Change the Ip address of a cluster with Vsphere4

Similar Questions

• Are there problems with changing the IP address of a system of v5.3 ACS after the initial Setup?

  I'm migrating from ACS v4.2.1 to v5.3.  I want the final v5.3 system to assume the IP address of the machine 4.2 of origin so I don't have to change any configs on network devices.

  Are there problems with the change of the IP address of the system AFTER the initial installation v5.3?

  I tried without problem. I changed the ip address of the WLC several times.

  You must ensure that:

  1-) you change the switchport accordingly to the appropriate vlan if the new ip address belongs to a subnet of a vlan different.

  2-) make sure that all clients AAA configured to use the new IP address of the ACS servers.

  Here is the procedure how to change the ip address of the interface (according to the doc of cisco):

  http://goo.GL/0BYqVT

  I also changed parIP normal address and it works. but of course, the server must be autonomous before doing this step (i.e. no secondary ACSS registered to him and he is not on the other ACSS in a distributoin).

  HTH

  Amjad

• Is it possible to change the email address associated with my account?

  Is it possible to change the email address associated with my account? Accidentally, I registered my account to my personal email address and need to change.

  Hello Andrew,.

  Here's the reference documentation:

  https://helpx.Adobe.com/document-cloud/help/changing-your-email-address.html

  Kind regards

  -Usman

• How can I change the email address associated with my account Echosign?

  How can I change the email address associated with my account Echosign?

  Hi Elaine Gibbons,.

  Please send an e-mail to [email protected] and make sure you mention your current echosign e-mail address and new e-mail address.

  Kind regards

  Rahul

• Hello world! Is it possible to change the eMail address in the form of muse with in the editing context?

  Hello world! Is it possible to change the eMail address in the form of muse with in the editing context?

  Hello

  This feature is not available with the edition of in the browser. but you can change the e-mail address of the site admin dashboard.

  If your site is hosted with BC, you can find options as below:

  To change the "E-mail" field, go to:

  Site manager > Web Forms > click on the form name > e-mail Notification

  To change the "E-mail" field, go to:

  Site manager > system email > set default ' origin' Email

  It will be useful,

  Sonam

• How to change the mac address with a mac myself?

  Hello

  I need help to change the MAC address of one of my VM in a configuration.

  I need it because I need to do some testing on a program and the program's tie to the MAC address.

  I see how to reset the MAC, but not how set one I want... could someone help me with this.

  Lafa91

  BTW I have french speaking first of all sorry in advance for my bad English.

  Lafa im not very familiar with labmana. but the alternative is that you change your MAC address in the guest NETWORK adapter settings OS

• What is the best way to change the IP address of management vmkernel on a vDS?

  Hi all

  I'm changing the IP address of the management interface vmkernel with as little downtime as possible and markets.

  The interface is part of a distributed switch and the host is part of a cluster on the vCenter server.

  As for now, here's what I do:

  (1) to migrate all virtual machines on the host and put it into Maintenance Mode.

  (2) remove a vmnic from the vDS and add it to the standard switch (which guarantees access to the management of VLANS).

  (3) move the core of the management of the vDS to the standard switch.

  (4) remove the host to the switch of the vDS.

  (5) remove the host from the inventory.

  (6) change the IP address, then make the changes in the DNS in accordance.

  (7) re add the host to the cluster of vCenter.

  (8) apply a profile of the host with the previous configuration (config vmnic, vmkernels, etc.).

  (9) correct the host profile.

  How do you do it?

  Greetings,

  RO

  Take a look at the post of Chris Wahl

  Application of new IP addresses to vCenter, hosts of ESXi and Plugins - network Wahl

  As long as the hosts are connected to vCenter using their FULL domain name, you wouldn't remove them from vDS, etc..

• Why my officeject hp 4500 continue to change the ip address?

  When my officeject hp 4500 goes to sleep and I try to print it doesn't work because it changed the ip address.  I then have to remove and reinstall.  How can I fix?

  It depends on the model of the router.

  Assuming you have a House with a router, connect as admin (the installer first person the router must have the password). list of connected devices, if there is a next button that said 'reserve ip address', click next to the printer, and you are finished.

  If none of these butotn, you will need the manual for the router, that show you how to assign the ip address fixed.

• change the ip address of HP1522 and software HP1536 of scanning on workstations

  We want to change the IP address of the device to network HP1522mf and HP1536mf printers/scanners.

  We have already installed the scanner on XP SP3 workstations software. How to configure the new IP address of the HP (printer/scanner) device on workstations without reinstalling the scanner software complete on each workstation.

  SparrowJack wrote:

  ...
  You can change the name in the registry

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0000]
  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0001]

  ...

  This was very helpful, it was so close, I'm sure you would have found eventually.  Thanks for pointing me in the right direction, I had the same problem with my CM 1312nfi and here is the solution:

  Access

  [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {6BDD1FC6-810F-11D0-BEC7-08002BE2092F} \0001\DeviceData]

  Confirm the REG_SZ named CUEDeviceID is the device that you want to change.

  Updated the REG_SZ named NetworkDeviceID...

  Change the IP address in the string to the new IP address

  for example. \hostname:NPI74FF08\ipaddr:192.168.0.25\guid:\macaddr:00237D74FF08\port:1

  Change the REG_SZ named PortID to the new IP address.

   

  Record.

  You should be good to go, try scanning, it worked for me.

  Remember, «it can't be done, reinstall...» ", is never the right answer.

• I can't access the IP4 properties to change the ip address.

  I can't access the IP4 properties to change the ip address. The laptop connects to the network and has the internet connection but when I try to set a specific ip address tab of connection properties for ip4 and ip6 wireless network is grayed out.   Is there a setting in Vista the automatically it controls and does not allow access to change?

  I put IPs for the other 5 computers at home for use via my wireless router and have no problem with any other computer but one of Vista.

  Hello Jimmy,.

  I recommend trying the steps described in the Jack post that is marked as an answer in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/tcpipv4-properties-button-disabled/347899fa-b60a-40A3-AD2C-78ef5e0dca37
  The thread is in the Windows 7 forum, but the diagnosis also applies to Windows Vista.

• Procedure to change the IP address to the Dell compellent

  We have an obligation to change the IP address of compellent Dell storage management. Here is the proposed procedure I created

  1 connection to the center of storage of Dell & change the IP address of the slave controller first

  2. change the IP Address of the controller (Chief) then

  3. change the virtual IP address of management

  4. then change the config to the switch (end of network)

  I am not sure with this procedure, as the change of the IP address of the controller will be the loss of connectivity management. If please specify or let me know if you have any other procedure

  Thank you
  Saran

  Reference Dell Enterprise Manager 2015 R3 Administrator's Guide, page 189 "Managing Storage Center Network Settings"

• Some components missing CUCM sauvegardΘ after you have changed the IP address of a Subscriber

  a strange problem with cucm backup... After we migrated the cucm one taken sub. from one place to another and changed the ip address, some components were not in the backup, including TFTP

  Backup successfully(100%) finishing, but when we check some five components were not in the backup.

  When I searched in Cisco site, I received the following:

  "Sometimes, after an upgrade, some services are not registered to DRS.

  Workaround

  --------------------------------------------------------------------------------

  Step 1 during the maintenance window, log on to the server in the CLI editor and run the utils disaster_recovery show_registration servername command.

  This command lists all the components registered with DRS for the backup on the server for the specified Subscriber.

  Step 2 disable and re-enable any component that is not registered to this server backup.

  Step 3 run the utils disaster_recovery show_registration servername command again to check the component is registered for backup. "

  Can someone help me with the command to disable and enable a backup component?

  Thanks in advance,

  Fox.

  You have to basically disable & re-enable the service associated with this component not registered. for example if TFTP is a constituent unregistered, then disable & re-enable the service TFTP Cisco of the activation of the service. Then CLI, issue command 'utils disaster_recovery show_registration' & you should see the TFTP component registered with DRS.

  Similar procedure must be done for the other missing items.

  GP.

  Pls rate helpful messages by clicking on the stars below the post!

• Change the IP address of the external Interface

  I need to change the IP address of the external interface remotely.  I have SSH in to the ASA plan and make a change.  I can't be there to make this change, since the site is out of State.  There will be problems?  The current configuration is

  interface Ethernet0/0
  nameif outside
  security-level 0
  IP 66.102.7.22 255.255.255.248

  The new IP address will be 66.102.7.18 255.255.255.248.  Also, is this the right syntax?

  interface Ethernet 0/0

  no address ip 66.102.7.22 255.255.255.248

  IP 66.102.7.18 255.255.255.248

  Thank you.

  Diane

  Diane,

  If you access the ASA via its public IP address on the external interface, and if you change this IP address, you will lose communication with the ASA.

  It's better if you can make the change from the inside.

  If you need to change remotely, you can change the IP address, and then try the SSH connection to the new IP address.

  However if a problem occurs, you cannot access the ASA.

  The syntax is correct.

  Federico.

• change the IP address of the ACS

  Hello guys,.

  I will be soon changed the IP address of my ACS server because I will move it to a new VIRTUAL LAN. the ACS is also integrated with Microsoft Active Directory users for authentication to the wireless lan users.

  My main concern is that if I change the IP address of the ACS, I have to do something on the Active Directory Server? I have to all certificate related issues? GBA I am running is version 5-1-0-44-6.

  all opinions are very welcome and appreciated.

  Hello

  change the IP will not affect the certificate of the ACS, or join the domain,
  in the worst scenarios, where you face the problem of having to return to the field "can be secondary domain question or problem to clock" you can simply remove the entry of the machine on the side of the field and re - join the domain "I hope that you won't have to do", but even if you need it won't take more than a few minutes.

  see you soon,

  Mohammad,

• Internet connection is slow after changing the MAC address

  * Original title: win7... problems with internet after changing the WIRELESS card MAC address

  I have win7 home ed... .i tried to change my WIFI MAC address of the card (I had a reason to do so), SMAC program change but I could not, the address remained the same... I changed my mind... has decided to forget about this topic... but unfortunately, I had a big problem (very probably)... the internet connection is too slow or stop a few times pages load too slowly or especially do not charge. downloads are always stop in network on Chrome error... I tried a different browser to check, but the problem exists with all explorers, it's big terrible trouble please help me (Note: this problem is related to some how with internet traffic... late night speed is much better, but not 100%... but of course not as speed) ", I had before changing to MAC)... Thank you very much

  Hello

  1. what made you want to change the MAC address?

  2. what exactly happens while you are trying to connect to the internet?

  3. you receive an error code or error message? If Yes, what is the full error message?

  4 have you checked the issue in internet explore as well?

  Please follow the steps below and we update with the results.

  Method 1: Run the network troubleshooter, and check.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Please try following the steps provided in the article and check out them.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For more information, see the articles and check out them.

  10 tips to help improve your wireless network

  http://www.Microsoft.com/athome/Setup/wirelesstips.aspx#fBid=hq7zl63PiZ9

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if it helps!