Define, initialize, complete tables

There are a few posts on this topic, but none I can present a complete solution - so let me set out my problem and I hope...

I need to initialize a set of tables that will be used to maintain contact information - there are about 100 I want to fill it with the text when the Flash loads - so:-I thought that I set up a loop to set the names of the required table, created and fill then all of a sudden - well that's what I thought...

I can set variable that trace the good names of table on the screen, but when I refer to push their text, I get nowhere.

Here's my loop: -.

-J' joined the code snippet...

No error reported, but no data not created either...

OK - I admit it; This code snippet is kinda a mess - but, in my own defense - it is the result of a half-day of screwing around and try all kinds of what it is to run - so, having slept on it and had a chance to think - I think I'll go back to square one, then take the next step back and start over.

FWIW - all I wanted to do was create an indirect reference to a number of paintings in a number of groups, each containing a set of coordinates. I need this number, approximately 100 as I said, so I thought it would be child's play to set up a loop to initialize when my project - rather than having to code each initialization turn her - however, I have now lost more time it would have taken always to hand code this blindfolded , with both hands tied behind his back!

From and to the top

Thanks anyway

Nigel

Tags: Adobe Animate

Similar Questions

  • T1120 initialize completely upward, not how to fix it?

    I have a HP Designjet T1120 44 inch printer that 100% goes into the initialization and then gets a 79:04 error.

    I heard it could be the firmware, print heads or defective material.  But I can't do anything with the printer, since it will never start completely.

    We had fixed a few months for a new belt and cleanup, it should be in pretty good shape.

    It's the best info I've found about this 79:04 error

    but again the solutions do not work if it does not start for me

    * Here is my new post with a solution for those who seek.

    http://h30499.www3.HP.com/T5/printers-Designjet-large-format/T1120-won-t-fully-boot-up-how-do-i-Trou...

    Hi @SlowWaves

    I suspect that your question it will be better answered in the HP Enterprise business community, like the HP Designjet T1120ps 24 inches printer is a business model.

    My technical expertise is with consumer products and software, I'm sure the sales people would be happy to help you if you re - ask your question for them to answer. The HP Enterprise business community is a Forum HP designed for commercial customers and business help each other. I'm sure you'll find some people here HP help also.

    Click here to see the printing and digital imaging.  When the page opens, you will see the option to "Log in" or "register now" on the right. Commercial forums are distinct from the advice of consumption, so you will need to register if you do not already have a trading account.

    You can find the HP Designjet T1120ps 24 - in printer support useful page while you wait for someone in the Trade Forum to meet your demand.

    Good luck.

  • How can I update the data in mysql using the button defined in the table?

    Hello

    right now I am doing my project for the online election system using dreamweaver cc14. I create a table using php code to bind the data to mysql, and in this painting, I create also a button "vote" for voters to vote. My question is, how can I update my polling data in the mysql database when voters push button "vote" based on the id of the candidates? Here is my code I try:

    <form method="post" id="form1">
      <?php
$servername = "localhost";
$username = "root";
$password = "pass";
$dbname = "ses";


// Create connection
$conn = new mysqli($servername, $username, $password, $dbname);
// Check connection
if ($conn->connect_error) {
     die("Connection failed: " . $conn->connect_error);
} 


$sql = "SELECT No, Calon, ID, Jurusan, Image FROM candidates";
$result = $conn->query($sql);


if ($result->num_rows > 0) {
     echo "<table >
  <tr>
  <th>NO</th>
  <th>Candidate</th>
  <th>INFO</th>
  <th>Vote</th>
  </tr>";
     // output data of each row
     while($row = $result->fetch_assoc()) {
         echo "<tr>
  <td>" . $row["No"]. "</td>
  <td><img src=" . $row['Image'] . "></td>
  <td><br/>-" . $row["Calon"]. " <br/>-" . $row["ID"]. " <br/>-" . $row["Jurusan"]. "<br/></td>
  <td><input type="."submit"." name=".$row["Calon"]." id=".$row["No"]. " value="."Vote"."></td>

  </tr>";
  if(isset($_POST["".$row['No'].""])){

  $vote_sachin = "UPDATE candidates SET Undi=Undi+1 WHERE No=".$row["No"]. "";

  $run_sachin = mysqli_query($conn, $vote_sachin);


}
    }
  echo "</table>";
} else {
     echo "0 results";
}






$conn->close();
?>




    </form>

    I hope someone can help me in this area, because I'm still new in this programming language.

    Thank you.

    Youre probably going to insert a 'radio button' next to the names of candidates and recover the database ID of that (I guess that the ID is the primary key in your database that uniquely identifies each record.

    His great confusion because you seem to update the database to aid WHERE no = "." $row ["no"]. so I don't know that ID is the primary key?

    IF "No" IS your master database key, you need to change the code below:

    TO:

    Here's the complete code based on the ID of your primary database key.

    <>

    $servername = "localhost";

    $username = 'root ';

    $password = "pass";

    $dbname = 'his ';

    Create the connection

    $conn = new mysqli ($dbname, $servername, $username, $password);

    Check the connection

    If {($conn-> connect_error)

    Die ("connection failed:".) $conn-> connect_error);

    }

    $sql = "SELECT No, Calon, ID, Jurusan, Image OF candidates";

    $result = $conn-> Query;

    If you click on the button "vote" form run the code to update the database below

    {if (isset($_POST['vote']))}

    Get the value of the ID of the radio button form field and store it in a table.

    $update_vote = $_POST ['candidate_id'];

    loop in the table and update the database

    foreach ($update_vote as $value) {}

    $vote_sachin = ' candidates UPDATE SET Undi = Undi + 1 WHERE ID = ".". " $value. » « ;"

    $run_sachin = mysqli_query ($conn, $vote_sachin);

    }

    }

    ?>

    <>

    If ($result-> num_rows > 0) {}

    ECHO '.

    ";

    each line output

    While ($row = {$result-> fetch_assoc())}

    ECHO '.

    ";

    }

    ECHO '.

    ";

    ECHO '.

    NO. Candidate INFO To the vote
    " . $row ["no"]. "
    -" . $row ["Calon"]. "
    -" . $row ['ID']. "
    -" . $row ["Jurusan"]. "
    ";

    } else {}

    echo "0 results."

    }

    $conn-> close();

    ?>

  • How to define an entity - TABLE TEMPORARY GLOBAL?

    In the logical design, is it possible to define the GLOBAL TEMPORARY table / entity?

    Thank you
    Prakash

    Hi Prakash,

    If you expand the node in the Navigator tree to your relational model, you will find a physical model node. If you develop it you will find an entry such as Oracle Database 11 g.
    (If there isn't one there, right-click on the physical model node and select new.)

    If you expand this node (you may first have to select open in the popup (right click menu), if the physical model is not already open), you should find a Tables entry, and under that, there should be an entry for your Table.
    If you double-click this entry (or select properties from the context menu), the property of physical model for the Table Editor will appear.
    The temporary property is up under the general tab.

    David

  • Using dbms_metadata for defination of large table

    Hello

    I have table definition table very large with partitions and partition under and I want to create this table in some other db.
    I have tried under request queued, but its definition to complete recovery of the table, other settings that I should follow

    coil t.sql
    set pagesize 0
    the 2000000 long value
    Select dbms_metadata.get_ddl

    I use oracle 10g r2

    Thank you
    Pankaj

    Mr. Paul wrote:

    Set longchunksize 2000000
    the 2000000 long value
    fixed lines 2000
    set pages 0

    Exaggerated!

    I decided to be generous this year!

    Happy new year, Nicolas.

    Best wishes to you, Paulo,

    Nicolas.

  • nQSError: 10058 incorrectly defined source logical table

    Hi all

    I'm trying to join two facts using a dimension. If I run the report with a dimension column & a fact it works. But when I run a report with 1 column in the first column done & 2nd of the second fact I get the below error.

    I don't know that this has something to do with the tab content in sources in MDB later.
    But can someone me what exactly I have to do.


    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 15018] Incorrectly defined logical table source (for the fact DWH_PA_MBR_PA_TMP_NEW table) contains no mapping for [DWH_PA_MBR_PA_TMPT_NEW. PERIOD_CODE]. (HY000)

    SQL issued: SELECT DWH_PA_MBR_PA_TMPT_NEW. PERIOD_CODE saw_0, DWH_PA_MBR_PA_TMP_NEW. CURRENCY_ID DWH ORDER BY saw_0 saw_1, saw_1

    Thank you
    Pankaj

    Create the hierarchy of the dimension.
    In LTS for two fact tables, set the lowest level of the dimension. (or other classes as the case may be).

  • Buttons previous as well as the next topic would work in a complete table of contents or only in a book?

    Hi all

    I have a project of webhelp with several books and browse sequences.  The previous buttons as well as the following topic seem to operate with a single book.  Is that how it is supposed to work?  And if so, is there a way to make it work for OCD together through all the books?  With the help of HR 2011.

    Thanks for any help.

    Diane

    Hello

    What you have to do is to create a large single sequence that runs through all of the topics in the table of contents. Exactly how do you this depends on your version of RoboHelp. For example, if you use the version 10 and earlier versions, choose the auto create option and enter 0 for the number of levels.

    If it is version 11 or 2015 Release, there is an interesting option provided.

    See you soon... Rick

  • How to define adf transient tables attribute val for all rows programmatically

    Hello
    I did drag the data control of database on the page and added a transient attribute Boolean visibleFlage (true / false). There is the button on which I want to put all the lines visibleFlage to true or false by programming. How iterate through the iterator in the table and set the attribute for all lines as a fake or a real one.

    Published by: 925410 on July 2, 2012 02:33

    Check this: http://docs.oracle.com/cd/E14571_01/web.1111/b31974/bcservices.htm#sm0203

  • script method to define a temporay table does not duration

    Hello world
    the method

    Public Sub oracle.dbtools.crest.model.design.storage.oracle.TableProxyOracle.setTemporary (java.lang.String)

    must agree that the parameter values '(PRESERVE ROWS) YES' and 'YES (DELETE ROWS)' to set a temporary session or transaction mode table.

    This doesn't seem to work, only the 'YES' parameter is accepted and sets the temporary table in session mode.

    Anyone with a different experience?

    Yours,

    user8632123

    Published by: user8632123 on June 14, 2011 04:36

    quick check which is stored in the xml file:

    NO
YES

    That's when the rows are deleted, so you have two properties to set a YES for 'temporary' and 'NO' to 'tempPreserveRows '.

    Philippe

  • reload page JSPX with ADF - complete tables

    Probably a stupid question, but how is it possible to reload and update page and all the data in the tables of adf by the button action.

    I want that PPR, recharge just fill.

    Hello

    Sorry for the late reply.

    I do not understand why you want the discount table because the data you commit all come from this page, so it should still be valid.

    But if you want to do that, just to bind a button to the execute method of the parent table.
    This forces the query to be rerun and all children should be refreshed automatically.

    In your just pagedef add the execute as an action method, the iterator must be that of the initial application and how to bind a button to this action.

    -Anton

  • Filter for table data, the range of data obtained and defined 2D

    I produce data of an ultrasonic sensor at 1 K Hz, and there is a lot of data (data points range of 0 to 10). However, in some cases when I know that the data should be about 7 (for example) I get outliers (about 9 and 10). Is it possible to define a filter for data in the defined range.

    I averaged the data to get an average value, and outliers are distorting. In the worst case, my outliers are 30 to 40% of the data generated. I created a filter to sort the data and, taken from the lowest value. I stop the loop when data reaches a value greater then 9. But this seems to take a long time (because the loop checks for each data point and there are 1000s of them).

    Is there a better way to filter data and define a predefined table range to collect?

    I enclose my filter.vi... and a set of samples of my previous data. The ranges of data of 10-8 and would like to have the range 7.5 to 8.5 to consider. The sensor records tension here and the problem can be solved by installing a different type of sensor, but if a filter in LabView can due it, the sensor that we use now is absolute.

    I am in kind of emergency, my design in unfinished because of this problem, if someone can find some time to share some suggestions, I will be grateful.

    Thanks in advance.

    See attachment.  I have incorporated the data you've posted in the vi.  It doesn't seem like any data were less than 8.7 or so, so I modified the scope so it would be a few points on average.  Some games were completely out of reach while the average came back like NaN (not a number) due to a division by zero.

  • How to initialize the typedef table without losing the typedef

    Hello

    I'm running problems with initialization of a typedef that contains an array of clusters. The attached example updates the Clusters and displays the new table.

    It works great but I would rather to pre-allocate memory the entire table.

    I came with indexing the typedef, using the element for initialization of table vi but with this approach I loose the typedef.

    Is there a good way to initialize the typef?

    Thank you

    Lukas


  • Source of the logical table incorrectly defined

    Hello

    I have the following physical layer joins:

    Projects_dim is linked to Budget_Versions_dim
    Awards_dim is linked to Budget_Versions_dim
    Budget_Vesions_dim is linked to Budget_lines_fact

    Projects, grants have Budget Version are dimension tables while the budget lines is the fact table.
    Projects and scholarships are also linked to other tables of facts.

    I've implemented a fact table in my BBM with all my tables of facts, between them as sources, there is the table of budget lines, and I also did mapping suitable for each of them does.

    The problem is, let's say the user, no matter what, wants to have a report that has fields of Project_dim, Awards_dim and Budget_version_dim, without going through any column is in there. In this case, I get the error: incorrectly defined source logical table.

    How can I solve this problem and get the report to return the budget versions by project and by the price?

    Thanks adavance...

    Hi Patrick,

    I have not recived you send, but in the meantime I have another solution for you problem, I modified the SPR, there is a fictitious table doing the join with all that a TI is used as column made implicit.

    See if it can help you!

    Kind regards
    Gianluca

  • ini_trans and max_trans is not displayed on the tables

    Hi Experts,

    When I'm shooting under query, it does not display ini_trans and max_trans. I know that there are some default values are defined by oracle for the latter.

    SQL > select table_name, ini_trans, max_trans dba_TABLES where table_name = 'MESSAGE';

    TABLE_NAME INI_TRANS MAX_TRANS
    ------------------------------ ---------- ----------
    Message

    The complete Table structure is as follows
    ========================

    CREATE TABLE "ORCL". "" MESSAGE.
    ('ID' NUMBER (20.0),)
    VARCHAR2 (128) "NAME."
    VARCHAR2 (256) 'CLASSNAME ',.
    VARCHAR2 (1000) "DESCRIPTION."
    'OWNER' NUMBER (10.0).
    VARCHAR2 (64) 'TYPE ',.
    VARCHAR2 (256) "STATE."
    'STATUS' VARCHAR2 (256),
    "CREATEDBY" VARCHAR2 (64).
    "DTTMCREATED" TIMESTAMP (3),
    VARCHAR2 (64) 'LASTUPDATEDBY. "
    "DTTMLASTUPDATED" TIMESTAMP (3),
    VARCHAR2 (64) "INUSEBY."
    NUMBER (20.0) "INUSEID."
    "INUSESINCE" TIMESTAMP (3),
    NUMBER (20.0) 'VERSION',
    NUMBER (20.0) OF 'REVISION ',.
    VARCHAR2 (32) "ARCHIVEDAY."
    VARCHAR2 (64) "APPLREF."
    VARCHAR2 (64) "APPLSTATUS."
    'PRIORITY' NUMBER (10.0).
    NUMBER (20.0) "FORM."
    "FORMNAME" VARCHAR2 (128).
    NUMBER (1.0) "PLEASE."
    'SERVICE' NUMBER (20.0).
    VARCHAR2 (128) "SERVICENAME."
    'STAGE' VARCHAR2 (64).
    NUMBER (10,0) "STAGEINDEX."
    NUMBER (1.0) "STAGEREVERSE."
    VARCHAR2 (256) "STAGECOMPLETE."
    VARCHAR2 (256) "STAGEREQUIRED."
    VARCHAR2 (256) "STAGENEWTRANSACTION."
    VARCHAR2 (256) "STAGESTP."
    "PRIORITYGROUP' VARCHAR2 (32),
    "INSTANCEID" NUMBER (10.0).
    "DTMC' TIMESTAMP (3),
    'MESSAGE_PK' CONSTRAINT PRIMARY KEY ('ID', 'ARCHIVEDAY')
    USING INDEX PCTFREE, INITRANS 10 2 MAXTRANS 255
    STORAGE)
    LOCAL DEFAULT USER_TABLES)
    (PARTITION "PART_FUTURE"
    PCTFREE, INITRANS 10 2 MAXTRANS 255
    STORAGE (INITIAL 131072 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
    TABLESPACE "STP_DATA."
    PARTITION "PART_DEFAULT."
    PCTFREE, INITRANS 10 2 MAXTRANS 255
    STORAGE (INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
    ENABLE TABLESPACE "STP_DATA")
    ) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
    STORAGE)
    DEFAULT USER_TABLES)
    TABLESPACE "STP_DATA".
    LIST PARTITION ("ARCHIVEDAY")
    (PARTITION 'PART_FUTURE' VALUES ('0'))
    PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
    STORAGE (INITIAL 2097152 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
    TABLESPACE "STP_DATA," NOCOMPRESS
    "PART_DEFAULT" PARTITION VALUES ("1", null)
    PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255
    STORAGE (INITIAL 458752 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645)
    PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 DEFAULT USER_TABLES)
    LINE ENABLE TABLESPACE "STP_DATA" NOCOMPRESS MOVEMENT)

    Could you please let me know why Oracle is not showing don't not its default values? Oracle version is 11.1.0.7.0

    It is a partitioned table. Check DBA_TAB_PARTITIONS. INI_TRANS and MAX_TRANS are defined in the partition/subpartition upin and if necessary.

    Thank you
    Joy

  • Table do not reset in the program between tracks

    Hello everyone, I am looking to write a program to assign physical channels pragmatically to a task for the acquisition of data that will be used to record data. In the sake of understanding, the program will be used to save the data of thermocouple and I would like the versatility with my VI. The goal is to get it rid DAQ assistants we currently use so there is no need to rewrite the channels in DAQ assistant, whenever they need to be changed (which is quite often).

    On the problem. The question I have, is that the table used to store the list of physical channels is no discount between the delivery of the program. This translates into an error of conflict channel names (just using the name of the physical channel as the channel name). My current guess as a way to fix this is to initialize the table at the beginning of the program. Problem with that is I need the physical channel DAQmx type table and I was not able to initialize an array like this. I have attached my VI below. Any help would be greatly appreciated and thanks in advance for any help you can give.

    Your shift on the loop register is unitilized which means that it will retain its value. You must explicitly initialize the shift register. You'd also better off auto build the table instead of using the Insert in the table.

Maybe you are looking for

  • Qosmio F30-133 is not working properly

    Good evening. I seriously need help with a problem with my qosmio F30.After that I have included, to produce:1. on the screen, there are thin white stripes. But he continues to be loaded.2. There is a Windows XP loading window.3. After this, the scre

  • Select start measurment only if the temperature is less than 26 ° C for 10 seconds

    Hello I have a program for a measure of viscosity/temperature use DasyLab 12 I burn my brain to try to activate the measurment only if the temperature is less than 26 ° C for 10 seconds. Click on 'Start', then control the temperature, if the temperat

  • Is it possible for me to reset my administrators password without having to buy or download anything?

    I can still access my administrator accounts.  I don't have access to another computer, or can I buy blank media (cd, floppy, flash drive)  I read on some "hidden administrator account", but the explanation I found was a little vague.  If anyone can

  • WiFi shows N and G, why?

    Why wireless n & g intermittently? Why offer the same exact hotspot WIFI G and other times my favorite N, which has a greater range?  Most of other hotspots is just G or only the N Protocol; two standards. Thank you very much in advance. Joe

  • Access controls and IP addresses

    Could someone clarify something for me, make access controls restrict access to a volume of only specified IP address or allow access to any IP address of a computer that includes the specified IP address... An example of what I mean... I have a volu