Define Booleans in a global cluster with variant
Hello
I want to reset the Boolean values in a global variable that contains a single cluster. I use the variants, but I have this error:
Property node (arg 2) in GetErrorList_Global.vi
Value of the property Name: See the reading circle in the image below. FYI, the upper part of the VI is used to read the value of the label of each true (which means that each label error). Thanks in advance for your help. What you could do is this: since you have the individual items in the cluster control and use it in the loop, the Boolean value here. /Y Tags: NI Software Keep the previous data - Global Cluster control I needed to enter a lot of information at the beginning of my program labVIEW with the following structure: Commercial equipment Function generator Manufacturing Model #. Serial No. Calibration date Graphic recorder Manufacturing Model #. Serial No. Calibration date Digital Voltmeter .... Material test ... So I created a Subvi for this entry using a cluster of clusters of orders of the chain. If something is wrong or that you close the program, you must enter all the information again. I am trying to use a global variable to store my cluster. When I run the program I would pull the global last data entries. How to read the global cluster of control without unbundling and grouping a mess? THX Look in the library GXML. He must do exactly what you ask. Add Server ESXi in Vcenter 5.5 cluster with a different number of socket I have 5 nodes compute node IBM Flex System X 240 8737T7M with 2 CPU Socket in a VMS Cluster with identical hardware and now I need to add 1 more IBM System Flex X 240 node calculate 8737T7M with 1 CPU Socket in the same cluster. Here are other points: -. VCA Mode is disabled in this cluster. 5 existing and new are the same model of CPU and memory is of the same capacity. Only the difference is 5 knots with 2 sockets and another node is 1. Please notice is recommended and he face any technical problem. VMware ESXi 5.0 and Vcenter is 5.5 Hello VCA mode is not required when the generations of CPU on the server is the same. Adding your host in the cluster will work then. He advised not to add servers to a cluster with mixed material config. A possible problem might be the Admission HA control for example settings. If you configure a number of hosts reserved for failover, you may encounter problems with your hosts do not match each other. Here, you define the ability to failover in percentage. Tim Initialize the cluster with data types different (lots of data) Hello I have data, which are composed of different data types. First of all, I have initialize cluster with these types of data and then "print" to light (photo). In case of photo data carries 8 characters than ja 4 floats. It was easy to initialize, but here's the question: How can I do this even if I have data that look like this (interpreter): floating point number name char [32] Short value [16] What I create loooong cluster which have a fleet of 32 characters, 16 short films? Or I can create these 'paintings' in a different way? THX once again -Aa- I suggest using the table-cluster and configuration of the cluster size to match the size of your berries, then package these groups together. In terms of storage of LabVIEW, there is no difference between a group of floating point number Name1 tank name2 tank ... short value1 short value2 ... and a bunch of floating point number -> cluster shipped from Name1 tank name2 tank ... -> cluster shipped from short value1 short value2 So you can use the cluster table to get the right sizes rather than individually create all these values in a single giant cluster. How to connect the cluster with unbundler the help of scripts of VI Hello I'm not so known in Labview. I am tring do VI script for you to connect to a digital cluster with a unbundler. I could create cluster and unbundler. But I am not able to connect. I have attached the VI and the image of the code. Help, please... Thanks in advance...! Sharon Same VI compiled to 8.6 Christian Filling of cluster with references Hello I use "reference clusters" (def of strict type) and they make life much easier when you have a hand VI with a few controls and indicators and to change a property of one of these objects to a Subvi. Everything works fine when I have all the objects in a single VI and want to fill the cluster with "real" references, and valid. However, when I couple objects in several different screws and want to fill a single cluster with references, I get errors. What is the best way to get this? Attached two ZIP files: Method.zip first and second Method.zip Unzip the first Method.zip in a folder, and then open VI_1_First_Method.vi. Run the vi and keep your eyes on the white gauge. Everything works fine and VI_2_First_Method changes the background color of the white gauge. Unzip Method.zip second to another folder, and then open Populate_with_real_references_Second_Method.vi. Look at the block diagram. How to fill the Cluster_Second_Method.ctl with the "real" references objects VI_1_Second_Method.vi, VI_2_Second_Method.vi, and VI_3_Second_Method.vi? Thank you very much. Dan07 You can do this way: Extend the current TMS Cluster with two new server Hello We currently have a cluster of two TMS-Server (13.2.1) installed on a W2K3 Server with a database on a SQL-Server separat To have a smooth migration, we thought the following procedure. Addition of two new server with W2K8 R2 by installing a TMS 13.2.1 to the cluster with access to the same database. After a while remove the two old server and upgrade to TMS14 (updated TMSPE in advance). Unfortunately, we get the message, as seen in the PNG-attachment during the installation of the first server in new. Anyone know if we could proceed as described above? Is the message because of the different operating system. If I click on 'Yes' former TMS-server still works? Thank you Concerning Ingo Hello The error message is misleading and can be safely ignored, and you can continue with the installation of the new TMS nodes. It was deleted in 14.0 TMS, see bug CSCui34702. Kind regards Kjetil Can we define a field value of contact with the CRM campaign settings ID campaign? Hello Can we define a field value of contact with the ID of CRM campaign? For example: LAST campaign SFDC ID (field of contact) = CRM campaign (campaign) No. The Eloqua campaign canvas has the possibility to update CRM directly with the status of the campaign on things like email send or clicks. IF you set these shares to be among the rules of the answer, then as they happen, they will create/update records of campaign in CRM directly responses. However, this will have an impact on information in Eloqua. Can this load balance and HA cluster with vsphere? Hello community! Really new on this type of subject, so forgive me if IAM iam do or say something wrong. I'm here to try to understand better this amazing tool so I apreciate your time and knowlodge! I read a lot but still I can't have a full understand abt, so if anyone tries to explain something, please be patient and explain with precision. All doing wrong if you really work at home as a LABORATORY, and I can do it, hurt trying to use it to get a job because I don't have and I really need one soon! Well ill to explain it, I have clients that will send a work for my DB load process, which will affect on MSSQL Server installed on the 12 TB logical drive created from the union of all methods virtual storage. Each virtual storage is just a virtual disk created on a virtual machine that is hosted on the physical server (node). So I have 4 physical server which have 1 VM each with 3 TB of virtual disk, the goal is the customer can send the process of workload on 4 nodes to have a quicker response, and if a single node fails for any reason, the other node can operate withow problem. physical server Medley: don't know yet if I have to use one or install VMWARE directly. Sagna VM: Windows Server 2008 (don't know if necessary or if I can just install SQL Server directly) MSSQL Server VM: 2008 Enterprise (still don't know if I have to use this one) Well I can't think right now on the other details, but if you tell me ill be happy to write it. Sorry if my writing or semantics is false but English is not my first language. Really thanks to get to this point and share your knowlodge! Best regards, josh of Argentina! Josh, please correct me if I'm wrong, you have 4 knots of MS - SQL, and you need to read/write at the same time in a shared database of 12 to. If this is the case check the following documents: VMware KB: MSCS support improvements in vSphere 5.5 Clustering using VMDK sharing between virtual machines https://www.VMware.com/PDF/vsphere5/R55/vSphere-55-configuration-maximums.PDF The above covers the part of the diagram which includes 4 nodes SQL and the shared database, the other part of the client to the SQL nodes that segments the loads on the nodes, I think you should see Microsoft options.
I found a few relevant links below: https://ask.SQLServerCentral.com/questions/51824/cluster-with-more-than-2-nodes.htm l
Cluster with VSphere Essentials When I try to create a cluster with VSphere Essentials (no more) I'm offered HA and DRS (they are not greyed out, they are available). Are these trial versions that will be disabled in the future, or they are now included in Essentials? My understanding is that they would be unavailable at all. that is, they would be gray. To view your features under license: All licensed features are presented here. Search for "VMware HA" and "VMware DRS" see if they are allowed. Add esx cluster with different cpu Hi all I have a cluster with 5 esx 4.0 u1-208167, which installed on IBM x 3550 M2 ((2 x Intel® Xeon™ processeur E5520) .) I want to add a server to server cluster .the is IMB x 3550 m3 (2 x Intel® Xeon™ processor E5620 4 c) do I have to make a chenges on Esx servers / vm / vcenter when I add the new esx for my datacerter and to the cluster so I can do Vmotion / storage migrate this server in the cluater (I have the appropriate license and plug)? Thanks for the help is there another way to activate the CEV on my existing cluster and does not create a new? You can try to create a new cluster and select CVS it and move all your hosts to this cluster should I turn off my vm all? You will need to put the hosts in maintenance mode. So what you can do is put the host 1 in maintenance mode, virtual machines will move to host 2. Now move the new active EVC cluster host 1 and continue to do this until all of your hosts are in the cluster. You can try vMotion your VM 2 host to host 1 which is now in the new cluster, but it all depends on what your processor will hide VCA is activated... And if you cannot vMotion, virtual machine in a VCA not to an active evc cluster cluster, then Yes, you will have to turn off and restart your virtual machines in the new cluster I also have SRM ad site.do I need to activate the CEV on the cluster, I have here (a different Vcenter) No u don't. Follow me @ Cloud - Buddy.com Can you have a cluster with a single host? Hello I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location. They will all be managed by server unique vSphere. It is possible that the second site can earn an additional ESX host at some point in the future. So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host? Is it possible to have a cluster with a host, and what are the consequences of this? Thank you Joe Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node. And, both from a technical point of view, but especially from a point of view BAU. Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist. From a personal point of view my current client runs a number of single-node clusters, in their environment. If I have a Cluster with ESX 3 and if one of them, I want to know the process of HA, on which ESX my VM would be transferred. We do not have DRS I'm looking in config HA, and I don't see the configuration option. Thank you .. My VM would be transferred on which ESX? On others, depending on the resources available to them. All I know is there nothing HA settings, where you can specify this. You could set up - which IMO would not have made much sense - the affinity of host for each virtual computer work only on two hosts. You could also spend a host as a failover host. I suggest that read you http://www.yellow-bricks.com/vmware-high-availability-deepdiv/ for more information on HA. André Change the Ip address of a cluster with Vsphere4 Hi all I need help for work I have to do today. The problem is: -I need to change the ip on my local network addresses, the structure is entirely managed by Vsphere 4. -Now I have a HA cluster with 3 hosts, and I need to change the ip addresses of these servers Host1, 2 and 3 and the virtual Center host I ha ve a domain. Please, what is the best practice for this job can someone help me with this procedure? Thank you very much My steps are: (1) client connection vsphere in the center of the existing, disconnect all hosts and remove (2) stop vcenter services and change IP (3) start the vcenter services (4) change the address IP of ESXi console x 3 (5) connection client vsphere with vcenter new ip address and add 3 hosts. make sure that any dns or hard-coded host name are modified. iDLE-jAM | SC 2, SC 3 & VCP 4 If you have found this device or any other answer useful please consider useful or correct buttons using attribute points Can I create different consistency nodes in the same cluster with defferent? Yes. You can create different consistency nodes in the same cluster with cache files - config.xml defferent as long as you use the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml. But you can't store the data in the cache in the various nodes (created with different cache-config file). In other words, a node only to create their own Hide modes that are launched with the same cache file - config.Xml. See the following demo: D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd The following command starts a cache client. But when I try to store data cached from the client side, it reports the error message: it is staorage-disabled people. It shows that this console cache cannot store data in the server cache existing since then using different cache config files. Under all: permissions I put plug-ins for 'always ask' under 'all pages '. However if I set any page to "allow" all pages is set to allow. The simply looking at "all pages" will be solved I return to "always ask" for all pages. However, regardless of Setup requires Win 7 on target, even if XP Service pack 3 is selected After the last update (done with the update service OR) for my installation of labview 2014, all created with the application builder installers require Windows 7 Service Pack 1 must be installed on the computer target in case contrary it puts an end Basically, a Boolean control gives a result: true or false. So, what's the difference between 'Cancel' and 'stop', the two Boolean controls in the palette of the façade? Mysteriously, I saw "off" in other programs. Where is he? It is equal to cancel Want 5530 printer all-in-one: passcode for printer 5530 envy I have a 5530 desire. When I had a problem with a sweep I phoned HP and the shore off rep screwed to the top of my HP printing so badly, I still suffer and no phone support. I need the passcode on this printer information. I have all the passwords using the wrt54G as access point WiFi for iPod I have this Setup:(I'm in a trust of a larger network LAN]. [Campus network: 192.168. *. *]------------------------------|+ [local switch]--------------|+ various machines (in 192.168.10.xxx)+ Pc1+ pc2+ ...+ [Linksys WRT54G] (for WiFi)---------------
Similar Questions
Im trying to create a failover and balancing cluster with Vsphere, the goal is try to install an MSSQL DB server where the customer can access more quickly and do not have downtime when a node is down.
Here is my diagram is possible?
A cache can be distributed in these nodes of deffirent?
I start a cache using the cache config examples-cache file server - server.xml. Then I start a console cache storage-disabled people (client cache) by using the config file coherence-cache cache - config.Xml. Two of them using the same file tangosol - coherence.xml and the same file tangosol-coherence - override.xml.
The cache server uses a cache service PartitionedPofCache. But the client side using the Distributedcache service. The cluster address is same 224.3.5.2.
The name of the cluster is also samme. They know.
D:\coherence\lib>D:\examples\java\bin\run-cache-server.cmd
The system cannot find the file D:\coherence.
The system cannot find the file C:\Oracle\Middleware\jdk160_11.
2009-12-22 12:09:31.400/4.987 Oracle Coherence 3.5.2/463
D:\coherence\bin>coherence.cmd
D:\coherence\bin>coherence.cmd
** Starting storage disabled console **
java version "1.6.0_11"
Java(TM) SE Runtime Environment (build 1.6.0_11-b03)
Java HotSpot(TM) Server VM (build 11.0-b16, mixed mode)
2009-12-22 12:12:21.054/3.425 Oracle Coherence 3.5.2/463
Map (ca3): cache ca2
Maybe you are looking for
