Debugging in CF Builder with ColdFusion 7?

Similar Questions

• Interview with debugging on Flex Builder 3.0 version

  Hello

  When you debug in FLex Builder 3.0 version, is possible to control from a breakpoint to another break Point?

  Means if I use F6 (Step-Over), it's to go line by line, I don't want this execution line by line, is possible to go directly from a breakpoint to another break Point.

  Waiting for your answers.

  Thanks in advnace.

  Yes use F8

• Debug Player Flash Builder burrito

  Is there a player of debugging on the release of Burrito FB? Mine has been to complain about the version of the player when I went to debug. I installed the latest version and now he isn't complaining, but I get no trace (which usually means the wrong version of the debug version).

  I have to reinstall FB (B) and hope for the best, or someone can direct me to a download of stand alone?

  See you soon!

  Hello

  There is a known bug with the pre-release of the trace() calls disappear when an FXG file is present in your project and creation mode.

  Can you please confirm if exit design mode by activating / disabling window-> Fashion Design allow, to restart Flash Builder with a clean project brings back traces for good?

  PS: It is in the release notes - http://labs.adobe.com/wiki/index.php/Flash_Builder_Burrito and this is the bug - https://bugs.adobe.com/jira/browse/FB-27654

  Thank you

  Rémy

• CD read - Error Message: Build with Autorun CD Studio has stopped working.

  I am running Vista and have had no problems reading CDs or DVDs.  However, I have a CD of my teacher built with Autorun, who will not play on my computer.  I tried 2 different copies without success, but the 2 same CDs play on all computers in the school and on the computers of the other students.  I have Microsoft Powerpoint and Word, that are required to read the files on the CD. When I insert the CD, I get the opening menu, but when I try to select any specific topic, I get the error "Build with Autorun CD Studio has stopped working" message.  I have downloaded and run the Microsoft FixIt! Program diagnosis/troubleshooting of Microsoft Support, but he could not find any problems.  I need this CD for upcoming classes and don't know what to do?

  Hi pinkpugsy,

  1. are you able to browse the contents of the CD using Windows Explorer?

  It looks like Autorun CD Studio program is defective. We recommend you to uninstall and reinstall the Autorun CD studio software on your computer and check the difference.

  Note: before you remove the software, make sure you have the Setup file of software with you.

  Step 1: Uninstall or change a program
  a. see Uninstall or change a program
  b. Once you have uninstalled the program, restart the computer.

  Step 2: Install the Autorun CD Studio software. Once you have installed the program, restart the computer and check the difference.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Consumers with ColdFusion DataServicesMessaging Gateway selector

  Is it possible to filter the messages through consumer selectors when using BlazeDS with a ColdFusion DataServicesMessaging event gateway? I can't get the following to work:

  In my Flex client, I agree with the following code:

  
  

  var selector: String = "someid =" + this.someID; ".
  selector = myConsumer.selector;

  myConsumer.subscribe ();

  I produce a message with the following code:

  var asyncMsg:AsyncMessage = new AsyncMessage();
  asyncMsg.body = data;
  asyncMsg.headers.msgtype = msgtype;

  asyncMsg.headers.someid = this.someID;

  asyncMsg.headers.gatewayid = "TestMessagingGateway";
  myProducer.send (asyncMsg);

  And in my event gateway, I have something like the following:

  < cffunction name = "onIncomingMessage" retruntype = "any" >
  < cfargument = 'event' type name = "struct" required = "true" >

  < cfset var msg = StructNew() / >
  < cfset msg.destination = "ColdFusionGatewaySecure" / >
  < cfset msg.body = arguments.event.data.body / >
  < cfset msg.headers ["someid"] = arguments.event.data.headers.someid / >
  
  < cfreturn msg / >

  < / cffunction >

  However when I test the code, all customers receive all messages sent to the ColdFusion event gateway. I would like expert that they only get messages with a someid header that matches that specified in the selector. (I confirmed that the message I get from the gateway has a someid header that does not correspond to that specified in the selector). Does anyone have experience using the selectors with ColdFusion event gateways that are likely to shed some light on what I'm doing wrong?

  Thank you

  -Nathan

  Hello. So, I took a glance at the code in CFEventGatewayAdapter with the developer who wrote it. Selectors are not taken in charge right now even if it looks like the difficulty of getting this job would be quite low. I logged an enhancement request to get this fixed/added.

  https://bugs.Adobe.com/jira/browse/BLZ-388

  -Alex

• Problem with Coldfusion 7.0.1 IIS6.0 and Perl

  Hello
  
  I have a bit of a weird problem that I can't understand. We
  run an application coldfusion 7.0.1 Server
  
  We also use a custom built-in perl program that performs authentication
  on some of our pages and read/write on a cookie.
  
  Here is an example of a URL that would redirect the user to the
  Perl script login screen, authenticate and direct the user to the
  page specified in the URL
  
  https://127.0.0.1/CGI/bluestem/lb_login.pl/CF/index.cfm
  
  This URL will be redirect the user to the /cf/index.cfm path after the
  authentication by the perl program.
  
  My problem is that the URL above allows to work very well with Coldfusion 6.1
  and IIS 5.0 and it also worked well with Coldfusion 7.0.1 and IIS 5.0
  but when I try to do this with IIS 6.0, it throws a missing model
  error. I did some research and found out that instead of running the Perl file, she tries to find the CF file on the location of /cgi/bluestem/lb_login.pl/cf/index.cfm that of course does not exist.
  
  The most interesting thing is that this URL is the same as above, but it works!
  
  https://127.0.0.1/CGI/bluestem/lb_login.pl/CF/
  
  It seems that the problem occurs when there is a .pl and a .cfm extension in the URL.
  
  Any ideas?

  I found the solution to this problem. I have all of my perl scripts in a virtual directory. This virtual directory has all of the Coldfusion files. What I've done in IIS 6.0, I click with the right button on the virtual directory and go to properties. From there, I click on configuration. You will see a section "wildcard application maps (order of implementation)" here. There will be only one entry in it, something like C:\JRun4\lib\wsconfig\1\jrun_iis6_wildcard.dll.

  This mapping of wildcard characters should be deleted for perl scripts redirect to the right page. Delete this generic mapping will also remove the ability to run ColdFusion templates in this virtual directory.

• Running/debugging on a device with Flash Builder 4.7 on OSX 10.9 (Mavericks) and iOS7

  I can't start my Mobile Actionscript project on a device that has installed iOS7. He received this error.

  Error occurred while installing the application:
  Invalid <device> specified
  

  I can still deploy on my other device with iOS6, I'm under FB4.7 and OSX 10.9. Has anyone else seen elsewhere?

  Hey ghelton,

  This may or may not help your cause, but I can say that I have the same configuration that you mentioned and can deploy on iPad Mini 6.1 and iPhone 5 7.0 with no problems after rolling back my version of Java to 1.6.

  You have the latest version of iTunes installed so that you can view your device iOS 7 in without any problem?

  If you have Xcode, you see your device to the organizer and if so, it is not grayed out?

  You have authorized system events in the privacy of security & > privacy > accessibility in system preferences section?

  Hope that helps,

  O.

• ColdFusion Builder with Apache 2.2

  Hi all

  I have ColdFusion 9 Beta installed on an Apache web server. It works fine, but when I tried to add a server, but the only option I have is a JRun server. Am I missing somethig? Is only CFBuilder working for standard stand-alone installation on CF9 for now?

  Thank you

  Can you check when adding the server have you checked (enabled) the box 'Enable SSL' on the first page of the wizard of server?

• Impossible to debug the example provided with the SDK projects

  Hey there.
  Just recently I started learning the SDK AE. After reading the first two pages of the Guide to the software development kit, I decided to try to build/debug examples of projects in visual studio.
  I tried with the model project "Skeleton" and with the "Resizer effect" project, but the two I can't seem to make it work.

  I set the environment variable AE_PLUGIN_BUILD_DIR for the correct path, and I also made sure visual studio debug using AfterFX.exe
  However, if I try to launch the visual studio debugging (F5)... nothing happens. After effects opens, but nothing happens after that.

  I checked my output log and... Well well full of messages like:

  
  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\AudioFilters.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\ProjectConverterHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\TransmitHost.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\DisplaySurface.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\FLT.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\RG.dll. Cannot find or open the PDB file.
  There are many more of these erros... basically for each DLL in the \Support Files\ folder.

  At the end of my output log, I have the following:

  < 5060 > < AppVers > < 5 > App Version = Version 13.5.1.1x48

  < 5060 > < AppDirs > < 5 > App Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  The executable < 5060 Dir > < AppDirs > < 5 > = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Resources < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  Package < 5060 > < AppDirs > < 5 > Dir = C:\Program Files\Adobe\Adobe After Effects CC 2015\Support Files

  < 5060 > < AppDirs > < 5 > Plugin Dir = C:\Program Files\Adobe\Adobe after effects CC Files\Plug-ins 2015\Support

  < 5060 > < AppDirs > < 5 > required Dir = C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\Required

  "AfterFX.exe" (Win32): loaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll. Cannot find or open the PDB file.

  "AfterFX.exe" (Win32): unloaded "C:\Program Files\Adobe\Adobe after effects CC 2015\Support Files\aeres1.dll.

  The program ' [3244] AfterFX.exe "ended with code 0 (0x0).

  
  

  
  

  Can someone tell me what I'm missing?

  Well, it is normal that if you launch AE in the debugger, nothing different happens if you launch AE normally. Which means that you must create or load a project and apply your plugin, so you can stop in the debugger (unless you want to catch global initialization, which is made on the loading of the program).

  With regard to the PDB messages in the journal, which is quite ok, as the Adobe dll plugin obviously would not come with debug information.

  The plugins you've compiled are born actually in the correct path? They are available in the menu effects in AE? It is the first thing to check, because when there is not this plugin, debugging is not available :-)

  I interpreted your question so that your .aex files are actually present and visible on EI, you just can't break into the debugger when one of them is used.

  So for your plugin, you must make sure that it contains debug information, otherwise you will not be able to debug.

  Please check the following settings for your project in Visual Studio:

  "C/C++" - "Debug Information Format" value "Program Database"

  "C/C++ - preprocessor"-"Preprocessor Definitions" string contains the "_DEBUG" set

  "C/C++ - Code generation '-'Runtime Library' is defined is ' / MTd ' or ' / MDd" (this is the most common error when unable to debug!)

  ' Linker - debugging - 'generate debugging information' set to 'Yes "".

• Debugging a viewer customized with Safari

  I try to use Safari-tools to debug the custom viewer/showcase, I currently build, but it does not work. I read that it should be possible to do?

  I activated the "Web Inspector" - option in IOS but Safari gives me that "no inspectable requests '." I'm running an iPad with ios 7.1.1 OSX with Safari 7.0.3 10.9.2. What Miss me?

  Finally, after the upgrade to the Mavericks, I was able to run it again. I could never work with v6.1.x to 10.8.

• error debugging in flash builder 4

  The message I get is:

  "Installed Adobe Flash Player is not a debugger."

  C:\Windows\System32\Macromed\Flash\NPSWF3d.dll

  Flash Builder cannot locate the required Adobe Flash player debug version. You should perhaps install the debug version of Flash Player or reinstall Flash Builder. »

  Any help with this message? I tried the "download the Flash Player 10 ActiveX Windows control content debugger (for IE) (EXE, 2.12 MB)" but that doesn't seem to work. My version of flash for the two firefox / other and internet Explorer are up to date. I even uninstalled flash player and made sure to get the latest versions for both.

  Thanks for any help you can offer.

  -Matt

  NPSWF3d.dll is used by Firefox/Chrome 4.

  Install the "Plugin content debugger": http://download.macromedia.com/pub/flashplayer/updaters/10/flashplayer_10_plugin_debug.exe

  If you're on Chrome 5, you must go to about: plugins and disable the flash player grouped output he picks up the player debug installed.

  -Remy

• How to make the bin-debug HTML file compatible with Firefox

  When I build the program, it creates this HTML file in the bin-debug output folder.  The file works fine with Internet Explorer, but when I use Firefox, it's just a blank white page.  In any case so that it works with IE and Firefox?

  Here is the code above, if you want just a shortcut:

        
  
        
  
     
        
  Alternative content
      
  
  
  
  
  

• Installer build with VISA

  Hello

  Recently, I developed a simple application that needs VISA to read and send data from the serial port. When you try to build the installer, I gives an error about the source files of visa as an extra Installer. I have no media installation with me (I have just my laptop), so how can I work around this?

  Thank you

  The simple solution is to download the runtime of visa or directly and reinstall it, LV automatically updates the location of the installer.

• App Builder with dynamically loaded VI - please help

  Hello

  Please take a look in the ZIP file attached with the sample project. The appellant load sub dynamically. This works well in the development environment (LV 2011) but when I build the EXE, it stops working. Please take a look; Ideally, repost fixed project in this thread, others to take advantage of the way to solve this problem...

  Thank you!

  JorgeinSD

  Hi Jorge,.

  This is the problem of the ususal: in the executable path to your dynamically loaded VI Exchange.

  You have defined to be included in the executable. If the path passes to Appdir\DynLoad.exe\LoadMeDynamically.vi, but you try to open the path AppDir\LoadMeDynamically.vi...

  Options:

  -check the execution (by the property node) environment to decide which way to use

  -change the location of the VI to "support the directory", this will be a folder named 'data' next to your executable file. Call the VI of this folder. You can do the same thing inside your project to have the same calling conventions in the development and runtime environment...

• Building with compile.exe made inconsistent project CVI

  Hi all

  I have to build CVI projects using the command-line compile.exe. It works well, except that after compiling when I open the project with LabWindows/CVI, files (.h, .c, .uir...) are not sorted by category more (source files, Include files, User Interface Files) in the project tree.

  Build DLL projects and I use autoincrement the version number. When I disable the AutoIncrement, the problem

  disappears, but I absolutely need this option enabled.

  Is there a solution to keep the files sorted by category after compiling from command line?

  Thank you

  David

  PS: I'm using LabWindows/CVI 2009 (v9.1.0).

  Hi David,

  This looks like a bug. I was able to reproduce the problem and wrote a bug report (id: 240425). It will be fixed in the next version of the CVI.

  From now on, I'm not aware of any workaround. Once the bug is the subject of an investigation I'll let you know if we find something.

  Sorry for the inconvenience!

  Luis