Defender starts at the beginning

Similar Questions

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• Xp pro installation gets past the copied installation files and then restarts, rather than continue with install it starts from the beginning again.

  new installation of XP pro on a Dell Inspiron mini

  Xp pro installation went copied files Setup then restarts, rather than continue with an install it starts from the beginning again, laptop is configured to boot from the hd, but does not do that, I reset bios to default and hd settings has been reformatted, the cd for this laptop drive is usb because it has not built in 1... If I try and I remove the usb cd when reboots after copid setup files it told her there is no operating system...

  any help much appreciated...

  Hi, Leon,

  Always include computer make and model, please.  Thank you.

  Research in the Bios (reboot and press F1 or F2 depending on your system, check that all usb options are enabled (for example, USB legacy or support for USB 2.0 devices).)

  If there is a timeout parameter, set it to Max.

  Then, find the boot device priority section

  A USB flash drive, which is usually listed as USB - HDD, but may be listed as a removable device, will have a priority very low start.

  Rearrange the boot device priority so that the flash drive has a higher priority than the hard drive.

  Install Windows XP from USB key

  • Insert the USB key into the USB port on the computer.

  • Open the "I386" folder and find the file "Winnt.exe".

  Double-click on the "Winnt.exe" to launch a command prompt BACK to an installation of Windows XP.

  Type the path of the location of your "I386" folder in the DOS window. For example, if your USB is the letter "D" in your "My Computer" window, type "d:\i386" without the quotes and press the Enter"" key.

  Let the installation program copy the Windows XP installation files on your computer.

  Restart your computer to a command prompt. The Windows XP Setup will continue automatically.

  Follow the on-screen instructions to complete the installation. The program will ask you your Windows XP product key in this process.

  http://www.ehow.com/how_6912418_install-Windows-XP-USB-drive.html

  Make a bootable memory card or USB key using PEBuilder

  http://www.tech-recipes.com/Rx/2583/making_a_usb_drive_or_memory_card_bootable_using_pebuilder/

• Why it starts at the beginning?

  In older versions of Windows Media Player - the system picked up where the last/story/cd/whatever song arrested and the next time I opened the player is where he would have started playing.  In more recent versions of Windows Media Player (that I currently use c. 11), it always starts at the beginning of the very first so I need to find where it ended last time, and restart from there.  I would like to be able to pick up from where it left off - how this can be reset to the to do?

  WMP is not a built-in feature to restore the last playback position. However, the Windows Media Player Plus! plug-in adds such a feature in WMP, then I suggest that you try it.

  (The plugin official site is down for maintenance at the moment, but you can still download the http://download.cnet.com/Windows-Media-Player-Plus/3000-2169_4-11445552.html plug-in.)

  Tim Baets
  http://www.BM-productions.TK

• You can change a song somewhere in the Middle rather than start from the beginning?

  You can change a song somewhere in the Middle rather than start from the beginning?

  Hello Gene,

  Currently, there isn't a way to do. It's a great idea and we will certainly look at it later!

  Thank you

  Bronwyn

  Community Manager for first Clip

• Remove the starter at the beginning of the demo button

  Does anyone know how to remove this start at the beginning of a demo button?

  

  Some devices do not allow for automatic reading, is the reason for this Play button only in the output of HTML5. You won't have it in SWF output unless you disable AutoPlay

• FledgeHook should run whenever a simulator is started or can I just he start at the beginning of my day?

  C:\Eclipse\plugins\net. RIM.ejde\vmTools > FledgeHook

  Make FledgeHook every time I start a Simulator or can I start FledgeHook at the beginning of my day and let it run without having to start and stop each session Simulator?

  Edit: I started the Eclipse Simulator and run FledgeHook from a command prompt and it runs for about 10 seconds and then closes - I can watch it in the Windows task-> process manager.

  Is it supposed to do?

  Hi Todd.  Thanks for the clarification and sorry for be not more detailed in my earlier answers.

  As you indicated, there are essentially two ways to close the Simulator: out of in the Simulator itself (output, x-button at the top, etc.); Select disconnect from the Eclipse.

  In the first scenario, Eclipse closing the Simulator itself, is never notified the fence on win7 64-bit, and if the process is around.  Where the need for a FledgeHook be executed until we can make the plugin do that for you.

  In the second scenario, when you click Disconnect in Eclipse, Eclipse 'knows' you try to shut it down and are able to clean the process, without the need for FledgeHook.

  In addition, it is only a problem with pre - 6.0 simulators.

  Are there opportunities you can test both scenarios that I pointed out and report to confirm that this is actually relevant to your experience?

  Thank you!

• RAM Preview starts at the beginning of the work area

  Hello

  I've just updated my computer to AE CC 2014 running on OS X Yosemite, and I searched around, but can't find anything on this subject.

  When I do a preview RAM of my workspace, it will not start playing from the beginning. It loads the entire work, and if I sound/music I can hear the music start playing from the beginning, but I do not see the image plays until after about 1 second.

  It is not because of the RAM preview of"current time" parameter, which is off.

  Data sheet:

  MPB retina end of 2013

  2.3 GHz i7

  16 GB OF RAM

  GeForce GT 750M 2048MB

  OS X Yosemite

  After Effects CC 2014

  See the description of the problem here:

  http://bit.LY/AE_MacOS_Yosemite

• can I restart my mac - pro to start from the beginning I / ve he had only 2 days and I think that I / ve screwed it up

  can I restart my mac pro from the beginning.i/ve really messed it .i/ve only had 2 days.thanks

  A new Mac comes with 90 days of free technical support, AppleCare.

  Please call AppleCare.

  AppleCare: 1-800-275-2273

• Start at the beginning of a progressive video?

  With the help of CS5 Master Collection.

  I have a video encoded in a 30 MB FLV using SOUL off body and then created a SWF with Flash using a standard Player skin to get the option full screen which seems not to be available in the DW skins.  This works all fine locally in trials of an HTML page by using the code provided by Flash.

  When uploaded to the web server, there is a long delay while the entire file video downloads before replay.

  Two years when the last I did I was using an earlier version of the software and remember that there is a parameter to start replay much earlier than that. But I can't find it in CS5.

  I tried playerID.bufferTime = 10 in the AS3 code in the SWF without result.

  How can I convince the video to begin playing more quickly without waiting for the full download?

  Thanks for some lights.

  I would say that the problem is in the .flv... or maybe it's a f4v (flash to a mp4 version).

  There is a delay so that the entire file video downloads before replay.

  This means that the file is not be progressively downloaded, so length of the buffer has no effect meaning.

  Your problem sounds like the issue of MOOV ATOM often lived with mp4 QuickTime files. Index 'movie atom' bringing the size of the file is at the end of the file, preventing the progressive download. The solution to this problem is to exchange the MY to the rear of the backrest forward.

  More info here:

  http://Renaun.com/blog/code/QTindexswapper/

  http://www.YouTube.com/watch?v=8c8oqNX4b3k

  Best wishes

  Adninjastrator

• only the wallpaper don't start menu icon or start from the beginning. How can I solve this problem?

  This problem happened very suddenly... Everything was fine the day before. Thank you

  It's a good start.

  Think the process explorer.exe as your office.  If it does not work because the file is missing, you will have no office or the taskbar, or start button until it runs, so you need to replace.

  c:\windows\explorer.exe file should never be missing.

  It is even difficult to remove on purpose since it's a protected Windows file.

  You haven't told us your situation Antivirus antimalware software, but I suspect whatever it is (effectively deleted) quarantined your explorer.exe file.

  Since it is a protected file, there should be a copy backup of the file in this folder:

  c:\Windows\System32\dllcache

  or, depending on your installation, you might find a copy in this folder:

  c:\windows\ServicePackFiles\i386

  You must use the Task Manager to click file, new task, browse... and navigate to these folders and search for a backup copy, and if you find the explorer.exe file, copy (Ctrl-c) and paste then copy it (Ctrl-V) in the c:\windows folder where it belongs to replace the missing file.

  Since it should never miss, the backup copy may also be missing, so I put one on my SkyDrive do you can download (sinus your Internet Explorer works) and replace the file c:\windows\explore.exe.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, it cannot save the file with an extension (for example, .exe, .dll, .cpl, .sys) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called explore when the name of the file should really be called explorer.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  You could also get a copy of explorer.exe from a working system and copy it to a floppy or USB key and use the Task Manager to browse replace the file (in two places)

  When the file has been replaced, use use the Task Manager to run this command again:

  %windir%\explorer.exe

  (%windir%\System32 is the c:\windows folder)

  How is it now?

  If it looks good, reboot and then run these scans:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• Windows Vista does not start after the beginning upward

  My computer won't start Windows Vista after startup, I tried startup repair and it gave me a screen type scrambled at the end.  When I let him start normally I get a black screen and when I do the Startup Repair I get every time the same garbled screen. I tried to reinstall Windows Vista, but when I put the disc in my pc it did nothing. How can I reinstall the operating system?

  Hello

  Startup Repair might not have worked however the SFC, CheckDisk system restore and then even a new attempt of
  Startup Repair might work.

  Try the repair to start the Recovery Console (if you have a) or from a disk of Vista - if you have not a
  Disk of Vista, you can borrow a friends (they are not protected against copying) or make a. The manufacturer of your system will also
  sell cheap physical disks since you already own Windows.

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Vista disk

  SFC/scannow
  Press enter

  and after that runs away

  Chkdsk /f /r
  Press enter

  (Spaces between C and / k and / and f and /)

  Retry After Chkdsk startup repair.

  If after those try you system restore from the recovery or Vista disc.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  Retry if necessary startup repair.

  =================================================

  To re - install:

  Check with your system manufacturer that they all slightly different methods. They may have included a recovery
  Partition or other methods to restore the default value. Also your system manufacturer will sell you the physical disks at a great price
  Since you already own windows.

  What are the system recovery options in Windows Vista?
  http://windowshelp.Microsoft.com/Windows/en-us/help/2b3724d1-f4ad-5b26-16dc-3e9e66f4be5e1033.mspx

  This tells you how to access the System Recovery Options and/or Vista discs
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  ----------------------------------------------------------------------------------------

  Check with your system manufacturer support as they may have understood, Partitions recovery Vista DVD, and/or
  other methods to return to the original configuration.

  Here it is just a few options and you should contact our service system Maker to be sure
  you know all the options you have.

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Audio only plays when started from the beginning?

  Hello! I'm pretty new to Flash, I consider myself a beginner, but recently I've been commissioned to do an animation for someone! There is a song played in the animation, it is a wav and it is on its own layer. There are also drawings that I imported in too.

  My problem is, I want to be able to synchronize the little drawings for the lyrics of the song, but the sound does not play when I starts at 0 on the timeline. If I had to start we are going to say plot of 24, it will not play. Does anyone know how to fix this? This commission must be completed by Wednesday and it's a process S L O W, duty again only to hear as one or two words later

  Change the property to sync (in the properties panel after you click the keyframe where starts your sound) of the workflow event.  Repeat the test.

• Hi I recently transferred my mini iPad iPad pro data now all my game data is lost on both devices. It starts from the beginning of the games. Consedring I played all the games for 2 years, it's really sad. Any advice?

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro. Now all my game data was lost. All of my achievements and waiste game purchases. All my games is in the stages of early on both devices any help?

  Blazeyboy wrote:

  HI I recently transferred all my data from my iPad to a whole mini new iPad pro.

  How do you transfer the data? Do you have the old iPad to backup and then restore this backup Pro iPad? Have you followed these steps?

  Transfer the contents of an iPhone, iPad or iPod touch to a new device - Apple Support

• Recovery USB key comes with write protection error when starting at the beginning of recovery

  I just got my key USB recovery flash in the mail from HP.  I have an ENVY 15 t-j100 Quad and I had accidentally wiped the OS off the coast of the SSHD.  I go into the BIOS, change the boot order, even tried disabling and enabling legacy mode secure boot and I get the same error once I have tell the laptop to boot with the USB key.  He comes up with an error cscript.exe and says that it is impossible to write in the C: disk because it is write protected.  I can cancel, try again or continue, but the laptop stops just after these buttons.

  Any help would be appreciated.  Thank you.

  Ryan

  I had set up the SSHD acceleration and 24 GB cache in a RAID0 configuration, as if it was before I wiped the OS.  Apparently, which caused the error, because recovery what USB works fine once I reset both drives non-RAID configurations.  I'll be able to put back them in a RAID0 once the OS is installed?