deep sleep mode.

Similar Questions

• Satellite C665-p5010 - question deep sleep mode the installation of ethernet

  I get the question of deep sleep mode when installing ethernet in my laptop Toshiba C665.
  Even I tried plugging the cable Ethernet to the sound have not activated

  Pls help me in this situation.

  In Device Manager Ethernet to hidden state.

  Please can someone update on this issue...?

  What exactly do you mean by deep sleep mode?
  Which driver Ethernet have you installed?

  Ethernet could mean driver LAN or WLan.

• FindFile failed. Realtek network controller was not found. If Deep Sleep Mode please connect the cable.

  So far, I went through 3 different network since that on my motherboard (z77 Extreme4) cards is dead. I always get the same exact error, has a restored system, reset the cmos, etc.. Any ideas on what is wrong?

  Finally, I resolve this problem.

  My system has been recommended to Win8, but I didn't like it, then installed Win7, all driver installed fine (I installed the drivers provided for 8 to 7) except LAN.

  My network controller was Realtek PCIe GBE Family Controller. Installing it was an error called "find file failed" followed by "unknown version".

  So what I did is, uninstalled Realtek PCIe GBE Family Controller in Control Panel.

  then for the Realtek site

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false (link may not work a while, you just look for the query.)

  then from there download driver "Win7 and Server 2008 R2 Auto Installation program (SID: 1669850) ' (possibly in second row, 6011 k). Install it.

  It was smooth installation, now any file.

  Hope this helps. See you soon

• Qosmio X 500-116 - goes into a deep sleep

  I had the computer above since February 2010, and over the years, I had a lot of problems. I was brought not to use it as whenever he gives me problems.

  Today, I thought I would try to see if I can find a solution. I turned on after charging the battery for about an hour and it started in about a minute, not bad. I've updated my Norton Internet Security, it's over and I checked my emails incoming and sorted. I left it for about 10 minutes (had a cup of coffee). my back, the screen was blank and I can't get the screen lights up at all. Happening almost6 whenever I try to use this computer.

  Was the only one to get things going is to press the Start button until the laptop stops. Press the button to start it, she, then crosses all loading windows files once I selected "Safe Mode" I tried all the suggestion of options and never led. If I simply select Restart things return to normal. I can connect and everything seems ok. and I can do what ever I need to do t.

  I try to keep active, if I leave it at any moment that it goes back in the fatal sleep.

  I ran Norton "Scan now" on the two hard disks, no problems found.

  There are a few times, I saw a strange color screen (multicolor), not what I would describe as a blurry screen. I wondered if it might be a graphics card problem, maybe not.

  Any suggestions?

  Hello

  It is quite difficult to understand why this happen. You wrote about the deep sleep. How to understand this?
  Deep sleep is for me the status of hibernation, but if I understand you just your laptop is on but just your view is DISABLED. Can you confirm this?

  Have you tried to change the options for standby power, hibernation or even show OFF?
  Check out all the options and set it to "never."

  What happens when you do this? The same reaction after 10 minutes again?

• Z5 (E6653) restarts when wake up from "deep sleep".

  Bag even without SIM and SD and full battery. Repair with Xperia companion didn't help. System of 6.0 to 6.0.1 update (this sloved for me to question fingerprints), so don't want to go back to version 5.1.1 stock system.

  Everything works perfectly, except that. When restarts always try to wake the phone. Reboots up to 20-30 per day. Go to the "deep sleep" after 15-20 min. No reboot when the phone is in use.

  Tried ULTRA-endurance - problem still occur. Do not try again 'safe mode '. Maybe help to uninstall applications? Don't use not of third party apps. Maybe you can somehow turn off sleep mode or changing the time of 1 hour or use some special soft? I ' am of ideas.

  I picked up cell phone to the store where it was repaired. Have the new motherboard and other things have changed. Everything works perfectly now.

• Printer Laser E310dw from Dell not deep sleep... awake or sleep also.

  As the title suggests... my E310dw don't wake up from sleep... never. No matter what I tried cycling power, cancel button, settings, etc. I have the printer in wi - fi mode and it appears offline on all computers, I use to try to access it. To make things more frustrating, then all of a sudden it will print what I wanted printed. Did not understand that the key is to get this to work.

  Any help please?

  Thank you.

  I have disabled deep sleep because the printer would always disconnect from the network and I have to restart the printer to print.  Since I have disabled the function of deep sleep, I got no problems.

  From the control panel go to general settings / ecology / time to sleep, when the display shows 1 min press the back button and the down button simultaneously.  The display should now say deep sleep.  now select disabled and out back.

  To disable the functionality of deep sleep.  Hope this helps, even thought technical support because there is no way to disable deep sleep, and I was banging my head against the wall, whenever I had to reload.

• U2415, Nvidia GTX 950, monitor wake up after the deep sleep?

  I have two-desktop monitor. We're U2415, connected via mini - dp-> DP and the other is U2311H, connected via DVI on my Strix Nvidia Asus gtx950 video card.

  When starting PC, DVI monitor is always first & fastest even if it's my secondary monitor, but this isn't a problem.

  However, the real problem is when to wake up my PC after monitor deep sleep DP (30 minutes, several hours or more) won't wake up at all. It stays black. I have to manually, press the 'power' 2 times before monitor finally wake up and restoration of 2 desktop screen.

  Before NVIDIA, I got an AMD card and this was never a problem (although I used to connect to U2415 via HDMI). I used the tool to remove all previous video drivers. I'm also using the latest Nvidia drivers, 10 x 64 windows.

  I must point out that when you wake up to a short sleep mode, everything is fine. If I wake up monitors in less than 30 minutes, or so they work as should. I also activated 1.2 DP see if the problem will be solved.

  I am ready to suggestions, what I should check then in Windows, monitor settings etc. ?

  Thank you!

  Looks like the Nvidia driver is slow to launch the DP communication CDM from deep sleep causing the monitor to think that nothing is connected. You could try to test a DP to DP cable and see if the problem persists. One solution would be to connect in this way =
  NVIDIA GTX950 DVI out--> DVI to DVI cable--> DVI U2311H in
  NVIDIA GTX950 out HDMI--> HDMI to HDMI cable--> U2415 HDMI in

• Apple 4th Gen tv - "sleep" mode

  With the last s/w update, my Apple TV is not in sleep mode when running applications. It worked well with the prerequisite s/w. The most notable are the runtime of Netflix and NF completed streaming. If I exit NF at the main menu, "sleep" mode works very well.

  I contacted NF, and they said that this is not something they can control or effect.

  Any suggestions on how to remedy this situation?

  Works fine on my system. What is happening exactly?

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• second monitor is not on after the "sleep mode"

  HI, I have an iMac of 2014 and an AOC monitor as a second screen, when my iMac goes into sleep mode and then re - wake up he does not recognize the AOC monitor and goes back to be one screen on the iMac. I have all the latest downloads and I am running OSX El Capitan

  What cable you use to connect to the screen. My friend had the same problem with a HDMI cable, it has opted for a thunderbolt cable and never had the problem again. Hope this helps, good luck to you,

  ~ Michael M

• End of 2015 iMac 27 inches 5K screen lights up when the "sleep mode"

  When the iMac is in "standby", sometimes the display lights for a while and then turns back off the coast. Screen does not completely, simply turn the backlight (it's like when you see a black image with the high brightness level).

  I know the iMac turns once in while when the "sleep mode" to access the internet and such things, but I don't like the screen turn on like that.

  Is there a question?

  Thank you for your collaboration.

  Probably not a problem, but to be sure that you can post a report EtreCheckon your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• iPhone 6s more going in as a sleep mode when sitting is not.

  iPhone 6s more going in as a sleep mode when sitting not used. I won't get it any delay message notifications until something wakes the phone as a call or unlock the screen. Sometimes, he sends even calls to your voicemail and imessages simply sit not showing not delivered to the other side of people. Seems to happen only when connected to wifi. Anyone facing this problem or have any suggestions? I checked all the settings that I even tried to leave it plugged to load and forever changed the automatic locking.  When that happens all notifications go out at the same time as overload and the sound does not come through them just the notification screen on... Help!

  Is do not disturb on? Icon of Crescent Moon at the top right

  If yes it off using the control center

• How can I fix the very slow response after the wake up the computer from sleep mode?

  Never had this problem until a few days ago. Using Windows 7. I want to use the "sleep mode" whenever I leave my office (be it for a few minutes or several hours). Always came back just as I left it (tabs, work-in-progress, etc.) until recently. If I reboot, everything of fine, up to what I use mode "time" again. So painful.

  Thanks for the tip. I disabled the accelerator according to your link and suggestions and the problem seems to have been resolved, at least for now!

• How to disable sleep mode

  How can I disable mode 'sleep' in order to download a new large piece of software. The "sleep mode" begins after I leave the computer to download.

  Hello, this is a problem with the operating system - please refer to http://windows.microsoft.com/en-us/windows7/Sleep-and-hibernation-frequently-asked-questions