Satellite C665-p5010 - question deep sleep mode the installation of ethernet

Similar Questions

• Satellite C665-p5010 - no sound

  I have Toshiba Satellite c665-p5010, after installing the Audio driver, I can't hear the sound...

  The Audio driver is not installed correctly... .and I can't uninstall the Realtek Audio driver which is installed...

  Can you please tell me the right Audio driver for my laptop... I had installed Xp SP2 on my laptop.

  Hello

  > Audio driver is not installed properly... .and I can't uninstall the Realtek Audio driver which is installed...

  What card his cell phone does support?
  Check in the Device Manager in audio, video, and game controllers

  Is there a yellow exclamation?
  Did you check if the sound is not muted?

  I googled a bit, an it seems that the laptop belongs to the Asian series of Toshiba.
  I found the drivers here:
  http://www.Toshiba-India.com/laptop/DriversDetails.aspx?product=notebook%20Computer&se ries = Satellite & model = C665 & cat = Sound & os = 0

  It seems that various models support different sound chips so its important to know what sound chip this laptop supports.

  Moreover if just the audio driver has been installed, then the Device Manager may not contain no yellow exclamation or unknown devices.

  By the way: you can uninstall the audio driver in Device Manager

• deep sleep mode.

  I did a system restore factory on my hp Pavilion a6312p, now I can't connect to the internet, a message is popping up saying YOUR ETHERNET CONTROLLER IS in DEEP SLEEP MODE, please PLUG IN CABLE, my cable is plugged in, help please. someone told me to reset the BIOS, I did this and it did not work.

  A Google search, this seems to be a common problem with the Realtek your machine a. integrated ethernet card I would probably just buy a real network card and install it. Regular PCI network card could be used in the slot of this modem dialup now. Or if you have two PCI Express x 1 slots.

• Vista home PR., after that "sleep" mode, the computer wakes up not (dell inspiron 530)

  Dell inspiron 530 vista PR. House, after the "sleep mode" the computer doesn't wake up. The mouse works fine. (the computer is set to wake you up at a mouse click)  When I click the mouse fan goes up like to spend awake mode, but fan and the power light continues to blink.  I press the power button once and stop the computer, then the computer says recovery and gets stuck again. Then I turn it off again and it completely restarts and the power led will stop blinking and I'm back in business. -arg... Help! Thank you.

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  A Windows Vista-based computer resumes the mode not sleep if you move or click a USB mouse as the computer is switch to sleep mode

  http://support.Microsoft.com/kb/930091

  Method 2:

  Refer to the section "Why doesn't my computer go to standby or hibernate as expected, or why he wake up suddenly?" the link mentioned below.

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Satellite Pro T130 - problems in sleep mode after you install the update wireless

  After installing the 3G modem & updates on day of Wireless manager from 29 September, my laptop began to have trouble waking sleep mode. Most of the time I had to hard stop. I solved currently the changing options issued for the "sleep mode" in the Panel, for the most part by turning off the advanced features (hybrid sleep, sleep, sleep network adapters usb). However, I want to solve the problem no doubt, as the current options require more time to enter the mode 'sleep'.

  My laptop is a Toshiba Satellite Pro T130 running under Windows 7 64-bit.

  Please help us :-)

  You have installed the updates recommended by Tempro?
  You can send us you have installed versions?

  I assume that with the old versions you didn t have this problem?

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer

  When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.

  I've updated the BIOS and it is not fixed.

  Hello

  Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
  Have you tested the laptop with the factory and preinstalled Toshiba system parameters?

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

• Satellite U - restarts and restarts so that the installer of Windows 7

  I just bought my new laptop Toshiba from Harvey Norman.

  When I try to put in place, it just restarts again and again and I can't do anything to stop it.

  It says installation configuration. Harvey Norman is trying to tell me that it will take hours for the Installer (at least 3).
  I want to know is this normal or is something wrong.

  Hazza 89

  It's normal. I noticed the same thing with my Satellite A500. The installation of recovery were finished in 40 minutes only, but later with all the reboots, it took more than 1.5 hours.
  It is therefore normal. Just be patient. Everything will be ok.

• Re: Satellite U400: operating system not found then the installation of the OS

  I have a toshiba satellite u400 with is come with VISTA.

  Because I don't like VISTA, I then installed WINDOWS XP with a multi boot.

  Everything worked well. But one day I want to resize my partitions I used Paragon partition manager.
  This product is required to operate only to resize my xp partition, so he asks me a start.

  And then nothing works.

  I try to fix my problem with a fresh install, but it seems that the boot sector was not correct.
  Then I completely format my hard disk on another computer with a USB CABLE.

  When I try to install VISTA, XP or LINUX on a CD or DVD, I ask the multiboot with F12
  I chose to boot from the CD/DVD built-in, but I get only "OPERATING SYSTEM NOT FOUND',

  It's as if the BIOS test the HARD to FIND something specific, and it does not find.
  When my PC worked correctly I could boot from the drive to dvd without problem.

  I called the SUPPORT CENTER of about 10 days, but I have no answer.

  So if someone could help me.

  Thank you.

  Hello

  OPERATING SYSTEM NOT FOUND message appears generally if the laptop has attempted to boot from the HARD drive and didn t find the operating system.

  But I put t understand why you formatted the HARD drive using the USB cable?

  Please insert HARD drive in the Bay of laptops HARD drive and check if the HARD drive is recognized in the BIOS!
  If the HARD drive has been recognised so I recommend you to take a disk Win XP Home and at the start of this disc.

  As I m not wrong not you will need to first install the SATA drivers to recognize the HARD drive.
  The fact is that the laptop supports the SATA controller and SATA drivers are needed to get the HARD drive recognized by Win XP.

  Well, after you have booted from the Win XP disc you need to format the new HDD by using the NTFS file format and should then follow with the installation of the OS.

  Check it out

• Satellite A200-1QZ: No. HARD drive during the installation of XP

  HIII,

  I have a problem!
  I have my laptop (satellite A200-1QZ) buythis for everyday, it is with Windows Vista: (((I don't like it!

  I download driver xp for any material!
  I would like to install Win XP SP2 cd boot but it's error message, when I access the installation,< harddisk="" can't="" found="">>!

  I think that the mistake is on the SATA - HARDDISK? orrrr

  Please help me: p
  and happy new year...

  You must install the Intel Matrix Storage Manager first.

  This issue has been described many times here in the forum.

  I would really recommend to use the advanced search option forum, if you need details ;)

  Best regards and happy new year friend

• Two questions on ASM for the Installation of the grid

  Version of grid Infrastructure: 11.2.0.3

  Platform: Oracle Enterprise Linux 5.6

  Question1.

  Oracle: dba will own our grid software (not network user). What should be the permission set for the LUN (/ dev/sda1,..) before the installation of the grid?

  Question2.

  Currently shared LUNS appear in the form

  / dev/sdb.

  / dev/sdc.

  / dev/sdd

  is a single partition must be created before LUNS to ASM?

  For example, I should choose p (primary partition) below. Right?

  # fdisk/dev/sdb

  Device contains a table of the MS-DOS partitions, valid Sun, SGI, or OSF disklabel

  The construction of a new partitioning BACK with disc 0x8b157fd2 identifier.

  Changes will remain in memory only, until you decide to write them.

  After that, of course, the previous content is not recoverable.

  WARNING: invalid indicator 0 x 0000 partition table 4 will be corrected by w (rite)

  WARNING: The DOS compatible mode is discouraged. It is strongly recommended to

  off mode (command 'c') and change the display units to

  sectors (command 'u').

  Command (m for help): c

  Indicator of compatibility BACK is not defined

  Command (m for help): u

  Change of units of display/entry to the sectors

  Command (m for help): n

  Control action

  extended e

  p primary partition (1 - 4).

  Check step 5 here. You use oracleasm utility that changes the permission.

  Infrastructure of network for a stand-alone server installation

  Ta

  JAG

• Satellite L735-10V - unable to connect to the internet using ethernet

  I have problems connecting to the network via ethernet.
  connect the ethernet cable and the laptop connects to the net, but after a few seconds it disconnects.
  I don't know what the problem is.

  I tried to disable TCP/IPv6 and it doesn't work.
  Please can someone help me here.

  It's just killed me.

  It is not easy to say what may be the problem.
  Have you noticed the same thing using WIFI?

• Satellite A200-1NH-AHCI/SATA300/ChipSet and the Installation of Windows 7

  Hi all

  I have a Toshiba A200-1NH.
  Model: PSAE3E-03K01DDU.

  Because the hard drive has failed I replaced it with a new one.
  Model: WD3200BPVT.
  It is the ATA/300 and 320 GB.

  My goal is to install Windows 7. I started with the disks of origin comes with the laptop to install Vista and intended to upgrade Vista to Windows 7 later.

  Start with the original installation disc leads me to the first boot of Windows and then the system says "Windows cannot configure your computer's hardware. She's.

  I did some research and discovered that she could have something to do with the Chipset drivers.
  It is not possible to add drivers during the installation by using the original recovery disk. That's why I tried an install of Windows 7 and adding the AHCI ICH8M drivers during installation.

  Windows 7 installation cannot use the drive, any driver chipset I have add during installation, it does not change a thing.

  To revert to the original installation disc provided with the laptop, formatted the disk, absolute 0 partitions on it, restarted with disk, create partitions, copy of the data from windows and once again, the message:
  "Windows cannot configure the hardware in your computer.

  I have not tried to update the BIOS, did not and manual for it that does not use Windows Update the BIOS.
  I have not tried another disc. I connect this drive on my Mac and ran diagnostics, that's fine.
  I have not tried all the AHCI drivers, I found, there are hundeds, it is unclear which I should use.

  You guys give me advice?

  [EDIT]
  New version of BIOS found, cannot use it.
  To install Windows, I need to update the BIOS, to update the BIOS... I need Windows.

  Post edited by: Thijxx

  > Windows 7 installation cannot use the drive, any driver chipset I have add during installation, it does not change a thing.

  To my knowledge, Windows 7 already contains the SATA/AHCI driver that's why it should not be necessary to add the SATA driver during the installation of Win 7. Had driver for Win XP or Vista installation only.

  This is why I would recommend checking another HARD drive and boot from the original disc of Microsoft Win 7.

  By the way: the European Toshiba driver page provides the Intel Storage Manager (this package contains the SATA drivers) just to Win XP and Vista so my assumption should be correct that Win 7 doesn't have the SATA driver to recognize the HARD drive during the installation procedure.

• Can satellite L300-1BV - I ask Toshiba for the installation CD?

  Hello

  How could I go ask Toshiba for the installation CD? My laptop (L300-1BV) came with the pre-installed operating system, so I can ask them for the CD?
  But I don't know how I'd go to this topic.

  Any advice?

  Hello

  I think you mean the Toshiba recovery disc. Is this correct?

  If yes you can create yourself Toshiba recovery disc. So start the Toshiba recovery disc creator to create this diskette.
  This disc you create operating system preinstalled with all the drivers and tools of Toshiba. It s also called settings factory or let's say the same thing that you started the laptop time first.

  Normally, you get a recovery reminder message and I think that this information could be useful for you:
  + Important INFORMATION +.

  + your system is equipped with a hard drive recovery system. If you need repair.
  + your computer in the restaurant to original factory State, you can do it directly.
  + HDD (press F8 when you start your computer, choose "Repair your computer" +)
  + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

  + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
  + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
  + Gets severely damaged.