Load default settings from the BES server application

Similar Questions

• Default settings from the create a virtual computer Wizard

  I still want to see the addition of models to use with the creation of a new virtual machine. Size of the disk and the type of network, etc. If nothing else I would be grateful to have the opportunity to set the checkboxes and radio buttons to the way I ALWAYS create a new machine. I don't use NAT for the network. Never use 2 GB pieces etc.

  Feature request is open. Thank you.

• Failed to load existing records from the database on SD card during initialization of the application

  When the Simulator is launched upward, not able to load existing records from the database in the Inbox, so no records appear in the Inbox even though they exist in the database. It seems to be a problem with the SD card in the Simulator - the file system for the SD card is not correctly initialized when the application starts first to the top. During initialization of the application tries to access the SD card by using the following code.

  Boolean

  sdCardPresent = false;

  Enumeration e = FileSystemRegistry.listRoots ();

  If

  (e! = null) { }

  While (e.hasMoreElements ()) {}

  root = (String) e.nextElement ();

  If

  (root.equalsIgnoreCase("SDCard/")) {

  sdCardPresent =

  true;

  }

  }

  }

  sdCardPresent is always set to false and was not able to access existing records from the database. Once the application is initialized and try to create the database, the database is created successfully on the SD card.  The code is the same as above when creating the database and was able to do sdCardPresent = true.

  Is there anyway to register or add the SD card during initialization of the application or any property as System.setProperty overide the path of the default directory value?

  I use BlackBerry 9550 Simulator. I checked the "file system using PC for files from the SD card" and I use "C:\bb\SDCard" for the file system of thr.

  Also tested on the BlackBerry and found the same thing, if the device is hard reset, then it not reading the SD card as well.

  Mark the thread as solved then.

• Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

  The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

  Anyone has an idea why I get this error?
  Walt

  Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

  Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

  From another forum, although it applies to a different application, same principle:

  1. open Regedit.
  2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
  Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
  3. right-click on it and select authorization.
  4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
  5. apply a full control.
  6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
  Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
  7 right-click on it and select authorization.
  8. click on Advance and change the owner to administrators.
  9. click on the box that will appear below the line owner.
  10. click on apply and grant full control to the administrators.
  11. close all tabs and navigate to the administration tool.
  12. open component services.
  13. click on the computer, click my computer, and then click DCOM.
  14 find the corresponding service that appears on the display of the error.
  15. right-click on it, and then click Properties.
  16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
  17. check enable local.

  Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

  CLSID:
  
  {D63B10C5-BB46-4990-A94F-E40B9D520160}

  and APPID

  {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

• confusion on the default settings of the territory.

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.
  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for databases and application of defined character.

  Hello

  During the installation of R12.0.4 should I do to select Saudi default of Arabiaas. I do the installation in Saudi Arabia with the Arab patch NLS.

  Profile for the language and territory options are configured at the site level, when you run a quick installation. The language that you choose as the base language is used for the linguistic profile. The default settings for the date and number formats are from the territory profile setting. So, if you want to use the territory of Saudi Arabia, select here. Otherwise, keep it as it is (I would say you keep the default value and change later).

  In version 12, quick installation installs only American English. If you plan to use languages other than US English in your installation, read the information in the Oracle Applications NLS Release Notes and all the necessary measures for the installation of the translated software.

  Installation Guide for Oracle Applications: Quick help install - Page 5-6, put in place the national language Support (NLS)
  http://download.Oracle.com/docs/CD/B40089_09/current/Acrobat/120oaig.PDF

  Note: 550206.1 - Oracle Applications NLS Release Notes, version 12.0.4
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550206.1

  a characterset more thing if I select UTF8 it supports AR8MSWIN1256, otherwise I selects AR8MSWIN1256 for characters of database & application defined.

  UTF8 support Arabic characters, it should be OK to select the UTF8 character set.

  Note: 393861.1 - Guide of globalization for Oracle Applications version 12
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=393861.1

  Kind regards
  Hussein

• NB200-h-13 - no response from the DNS server and gateway

  Hello

  I have netbook NB200-h-13 with XP SP3. Its impossible to connect to wireless internet and the error messages are
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DNS SERVER
  HE DIDN'T THERE WAS NO RESPONSE FROM THE DEFAULT GATEWAY

  The connection with the ethernet cable is ok with the adpter reltek that also adpter atheros ar9285 WiFi is activation, working properly and the modem router signal is strong.

  Hi abk55,

  What program you receive this error message?
  Have you tried another browser, for example Firefox or Opera?

  I guess it has something to do with your wireless network card or WLAN parameters if the LAN cable is working properly. So you should try to update the WLAN driver on the Toshiba site.
  Also, try to disable the filtering of MAC addresses and use another encryption.

• Client DHCP is unable to get a valid IP address from the DHCP server.

  Client DHCP is unable to get a valid IP address from the DHCP server. I have a home edition of Windows XP attempts to connect to my router wirelessly with wireless or wired connection but I get an error in Event Viewer with the discription DHCP 1007 error message. From what I researched, I discovered that the DHCP service depends on the AFD, TCP/IP and NetBT services. All these services are correctly place and worked very well (even the DHCP service is running without error) but every time I try to release/renew my IP address I receive than DHCP warning in the case where the viewer and I just cannot get a valid IP address of the server (router) I also have one of these verizon wireless G3 usb adapters and it works fine. I also have a good ping back when I try to do a ping localhost (for the closure) I also tried the preinstallation of uninstalled drivers from the adapter/s and nothing works. The only entrees in the registry for DHCP error are also AFD, NetBT and TCP/IP nothing else there, also all the files in the/system32/drivers afd.sys netbt.sys and tcpip.sys in addition to solve the problem, I'll mention that I installed and reinstalled Northon earlier, I do not remember if the problem appears before or after that. I receive also any error or warning in the security log or at least I don't know how to read: P

  Thanks in advance

  Thanks for the information.

  I hope you know that it is risky to connect the laptop to the Internet with no firewall and no antivirus... If this laptop is already connected to the Internet in this State, he is perhaps already infected.

  You said you know the router works because the other computers can connect successfully to it.  You should check the configuration of the router to make sure that it is not configured to limit the number of IP address it supplies, and (b) it is not configured to filter users by MAC address.

  When this laptop is connected by Ethernet, even if he gets the IP address of 169.254.x.y, can you ping the router?  Find the IP address of the router on any computer connected to it by running the ipconfig command in a command prompt window.  The "default gateway" is the IP address of the router.  Run the ping command in the command prompt window as well.

  If the ping is successful, it is possible that you might be able to use an IP address in the correct range for an Ethernet cable (but I doubt that it works for the wireless).

  It is very difficult to cite anything in this forum.  If you click on the link "Reply citing", all of the message to which you are replying is quoted.  You can copy the citation and delete parts of it, but it is not very user friendly.

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  When I open Illustrator I get an error: "the preferences file is corrupt and has been reset to the default settings. "The corrupt file is saved as: Adobe Illustrator Prefs.err.

  Hello

  We have released an WINDOWS ONLY fix today that solves this problem of corrupted preferences. Go to the creative cloud application and download the patch CC 20151.1 (19.1.1)

  If you see not the patch in the creative Cloud application wait on or refresh cycle you can disconnect and connect to force refresh the list of available patches.

  Kind regards

  Ashutosh

  On behalf of the Illustrator engineering team

• Unable to connect to the console BAM from the second server

  Hello
  
  I have 11.1.1.3.3 BAM, running with 2 managed servers (cluster). I created a user on the WLS console with the DefaultAuthenticator method.
  
  I associated the grid of BAM control this user as architect of the report.
  
  I can connect to OracleBAM applications on a server, but from the second server I get the error:
  
  BAM-00223: service oracle.bam.adc.common.core.IDataStore
  What it could be?
  
  TX

  You have configured the BAM cluster in active-passive mode. Given that the BAM server has not supported active active configuration.

  Looking at the error, it seems that the BAM Server attempts to start on the other node. Please follow the SOA HA to set up passive active BAM documentation.

  THX
  Ritesh

• How to move all e-mails from the imap server to local folders automatically for each mail?

  Hello

  I want to transfer all my e-mails in local folders as soon as they arrive in Thunderbird and remove them from the server. I can do this manually by moving the mails to hand, but I want to do it automatically by Thunderbird.

  After a few hours, I found there is an option on the removal of e-mails from the mail server, if I use POP3, but it is not an option for IMAP.

  Important note: my mail can not be resolved like POP3, so please don't segguest implementation using POP3.

  Thanks in advance.

  http://KB.mozillazine.org/Filters_%28Thunderbird%29

• Safari now load of items from the new york times or IRS Web site

  Safari now load of items from the new york times or IRS Web site

  I tried to change the notifications including to get rid of all the

  I encouraged webgl and plug-ins

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site

  Quit and then relaunch Safari a try these Web sites.

• OfficeJet 6700: change the default settings of the printer

  I want to change 'Gray levels' to 'Off' to 'Black ink only' and 'Output quality' to 'Normal' to 'project '. I went to the Panel of control permanently change my default settings of the printer, but whenever I try to print, the parameters began to 'Off' and 'Normal '.

  Hey @arican55,

  I see you have some problems with the definition of default values on your PC of Windows 10 when printing to your Officejet 6700 Premium e-all-in-one printer. I can help you with that.

  To clear all default settings:

  1. If the printer is connected via USB cable to your PC, delete.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on any icon of your printer listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons of your printer listed.
  6. If you removed the USB cable, connect. If this is not the case, click on add printer and follow the prompts to add a print to your printer queue.

  Please let me know the results after following the above. If you can set the default values, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I use windows mail and put so once I go to windows mail notes are deleted from the Yahoo Server. Now, all of a sudden, they go in the trash of Yahoo instead of disappering

  Windows with Yahoo mail.

  
  
  I use windows mail and put so once I go to windows mail notes are deleted from the Yahoo Server. Now all of a sudden, they go in the trash of Yahoo instead of disappering. I use Yahoo mail for junk and spam of the screen, empty the trash from Yahoo, then open the remaining notes with Windows Mail after the release of Yahoo. This has just begun.

  It is not clear if you use a POP3 server or an IMAP account - it sounds as if it were an IMAP.  I don't know how messages get tossed into the trash from Yahoo rather than be removed.  You could try to remove the account, closing and reopening of Winmail opener and then adding the new account.  This resolve sometimes strange questions.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

  Steve

• Driver HP LaserJet P1006 downloads missing from the HP Server

  I went on the following link to navigate to the drivers for my OS (Vista 64):

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=3435684

  It linked me to this file:

  FTP://ftp.HP.com/pub/softlib/software12/COL21058/bi-55362-6/ljP1000_P1500-HB-PNP-Win64-en.exe

  However, this file, bi-55362-6/ljP1000_P1500-HB-pnp-win64-en.exe, is absent from the HP Server. Is the official download available anywhere else on HP site? HP can reupload this file maybe?

  Try to use FileZilla to download the file.