Defying death, keeping alive via USB

Similar Questions

• Play music while connected via USB?

  Is it possible to play music while connected via USB?

  It would be very useful for those of us who listen to music all day at work.

  Workaround/hax solutions will be appreciated.

  Hello britoso and welcome to the forum.

  The Clip cannot read music when it is connected and communicates with a computer USB port. If you want to keep the battery from flowing and still be able to listen to music, you will need to get a USB charger or try one of the methods described in these discussions:

  • Listen to your music while loading using PC
  • Player unit then only plugged into usb port

• Windows 7 will not recognize or sync Pocket PC which is connected via usb

  Hello

  I am trying to sync my Pocket PC data (Pal my ASUS a686) on my computer (Windows 7 Enterprise). I think that if you had Windows XP, we would use Active Sync. However, it's windows 7, so I think that I use Windows Mobile Device Center. In fact, I used the center of the device before, but it has been a week to try to download the data again and it no longer works. He is very picky. But we need our data and cannot wait for the day that he decided to download.
  So I uninstalled the center of the device (the tip of a chat room) and now I can not re - load it. However, before I even uninstalled, the problem returning to the top, it was my computer does not recognize the device connected via usb.
  Code 43 continues to come does not recognize this device. And yet it is plugged. I keep trying to restart, plug the unit in different orders, send good energy, etc.
  I did a soft reboot of the pocket pc the last time, but that makes you lose all data on the pocket pc and we cannot lose this data. Finally, it is for the eco-counter software. When it worked, I hit the sync button and the data were downloaded. Now... He says just connect me please my pocket pc when it is connected. Why!
  Thank you
  Cole

  On the Pocket PC, try going to "start |" Settings | Connections | USB to PC"and unchecking the checkbox"Enable advanced network functionality. "

  HAL

  --

  HAL Hostetler, TCE

  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX

  www.kvoa.com - KVOA television, Tucson, AZ.

  Live Hot Licks -www.badnewsbluesband.com

• How is used to find the mac address of my ipod and iPhone which is attached via USB windows 7

  Deployment of several hundred iPods and iPhones and need to conclude the names MAC and device Cisco ACS.

  Wondering how to find the MAC when the device is connected via USB to a Win 7 box so we can cut and paste the name of MAC and device in the Cisco app to avoid typos.  Thank you

  Hello

  Thank you for keeping us posted.

  I wish that post you your request here-

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Also try posting your query in the communities of Apple as well-

  https://discussions.Apple.com/index.jspa

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• H323 Keep-alives

  I have a client with calls H323 falling at the 1 hour mark. classic symptom of H323 or H225 timeout issues.

  Problem is that the customer has a network refuses (big client with many geographically distributed teams) to adjust the firewall of the team time-out values.

  Is there a way to Setup persistent on endpoints or the VCS?  Endpoints are mainly MXP always, slowly being changed for C-series.

  Thank you.

  Hi Anthony,.

  Cisco/Tandberg endpoints use H245 messages to keep alive the call, they send H245 keep alive messages every 30 seconds. However, in some cases, the firewall does not consider the Dungeon H.245 living messages and then it disconnects the call if no H225 keep alive messages are received during a certain period of time (in your case, 1 hour).

  The problem is, most of the Cisco/Tandberg endpoints cannot send H225 keep alive messages, only H245 messages (they use the roundTripDelayRequest and roundTripDelayResponse messages). Of the endpoints of TC, TC6 and versions later, Cisco has provided a keep alive feature H225, but the default time is 2 hours and that cannot be changed, so endpoints keep alive session every 2 hours.

  For the MXP endpoints, as far as I know, we're not support H225 keep alive, only H245.

  Therefore, you should really fix the configuration of your firewall, once you can make any configuration change in the endpoints to solve the problem.

  Take a peek at this defect associated with H225 keep alive question of the endpoints TC, note that Cisco suggests customers to make adjustments in the typology where the H323 (H225/H245) sessions are sent via or on the device firewall to handle the video traffic correctly.

  https://Tools.Cisco.com/bugsearch/bug/CSCub20591

  Another people in the community here has had the same problem, see:

  https://supportforums.Cisco.com/message/4039690?referring_site=BSS&channel=BDP#4039690

  https://supportforums.Cisco.com/message/3952227?referring_site=BSS&channel=BDP#3952227

  I hope this helps.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• HP LaserJet M401dn via USB

  Environment: Horizon view 5.2 with WIN7 linked clones and persistent disk.

  I have a HP LaserJet P1606dn printer. When you connect the printer via the usb port (this is how it should be implemented), the printer attempts to load, but installs as an optical device. The drivers are on the link clone. What I did next is to connect the printer to the network and to enter an IP address. I then went in the printer settings via a browser. The printer is a parameter called "automatic detection". I have disabled auto connect. Then I unplugged the printer and connected via USB. Now the printer is displayed correctly on a clone of link and works all the time.

  Now for the M401dn I added the drivers to the virtual machine. When I connect the printer via USB, it prompts you to install the drivers. You can go through this installer and it will install the printer on the link clone, but when you restart the machine the clone of link does not keep the installer. That's how a clone of link is supposed to work. I tried connecting via an IP network and see if there is an auto connect as the P1606dn, but I don't see one. So, how can I get this printer to be installed on a clone of link via USB?

  Thanks in advance for your help.

  I found the answer. For all those that are insterested the HP LaserJet M401dn printer has a display screen. Turn on/off service, HP Smart Install. Disable Smart Install.

• Speakers for iMac via USB Dongle

  So, I bought a USB 3.5 mm dongle so that I could connect the external Boston CR6 speakers to my iMac. I get sound but it is pretty low. The volume level is the same if I plug the 3.5 mm plug into the hole in the back of the iMac.

  I think it is a difference of impedance, or the iMac does not have enough juice to power the speakers (which are actually very small).

  Is there anyone driving experience of the external speakers, via USB or directly via the 3.5 mm to 3.5 mm port? I will order a small amp if that's the problem?

  Maybe audio HDMI or optical has more power? I don't see a spec (which I understand).

  10.11.6 running.

  Thank you.

  FWIW, most if not all sound cards were never intended to push the non-powered speakers. That's why most of the 'computer' speakers are powered. You will need amplification of some sort.

• Control external synth MIDI via USB keyboard controller

  Friends,

  I'm trying to get a Novation Launchkey 25 to work as an external controller for mother-32 MOOG synthesizer.

  Software - Logic Pro 9

  USB - LaunchKey 25 Novation keyboard controller

  Interface - Focusrite Scarlett 18I6

  MacBook pro with current operating system

  Currently I have the out of the Focusrite and towards the MOOG MIDI cable. The Launchkey is connected via USB on my Mac. Logic can see the keyboard and interface, but not the MOOG. I just want to control the MOOG mother 32 with the keys. I am at a loss on how to implement the logic. Any help would be greatly appreciated.

  Thank you

  Steve

  1 MIDI OUT of the Focusrite at noon on the MOOG.

  2. create an external MIDI track with the release (in the Inspector) on the MIDI OUTPUT Focusrite. Also assign the desired MIDI (or ALL) channel. Better, the use of the channel the MOOG is set up to receive on.

  3 connect the headphones to the MOOG, to see if it is audio output. To get the audio MOOG through logic, you should run the audio Moog in the Scarlett outputs, create an Audio track, the value of channel inputs inputs use the MOOG, the value Preferences / Audio monitoring software allowed to logic. Allow recording the audio track. You can select two tracks (Audio and MIDI external) using shift/select, if necessary. Audio will come from Scarlett.

  It is another way to analyze using a plugin, get that first day.

• iPhone 5 c will not charge via USB on the laptop?

  Hi all.

  I have an iPhone 5 c and as about a week ago, does not charge via the USB port on my laptop. He sees very well in my wall sockets and Sockets USB as well, but not in my laptop. I have an Acer laptop running Windows 7. Windows is up to date, iTunes has the latest version installed. Whenever I plug in my phone, one of the following conditions occurs:

  (1) does not have

  (2) noise "plugged" USB lights, the window on the lower right, tell that a USB device has malfunctioned

  (3) (rarely) of phone calls after I tried several things

  What happened is I would plug my phone, she would charge via USB, iTunes opens automatically, and "trust to this computer" popup would come on my phone if I had unlocked it. None of this is happening now. I did the following to try to remedy:

  (1) power cord iPhone replaced (it was time for a new anyway)

  (2) uninstalled and reinstalled iTunes

  (3) restart computer and phone probably 29856 times

  (4) device Manager... nothing comes up at all, not even the unknown device. RARELY the unknown device comes up, then I get a "Code 10: this device cannot start" error, but it is * in a handbasket just trying to get to THIS point! and IF I do what they say to do to correct a code 10 (uninstall all USB and restart the computer, then USB devices hook to the top one at a time), so I'm now at my problem of a communication that don't meet pluse between my phone and PC

  5) tried to the registry editor, but not "upper filters" option rises

  (6) virtually every other option on this thread of 5 pages iphone not recognized by Windows 7

  Help, please?

  The USB port of your laptop does not provide sufficient power to recharge the phone. It is a hardware problem with your laptop, not the phone.

• Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

  You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

• Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Updated at El Capitan and my mac doesn't see my camera Canon (connected via USB). Need help. Cannot import images.

  Try using using the Image Capture (in the Applications folder)?

• drive external hard connected via usb hub powered Time Capsule guard fall...

  Hello.

  Try using a player external 3.5 "connected via USB hub powered to my Time Capsule to serve as a backup Time Machine secondary.

  When I connect the external hard drive, it turns out, and everything seems good (Yes it is correctly formatted). I see the external hard drive in my time machine preferences panel and also the desktop browser window, etc..

  After selecting the drive hard as the second backup TM, I start TM. After a few minutes the backup fruitbodies. Audit of airport utility, the drive no longer appears in the profile of Time Capsule. I can't turn back the drive without unplugging / plugging the USB cord. I went to HD (WD green 4to) and HGST 4to - deleted both.

  What is the speaker (the box is powered)? Can you have a USB hub between the external hard drive and time capsuls? Something else?

  Just seems like something somewhere that expire, causing it to drop the connection...

  Thanks for your useful suggestions to fix this!

  Is your TC the Gen5, model AC?

  I must say that your experience is not uncommon. I tested it myself recently and was disappointed in how the poor reliability has been... Although not as bad as yours... in fact cutting in a few minutes to start a backup is ridiculous.

  What is the speaker (the box is powered)?

  Quality of the envelope varies a lot... What is it??

  If this is the typical brand X... Plug it into your Mac. is it reliable?

  Go to your control panel and dig up the actual USB chip used... I don't know if we can help on type a lot. But it helps us determine the fleas are a problem.

  I found the hard drive in the finder to mount helped... not the sparsebundle that must be mounted by Time Machine... but the disk must be mounted in the finder so that you can copy files back to him.

  I start TM. After a few minutes the backup fruitbodies.

  Check in the finder, it has created the sparsebundle and works.

  Can you have a USB hub between the external hard drive and time capsuls?

  It's our usual recommendation... but he won't always help... especially if the USB hub is another brand X...

  Note that all societies are changing USB tokens at the drop of a hat... some seller of a rival company arrives and offers them 1 c off the coast of 1 million chips it is common to spend even in the middle of a race. Even the tenors have no satisfactory fixed hardware...

  The computer has loads of memory... and may contain drivers for hundreds of different USB tokens... but the TC is a very limited amount of space and with questions if the driver is not fair.

  I started a thread for a database just now... has not progressed much.

  https://discussions.Apple.com/thread/5912861?TSTART=0

• photos do not sync via USB

  I want to synchronize my photos from my iPhone 5 for my iMac via USB, so I can remove them from my camera.  When I connect my iPhone, it seems pictures is not recognize.  It used to open and ask if I wanted my pictures deleted once they have been synchronized, but it is no longer made it automatically.  The last time, I stumbled upon a way to make it work, but I don't remember what I was doing, and I'm having the same problem.

  Connect your phone to your Mac. Launch the Photos app, and then do what it says in bold below.

  How to stop the Photos App launching automatically in OS X

  1. Connect the iPhone, camera, SD card, etc for Mac and app launch Photos leave itself as usual
  2. On the tab 'Import' from the Photos app, look in the upper left corner to find the device name, this indicates that the material is no longer automatically activate Photos app
  3. Click on the checkbox to 'Open Photos for this device' is more selected (, this failover on would allow the Photos app to open automatically when the device is connected)
  4. Smoking out Photos app, the change is immediate for this device - this can be activated at any time in the same app screen OS X Photos

• Toshiba Regza 46VL743G - playing files via USB stick

  Hello

  I have problems with playback music and videos via USB. I tried to format my USB for different file systems (ntfs, fat, ms - dos, for example) and video formats, but the screen is black, I launch the media player.

  My TV has played with MS-DOS Format the photos, but no mp3 or divx/avi files. I run the multimedia player with 'video' the led of the USB stick flashes, but after a few seconds the led turn off (I think that the stick loses power).
  My other TV (LG 55LE7510 55 '') plays all video files and mp3 without any problem (ntfs and video format *.avi)

  Someone has an idea?

  Hey,.

  Have you tried another USB key and the same thing happens with another USB key? Usually, you use the FAT32 format for your USB key. Then the TV will be able to recognize it and all the files it contains.

  According to the specifications of your TV supports jpeg files (USB and SD card), MP3 (USB) and video DivX SD (USB).

• Satellite U300 - only the external mouse works via USB

  My touchpad has stopped working. I tried to reload the driver, reset the settings via the control panel and checked the Fn F10 button. My external mouse works via USB and I have not activated the button ' disable when the external mouse connected "(and even when the mouse is disconnected the touchpad still does not work).

  Any help would be appreciated. I don't know that I missed something very simple.

  Hey Buddy,

  > checked the button Fn F10
  It is the combination of bad for touchpad keys. You must press the combination of keys FN + F9 to toggle the touchpad.

  Check this box!