default DNS does not not in l2tp/ipsec
Hi all
We have Setup l2tp on asa, everything works except the default domain that is not defined. This is necessary because all the links does not provide full dns:
It's cisco config:
IP mask 255.255.255.224 local pool ClientVPNAddressPool 172.16.31.1 - 172.16.31.32
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set TRANS_ESP_3DES_SHA TRANS-ESP-3DES-MD5 ikev1
card crypto PublicTESA_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
PublicTESA_map PublicTESA crypto map interface
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of server DNS X.X.X.X Y.Y.Y.Y
Protocol-tunnel-VPN l2tp ipsec
value by default-field AAA. BBBBBBB
the address value ClientVPNAddressPool pools
It's windows ipconfig/all:
Useful PPP VPN from Cisco ASA :--> name of the connection
Sufijo DNS specific para the conexion. . :--> suffix DNS specific connections (in WHITE)
Descripción...: Cisco ASA VPN--> description
Dirección física... :--> physiqueet address
DHCP enable...: don't--> active dhcp
Automatica habilitada... config: if--> active auto config
172.16.31.1 (Preferido) IPv4 address... :--> IP address
Subred... mascara:--> netmask 255.255.255.255
Puerta of enlace... by default: 0.0.0.0--> default GW
Servidores DNS...: X.X.X.X--> dns servers
Y.Y.Y.Y
Sober NetBIOS TCP/IP...: enable--> net bios on tcp active
Thank you!
Hi Jose,
L2TP over IPsec will not be able to receive the DNS suffix.
This is a limitation of the PPP. More information:
http://cdetsweb-PRD.Cisco.com/apps/dumpcr?identifier=CSCse74376&parentprogram=QDDTS
Marcin
Tags: Cisco Security
Similar Questions
-
Problem WiFi - no internet / DNS does not work
Hello
I installed Windows 7 64-bit on my T500, and I have problems connecting to wireless networks.
Everything works fine with cable networks, but when I connect to a wireless network (any network wireless) DNS does not work.
I can ping and connect to websites using intellectual property, but he refuses to resolve domain names. I checked that the correct DNS servers are beeing used.
I installed all the drivers provided by the update of the Lenovos system + some beta drivers from http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html, but right now I'm more sure what drivers are beta and whats release.
Software & drivers installed:
The version of connections access 5.42 build 6JC725WW
11 b/g/m Realtek Wireless LAN Mini-PCI Express Adapter II (version 2007.2.1103.2009 driver)
Microsoft Virtual WiFi Miniport Adapter (version 6.1.7600.16385 driver
Anyone know what this could be?
Thank you
Trygve
I finally found a solution. Looks like there is a compatibility issue with my VPN software and wireless drivers. (even if without using VPN). To disable 'Filter light shrew soft' for wireless Internet works fine - but there again I won't be able to use VPN over wireless who is a problem for me as well.
-
Reset the default value does not
'Reset to the default value' does not work for my ListBox multicolumn, but it works for my string flags. Someone at - he never encountered this before?
I tried to remove all the elements and setting "default value to', but after another execution of the program, still not reset to nothing. I have to do it programmatically in my code, and I can't do using the server reference VI Reset at the same time. I have to define arrays of strings individually to null.
I use a large number of nodes of property in my loop of consumer to read/write the values in the front panel. Not sure if this is related.
Thank you.
This occurs because the value of a multicolumn listbox is a digital scalar or table (depending on the selection mode of the control) Express which line or the currently selected cell.
"Reset to default" only resets the values and no other properties. In this case, it is the property of ref that hosts that we consider intuitively the value of listbox mc, but it's not.
-
I have problems with my DNS does not. It happens every day.
I'm having problems recently with the DNS does not. However, it is not a constant problem. I have access to internet, and then a few hours later will have no access. It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct. Thank you...
original title: DNS is not respondingHello
1. what operating system is installed on the computer?
2. were there any changes (hardware or software) to the computer before the show?
Method 1: Perform the steps mentioned below and see if the problem persists.
a: click on the button "Start".
b. in the search box, type "invite."
c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
d. at the command prompt, type ipconfig/flushdns.Method 2: Click on the link below and see if the problem occurs.Method 3: Click on the link below and see if the problem resolves.
Hope this information helps. -
Selection of default application does not not on z3c
Hi my selection of default app does not work I upgraded my phone to 4.4 and still does not. I always use the bottom and it does not work. He always ask me the question pop out of what program I want to use.
Have you tried settings-applications-all, reset app preferences? And after that, try again to select.
-
I have problems with the server DNS does not. I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time. The Blu - Ray player froze and wouldn't connect. At first, I thought that the network has not been configured correctly, but it worked not five minutes before. I tried many things and I realized it was that my DNS server does not. Does anyone have any suggestions?
original title: DNS server does notHi Dwright,
1. have you made changes on the computer recently?
2. not the problem only occurs when you watch netflix on Blu - Ray player?Method 1
I suggest you try the steps from the following link to fix the server DNS does not problem.
a. click on start and then Control Panel.
b. go to the networking and sharing Center and then click on change adapter settings.
c. right-click on connection to the Local network and select Properties.
d. Select Internet Protocol Version 6, and then click Properties.
e. Select obtain DNS server automatically an address and press Ok.
f. Select obtain IP address automatically.
g. Repeat steps for Internet Protocol version 4 as well.Method 2
Try resetting Winsock2 from the following link:How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
http://support.Microsoft.com/kb/811259Method 3
Reset TCP\IP.
How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
http://support.Microsoft.com/kb/299357Additional information:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows -
Labour is not DNS - DNS does not but I don't know what is not correct.
Constantly having to run Network Diagnostics, but no other difficulty lies or it says THAT DNS does not work that I positive is not true because when I connect Ethernet problem disappears. My WiFi works fine too.
As a simple troubleshooting step, you can put public DNS...
-
I remain unplugged for a long period of receipt message that dns does not when you use windows 7
I remains disconnected for long delivery message that dns does not when you use windows 7, wired LAN
Concerning
NAWAB IKRAMULLAH KHAN
Hello
· When the issue started?
Method 1:
Run the Windows 7 network troubleshooting and check if it can automatically find the fault.
For more information about how to run the network troubleshooter, check this link:
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Get the network store event of Event Viewer logs.
Check out this link on the event logs of the resolution of network problems.
Method 2:
a. Click Start. Type cmd in the box start the search. Right click on cmd and select run as administrator.
b. at the command prompt, type the following command and press ENTER:
ipconfig/flushdns (there is a space between ipconfig and /)
It will show you the message successfully empty the cache of DNS resolution.
c. at the command prompt, type the following command and press ENTER:
ipconfig/registerdns (there is a space between ipconfig and /)
d. at the command prompt, type the following command and press ENTER:
ipconfig/all (there is a space between ipconfig and /)
e. the command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
f. If your connection to the Local network IP address is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer does not receive an IP address from router.
g. If this is the case, try this:
· enough ipconfig at the command prompt and press ENTER.
· ipconfig / renew in the command prompt and press ENTER.
h. test it again by typing ipconfig/all to see what is the address? (If you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)
-
View zoom "fit visible" default definition does not work because it changes during scroll even if the "fit visible" option is checked. How to solve this problem?
Hi andrik14218037,
Once you have set to "Fit Visible" it won't change the zoom, scrolling.
* Make sure that you did not press the Ctrl key while scrolling the page.
Open Acrobat Reader DC, go to the Help menu & repair the installation, make sure also that it is updated Release Notes | Adobe Acrobat, Reader.
Let me know if it solves your problem.
Kind regards
Nicos
-
Time display default slide does not apply
Hiya-
A demo of the software automatically saved to 3s by slide deck, and I would like to change the default view to 5s by blade. When I change that in Edition/Preferences/Global/Defaults, it does not apply throughout the project. No idea why?
Thank you
KimberlyWhat version, Kimberley?
If it's CP5 or 5.5: it's in the properties, general Accordion Panel. You can select all the slides that must be changed and apply both to each other.
Lilybiri
-
Linksys E2100 - reset to the default values does not
Hi, I just bought a used E2100 auction sale, when I plug it I see an 'unnamed' network with lots of bars wireless, but cannot connect because I don't know the ssid and password
Connecting cable with ipconfig, I get a 10.10.10.108 ip, the bridge is 10.10.10.99. Yet I also can't access.
I tried the reset down, button for more than one minute, pushing quickly, holding for 30 seconds, holding and the fact unplugging + reconnected the router, but nothing helped.
I also tried the CD that accompanies it with cable and wifi only, but it does not find the router. I deleted my network wireless by default settings, had my wifi on, was not connected to any network, but the CD did could not find the router.
When the router is enabled, the WIFI led flashes around once per second, while the LAN led flashes randomly as it should.
I was wondering if there is anything else I can do?
Thank you.
He has no doubt DD - WRT or some other third-party firmware on this subject and they disabled the reset button.
You can try combinations of username/password of root/admin name.
Most likely, you will need to find another router. I hope that you do too much for her at the auction. You can buy a router from linksys refurb really cheap out of the home Bank. More safe too.
Edit: E4200v1 supports the third-party firmware and is probably a better router than the E2100L. The E4200v2 does not support third-party firmware.
-
Windows Vista - default printer does not have a default
From: Freddie Kang
I have implemented several printers and have an assigned as the "default" printer network printer I noticed that this status of 'default' for this printer does not remain so after I stop and restart. It seems to default to the fax printer. I then have to reset the printer selected as 'default' to be able to print. This not happens whenever I stop - sometimes, the default printer is as default.
Someone at - it similar experiences? Solution to the problem?
Thank you.
Best regards, S.F. Kang
From: Cari (MS - MVP)
It will default to the first he concluded after opening session, so in your case, I think the connection to the network is taken longer, that so he finds the fax first.
-CARI (MS - MVP)
Technologies of Windows - Printing & Imaging
http://www.coribright.com/Windows
Another response of the community of Windows Vista discussion groups
-
Right click default program does not work
When I try to change the default program under the right click option the right window to select the program does not. But saying "this file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default program control panel. Please hep me
Hello
What type of file you are clicking right on?
and the option you select in the context menu?
-
Windows 7 continues default installation does not no driver for HD audio on a working one.
Hello
I have a problem with the realtek HD audio driver in Windows 7 Pro x 64. My audio is an integrated sound card Realtek HD (realtek alc660 6-channel codec) on motherboard, Asus k8v - vm SE. Fresh after installation of Windows 7, it installs its default HD audio driver and says, it works (in the Device Manager it says, that the device works properly), but in the list of devices in reading (in the speaker system tray icon menu) there is no peripheral, so finally there is no noise. There is no problem, given that Realtek has its own drivers for Win7 x 64 available, which work just fine (ver. 2.39 R at the moment). The problem is that, after every single boot computer, Windows installs back its own drivers by default, which as I have already said do not work. The curious part is that it does not retrieve them after reboot, but only after the turn of market.
I think the problem lies in the fact that Realtek drivers are not certified, and the MS drivers are of course. I think that Windows is to choose the latter, because it believes they are safer (workin Realtek & non certified drivers vs MS pseudo-travail & certified drivers).
Someone has suggestions how to stop the installation of defective Win7 drivers? Installation of those appropriate to each boot is not very practical.
Kind regards
DominikHello
1. the first solution didn't work, but it made me realize, that the pilot was not recovering but it was deleted and then recovered with the standard procedure (certified drivers > uncertified drivers). In addition, it was everything at random, when the driver has been deleted - sometimes it worked very well after stop and sometimes not.
2. second solution can be followed only partially. Can I uninstall the device, but I cannot uninstall the Windows driver (maybe because the system is assuming that MS is the most trusted provider). Of course, I am able to uninstall third-party drivers, but I'm not ready to delete the driver from Realtek (I tried this however).3 following the first solution that I found, that Windows still prefer certified above drivers is not certified. So I came up with an idea to remove the default window driver and disable the function of downloading drivers from Windows Update. It was quite tricky, because I found, I have (the administrator of the system without restriction) am not able to even list the driver file (c:\Windows\System32\drivers\HdAudio.sys), not to mention the actual deletion of the file. It's funny that I managed to the list by using the search function, but I was not yet able to delete, so I rebooted a LiveCD and deleted from there. I also removed copies of the folder in the places, where Windows Update downloads. After that it seems to work fine now.
4. I suggest Microsoft to release a fix or sth, that will not Windows 7 install the default driver for this particular unit, since it does not work. Or allow users to decide which drivers they prefer to use - even is not certified, because it may not be an isolated case, when a certified driver is not of works, but a certified, does not it is preferred and used. Or force the producers to certify their drivers somehow.
Kind regards
Dominik -
Unable to connect to the Internet error message, "(serveur DNS) does not". "
Original title: connection to the Internet.
I am really a novice in computer science. The wifi signal is strong and I'm connected to the internet, but I can not connect or when I do connect it falls to me as soon as it connects. Where is my problem? the only statement I received is that the computer is configured correctly, but the device or resource (DNS server) does not. Can anyone suggest what to do next?
Hello
This problem may if the router is not configured correctly or if the TCP/IP settings are incorrect.
1. What is the brand and model of the computer?
2. when, exactly, you get this error message?
I suggest you try the procedure described in the article and see if it helps.
Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7
http://support.Microsoft.com/kb/2779064/en-usHope this information helps. Answer the post with an up-to-date issue report to help you further.
Maybe you are looking for
-
Hello, I have a Macbook Pro mid 2012. About 2 years, I've updated the hard drive for an SSD crucial. A few days earlier, I tried to boot my macbook, and he gave a flashing folder with a question mark symbol which I understand means the disc is not re
-
When I write an email from an address the answer goes to another one of my email addresses
If I write that an email from [email protected] to answer x. x is found in my mailbox [email protected]. I want to email written to the [email protected] to receive my answers to [email protected]
-
We have all seen. Flipping through the pictures of old album by and there it is: a picture taken before his departure for a dance or a day at the beach who has gone and changed the colors. Permanence is something we should want their pictures and im
-
Pulse frequency of CO generates actually 1 pulse per second?
Hi all I have a VI installed outside in the attachment below. I seem to have a lack of understanding on how to program this VI here. I do not understand what might not. The VI is very basic. The frequency has been set to 1, and the units are Hertz
-
Extended screen - scrolling up and down between them
On an Acer V17 Nutro, is it possible to put the scrolling with the mouse up and down between the screen extended instead of the left and the right?