help find some BSOD problems:

Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617

How to solve the problems of driver in Windows Vista or 7.
http://www.WinVistaClub.com/T79.html

Using Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

How to use the Windows Driver Verifier Manager to troubleshoot and identify questionshttp://www.youtube.com/watch?v=_VwIDD9xngM Driver

Driver Verifier
http://www.techsupportforum.com/2110308-POST3.html

Using Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.php

How to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngM

You can disable the driver verifier
http://support.Microsoft.com/kb/244617

Start - type in the box search-> auditor/Reset hit enter to disable

BlueScreenView lets you know if there is a driver specified in the error message. Also check with
MyEventViewer at the blue screen.

If DriverVerifier creates a minidump download the and provide a link to it, then we can analyze it.

----------------------------------------------------------



References to Vista also apply to Windows 7.

It's my generic how updates of appropriate driver: (main drivers and BIOS)

This utility, it is easy see which versions are loaded:

-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.html

For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.

Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.

Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.

Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.

Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it) and
Then, get new ones manually if you wish.

Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

==========================================

Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
show a problem.

To test the RAM here control - run 4 + hours or so.<-- best="">
www.memtest.org

For the Windows Memory Diagnostic tool.

Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructions

Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
Diagnostic tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">