Debugger will not stop at the breakpoint in any project

Similar Questions

• OfficejetPro8500 WirelessA909g: Officejet Pro 8500 Wireless will not STOP PRINT the PAGES of ALIGNMENT - HELP Please

  I do not see or understand what is my problem. Program will not stop alignment, after I print a page from my laptop or a page of the scanner screen. Does anyone have asolution to this situation. Please advise me how to eliminate program alignment running like a mad man every time I print a copy. Way in advance I thank you...

  Have you done the annular alignment process to stop it?

• the system will not stop after the new update

  System was updated with the new updated 05/24 and now will not shut without using the power button / stop what happened, how this can be corrected?

  FWIW, software Wacom has started to cause a problem with OSX 10.11.5. If you have installed you need to uninstall or check and see if the latest drivers Wacom released a few days ago helps. If you have any Wacom software, there are some others mentioned in the CSA programs that cause the same symptom. I don't remember which off the top of my head.

• Debugger does not move to the breakpoints on the device and Simulator

  Hi all

  my Blackberry 9800 recently got updated to v6.0.0.534.

  I use BlackBerry java plugin in Eclipse.

  The details are the following:

  BLackberry Java Plugin version 1.3.0.201102031007 - 19

  BlackBerry Java SDK's 6.0.0.30

  And the JDE is 6.0.0

  First of all, there are some files missing debugging, I have that and earlier was able to debug properly.

  Now he comes into debug mode, but does not touch the breakpoints.

  Hi all

  I've had this work now, I cleaned up the Simulator and then deleted these files:

  . COD

  .jar

  . Debug

  .jad

  . CAP

  .

• Failure — CPU fan comes on full blast when the computer is running. Will not stop unless the computer is off

  Fan comes on full blast when the computer is running. Won't stop unless the computer is turned off, or in low power state. Tech has replaced the fans, problem resurfaced after computer tech left. Everything else seems to work very well. Dell XPS One (all-in-One), Intel Core 2 Quad CPU, Q8200 @ 2.33 GHz, 4 GB RAM, OS, Vista 32-bit

  I suggest you get back the Tech to fix it properly this time, because they have replaced the fan.

  Or try Dell Support/Forums:

  http://support.Dell.com/

  Dell support at the link above.

  http://en.community.Dell.com/support-forums/default.aspx

  Dell's Support Forums at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows XP on my laptop will not stop from the start menu.

  It goes to the screen that says Windows stops, but he never does.

  Hello

   
  1. do you get an error message/code?
  2. don't you make changes to the computer before the show?
  3. which antivirus program is installed on the computer?
   
  This problem can occur if a third-party program or application prevents the computer to shut down.
   
  I suggest for the link and follow the steps in the article:
   
  You cannot log off, restart or shut down your Windows XP-based computer
  http://support.Microsoft.com/kb/831431#top
  -Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  -ATTENTION: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  In addition, the link and follow the steps in advanced troubleshooting.
   
  Your computer stops responding when you try to shut down in Windows XP
  http://support.Microsoft.com/kb/313290#top
  -Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
  -Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
  -Note: Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Audio video will not stop in the background

  I have the series of videos youtube/mp4 on the timline and navigation to go to the timeline from different points of navigation.

  When I play the video it works fine but when I click on my navigation to go to another point of navigation audio still plays in the background.

  I made sure to turn off my dropzone content at each point, but she still plays. the only way it stops is when I hit the pause or stop before you click my navigation manually.

  Does anyone know how to prevent this?

  I figured out how to reset the video from Youtube to go underground with the response of Heathrowe and FigFrance contribution to the thread found here:

  https://forums.Adobe.com/message/4979969#4979969

  The secret has been adding. empty() for my video container.  Here is my button code works:

  
  

  See the video:

  code to embed youtube in symbol

  YouTube var = $("");

  SYM.$("video"). Empty(). Append (YouTube);

  YouTube.attr ('type', ' text/html "");

  YouTube.attr ('width', ' 640');

  YouTube.attr ('height', ' 360');

  YouTube.attr ('src', 'https://www.youtube.com/embed/MyFv6UKsW70?rel=0');

  YouTube.attr ("frameborder', '1'");

  YouTube.attr ('allowfullscreen', ' 0');

  Display an item

  SYM.$("video"). Show();

  Hide videos:

  SYM.$("video"). Empty();

  Hide an element

  SYM.$("video"). Hide();

  Brandon

• After the Macbook to Yosemite 10.11.15 update, it will not stop

  I have therefore updated the latest version of Mac OS x at 10.11.15. During installation, all work fine including the reboot and restart the macbook. But when I tried to stop my Macbook, it will not stop. The macbook has not frozen, but the tab is disappear after click on stop. Now, I have the macbook shutdown by pressing the power button / stop. Is there a solution?

  Software for Tablet Wacom has been proven to show this behavior. Uninstall or try to remove your connection point

• Debugger does not stop at breakpoints

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• Debugger does not stop at breakpoints for some applications

  The debugger does not stop at breakpoints for most of my applications.

  I also created two new projects using the templates provided to Hello World, for a project, that it stops on my breakpoinbeing the first line to the breast

  ApplicationUI::ApplicationUI () :

  QObject()

  Sometimes, for the second project he doesn't stop... very frustrating.

  I tried this on two separate devices, either via wifi either by using the USB connection.  I'm running this on a new thinkpad with tons of ram and an ssd, Os is Windows 8.11 and I installed the 64-bit version of momentics...  I also tried to use the SDK 10.2 and 10.3 with the same results...

  Very strange, I copied the project in another directory and then it re-imported in the workspace and then debug started working again.

  Must have been a thing of directory permissions.  in any case, I just wanted to post the resolution of other interests of peoples...

• Look at the maps app will not stop

  When I look for direction in the maps on the watch application, it will not stop after that. I looked for directions to the airport, and then it does not cancel and kept taking me to the airport. I have ensured the application Maps on my phone was not working and he cancelled it but always watch will not stop.

  I tried it yesterday and now today the watch gives me directions to the airport.

  I tried to remove it from the docking, restarted my watch. Watch app from the phone Checked, but nothing works.

  Hello

  To stop your watch directions: open the Maps app on your watch > firmly press the display > press on for policy decisions.

• The SPACEBAR keystroke will not stop.

  My iMac recently started having a problem where the system gets a touch SPACEBAR which will not stop. I think that is what is happening based on the spaces added to the text on the screen in different applications, and from the keyboard Viewer which shows the SPACEBAR constantly depressed.

  This isn't a device keyboard problem. I tried several keyboards. I also tried to unplug all connected to the mac and rebooting. The problem persists. I stop after several reboots (which seems a coincidence). I have also reset the PRAM, which seemed to have fixed, but now he is back (after about 24 hours).

  I don't know what else to try. I have not installed new hardware in the computer, since I bought it (upgrade of ram). It worked fine for 1.5 years.

  Try resetting the SMC by iMac SMC and PRAM reset, it may take several resets to work.

• Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings.  How do I change AM/PM?

  Siri will not stop me give a military even if time the "time of 24 hours' has been disabled in my settings.  How do I change AM/PM?

  What you have for country & region and what default language.

• Loop will not stop when you press the stop button

  Hello

  I have a LabVIEW program that includes a number of loops, but one of my curls (which surrounds a series of functions "Write TDMS") has a Boolean stop that transmits a signal through two GOLD and functions in a control of the loop (see aea of interest). My problem is that when I press the button stop the loop will not stop and will continue to save and write data that I didn't need a file.

  Could someone please help with this?

  Kind regards

  Aaron Broady

  
  

• whenever I connect to the web, windows setup will light up. He continues to ask the companies to office and will not stop. He interrupts everyone and everything that I do everything online

  I can't windows to stop coming on and asks me to install the desktop business drive. It starts as soon as I connect and will not stop, interupting everything what I do online

  Hi marcus,

  1. What is the full error message that you receive?

  2. have you recently trying to install a program on the computer?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then repair Microsoft office on the computer and check if it works.

   

  How to understand the repair feature in Office 2003 and Office XP

  http://support.Microsoft.com/kb/822238

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.