Debug the project with CVI2013 problem

Similar Questions

• Replace the charger in the project with sequence Panel

  Hello! I would like to ask a question on the simplification of workflow that is walk around in my mind for years:

  Is it possible to replace an element in the project with a sequence Panel?

  The reason why: I have a music-video with LOTS of cuts between relatively little overall clips. For the adjustment of the colors in the first (or otherwise), I like to keep as much space for easy modifications as possible until rendering and so create a sequence for each clip where I apply these effects at once. In this way, I don't have to go through each occurrence of the sequence in my calendar to change the rating. While this works well if you have done the part of each movie clip before the cut, I have no idea how to achieve this easily once you already have your project cut with clips instead of clip-sequences.

  Is there another way for the effects "on the scale of the clip" that I'm missing? Thanks in advance for the advice and help.
  Best regards!

  If I understand your workflow?

  Can have a look at the ranking of the main element.

  Apply effects Master Clip in Premiere Pro

  For it is possible to replace an element in the project with a sequence Panel? NO.

• How to build the project with library error in adf adf

  Hello

  IM using jdev 11.1.2.3

  in my project I module 2 so we need to build the project with adf dependency libraries...

  Two copies of the way to build the project with trial and error in adf adf

  Timo

• Stabilization of the project with different video settings

  If I open the project with the settings for video 1080 p and then add 720 p video, how can I make stabilization for her? (When I opened a video with different sequence settings it me does not make stabilization)

  Is it possible to work in a single sequence with different settings of the video?

  Images that do not match the nest of parameter sequence first, then add the string.

• deploy the project with Ethercat

  Hi all!

  I need help. I created a project that consists of two parts. The host to run on a Standard PC (HMI display...), that the second part is working on a controller PXI (RT) linked to an Ethercat 9144. I have my project debugging and everything works perfectly, I am able to read variable Ethercat of host, send data to the RT using shared variables...

  To complete my project, I wanted to create an exe for the RT. This is the beginning of my problems. I built the executable, set it as start and deploy the exe to the target. After rebotting target, I started the application on the host... Now, it is impossible to read Ethercat variables and variable shared. If I try to set up the shared variable or the Ethercat for the project, it stops the executable that runs on the target...

  I have not found any documents that describe how to deploy variable Ethercat in an executable... Does anyone have an idea about this problem? any suggestion is welcome...

  When running a windows project, libraries RT SV are usually defined to deploy automatically when the application of the RT is deployed.  Also you can manually deploy libraries SV yourself project.

  Once a SV belonging is deployed on an RT target that it will stay there until eliminated.  You can verify your deployment with Distributed System Manager (DSM) If you see it then you're good.

  Your RT exe cannot deploy its own libraries, they should be deployed in advance.  In addition, you should be able to use the DSM to see the IOV engine on the 9144 chassis analysis even if your RT application is not running.  Check this first.  Also check the on your target RT .alias file to make sure it has the appropriate IP addresses to resolve any URL NSV.

• transfer netlist to the project with 2 models

  I have a project ultiboard with two drawings of Board residing in it. I transferred a Multisim schematic/netlist to the first of the designs successfully, but when I tried to transfer a different/netlist diagram to the 2nd design in the project, he wants to throw the netlist 2nd in the first design exclusively. I tried several times without success.

  I'm trying to do something against the rules here, or should it be transfer to the 2nd design?  Thank you.

  Thank you to attach files. Helped me to understand what is happening. Files in Multisim and Ultiboard design have an identifier that must be unique, and annotation uses this identifier to know which file to annotate to. The problem is that the two files Multisim created from the same original file, then the identifier is the same. However, in Ultiboard only the first design has the identifier, so annotation always selects the first drawing.

  There are several ways you can work around this problem, but the following will work best:

  1. In Multisim, create a new file.
  2. Copy the contents of 2210_Gb to the new file.
  3. In the new file, click on transfer > Export access to card. Save the annotation file.
  4. Ultiboard, ensure that the 2210_Gb design is selected.
  5. Click on file > import > Netlist UB. Select the annotation file, then complete the import.

  Both designs must now have different identifiers, and everything should work as expected.

  In this case, the version 11.0 works in the same way, but annotation has been completely rewritten to 11.0, so, in general, the version is important when talking about problems of annotation. Version 11.0 also handles the case where the identifier is duplicated better, but in this particular case, it would have been unable to make a difference.

  In a concern for the interest, I have the figure of Saint happening by watching the exported files (ewnet) annotation of Multisim. The important line that showed what was happening was (crossprobe {1A3B1023-68AC-4093-8329-885357CD0F2F}, which is the identifier and is the same for the two files of Multisim.

• Message when the project with external link display

  Dear Sir.
  
  I am very fimiliar with Robohelp 6 options. As I've updated from version 6 or 7, things were different. I have a huge project webhelp which consists of many subprojects, in most of them, there are hyperlinks to each other.
  the problem is that whenever I open a project that references an external subject, a message appears saying: (the hyperlink... used in... is outside the flow of the project and do not appear in the project manager)

  This is a standard message and if you like the links are good, there is an option to disable the warning.

  I suspect that you turned off in RH6 and installation for RH7 just brought.

• Cannot save the project with film about WMM 2.6

  Hi im trying to save my movie in Windows Movie Maker 2.6, but it does not let me save all I need a way to record as soon as possible...

  Please give me answers that will help me as soon as possible!

  How many photos? If it's a big project with many effects and
  transitions, it may be too complex for your system resources.

  Are the photos all JPEG (.jpg)?

  Convert pictures in Windows Bitmap (.bmp) image may be worth a try.

  And... before trying to save... it may be worth trying to go to...
  Tools / Options / compatibility... tab and uncheck the box 'all' filters / OK.

• Texturing the model of the project with the high texture layer of the page crashes the rendering queue

  Hello. I am trying to add an overall texture to the model of the whole project by adding a jpg with texture to the top of my diapers and affecting the overlay mode. However, when I try to exit out of the queue to render in format .mov, it hangs and will not be rendered. I use CS6 AE. 64 GB of RAM. Any help would be appreciated on how best to add an overall texture, if this isn't going to work. Thank you!

  

  I'm not really sure what version of AE, you're running; I'll guess CS6.  It is up-to-date, as in version 11.0.4?

  I see that you do NOT multiprocessing, which is good.

  And just as a workaround - just to get the project to the door - you could always rendering on the comp in a lossless codec, then just put the overlay on the imported file, recently visited a new comp.

• How to create the project with mutibple workflow (several BPEL files)

  Hi all
  I am newbie with Oracle BPEL. Now, I need to create a project with a lot of process (I mean a lot of .bpel files). So, how should I do. I see in JDeveloper, I only create a .bpel file in a project.
  
  Can someone help me?
  Thanks in advance
  
  Nguyen

  You can call several BPEL processes in the BPEL process. He will not however be a project. You will need to deploy the BPEL processes to the BPEL process family school and work.

  You say that you have a starting point. You should be able to achieve this with N flows, but another method would be to put a BSE on the front and the payload can call other BPEL processes.

  see you soon
  James

• When you copy, is there a way to set the default printing to the project with HP Photosmart 7510?

  Whenever I use the copy function, I have to go and change the setting for the project.

  Windows 7 (64-bit)

  Thanks for any help,

  Linda

  Hello

  You are welcome. Actually, I took some pictures last night, have not retouched (make it smaller). I don't have them now.

  Kind regards.

• Save the project with function

  Hello

  I need to create an instance of my RoboHelp project. Is there a function as save as or save the project under.

  Copy the Windows directory, open in RoboHelp and rename the project on the file menu.

  You may also like to add this as a feature request. The more of us who do, more it will be included in a future release. You can do so here:

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform & Product = 38

• 7 - the iPhone with camera problems

  Hey guys,.
  UST bought the new iPhone 7 and I already have problems with it, specifically with the camera.
  It's already happened seeral times more that when I open the camera the camera itself App would not focus or react; Instead, simply, you would see a bluish image dark on the screen, and it was not possible to take a picture or anything like that.
  Even after you leave the app and restarting it, it was always the same.

  Anyone else having similar problems?

  Thank you and best regards,

  Laura

  Hi LauraLovesMAui,

  Congratulations on your new iPhone 7! I understand you had some problems with the camera on your iPhone does not display does not correctly. I know it's important to be able to take great photos, so I'm happy to help you.

  You have this problem when using your camera in other applications?

  Make sure that you follow the troubleshooting tips recommended here:

  Get help with the camera on your iPhone, iPad or iPod touch - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Why do we say "a codec is needed" on the watchseries site, I've always used in the past with no problems?

  Laptop with windows 7, something must have gone wrong when I had to fix the latest problem of infections (the Bing bar) to my browser. I loaded the 'codec' (media player classic) but still could not play what I wanted on watchseries.ch... I made sure not to load the entire table of toolbars, etc. with this. These constant problems become ridiculous, fix you one thing and something else is wrong. In any case, I would appreciate any advice.

  Of http://watchseries.lt/tips#htw

  Why videos do not work for me?
  
  You need Flash Player or DivX Player. Both of these programs are used everywhere online; their size is small and will not harm your computer. You should download them from here:
  DivX: http://www.divx.com/en/software/download/start
  Flash: http://get.adobe.com/flashplayer/
  

• Right-click on the image with link problem after upgrade to 11.0

  After the upgrade, whenever I do a right-click on an image with a link, it opens the link rather than opening a menu drop-down. Any idea on what is causing this behavior?

  OK, think about it. Extension: Tab Utilities was the origin of the problem. Uninstall completely solved the problem, disable it does not solve it.