Defective power adapter?

Similar Questions

• My Satellite goes into battery mode despite being connected to the power adapter

  Y at - there anyone out there who can help me, please!

  I bought a Satellite a couple of years ago which worked well for a while - however, it has started to overheat a lot and kept stop without reason. After many searches on the net, I discovered that the fans were very likely blocked with dust? After you clean the laptop worked like a dream and as a Bunny happy I was!

  However, now a new problem has been its ugly reappearance - for some weird reason the laptop suddenly, without warning, past in dominant mode of battery despite being connected to the power adapter? He refuses to "acknowledge" that the adapter is plugged drains the battery quickly and then stops?

  I tried once more looking for an answer and it seems that I am not alone in suffering from this problem? I read that it is perhaps a bad connection between the adapter and the motherboard, but it would be expensive to fix? Others have said to try a new adapter, but I tried from another laptop and it still happens? I hesitate to implement local repair because sometimes, this problem may occur after half an hour and other times, that won't happen for hours and hours and it is difficult to explain the problem?

  There seems to be no rhyme or reason, but to crazy me on a regular basis!

  HI Deb,

  It is a common problem and can have several causes. The most common are a common defective soldering on the motherboard (where the socket is attached) and it can also be caused by a bad connection between the AC plug (at the end of the cable) and the socket on the laptop.

  Unfortunately, the standard response from most repairers is just to replace the motherboard, probably because it's faster for them and produced more revenue that comes to fix the connection.

  I solved this problem on my SA30 by pinching the cable ca to the back of my laptop in order to prevent any movement or tension on the connector. Unfortunately this will not help if the socket is already damaged, but it can reduce the incidence of the problem to occur.

  Kind regards

• Hello, I receive a message telling me that my AC power adapter type cannot be accepted.

  A few days ago, I started having a power warning message when I turn on my laptop. It is said that the AC power adapter type cannot be determined. Beacause it my battery will not charge. But it's the power adapter that came with it and I have used for so long that I got the machine. Do not know what is happening.

  I guess that the laptop works on AC power only but always?

  If you remove the battery from the laptop work?   If yes then I suspect the battery does not have rather than the power adapter.
  If it will not work without the battery then I would suspect that the adapter is faulty/defective.
  Don't let not the battery-even if it is the problem.

• Check whether or not the magsafe power adapter is authentic

  Hello! I bought some 60 W MagSafe 2 Power adapter MD565CH/A, 85 W MagSafe 2 Power adapter MD506CH/A & 45 W MagSafe 2 Power adapter MD592CH/A but the serial number in each category is same for example there are 10 units for 60 W & all have the same serial number. I have a doubt, be they authentic shape Apple or not. Kindly help.

  You will need to call Apple for confirmation.

• A Magsafe 85w power adapter would be detrimental to my MacBook Pro (13-inch, mid 2010)

  Hi all!

  I have a MacBook Pro (13-inch, mid 2010, 2.66 GHz Intel Core 2 Duo).

  Well, after years of abuse, the thinner rope (which connects to the Macbook) began to tear. I tried to drag an above shrink wrap to fix and make it last a little longer, but now I find myself stirring the rope around so he can start loading.

  in any case, I found a company after-market on Amazon called Supsun making (link below) and recently purchased a. He said that going to work with my Macbook, but I think not even check what power mine use and after he woke up, I found out mine originally a 60w.

  Will this hurt Magsafe Supsun 85w power adapter my mid 2010 13-inch Macbook in anyway?

  I thank you for all your comments!

  Link to Supsun adapter that I bought on Amazon:

  F8 & PSC = 1 https://www.Amazon.com/GP/product/B01IP3YNA6/ref=oh_aui_detailpage_o00_s00?IE=UT

  I, personally, look at the price difference and ask myself I'd be sad if I saved money and things did not work well.

  Review, carefully, then users of the product review.

• Does someone have a MagSafe 2 power adapter whose serial number is located inside the space where the two pins?

  Hi guys!

  I want to know if the power adapter of MagSafe2 that I just bought is genuine or counterfeit.

  I bought a MagSafe2 power adapter that has its serial number located inside the space where the two pins. Its model # is A1424. All the power MagSafe adapters I've seen always have serial number located under the round metal head big (I guess it's called head male or female?). Please see photo for reference.

  If any of you have or had any Apple Store, can you let me know?

  Thank you!

  

  My 85 Magsafe is exactly identical to your image.   It was 'inside the box' with a new MBP computer.

• Power adapter can be used for a Satellite Pro M70

  power adapter can be used for a laptop Toshiba DC?

  Details:
  19V, 3, 42

  Thank you
  Arun

  Laptop Toshiba computers use a 19 V or 15 V adapter.
  You must first check the specifications of your laptop before connecting an AC adapter.
  But I would always use AC adapter provided with the laptop or an original part recommended by Toshiba

• PC Toshiba laptop 1110-Z14 - power adapter *.

  Hello

  I am from the United Kingdom (Europe). I have Toshiba satellite 1110-z14 laptop and I need a power adapter for it. Is someone can you please tell me what model number of PSU do I need?

  appriciate any help.

  Hello!

  My Satellite 1110-Z14 a sequel AC adapter / CC:

  PA3097E - adapter universal 100-240V AC, 50-60 Hz, 60W with 19V DC output.

  Good day!

• NVIDIA Quadro: I plug 6-pin power adapter or connector 8 pin?

  I am trying to install my graphics card Nvidia Quadro 6000 on a HP Z820 with a PSU 1125W

  The Quadro card: 1x8pin auxiliary power connector and power connector auxiliary 1x6pin.

  My questions are

  1. in the connection of my power adapter, do I plug the unit into the 8 pin or 6 PIN auxiliary connector?

  2. where can I connect the other end of the power adapter?

  3. the power adapter must be a HP one or can I use any brand.

  4, if it's HP, what is the part number

  I would appreciate help on this.

  Vinny

  Edit: Here is this link related to this issue.  It goes also to other topics with excellent similar information:

  http://www.TomsHardware.com/reviews/power-supply-specifications-ATX-reference, 3061 - 12.html

  First, it is important to know that there is another interface "6 to 8 pins" which is a feature of power-for - motherboard power ... you don't want that, sure, and connectors plastic is having different shapes.  You can see that he has 4 yellow wires (usually the supply wires) and would not have the sequence of correct wiring of a PCIe 6 to 8 pins supplementary power converter:

  

  I don't know the show, too, is not what you want.  This looks like an 8 pin to two adapter 6 pins.  You want a 6-pin to 8 pin adapter.  Is attached another picture of the nVidia type tells you to do.  If you look at the hyperlink at the top of this post you will find the wiring of 6 pins on 8 wire and for your project, you will probably want to follow the advice of nVidia for best results.  There is power to the ground and 'sense' son to all be correctly connected to the adapter.

  There is also some PCIe additional adapters that allow you to convert several sheets supply 4 son "molex" grouping in a single 6-pin PCIe or connector 8.  It is best to not do this if you have a power with official ones built in.  Your the fact, and to check the manual, it looks like your top rated power supply has 3 of these auxiliary PCIe power cords (G1, G2 and G3 will be printed on the side of the end of your 3 card).  On the other hand, offer reduced rated power of the Z820 has only 2 additional PCIe (auxiliary) cords supplied by it.

  I don't know if you are forced to use a good 6-8 converter or could if away with plug 6 pin right in the correct position on the plug 8 pins of your videocard directly, according to article of the hyperlink.  I, personally, would get an adapter.

  EDIT: Here is a picture of two ends of what is supposed to be a PCIe 6-pin supplementary power adapter PCIe 8 pins.  The first and third power pins 6 pins are officially DC 12v (some references have each of the first 3 pins being 12vDC) and subsequently, the rest are supposed to be a 'sense' or earthed.  When I look at the plug 8-pole end wiring I do not see a ground wire or ground jumper coming to pin 8.  I would not recommend it, unless I'm wrong about his son:

  

• iPad Pro 9.7 "USB - wattage power adapter?

  I'm surprised that the iPad Pro 9.7 "that I just upgraded to a (1st gen) iPad Air only has a 10W compared to Air 12W power adapter.

  All confirm that their unit has the same card please?

  I can't confirm it directly since I don't own one, but for what it's worth, one a few days ago I saw a similar post on CSA the asking on the charger 10W on their Pro 9.7. And this could confirm:

  http://forums.MacRumors.com/threads/iPad-Pro-9-7-charger.1965066/

• PROTECTED Z930 Power adapter, flashing

  The power adapter light flashes in orange and I can't turn on my laptop. It seems to blink 7 times and then 1 time before a long pause. Any ideas on how to get the laptop on again?

  Your laptop has a hardware failure, and it sends the hex code. This code can be read by technicians and they will know what is the problem.
  I can't say for sure, but I guess that there must be a problem with electronic control gear.

  The warranty is still valid?

• Re: Tecra A11 - 11Z goes on with power adapter only

  Hello

  My Nooteboom only lights up when I connect the power adapter, 30 seconds to turn off, do not see anything on the screen! Tahnk you

  To be honest I did not understand very well your ad.
  Can you please tell us what exactly happens when you press the power button / stop?

  What was your last action before you noticed this problem?
  Have you updated BIOS or maye some hardware component?

• Satellite C870 - 11G - AC power adapter compatibility question

  I have a C870 - 11G.

  It uses power adapter part no PA3917U-1ACA, who recently became damaged when someone tripping over the cable and it bends the end that connects to the laptop.

  I used to have a Toshiba C660D-10W a few years ago and the power for this laptop adapter you still, even part no PA3714E-1AC3,.

  Does anyone know if this is compatible with my C870?
  It seems to fit but I wanted to try it incase it damage the battery or something.

  Any advice will be greatly appreciated.

  On the first picture you can see the values:
  * 19V * (v) * 3.42A* (Ampere)
  On the second picture, you can find the same values.

  If two adapters providing the same volt Ampere and should be compatible.

• Satellite Pro C660-16F: power adapter that is compatible

  Hi all

  I recently lost the charger of my Toshiba Satellite Pro C660-16F.

  It provides the output DC 19V - 3, 42A

  My father also has a Toshiba Satellite, model A300 1RF

  Supplies of its DC 19V - 4, 74A Chargers

  I don't know if I can use the charger of my father for my computer, like I don't know
  If it is just the current or excessive current it can cause damage.

  Can someone give me the answer to that?, thank you very much in advance!

  Hello

  You can use another adapter 19V.
  The value of the Volt is very important. You can ONLY use the power adapter that supports the 19V
  The ampere is too important, but it may be a little different.

  Your original adapter supports 3.42 Ampère and other 4.74. It's a little higher but not really relevant.

• Satellite Pro A10 - need a part number for power adapter compatible

  My son has the older Toshiba Satellite Pro A10 Intel Celeron 2.0 GHZ 256 MB 30 GB DVD/CD-RW 14tft monitor.
  His diet no longer works, can someone tell me the power adapter part number that I am looking for a new one for him.
  I need to get a reference number and any number of compatible power cards.
  Appreciate any assistance.
  Thank you
  Jane

  Hi Jane,

  I think the part number you need is PA3283E-2ACA

  Find out on the following link: -.

  http://www.ebuyer.com/customer/products/index.html?action=c2hvd19wcm9kdWN0X292ZXJ2aWV3&Pro duct_uid = 64945 & _LOC = UK