Defragment.exe when running in the background with the scheduling of the task, it wil give me a sign that it has fulfilled the task

Similar Questions

• It is normal to dllhost.exe 3 running at the same time?

  I found 3 clocked dllhost.exe to thhe same time in windows 7 Professional is that normal or I have a virus?

  Hello

  I wish to inform you that it is possible that the number of instances of dllhost.exe is running at the same time.

  Dllhost.exe is the Windows DCOM DLL host process. It executes the DLL COM + and control processes in Internet Information Services (IIS). As such, is used by many different applications, including Visual Basic and .NET applications.

  However, there are a lot of viruses under the same name and could easily infect a computer. Let us perform a full scan using Microsoft Safety Scanner mode without failure.

  Download Microsoft Safety Scanner, start the computer using safe mode and run a full scan.

  Safe mode is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started.

  Follow the link below to learn how to do it.
  http://Windows.Microsoft.com/is-is/Windows7/start-your-computer-in-safe-mode

  Run a virus scan complete and check if the problem is resolved.

  The Microsoft Security Scanner is a security tool free to download that allows demand analyses and helps remove viruses, spyware and other malicious software. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

   

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

   

  Warning: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please get back to us with the State of the question.

• InDesign extension is not displayed when run via the option "Debug as".

  InDesign extension is not displayed when run via the option "Debug as".

  Hi all

  I worked on an application InDesign Extension for a few months now. I am Member creative cloud. I FlashBuilder 4.6 + Extension Builder 2.1 (both licensed versions) and InDesign CS6 and CC installed on my machine. The application is targeted for InDesign CS 5.x and 6 CS and CC versions. So far, I've tested it via "run as" and "Debug as" options of the FB; and in time, I "export as" ZXP for internal versions.

  I'm having two problems, do not know if they are related.

  1. when I try to bundle manifest, it fails with the following error: (at first, I thought it was an installation problem, but I did another test project and bundle manifest works on that one)

  Could not open the Editor: an unexpected exception was thrown.

  Details:

  java.lang.NullPointerException

  at com.adobe.cside.ui.editors.pages.MainBundlePage.isPointProductSupported (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createTargetAppSection (unknown Source)

  at com.adobe.cside.ui.editors.pages.MainBundlePage.createFormContent (unknown Source)

  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)

  at org.eclipse.ui.forms.editor.FormEditor.pageChange(FormEditor.java:471)

  at com.adobe.cside.ui.editors.BundleManifestEditor.pageChange (unknown Source)

  at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:1067)

  at org.eclipse.ui.forms.editor.FormEditor.setActivePage(FormEditor.java:603)

  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:352)

  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)

  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)

  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)

  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)

  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)

  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)

  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)

  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)

  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2756)

  at com.adobe.cside.ui.popup.actions.CSIDEBundleEditorAction.run (unknown Source)

  at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251)

  at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection (ActionContributionI tem.java:584)

  to org.eclipse.jface.action.ActionContributionItem.access$ 2 (ActionContributionItem.java:501)

  to org.eclipse.jface.action.ActionContributionItem$ 5.handleEvent (ActionContributionItem.java:411)

  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)

  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)

  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)

  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)

  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)

  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)

  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2696)

  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2660)

  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2494)

  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:674)

  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)

  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:667)

  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)

  at com.adobe.flexbuilder.standalone.FlashBuilderApplication.start (FlashBuilderApplication.ja goes: 108)

  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication (EclipseAppLau ncher.java:110)

  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start (EclipseAppLauncher.jav one: 79)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)

  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

  at java.lang.reflect.Method.invoke(Method.java:597)

  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)

  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)

  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  Here is my manifest file:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < ExtensionManifest Version = "2.0" ExtensionBundleId = "ConnectXPress".

  " ExtensionBundleVersion ="1.0.0"xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance ">

  < author >

  <! [CDATA [Swati Sisodia]] >

  < / author >

  < ExtensionList >

  < extension Id = "com.pubpress.CXP.extension1" Version = "1.0" / > "

  < / ExtensionList >

  < ExecutionEnvironment >

  < parameter Listehotes >

  < host name = "IDSN" Version = "7.0" / >

  < host name = "Clement POUPARD" Version = "7.0" / >

  < / parameter Listehotes >

  < LocaleList >

  < Locale code = 'All' / >

  < / LocaleList >

  < RequiredRuntimeList >

  < RequiredRuntime Name = "CSXS" Version = "2.0" / >

  < / RequiredRuntimeList >

  < / ExecutionEnvironment >

  < DispatchInfoList >

  < Id = "com.pubpress.CXP.extension1 extension" >

  < DispatchInfo >

  < resources >

  < SwfPath >./ConnectXPress.swf < / SwfPath >

  < / resource >

  life cycle of the <>

  < AutoVisible > true < / AutoVisible >

  < / life cycle >

  < UI >

  Panel < type > < / Type >

  ConnectXPress < menu > < / Menu >

  < geometry >

  < size >

  < height > 520 < / height >

  < width > 350 < / width >

  < / size >

  < / geometry >

  < icons >

  < Type icon = 'Normal' >./icons/normal_icon.png < / icon >

  < Type icon = "RollOver" >./icons/rollover_icon.png < / icon >

  < Type icon = "Disabled" >./icons/disabled_icon.png < / icon >

  < Type icon = "DarkNormal" >./icons/dark_icon.png < / icon >

  < Type icon = "DarkRollOver" >./icons/dark_icon.png < / icon >

  < / icons >

  < /UI >

  < / DispatchInfo >

  < / extension >

  < / DispatchInfoList >

  < / ExtensionManifest >

  2. my other problem is, I recently changed the name of the project and the name of the application in the Menu, and since I did that, my extension is not displayed when I perform "run as" or "Debug as" Flash Builder. To enforce as / debug as, the code compiles and appears in the folder "bin-debug", the application is triggered, but when I navigate to Windows > Extensions, my extension is not present here. Although when I export as ZXP and install via Extension Manager CS 6 or CC, it shows my last extension in Windows > Extensions with the correct name.

  Any help is very appreciated. Please let me know if I need to provide more information.

  Kind regards

  Swati.

  I've solved both of my problems. And I thought I'll post for others.

  First problem, where the manifest failed Bundle of FlashBuilder, was resolved by a change in the manifest.xml (who lives at /.staged-extension/CSXS). The change I made was tag. Earlier it was (generated by FlashBuilder 4.5):

  I changed it to:

  I did a bit of hit and trial and it seems that FlashBuilder generated 4.5 tag host with the Version with only the specialties of the minimum version while FlashBuilder 4.6 requires that all versions of specialties listed in the Version attribute.

  The second problem of debug/run as not to install the extension properly in InDesign, has been set as a result of the software update of FlashBuilder.

  This is what brought me to do:

  I retraced my steps and realized last thing I did before the "Debug as Adobe InDesign Extension" of in FlashBuilder broke on my machine has been updated InDesign CS6 to the latest available version, which probably ended up with flash/flex versions of InDesign and FlashBuilder. Therefore, perform a fixed update debugging.

• Code to change the password when running in the world of form

  Hi all
  
  Have someone to help me how to set the code change password when running at the global scale of a form?
  
  
  Arif

  the easiest way, try something like this.

  forms_ddl('alter user '|| v_user || ' identified by '|| :block.item );
  if form_success then message('password changed');
  else
  message('password not changed please try again');
  

  Sarah

• How to check if a shutdown.exe command runs in the background?

  Hi all

  I recently did a nice, small and useful for my pc application plan a stop. (using c# in visual studio 2012)
  I used the shutdown.exe command (with he different tags for different uses).
  What I can't find, and I have looked throughout the web and the msdn help files, is a script to run to see if such a command is already running in the background.
  Is it possible that this command didn't exist and we are condemned to use tag - one each time and then restart the command to know that, indeed, the computer has a planned shutdown?
  If the control option it does not exist, how can I call it?
  Thank you
  Maor

  Hello

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Explorer Windows doesn't do not work when left clicked in the taskbar. Explorer.exe is running in the Manager of tasks for only a few seconds then cuts.

  I have a problem with the Windows Explorer. When I left click on the taskbar Task Manager indicates that explorer.exe is running, but deletes then after a few seconds. I can right-click in windows Explorer and select any file frequent or pinned and who opens, okay, right click in windows explore does not work. I clicked the windows Explorer and checked the properties that appear to be identical to my second PC that is also running windows 7 and works very well. I also open the location of the files and tried to launch explorer.exe in c:\windows which gives the same result. Can someone help me please.

  Hello
  Welcome to the Microsoft answers forum.
   
  I suggest you perform the clean boot.

  To perform a clean boot on a computer that is running Windows Vista, follow these steps:

  1. click on start, type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  When you are prompted, click on restart.
  After the computer starts, start the program or game and see if the problem is resolved.
   http://support.Microsoft.com/kb/331796

  You can also perform a full scan of your computer, please visit this link:

  http://OneCare.live.com/site/en-us/default.htm

  You can also try running sfc scan, follow these steps:

  1. open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. type the following command and press ENTER:
  sfc/scannow

  The sfc/scannow command. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions
     http://support.Microsoft.com/kb/254649

  You can also check in safe mode, please visit this link:

  http://windowshelp.Microsoft.com/Windows/en-us/help/d063548a-3fc9-4723-99f3-b12a0c4354a81033.mspx

  Thank you and best regards,
  Azam - Microsoft Support

• Activity monitor close unexpectedly when running in the background on the left

  Recently upgraded to Mac OS Sierra and Activity Monitor to close unexpectedly when running back plan left (do not smoke and open the activity monitor window) to a blank desktop when you use an application in another office. Clean install I tried but the activity monitor would still be down at random times when left running in the background to another empty office. Someone at - there experience this problem? For most browsing on the web using Safari on another desktop computer when Activity Monitor quit unexpectedly.

  Activity monitor also using a lot of energy since the upgrade?

  Any help would be appreciated. Thank you.

  Model: MacBook Pro (retina, 13 inches, early 2015)

  OS: macOS Sierra: 10.12 (installed via the upgrade, own installed after this problem).

  Do not forget that you are using the activity monitor version which was installed when you upgraded to Sierra. Activity monitor located in the your Mac utilities folder.

  If you have moved a previous version to a different location, it will not work.

  If you are using the correct version, post crash report. Error reports lies in the application of the Console under System reports or reports from usersand end in the suffix .crash. If you choose to do so, omit or hide any information that you consider personal.

• Defragment the computer freezes, chkdsk has revealed no error. Manual operation of defrag.exe help as meeting the same gel administrator command prompt

  Hi all

  Bit of a strange problem with Windows 7. I can't get defrag to work on any level. Running manually using a system Accessories/tools works for about 20 minutes before the computer hangs completely and requires that the start/stop button to press. I have run chkdsk and supposedly there are no errors on the hard drive.

  I tried running as admin - c:/c defrag.exe command-line prompt and several variations of it, but all have problems about 20 minutes in the defragmentation. Also tried in safe mode.

  The strange thing is that the computer does not display instabilities during normal operation. My tuneup software has identified that the hard drive is very fragmented. I do not think that the third-party software it will solve as Tuneup has a command defragment and which freezes some 20 minutes after the start.

  Any recommendations?

  What tune up software?

  Its likely that dubious Tune Up software is the cause of system problems

• mxmlc - fails immediately when run at the command prompt

  Yes, I'm under flex 2 with java 1.6.
  I am able to write and run applications using the Flex Builder 2 IDE without problem.
  Wanted to compile the style sheet to use when running.
  He worked through the setting without problem.
  
  When I run mxmlc from the command prompt, Windows prompts with 'JAR Launcher has encountered a problem and needs to close. We are sorry for the inconvenience. »
  
  I launched the debugger VS, where I was able to get the violation, an unhandled 0x5c62696c in mxmlc.exe exception: 0xC0000005: reading location 0x5c62696c access violation.
  
  No idea or help is appreciated.

  My user error. Just removed all the following settings. It was a config problem.

• several times current Svchost.exe to run in the Task Manager

  WHY IS SVCHOST. EXE RUNNUNG 14 TIMES, taskmanager?

  What is csrss.exe?  An internet search says it's a Trojan horse.

  One last question, "Windows has blocked some startup programs" why the other box that would appear on startup?

  Original title: svchost.exe

  Hello

  1 did you changes to the computer before the show?

  2. What is the full error message that you receive during the start up?
  3. What is the version of Windows you are using?

  Svchost.exe is a process on the computer that hosts, or contains, other individual services that Windows uses to perform various functions. For example, Windows Defender uses a service that is hosted by a svchost.exe process.
  See this link:

  • What is svchost.exe?

    http://Windows.Microsoft.com/en-CA/Windows7/what-is-Svchost-exe

    Csrss.exe is running client/server subsystem and a necessary Windows process.

  Because the computer is not correctly behaving as expected, I suggest you run a virus scan to verify the infection.

  Method 1:
  

  Run a scan antivirus on your computer.
  www.Microsoft.com/Security/Scanner
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
  Method 2:
  
  If you are using Windows vista or 7, I suggest you consult the document below and follow the steps.
  Error message when you start a Windows Vista-based computer: "Windows has blocked some startup programs".
  http://support.Microsoft.com/kb/930367
  This document also applies to Windows7.

  I hope this helps.

• Is it normal to find errors when running Check Disk manually with Vista?

  For some time my computer would not start without automatically run the disk check. It now starts and works well, but Check Disk find errors every time I have manually run the disk check. Is it normal to find some cluster errors when you run Check Disk? It runs today, he finds and replaced two bad clusters. Two is not much, but I ran as a few days ago. Thanks for any information, that everyone has.

  It would be wise now to test the hard drive. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

• What is nvvsvc.exe process running in the Task Manager?

  Hello - What is this nvvsvc.exe (v v w no) running in the Task Manager? Eatting a lot of memory, don't let me put an end to the process, won't tell me where it is located, (I opened to display all files and folders), I can't locate with search, I can't find it in: / c in System 32 files or 64. I ran WSE thinking it could be malware or a virus and came back clean. Am running Windows7 HP 64-bit sp1, IE8, WSE for protection. All updates are up to date with windows and WSE today. UT

  You have an nVidia graphics card? If so, the Sub page explains nvvsvc.exe:

  nvvsvc.exe to ProcessLibrary.com
  http://www.ProcessLibrary.com/directory/files/nvvsvc/433585/

  I hope this helps.

• AddChild() does not load swf external when run in the browser

  I created a few fairly simple flash animations, but overall is based on unloaing, then loading swf files outside them.

  The base file works fine, load external references and the discharge (even if I do need to preven the user hitting the Unload button when there is nothing to unload) and will then another good, IF I run it directly from my file system.

  I want it to be on a web page, but when you click the button to load external files, nothing happens.  Safari tells me it can't find the file, and I use the same exact directory to test.

  So does work very well during the test with flash (CS4) and runs directly from the directory in the finder, but a web page, it cannot find the file.

  Any suggestions on why this is happening and what I can do about it?  It has left me speechless.

  Eric Gray

  Is the html page in the same folder as the swf file?

• Digest the lag when running during the generation of the ant script

  I'm tying all libraries referenced by my Flex as RSL project. When I do this through Flex Builder seems to work.  When I try to do it via an Ant build script to the mxmlc task the build succeeds (everything compiles) but when running, I get error #1001 Flex: mismatch with RSL Digest for datavisualization.swc.  Not sure why I make this especially since I specify datavisualization.swf in the rsl url not a swz file. Both methods give the same set of swf, SWC, and swz files in the deployment folder.  I can't understand what is different between the two build processes after comparing the .actionScriptProperties with the ant script.  Can anyone help to shed light on this or help me understand how push wrong with that? Thank you.

  My task as mxmlx:

  < mxmlc
  file = "${Flex.main.file}" "
  output = "${Flex.output.swf}" "
  ActionScript-file-encoding = 'UTF-8 '.
  Keep-generated-actionscript = "false".
  link-TIME-shared-library static = "false".
  local = "en_US."
  MaxMemory = "256 m" >
  
  < path-element source-path = "${PROJECT_FRAMEWORKS}" / >
  
  < dir external-library-path = "${PROJECT_FRAMEWORKS} / libs/player" includes = "playerglobal.swc" / >

  "< path-element="${PROJECT_FRAMEWORKS}/libs/framework.swc DURATION-shared-library-path ">

  < url rsl - url = ' framework_$ {FLEX_BUILD} .swf ".
  < url rsl - url = ' framework_$ {FLEX_BUILD} .swz "/ >
  < / DURATION-shared-library-path >
  
  "< path-element="${PROJECT_FRAMEWORKS}/libs/rpc.swc DURATION-shared-library-path ">
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swf" / >
  < url rsl - url = "rpc_$ {FLEX_BUILD} .swz" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Automation.swc" >
  < url rsl - url = "automation.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_agent.swc" >
  < url rsl - url = "automation_agent.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_dmv.swc" >
  < url rsl - url = "automation_dmv.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/automation_flashflexkit.swc" >
  < url rsl - url = "automation_flashflexkit.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/DataVisualization.swc" >
  < url rsl - url = "datavisualization.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Flex.swc" >
  < url rsl - url = "flex.swf" / >
  < / DURATION-shared-library-path >

  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/qtp.swc" >
  < url rsl - url = "qtp.swf" / >
  < / DURATION-shared-library-path >
  
  < runtime-shared-library-path
  Path-Element="${PROJECT_FRAMEWORKS}/libs/Utilities.swc" >
  < url rsl - url = "utilities.swf" / >
  < / DURATION-shared-library-path >
  
  < compile .library-path dir = "${PROJECT_FRAMEWORKS}" / locale ' append = "true" > "
  < name = "{local}" / >
  < / compile .library-path >
  
  ...
  
  < default width = "500" height = "600" / >
  < / mxmlc >

  I didn't write the patch, but I just took a quick glance. I think that the "url" element has been renamed to "rsl - url" and new elements have been added as "failover-url". You can try to match this new syntax, but I don't think that this patch will be agreed due to rename it.

  -Darrell

• problem when running on the device...

  Hey everybody,

  I recently finished writing an application, and I installed it on Bold 9700 device. It works very well. However, as the

  I navigate through the screens through buttons, a menu list opens for each screen. Its boring as each screen appears with a list of the menu.

  Is there a way to prevent this arise?

  http://supportforums.BlackBerry.com/T5/Java-development/openes-menu-item-when-clicked-on-the-button/...

  Show this message to check if this is the same problem.