Default settings of the Disco Plus the query governor

Similar Questions

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Mac Mavericks. Camera raw 9.1. Camera Nikon D810. How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply also in the pictures showe

  Oops... did not write the question where I... How to set the default settings of the camera profile standard (now available after downloading the camera profile and copy it into the appropriate file)? Is it possible to apply too in images showed in the bridge? I'm a newbie in the forums and I'm not sure how to proceed.

  You can right click and copy the settings on an image that has the right profile. Then highlight all the images that you want to edit, right click and paste the settings. On the list that is displayed, simply choose the camera calibration.

• confusion on the default settings of the territory.

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.
  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for databases and application of defined character.

  Hello

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.

  Profile for the language and territory options are configured at the site level, when you run a quick installation. The language that you choose as the base language is used for the linguistic profile. The default settings for the date and number formats are from the territory profile setting. So, if you want to use the territory of Saudi Arabia, select here. Otherwise, keep it as it is (I would say you keep the default value and change later).

  In version 12, quick installation installs only American English. If you plan to use languages other than US English in your installation, read the information in the Oracle Applications NLS Release Notes and all the necessary measures for the installation of the translated software.

  Installation Guide for Oracle Applications: Quick help install - Page 5-6, put in place the national language Support (NLS)
  http://download.Oracle.com/docs/CD/B40089_09/current/Acrobat/120oaig.PDF

  Note: 550206.1 - Oracle Applications NLS Release Notes, version 12.0.4
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550206.1

  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for characters of database & application defined.

  UTF8 support Arabic characters, it should be OK to select the UTF8 character set.

  Note: 393861.1 - Guide of globalization for Oracle Applications version 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=393861.1

  Kind regards
  Hussein

• I restored Firefox to its default settings, but the slowness, crashing and nonresponse are not resolved

  Hello colleagues-Firefox users.

  I followed the Commission indicated in the Support article on the slow, crash, etc. by restoring Firefox to its default settings. But the problems go away. The remains of the slow browser and still gives me error messages on a non-compliant script or plugin and crashes. To make matters worse I don't see the menu on the top tool bar items, I was so used to using, such as file, editing, display, etc.. I very often used the display menu to zoom on texts that are too small for me to read. Now I can not do. I tried to drag icons in the menu on the upper right of the page on the top tool bar above the address bar, but it is not the same thing as what I used to use before, and there is no File, Edit, View, tools in the menu icons. So now I see my g-mail Inbox in tiny little characters. I tried to use the Magnifier suggested in the troubleshooting of support page, but it's too heavy so I gave up.

  Would someone kindly please help me with these questions? Thank you much in advance.

  Kind regards
  Tom Graciano (globmart)

  If the zoom is your problem so just try to use the keyboard.
  Hold down the control (Ctrl) key + "+" to zoom in any window.
  Otherwise if the crash occurs suddenly so just try to uninstall and reinstall Firefox with the update. You brought a lot of changes manually, it might create problem. So reinstall once and check whether it is at your service.

• How to change default settings of the browser to the installer?

  I want to roll Firefox like standard software to the company that I administer, but we have a lot of things that runs on IE plugins, IE it must therefore remain the default browser, and users simply press 'Yes' when Firefox is opened the first time and then complain when they can't open the internal links. Is there a way to turn it off to ask if there is a default browser? The cck Wizard, I checked, but it did not offer this possibility. Is there a registry key or file where I could change this option before opening?

  Hello Leskat, please see the following article on how to implement a lock for settings file: http://kb.mozillazine.org/Locking_preferences

  put the following line in the mozilla.cfg file to disable the application of the default browser:

  lockPref("browser.shell.checkDefaultBrowser", false);
  

• Reset the default settings of the desktop folder

  I wanted to change the location of my personal (user) of the C: drive to another. By mistake, I gave the location of the desktop as D:\ folder. The result was not to my liking (instead of the desktop folder, I saw the folder on the drive (same icon and the bar blue % used).) I tried to change the settings in the registry, which was advised by another site. They told me to make the following changes:

  "

  To do this, go to start > run, type "regedit" and get the keys listed below. You can create a string value extensible "Desktop" in the "User Shell Folders" key, if this value does not exist.

  Now, double-click the name of the "Desktop" under "Shell Folders" and "User Shell Folders" respectively, to set a new path in their fields in the value data for your 'Office' folder

  Registry entries:

  • 1 registry entry:
    [HKEY_CURRENT_USER dossiers\]
    Key type: the current user
    Value name: Desktop
    Data type: REG_SZ (String Value)
    Value Enabled:
    Disabled value:
    Another value: set the new path to the desktop folder.
  • 2 registry entry:
    [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\]
    Key type: the current user
    Value name: Desktop
    Data type: REG_EXPAND_SZ (expandable string value)
    Value Enabled:
    Disabled value:
    Another value: set the new path to the desktop folder.

  "

  I did, and she is back to normal. However, the desktop in the user directory folder is hidden , even if I put the path by default (the check box for the hidden option is grayed out). Also, the default icon for the Office changed default folder icon.

  I want the desktop folder as it is. How can I do this?

  Note: This was done in the administrator account.

  I solved the problem of "hidden folder" by changing the attributes of the desktop folder. He was set to RHSD, I changed it to RD, remove hidden and system attributes, by using the command "attrib".

  However, there is NO "desktop.ini" file in the desktop folder, or it is hidden so that I can't see it in the 7-Zip file manager. Does that create a problem? How can I do this? As far as I know, is that it is [.] ShellClassInfo] wrote the top of the page and there are two other elements, namely LocalizedResourceName and IconResource. What should I write in these two?

  Do help.

• How to set default settings for the DJ D1660 printer in OS Lion

  I need set the defaults on my DJ D1660 on iMac with Os Lion, so that others do not print in color accidentally - I want to like the default to be gray, fast printing. I put the defaults in CUPs, but they do not appear in the default settings specified in the printer dialog boxes, which is always color and normal printing. After 45 minutes talk to Apple, today they concluded that default values should be laid down in HP software, but the software does not give you anywhere the abilty to set the default values!

  I was able to define the default behavior of printers in each printer and computer I've owned or worked on the past 25 years - this is a trivial question in Windows for example - but am confused by HP and Apple. There must be a way!

  Help, please.

  OK, it worked in 10.5 and earlier versions, but I have not tried 10.6 or 10.7:

  -Printing something with the printing mode that you want to lock

  -Go to ~/Users/yourusername/Library/preferences.

  -Choose the com.apple.print.custompresets.forprinter. [yourprinter] .plist

  -Press command - I

  -On the window that appears, check the box next to "Locked" lock file

  -Close all windows and test

• Switch Cisco 2960/3560 = > recovery password and default settings with the button Mode

  Hi Experts,

  I have some confusion with the button Mode with cisco 2960/3560 switches.

  I read on many forums and articles, but where things are not clear.

  a place given 3 seconds and somewhere is given 7 or 10 seconds.

  Qus1), what is the exact time to press/hold Mode button to perform two following tasks:

  A. password recovery (according to my knowledge 3 sec) good or bad?

  Configuration of the switch (start + run) would be safe

  After the recovery of password? Yes or no

  B. factory default (according to my knowledge 10 dry) good or bad?

  I'm afraid, because if I press mode button more than 3 seconds, then

  It will delete any configuration of cisco switch. Yes or no

  Qus2) I want to recover the catalyst 2960/3560 switch password without

  Start/run configuration to lose. That is my main concern.

  Please tell me how to do this, what will be the time keeping Mode buttom

  in a few seconds?

  Qus3) which means this line

  "If the password recovery mechanism is disabled in switch

  then you will lose all the config.

  This sentence has been given on this forum url

  https://supportforums.Cisco.com/thread/140848

  KS

  Attach a terminal or PC with terminal emulation (for example, Hyper Terminal) port console switch.

  Use the following terminal settings:

  • Bits per second (baud): 9600

  • Data bits: 8

  • Parity: None

  • Stop bits: 1

  • Flow control: Xon/Xoff

  Note: For more information on the wiring and connection of a terminal to the console port, refer to connecting a Terminal to the Console Port of Catalyst switches.

  Unplug the power cable.

  The power switch and take it to the switch: command prompt:

  2900XL, 3500XL, 2940, 2950, 2960, 2970, 3550, 3560, and 3750 switches of the series, to do this:

  Press and hold the mode button located on the left side of the façade, while you reconnect the power cable from the switch.

  2960, 2970

  Release the Mode button when the SYSTEM LED flashes orange and then turns green. When you release the Mode button, the SYSTEM LED flashes green.

  3560, 3750

  Release the Mode button after about 15 seconds when the SYSTEM LED turns green. When you release the Mode button, the SYSTEM LED flashes green.

  The system was interrupted before the flash at the end file system initialization

  loading the operating system software:

  flash_init

  load_helper

  boot

  switch:

  Run the flash_init command.

  switch: flash_init Initializing Flash... flashfs[0]: 143 files, 4 directories flashfs[0]: 0 orphaned files, 0 orphaned directories flashfs[0]: Total bytes: 3612672 flashfs[0]: Bytes used: 2729472 flashfs[0]: Bytes available: 883200 flashfs[0]: flashfs fsck took 86 seconds ....done Initializing Flash. Boot Sector Filesystem (bs:) installed, fsid: 3 Parameter Block Filesystem (pb:) installed, fsid: 4 switch: !--- This output is from a 2900XL switch. Output from !--- other switches will vary slightly.

  Run the load_helper command.

  switch: load_helper switch:

  Question the dir flash: command.

  Note: Be sure to type a colon ":" after the dir flash.

  Appears in the file system of the switch:

  switch: dir flash: Directory of flash:/ 2    -rwx  1803357                  c3500xl-c3h2s-mz.120-5.WC7.bin !--- This is the current version of software. 4    -rwx  1131                     config.text !--- This is the configuration file. 5    -rwx  109                      info 6    -rwx  389                      env_vars 7    drwx  640                      html 18   -rwx  109                      info.ver 403968 bytes available (3208704 bytes used) switch: !--- This output is from a 3500XL switch. Output from !--- other switches will vary slightly.

  Type rename flash: flash: config.old config.text to rename the configuration file.

  switch: rename flash:config.text flash:config.old switch: !--- The config.text file contains the password !--- definition.

  Issue the boot command to boot the system.

  switch: boot Loading "flash:c3500xl-c3h2s-mz.120-5.WC7.bin"...############################### ################################################################################ ###################################################################### File "flash:c3500xl-c3h2s-mz.120-5.WC7.bin" uncompressed and installed, entry po int: 0x3000 executing... !--- Output suppressed. !--- This output is from a 3500XL switch. Output from other switches !--- will vary slightly.

  Enter "n" at the prompt to abort the initial configuration dialog box.

  --- System Configuration Dialog --- At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Continue with configuration dialog? [yes/no]: n !--- Type "n" for no. Press RETURN to get started. !--- Press Return or Enter. Switch> !--- The Switch> prompt is displayed.

  At the switch prompt, type en to enter a mode.

  Switch>en Switch#

  Password recovery

  Type rename flash: config.old flash: config.text to rename the configuration file with its original name.

  Switch#rename flash:config.old flash:config.text Destination filename [config.text] !--- Press Return or Enter. Switch#

  Copy the configuration file in the memory.

  Switch#copy flash:config.text system:running-config Destination filename [running-config]? !--- Press Return or Enter. 1131 bytes copied in 0.760 secs Sw1#

  The configuration file is now reloaded.

  Replace the current passwords that you do not know. Choose a password with at least one capital letter, one number and one special character.

  Note: Replace passwords that are required. You must crush not all passwords listed.

  Sw1# conf t !--- To overwrite existing secret password Sw1(config)#enable secret !--- To overwrite existing enable password Sw1(config)#enable password !--- To overwrite existing vty password Sw1(config)#line vty 0 15 Sw1(config-line)#password Sw1(config-line)#login !--- To overwrite existing console password Sw1(config-line)#line con 0 Sw1(config-line)#password 

  Write the running configuration in the configuration file with the write memory command.

  Sw1#write memory Building configuration... [OK] Sw1#

  For factory reset:

  do not give under the control of factory reset

  Switch#copy flash:config.text system:running-config

  can I copy the running configuration to Flash

  Switch flash running-config #copy:

  Destination file name [running-config]?

  Building configuration...

  [OK]

  Switch #copy running-config startup-config

  Name of destination file [startup-config]?

  Building configuration...

  [OK]

  Review the link for more information below

  http://www.Cisco.com/en/us/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

  Please note the useful messages.

  Concerning
  Vesta
  "Everybody is genius." But if you judge a fish by its ability to climb on a tree, he will live his entire life, believing that this is stupid. "

• Can someone tell me the default settings for the internal speakers (Realtek HD Audio Manager) on HP G62 454TU laptop pls?

  I had problems with IE11 and Outlook, both kept gel (not answer) more and more each day.  Outlook is still difficult sign in, I have to sign at least two times and once I got to sign on 7 times.  The drafting of emails, I'd get msg "cannot connect to Outlook - try again later. IE11 is also unstable permanently "unresponsive" my sound stopped working also and I found that he lacked Realtek HD Audio Manager.  It took nearly a week trying to figure out how to reinstall.  (I am 60 years old and not informed techno) Finally, I downloaded and installed (with no help from HP) but speakers still does not.  I approached then Microsoft Help Desk who suggested that reset IE11.  I did it yesterday and now all seems ok with IE11 and Outlook but I have still no sound.   Where to find the default settings for programs that use audio ie itunes, youtube, etc?

  I have only a couple of theories left to isolate the problem, but have no idea how to go on this issue.

  1. I received a msg when I lit the notebook from HP saying storage battery was low and the battery can be replaced.  I've never used this notebook on sector so I ignored msg but with freezes and random low cut that I removed the battery which seems to solve that problem, but I wonder if firm random downs could have damaged files, software or anything.

  2. Windows updates put things here that seem to be more for Windows 8 for example. Touch screen program.   Can we update caused problems for the sound on my laptop?

  I have run virus/malware programs with no threat found.  I also installed Glary to find and fix registry problems, but still no sound.

  Can someone help me please?

  Hello

  I'm sorry for the delay in response and for the inconvenience this problem did you. According to the description of the problem, you can't access your account and receive the error message "unable to connect to Outlook - try again later.

  I suggest you check the service state on https://status.live.com

  Note: you must identify yourself on the site to find out the exact state of the server, your account may be placed on

  I also suggest you to optimize your browser and check if it helps.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• Load default settings from the BES server application

  Hello

  Is there a way for the BES to say my request that the default settings to use? Now, after loading my application a few textbox fields to be filled in before anything else happens, and I want load the default settings/text of the BES on blackberry. Each BES that will use the application will have different values by default, so hard-code in the application is not an option.

  I hope that this is possible before the BES can publish/push demand for blackberries.

  So far, I looked in the COMPUTER strategies, but have not found what I'm looking for (maybe I'm looking in the wrong place).

  Thanks in advance

  You can put custom elements to your TI-policy, aski your admin bes on the details.
  The ITPolicy class allows easy access to these elements with Integer, String, Boolean, Byte, and Bytearray being supported.
  I have successfully used this mechanism on a couple of apps.

• Can I change the default settings for the latency time Serial Windows with LabVIEW

  I have a wireless data collection device that my business is that I am using for the test one of our other wireless products. The device sends data series to a PC via a USB port. I wrote an automated LabVIEW program to test all the functions of my new product. However, after firing in the data, I realized that the serial data coming very fast and requires me to change latency of Windows by default for the port COM 16ms 2ms Miss not nothing. It's pretty easy for me to do locally on my machine, but much more difficult for me to spec for an off-site CM.

  Is it possible to have my LabVIEW program change the latency time of the COM Windows port of 16 ms to 2 ms automatically?

  Are you talking about the FTDI driver? I know that they allow these changes through registry settings. Thus the approach would probably be to have a small registry script that updates the parameter of function. Most likely, this will have to be run with elevated privileges, as these parameters resident generally in the HKLM or HKCR rather than the HKCU one hive.

• OfficeJet 5740: change the default settings of the printer

  The default printer for vs. black & white color is set to default color. Almost all my printing needs in black & white. If the default setting can be black and white? If so, how?

  Marcelus

  Excellent response. I had to go in the back door of printers & devices because settings printers & devices can only set as default or remove devices. typing "printer" in the search of this screen window took me to the printers & peripherals where preferences can be set.

  Thanks - Ahhh the bath of right not so before learning new software.

  -Alan