Definition of 2565 cable NI PXI / PCB definition Support

Similar Questions

• Management setting arbitrary and high-definition support

  Hey there,

  I use the AE/body development of custom filter SDK and I am facing the following problems:

  I created a user interface customized with highly customized slider settings, "Self-drawn", using parameters of arbitrary data to store their values. It's all works well - but seems to be incredibly heavy lifting for my machine. Handle the event drag in the UI custom, I check if the trail appears on the cursor, set the value of an arbParam and brand:

  params [ECW_UI_COLOR]-> uu.change_flags. = PF_ChangeFlag_CHANGED_VALUE;

  -> leading to a redefinition of the interface. Which seems to be really heavy tho seems to be the update of the arbitrary parameters, that I do not really understand.

  I also checked the implementation of example of a ColorGrid and observed a similar behavior, although not as bad because it doesn't have my crazy events drag. ;-)

  My first question is now:

  Y at - there no alternative for me to store and update data from temporary/session-like (as the real value of my custom cursor) otherwise than directly in arbParams? (then I could store only the last value of cursor on Mouse_Exit in arb for example..)

  ---

  I'm also using the DrawImage function in the SurfaceSuite and do not understand how the HIDPI AND RETINA DISPLAY SUPPORT should work.

  I use NewImageFromBuffer and DrawImage to load and position a png image on the surface - which works well - but don't understand the transformation function documentation reduce my image on the screens high resolution. My questions are:

  -What is const DRAWBOT_MatrixF32 * in_matrixP supposed to be / how it might be used and what are the value within the matrix for?

  -Documentation says that supporting HiDPI and Retina, screens you can use images off screen that are twice the size and then use the transformation function to scale the image down into the half before shooting it. How you would use the function of processing on the image when the transformation Gets the surface_ref?

  In my view, only a very simple example would save my life since I tried almost everything I could imagine...

  Help would be much appreciated and please excuse my probably bad explanation, I'm pretty new in this world after effects SDK. ;-)

  Thanks in advance and greetings in Hamburg, Germany!

  Marcel

  If someone else is facing problems in the future, at the point where I was able to solve both:

  performance on a custom user interface:

  Rather than use values of arbitrary parameters that I simply hi-jacked by default settings (= sliders) and hide them in the configuration of the filter - which seems to push highly performance and works like a charm.

  made image high definition:

  I finally understood how the transformation matrix must be applied:

  	char matrix_double [3] [3] = {{2.0F, 0, 0}, {2.0F, 0, 0}, {0,0, 2.0f}};
  	char matrix_half [3] [3] = {{0.5f, 0, 0}, {0.5f, 0, 0}, {0,0, 0.5f}};

  ERR (drawbot_suites.surface_suiteP-> Transform (surface_ref, reinterpret_cast(matrix_half)));

  ERR (drawbot_suites.surface_suiteP-> DrawImage (surface_ref, image_ref, & image_point, alpha));

  ERR (drawbot_suites.surface_suiteP-> Transform (surface_ref, reinterpret_cast(matrix_double)));

  Simply, it doubles the size of surface for the drawing of the image and it divides in half later the picture in high resolution on screens of the retina.

• The PXI-8512 does support the series 2 filter or a similar mechanism to filter the messages?

  Hello

  I need to buy a couple of cards CAN interfaces for my test application and I wonder what you choose

  I already used a PXI-8461 to obtain data of the customer model under test, and due to the fact that sometimes the client bus can be very busy, but most of the messages is not interesting for my system that I use currently series 2 comparator/mask/filter to filter only the interesting messages.

  Without this filter, the PXI-8461 often returns an error due to overloading of the bus. With the filter, everything works perfectly

  Now I need to implement several testbeds with this same feature, and I plan to move to the new PXI-8512 for new.

  My question is: is the most recent PXI-8512 a device series 2 institutions? Support the filter 2 series or any other mechanism to avoid problems on the busy bus?

  Thank you for your support.

  Kind regards

  Davide

  Hi Davide.

  the PXI-8512 isn't a series 2 device. The PXI-8512 is a device of the X-NET family. X-NET is the technology whose use OR in support of CAN, LIN and FlexRay with a driver API. Series 2 devices use the former NI-CAN driver that only supports the CAN. All of the new devices are devices X-NET.

  Take a look to the following document:

  NI-CAN for NOR-XNET application migration
  http://www.NI.com/white-paper/9717/en

  On this page you will find the following statement for the function that you are already using:

  Transceiver filters were traditionally indicated for applications where only a few CAN IDs have been considered on a bus high load. In some cases, material NI-CAN support the bandwidth of the full bus, which leads to a buffer overflow. The hardware architecture OR XNET uses the engine NOR-XNET DMA-driven to eliminate the occurrence of buffer overflows. CAN of NOR-XNET interfaces are able to handle high load bus and transmitting at the maximum rate without coupling to buffer overrun. If your applications use the hardware filters extensively, NOR recommend setting up CAN opposes, or by reading the bus while using Network Interface objects. The best option for these applications is to modify your code to use the API OR-XNET native.

  Best regards, Stephan

• PXI communication problem of NOR

  Hello

  I use the chassis NI PXI-1042 q with NI PXI-8196 embedded controller, I couldn't contact my NI PXI PCB (NI PXI-5124, NI PXI-4472 etc.)

  Currently, I installed NI LabVIEW 2010, NI MAX 4.3 and WINDOWS XP operating system

  Concerning

  Raj Kumar S

  Have you tried to go down and retrieve the PXI cards?

  Another tip:

  The NI PXI-8196 RT is a RT controller where you can download and run your application in real-time. In other words, you have to develop your application in a Windows operating system and download your app in 8196 via Ethernet.

  You should see your PXI as a big cRIO with PXI cards.

  You can double bot your PXI (Windows or RealTimeOS). This link might help you understand your hard specifications:

  http://www.NI.com/PDF/products/us/2005_5483_501_101.PDF

  ARO

  Vincent

• 1031 DC pxi star trigger

  Hello colleagues LV coders.

  I've looked everywhere and can't find the answer to the following question: How can I access a trigger in Star in a PXI 1031 DC chassis?  I know this must be through SLOT2.

  I currently have a micro controller PXI - 8102 SLOT1, an arbitrary generator (AWG) pxi-5422 the SLOT2 and a PXI-7954r FPGA with a digitizer 5761 nor in SLOT4.  I know that activitate the outbreak in Star, a "Timing and synchronization' card must be in the SLOT2.  Is it possible that I can use either the microntroller in SLOT1 or the Working Group in the SLOT2 for access to the relaxation of Star?  I think that the microcontroller will probably be able to reach, but what about the Working Group?

  Follow-up on issues is as follows: suppose that I am able to implement this Star trigger correctly, once the working group receives the signal to send its chirp 10usec by having the Star trigger go HIGH, is there a way of simultaneously to adjust the line of PFI0 HIGH in the Working Group and a time that the 10usec is completely sent to set the PFI0 on the BASS line in the generator of signals for usec then 90? This could be repeated indefinitely and the PFI0 line is used to control a switch via a cable.  In addition, this PFI0 of the GTS line will always be equal to "output mode".

  Thanks in advance a ton.  If I found the answer elsewhere, I'll make sure to update here.

  -Daniel

  The link "what GIS speeds. do my chassis PXI Trigger lines Support' really helped me to understand how triggers are connected in the bottom of the basket of the PXI chassis.  In my case, I need my shutter button to get to the e in 1 usec and thus the PXI Trig. Bus to get there.  No need to worry about the outbreak in Star for my application.  Thanks for the research!

  http://digital.NI.com/public.nsf/allkb/892204272FF2C0BE862575C500636AF6?OpenDocument

  -Daniel

• Many DAQ cards synchronize hardware for PXI

  I recently went through the process of getting several PCI DAQ cards in a computer and synchronize them together using a RTSI cable.  I just bought two similar cards in PXI.  I had to add a RTSI cable DAQmx devices manually in the measurement and automation software, and connect the cable with the PCI cards.  I want to just make sure that I don't have to do the same with the PXI cards because there is no necessary RTSI cable for PXI.

  Thanks for any help,

  Mike

  The PXI chassis has backplane triggering and clock lines so that you don't need the RTSI cable.

• Incompatibility of pilot PXI 5105 and unable to be detected by OR-SCOPE FPS with NO-SCOPE installed 14.1

  I am setting up test bench and just add a PXI-5105 card to my chassis SMU-1078.

  I currently have NO-SCOPE 14.1 installed on my PC host and target RT.

  When I try to run the Test panels in MAX, I get the following error:

  

  If I try to launch SFP-OR-Scope, it does not detect the card of the scope:

  

  The map seems to indicate as normal in my remote systems in MAX.

  For the host, the Installation of NOR-SCOPE includes:

  • Configuration support 14.1
  • 14.1 development support
  • 14.1.1 duration

  For the target RT, Installation of range OR watch as 14.1.0.

  I even checked in the feature add/software for the remote system see if a driver incompatibility was actually present:

  

  I have also confirmed in the Readme that PXI-5105 is supported OR-SCOPE 14.1.

  I'm kind of dead in the water on other ideas to investigate on concerning the system is behaving properly with the new card.  Other ways suggested for study?

  I continued to play with setting up more and find my VI has been targeted my Windows host instead of the goal of the RT.  I'm nowable to see my map of scope 5105 now through Labview + RTM.  Thank you for tolerating a newbie.

• Error-201427 on PXI-5122 since NI MAX system

  I need to check that the PXI-5122 is supported by NO-Scope 4.0.0 under WINdows 7 64-bit. If so, I guess I can get a damaged card. The system was running under the old computer / code / drivers last month.

  Scenario is this: I'm upgrading of already running code to a new computer and 32-bit 64-bit CVI CVI. After plowing, of code tweaks, PXI, 5122 digitizer shows through a new error in the code. I go back NI Max and I get this related error when I try to post.

  "The driver could not communicate with PXISlot2, generates the following message:

  Error-201427 to the autotest

  Possible reasons:

  The specified device is not supported in the API OR-DAQmx.

  Specified device PXISlot2.

  Seeing this, I have tried NOR updated, and nothing has been marked. I shut down the system and reseat the card. Then I checked the version of NOR-Scope (was 3.9.4) OR MAX I downloaded manually OR-Scope 4.0.0. Same mistake.

  The 5122 is in slot 2 and NI MAX identifies the card as "2: NOR-PXI-5122"PXISlot2"

  More information on the current system

  Dell Precision T3600

  Win7 64 bit Enterprise SP1

  Spincore NMR TIming Pulsebalster PCI card

  PCIe copper x 4 remote link to the chassis OR 1062 q

  In the NI 1062 q

  Slot 1: NI SMU-8370 remote control

  Slot 2: OR PXI-5122

  SLOT3: NOR SMU-5442

  Slot 4: reports of empty in fact NEITHER SMU-8262 linked to a NI PCIe-8263 (shows in Windows, normal visibility NI Max is unknown)

  Slot 5: OR PXI-6733

  Slot 6: OR PXI-6733

  Slot 7: vacuum

  Slot8: OR PXI-5421

  Measurement and Automation Explorer System Information (current after upgrade NI-Scope) is attached

  Before I track down a loan 5122, I wanted to see if there are known incompatibilities that come to mind.

  Thanks in advance.

  There is a material-200313 error on the map (and the first replacement) as revealed by an earlier version of NIMAX (another computer and PXI chassis). The information contained in the attached document can help improve diagnosis in the future (rather than the more highest credits of the error).

  With a third scanner system is running.

• AI PXI-6255 sampling frequency

  Hello

  We use a simulated PXI-6255 device and with the LabVIEW example, apparently, that we can achieve a sampling rate of 20 kHz to 50 channels without warnings or errors.

  The spec is the number max of 20 kHz channels must be approximately 38 channels (750000 / 20000).

  
  
  
  
  
  
  
  

  1.25 single channel of MECH. / s multi-channel of 750 ksps / s (aggregation)

  The simulation cannot not representative of the unit or the real PXI-6255 does support a higher rate that we expect?

  Hi jharris66,

  It is not a limitation of the driver to the sampling frequency, so a simulated device reports any error in this case.

  In this example, I think that the limit of 750 kHz comes to the multiplexer.  I don't expect to see the same error messages with the real device, but your accuracy will probably not to spec because not allowing enough time settling between the channels.

  The limit of 1.25 MHz is the maximum ADC sampling frequency.  You can probably exceed this number somewhat, but once you go too far beyond 1.25 MHz you will eventually receive a synchronization from the hardware error when the ADC cannot follow.

  Thus, the specification is still technically 750 kHz for channels multiple acquisitions.  You can probably run at a higher rate than this (even on real hardware), but I wouldn't say that it is supported.

  Best regards

• made 2311gt HP (QJ684AA) support HDMI 1. 4 a cable?

  I'll buy a HP 2311gt 3D monitor, but I don't know if it supports HDMI 1. 4A cable. because I discovered that need 3D content cable HDMI 1. 4A for image quality of dough or it doesn't mean anything if it 1. 3B or 1. 4A, all cables are the same. As far as I know my Nvidia GTX 660ti are 3D one supported it compatable with HDMI 1. 4A.

  In theory, you will need a minimum of cable HDMI v1.4 to support 3D content. If you get a v1.4a or v1.4b cable you should not have problems. I suggest to get a v1.4b cable because it is the most recent version and supports most of the formats.

  Please send Bravo

• Qosmio G30-102 Optical SPDIF not working not

  I bought the new Qosmio G30-102 and I'm sure that the connector SPDIF optical Out does not work.

  I can't test it now, but I had a couple of SPDIF sound cards and each of them had a red light on all the time, who reported that Optical SPDIF is supported.

  The Qosmio g30-102 definitely supports the audio line in Jack S/PDIF. It s a headphone
  You simply use the right cable!

• AirPlay does not not on sierra

  I have just updated my 13 macbook air inches to sierra, to the vind on this antenna does ' t mirroring works more.

  I get only audio but no visual. I have no idea how to solve this problem.

  It does not work with my iphone with ios 10 6.

  the apple tv is the second generation and works on the latest version of the software.

  can someone help me with this problem?

  Hey franky-b,.

  I understand that after updating macOS Sierra, you are able to get audio but no video when using mirroring AirPlay. I know it's nice to be able to see your desktop on your TV wireless, so I'm happy to help you.

  First of all, make sure that your devices meet the requirements of airtime:
  

  Required to use AirPlay

  If you go to the Apple menu > System Preferences, click on monitors and do not see the option to "See the mirroring of the options in the menu bar when it is available," your Mac does not meet these requirements.

  Minimum requirements if your Mac and Apple TV are on the same network:

  • Apple TV (2nd generation or later) with the latest version of the Apple TV software
  • For mirroring of your screen to display your desktop, one of the following computers Mac with OS X Lion mountains v10.8 or later version:
    • iMac (mid 2011 or later)
    • Mac mini (mid-2011 or later)
    • MacBook (early 2015 or later)
    • MacBook Air (mid-2011 or later)
    • MacBook Pro (Early 2011 or later)
    • Mac Pro (end of 2013 or later)

  Minimum requirements for peer-to-peer AirPlay, which allows visitors to quickly and easily connect their Mac or an iOS device to your Apple TV without getting the passwords and connection to the network Wi - Fi:

  • Apple TV (3rd generation Rev A, model A1469 or later version) with the latest version of the Apple TV software
  • Mac with OS X Yosemite v10.10 or later version (2012 or later)

  This information is in this article, which contains also some troubleshooting, you should check for this issue:

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

  Thank you for using communities Support from Apple. See you soon!

• Apple TV connection Mac Pro (2009)

  I have a Mac Pro (2009).

  I wish I could watch pictures and videos on my TV via Apple TV.

  Is there a way to do this?

  What equipment or programs do I need?

  I can connect and watch YouTube on my iPhone through Apple TV.

  Is there a way I can make it through my Mac Pro?

  No, the Mac pros, only the 2013 Mac Pro supports mirroring to an Apple TV.

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

• MacBook screen on Apple TV

  Hello

  I'm trying to put my Macbook Pro screen on my HD TV via my Apple TV box 4th generation. My Macbook Pro is a Mid 2010 and runs the latest version of the software and the update.

  I searched Apple's site and I do not know I followed what he say. I have not in my menu bar option of airtime.

  Has anyone had this problem and found a solution.

  Thanks in advance

  Carl

  Are you sure that your MacBook Pro meets the requirements of the Airplay? It seems that they are not...

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

• How to activate AirPlay to connect to ATV - 3?

  How to activate AirPlay to connect to ATV - 3?  I have a MBPR (early 2011) updated to El Captain running.  AirPlay is disabled "" in the views, no icon in the Menu bar.   I have ATV-3(latest update) reflecting the iPhone 4 and iPad, but not given up by MBPR.  I have disabled firewall, deleted all the startup items and reboot, etc.  Nothing helps...  MIL gracias.

  Hi Mepurvis1,

  I understand that you have trouble connecting to your Apple TV using AirPlay on your MacBook Pro. I know it's nice to get your content to the big screen, so I'm happy to provide advice to help with this.

  See the resources in the present statutes for some troubleshooting tips and to make sure that everything is compatible:

  To view a video from your Mac to a TV high definition - Support Apple AirPlay

  OS X El Capitan: use AirPlay to see your desktop on a HDTV

  Thank you for using communities of Apple Support, cheers!