WiFi shows N and G, why?

Similar Questions

• Not connected to the Internet in with Airtel beetal 220 bxi modem with BSNL connection but wifi shows connected.

  I use windows XP and I use a modem wifi from Airtel (beetal 220 bxi) and I use BSNL connection, I set the BSNL dial the password for wifi definition so that only wifi must be connected automatically to access internet. Since a few days my internet worked fine, but after that it connects for a very short period of time say 10 minutes and then disconnected while wifi shows connected and when I ping IP address to the command run it shows that it is connected and part of the answer is displayed in the run window. My wifi shows connected, but I can't access the internet now a days showing also disconnected wifi and when I click on the wifi button, it shows "error loading plug in, application will exit" and when I click on this point, then all windows will be closed. To connect to the internet, I have again to restart the notebook and there still internet connect for 10 min and same situation happen again. Please help me solve this problem... I am so in troble now a days because of this problem. best regards: Ravindra

  Hello Ravindra,

  I suggest to look at this article on troubleshooting your internet connection in Windows XP:
  "How to troubleshoot possible causes of connection problems in Windows XP Internet.
  http://support.Microsoft.com/kb/314095

• now my restoration of the work system - properties - show two drives C: and D: WHY? I want to only show him C: _

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  Hi I noticed recently that now my restoration of the work system - properties - show two drives C: and D: WHY?  I want to only show C:

  He has never done this before and I don't want to show him D: at all, I have a HP and the D: drive is my restore disc, with D: listed means that he could get crushed and I don't want to appear in the recovery menu.

  How can I delete the D: drive on the recovery menu but the C: DRIVE ON leave...

  Thank you

  With all due respect, you are incorrect. You simply did not notice before D drive. D drive is a logical drive. To the best of my knowledge there is no way to prevent it from the show. However, simply disable the system for D drive restore.
  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• Actual size of RAM is 4 GB, but it shows 2.96 GB why usable?

  I installed Windows 7 Professional (32 bit OS) on my system and Pentium Dual Core processor.

  And the actual size of the RAM is 4 GB but it is show 2.96 GB why usable?

  In round numbers, XP, Vista and Windows 7 32-Bit Versions of the operating system can only address 4 GB. No matter how much you have installed 4 GB of memory is the maximum. The max your video card has xxx MB of ram on the card so that the limits of the operating system to 4 GB less cards xxx MO of memory.

  In addition any other material also removes an additional quantity of memory (usually a small compared to the video card)
  and the remaining memory (address space) is available for Windows XP, Vista or Windows 7 operating system and applications.

  As well as 4 GB thru 16 GB of ram you have installed or will install goes unused on a 32 bit OS. No matter that reports BIOS or what the OS is showing as installed memory, it is still limited to 4 GB address this barrier.

  A link to the white paper entitled "Gaming performance analysis" by Corsair
  Memory Inc. provides a good clear explanation of how a video card effects
  the amount of memory available on your PC.
  See: http://www.corsair.com/_appnotes/AN804_Gaming_Performance_Analysis.pdf

  Intel Chipset Support memory 4 GB system
  http://www.dcomputer.com/ProInfo/support/support/mainboard/4GB_Rev1/4GB_Rev1.PDF

  Users of Vista SP1 now report the amount of physical memory installed on your computer:
  See: Windows Vista SP1 includes installed reports and system memory (RAM):
  http://support.Microsoft.com/kb/946003

  RAM, virtual memory, pagefile and all that:
  Basic information about the implementation of virtual memory
  in 32 bit versions of Windows 2000, XP, 2003 Server etc..
  http://support.Microsoft.com/kb/555223

  J W Stuart: http://www.pagestart.com

• notification area icons change to "Show icon and notification. »

  For some reason, the "Windows Task Manager" notification icon continues to change its behavior.  I had put the behavior "Show icon and notification" to the Manager of the tasks, but when I right click on the taskbar and select "Start Task Manager", I get the up arrow icon icon rather than the Task Manager.  I go to the arrow and click on customize and change the behavior to return to "Show icon and notification.

  Is there a reason why it keeps changing to "display only notifications?

  Hi Artoo,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue, your computer task manager notification icon continues to change.

  I appreciate if you could answer a few questions:

  1. What is the brand and model of your computer?

  2 have the Windows Task Manager before notification work?

  3. the question has started recently?

  The task manager has two different views. For the display that includes menus and tabs, double-click the border of the Task Manager window. To return to the view without menus and tabs, double-click anywhere in the border around the tabs.

  I suggest you follow this Microsoft article below which will help you to solve the problems of Task Manager, under article is also applicable to Windows 7:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Task-Manager-problems

  You can also see this Microsoft article for more information:

  http://Windows.Microsoft.com/en-in/Windows7/change-how-icons-appear-in-the-notification-area

  Let us know the status of the issue.

• My smart-net-total-care portal does not show inventory and Segments see other admins

  My smart-net-total-care portal does not show inventory and Segments see the other admins.

  Our "Managing Director" has installed a collector who submits an inventory of our company on the Smart-Net-Total-Care Portal.

  When I log in to see the information of the collector (https://tools.cisco.com) I do not see the inventory collector, I can only see its "manually downloaded CSV stock."

  I got rights to see the data by this 'Managing Director' and I waited for the weekend for the website reflect this - but my opinion has not updated.

  How can I get the web portal to show all our accounts inventory of the collection?

  npicard,

  Thanks for your help so far.  I am a Director of a company on behalf of Mark.  I have over 7 days, deleted his role (not his association) and then reactivated it after waiting 48 hours.  Mark has been able to see the results of the present.  Once he was able to reconnect that he had the same problems with not being able to select the correct and most recent inventory.

  It's one of the reasons why, in another post I think you are familiar with, I asked Cisco to remove previous inventories to not exactly cause this type of confusion that we are trying to transfer this system to our operations department, whose brand is a key member.  Things do not go well.  Please let me know the status of the present and speed if possible.

• Printer hp deskjet k209a shows E and does not recognize the cartridge

  My printer k209a installed on windows 7 shows E and it can not display ink estimated even me, I uninstalled and reinstalled everything, this printer worked correctly the last time. It's very frustrating. I have travelled an answer anywhere and have done everything I could, he cannot help. My printer can scan, but may not copy or print. But I do not know why, when I pressed the button ON / OFF and the button cancel all, my printer can recognize the cartridge and show the estimated ink and showing also don't not E more... but only a few seconds after it prints the test print, then it becomes E again. Please help me.

  The troubleshooting steps described in this document may help to resolve the cartridge error.

• Fireworks navigation bar won't show 'down' and ' over all the way down ' States.

  So my Fireworks navigation bar won't show 'down' and ' over all the way down "says when I saw it.

  Heres javascript for navigation bar:

  < script type = "text/javascript" >

  <!--

  function MM_preloadImages() {//v3.0

  var d = document; If (d.images) {if(!d.MM_p) d.MM_p = new Array();

  var i, j is d.MM_p.length, a = MM_preloadImages.arguments; for (i = 0; i <.) Length; i ++)

  If (a [i].indexOf("#")! = 0) {d.MM_p [j] = new Image; d.MM_p [j ++] .src = a [i] ;}}

  }

  function MM_findObj (n, d) {//v4.01

  var p, i, x;  if(!d) d = document; If ((p = n.IndexOf ("?")) > 0 & & parent.frames.length) {}

  d = parent.frames [n.Substring(p+1)] .document; n = n.Substring (0, p) ;}

  If (!) () x = d [n]) & & copyrights) x = d.all [n]; for (i = 0;! x & & i < d.forms.length; i ++) x = d.forms [i] [n];

  for (i = 0;! x & & d.layers & & I < d.layers.length; i ++) x = MM_findObj (n, d.layers [i] .document);

  If (! x & & d.getElementById) x = d.getElementById (n); Return x;

  }

  function MM_nbGroup (event, grpName) {//v6.0

  var i, img, nbArr, args is MM_nbGroup.arguments;

  If (event == "init" & & args.length > 2) {}

  If ((img = MM_findObj(args[2]))! = null & &! img.) MM_init) {}

  IMG. MM_init = true; IMG. MM_up = args [3]; IMG. MM_dn = img.src;

  If ((nbArr = document[grpName]) == null) nbArr = document [grpName] = new Array();

  [nbArr.length] nbArr = img;

  for (I = 4; I < args.length - 1; i += 2) if ((img = MM_findObj (args [i]))! = null) {}

  If (! img.) IMG MM_up). MM_up = img.src;

  IMG.src = img. MM_dn = args [i + 1];

  [nbArr.length] nbArr = img;

  } }

  } Else if (event == "over") {}

  document. MM_nbOver is nbArr = new Array();.

  for (i = 1; I < args.length - 1; i += 3) if ((img = MM_findObj (args [i]))! = null) {}

  If (! img.) IMG MM_up). MM_up = img.src;

  IMG. SRC = (img. MM_dn & & args [i + 2])? args [i + 2]: ((args[i+1])? args [i + 1]: img.) MM_up);

  [nbArr.length] nbArr = img;

  }

  } Else if (event == 'out') {}

  for (i = 0; i < document.) MM_nbOver.length; i++) {

  IMG = document. MM_nbOver [i]; IMG. SRC = (img. MM_dn)? IMG. MM_dn: img. MM_up; }

  } Else if (event == 'down') {}

  nbArr = document [grpName];

  If (nbArr)

  for (i = 0; i < nbArr.length; i ++) {img = nbArr [i]; img.src = img. MM_up; IMG. MM_dn = 0; }

  document [grpName] is nbArr = new Array();.

  for (i = 2; I < args.length - 1; i += 2) if ((img = MM_findObj (args [i]))! = null) {}

  If (! img.) IMG MM_up). MM_up = img.src;

  IMG.src = img. MM_dn = (args [i + 1])? args [i + 1]: img. MM_up;

  [nbArr.length] nbArr = img;

  } }

  }

  ->

  < /script >

  And here is the code of navigation bar:

  < table border = "0" cellpadding = "0" cellspacing = "0" width = "196" >

  <!-fwtable fwsrc = "navbar.png" fwpage = "Page 1" fwbase = "Page 1.gif" fwstyle = "Dreamweaver" fwdocid = "182993200" fwnested = "0"->

  < b >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "196" height = "1" border = "0" id = "undefined_2" / > < table > "

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "1" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Index.html" onmouseout = "MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r1_c1','... / Kuvat, TESTINAVI, images, navbar_r1_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r1_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r1_c1','... / Kuvat/TESTINAVI/images/navbar_r1_ c1_f3.gif', 1);" > < img name = "navbar_r1_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r1_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r1_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Hevoset.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r2_c1','... / Kuvat, TESTINAVI, images, navbar_r2_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r2_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r2_c1','... / Kuvat/TESTINAVI/images/navbar_r2_ c1_f3.gif', 1);" > < img name = "navbar_r2_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r2_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r2_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Tunnit.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r3_c1','... / Kuvat, TESTINAVI, images, navbar_r3_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r3_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r3_c1','... / Kuvat/TESTINAVI/images/navbar_r3_ c1_f3.gif', 1);" > < img name = "navbar_r3_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r3_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r3_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Leirit.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r4_c1','... / Kuvat, TESTINAVI, images, navbar_r4_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r4_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r4_c1','... / Kuvat/TESTINAVI/images/navbar_r4_ c1_f3.gif', 1);" > < img name = "navbar_r4_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r4_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r4_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Hinnasto.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r5_c1','... / Kuvat, TESTINAVI, images, navbar_r5_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r5_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r5_c1','... / Kuvat/TESTINAVI/images/navbar_r5_ c1_f3.gif', 1);" > < img name = "navbar_r5_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r5_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r5_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Tayshoitopaikat.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r6_c1','... / Kuvat, TESTINAVI, images, navbar_r6_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r6_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r6_c1','... / Kuvat/TESTINAVI/images/navbar_r6_ c1_f3.gif', 1);" > < img name = "navbar_r6_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r6_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r6_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Kuvagalleria.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r7_c1','... / Kuvat, TESTINAVI, images, navbar_r7_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r7_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r7_c1','... / Kuvat/TESTINAVI/images/navbar_r7_ c1_f3.gif', 1);" > < img name = "navbar_r7_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r7_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r7_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Kisamenestys.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r8_c1','... / Kuvat, TESTINAVI, images, navbar_r8_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r8_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r8_c1','... / Kuvat/TESTINAVI/images/navbar_r8_ c1_f3.gif', 1);" > < img name = "navbar_r8_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r8_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r8_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Ajankohtaista.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r9_c1','... / Kuvat, TESTINAVI, images, navbar_r9_c1_f2.) " GIF ',', Kuvat/TESTINAVI/images/navbar_r9_c1_f4.gif',1); "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r9_c1','... / Kuvat/TESTINAVI/images/navbar_r9_ c1_f3.gif', 1);" > < img name = "navbar_r9_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r9_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r9_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < b >

  "" < td > < a href = ".. / Html/Yhteystiedot.html ' onmouseout ="MM_nbGroup ('out'); "onmouseover =" MM_nbGroup ('over', 'navbar_r10_c1','... / 2.gif Kuvat, TESTINAVI, image, navbar_r10_c1_f ',', Kuvat/TESTINAVI/images/navbar_r10_c1_f4.gif',1); " "" onclick = "MM_nbGroup ('down', 'navbar1', 'navbar_r10_c1','... / Kuvat/TESTINAVI/images/navbar_r1 0_c1_f3.gif', 1);" > < img name = "navbar_r10_c1" src =""... / Kuvat/TESTINAVI/images/navbar_r10_c1.gif "width ="196"height ="36"border ="0"id ="navbar_r10_c1"alt =" "/ > < / has > < table >

  "" < td > < img src = "... / Kuvat/TESTINAVI/images/spacer.gif" alt = "" name = "undefined_2" width = "1" height = "36" border = "0" id = "undefined_2" / > < table > "

  < /tr >

  < /table >

  I had a look at the files you sent me and tested in different browsers. I don't see a problem because mouseover and mouseout/mouseouthandler() events work as expected. The reason why all down and several events have not been programmed to. Remember that when a menu item is clicked on, it takes you to another page with a different menu and a different logic.

  If you want the item of menu appropriate to remain in an inactive state, you need to program for it.

  Why don't you use a menu ready fact as Spry system?

  GRAMPS.

  PS: Faceless and nameless moderators have removed some of my responses that made me decide that I can use my time better in other places. I won't answer any further.

• I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  I'm locked out of my iphone5 not connected to my wifi at home and my home button does not work, any ideas on how to fix?

  < re-titled by host >

  Take it to an Apple Store for repair or replacement.

• Disable WiFi on TC and used as a backup only

  I have a Time Capsule that I want to disable the functionality of WiFi Access Point and JUST keep the Capsule as the backup drive.

  I bought a new router that is not Apple Time Capsule, and I really don't want to have WiFi on the TC, and I want to be able to still use it to back up my data on my Mac Mini and Mac Book Pro. How to achieve this?

  Please notify.

  Thank you.

  You should be able to have the configuration of TC bridge (Network Tab... Choose the option above, router: Off (bridge mode).

  

  The TC is still available on the network.

  However Apple pointed out that it may be difficult if the computer is not directly connected to the TC in wireless or ethernet.

  My advice is to test as above... If you find after a day or two, the TC drop off the network, you will need to use a different approach.

  Either use the TC as a switch... If the iMac in particular can connect through it in ethernet... but if your Setup is wireless, it becomes complicated.

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  When my Macbook Pro is on the WiFi and my iPhone 6 s + is on cell phone, I noticed that if I delete the photos within the program of Photos on my Mac they do not get deleted from my iPhone. However, a few hours later when I get home and check my phone, and I'm on Wifi for both devices, the photos have disappeared. Do you need to be on the same account of WiFi for phone and Mac that allows you to delete photos?

  Thank you.

  Devices can be on different wifi networks.

  Your question is that the phone will not be synchronized using cellular data and will wait until it connects to a wifi network, but this can be any wifi network.

• I just pop up saying wifi is composed and it will be disabled for a min. Cause for concern?

  I just pop up saying wifi is composed and it will be disabled for a min. Cause for concern?

  Who is this message

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• Toshiba 40L5441DG - Led shows red and green light

  My Toshiba 40L5441DG were now waiting for 72hrs, and the Led is showing red and green lights.
  I just bought 3 weeks ago... I need help pls.

  If I understand you right when you try to turn on your TV on the LED is green, but there is no pic, right?