My new HP 6500 has more printer will install properly and paperjam, on the contrary.

This printer is new and I tried new drivers, no Jam (when he's going to say that instead of print).  I almost fixed everything on my pc before, but it made me very frustrated.   I reconnected the printer several times, but also I do not believe that the printer receives adequate controls of the PC which leads me to believe that other readers download I downloaded and the printer cd does not work for some reason any.  I'm trying to figure our why it seems that the printer will not receive any orders, before it says "paperjam" reason appaqrent.

Hello

Follow the form of measures troubleshooting article and check if that helps.

'Paper jam' message displays on the all-in-one

http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02441153&cc=us&DLC=en&lang=en&LC=en&product=4083977&task=solveCategory

Also, try to contact HP support and verify.

http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

Tags: Windows

Similar Questions

  • OfficeJet 6500 has more: printer will not use BLACK ink to print in BLACK. Mix of colors rather than use BLACK.

    Printer prints BLACK ink BLACK, instead he mixes the colours to make BLACK.  It creates copies in BLACK only, without mixing colors to achieve the BLACK, but when I ask it to print something it automatically uses the ink color.

    In properties, advanced, I checked the box to print in BLACK only, but did not help.

    In the printing preferences, shortcuts, where it says printing in grayscale, do you feel black ink only as a default?

    I don't know if it will work, I do not use this parameter or the Advanced setting, I have been using high-quality grayscale, but I'm interested to know why, also, when I print 99.9% of the time with color, what I need to change the color ink cartridges so frequently.  You say the color of those who are used to make black.  That makes no sense to me either why the printer would do that, except high-quality grayscale means he uses color inks vs only Black Ink is not.

    Test printed with two parameters, and that is exactly the same, so I won't set my default preferences for levels of gray-black ink only printing and see what happens.

    What how can you tell whether or not the printer is mix colors?  (by the way, if you use unusually fast color ink)

  • 6500 has more: printer was working fine and then stoped feeding. Found a small gear broken wheel-shaped plastic

    Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.

    Well, your printer is broken. If under warranty call HP.

  • I have 3 PC home networking with a router. How to connect my new hp 6500 has more so any pc can print

    I have 3 PCs at home with one with XP 32 bit and cable to connect to a router Internet, the secoond PC with windows 7 64 bit and wireless to the same router and the third PC with XP 64-bit with the same wireless router. Currently, two have their own wired to their own printers. I want to replace the two existing printers with my newly purchased HP Officejet 6500 has more which will be located next to the XP 32 bit PC which has currently a cable connected to the router. How can I connect the new HP Officejet 6500 has more to my network to allow any of the three computers to print to the officejet and install the HP software on all 3 PC and if so what progs? I'm sorry if it's a very basic question, but I'm not a computer scientist and the help delivered with the printer documentation does not appear to this lay person to give this information on how to set up a home network with this printer. Thanks in advance for any advice.

    Mike4D

    Hello

    You can choose one of the following 2 options:

    Option 1: simila in the image above

    Connect the printer to the router,

    Connect a PC to the router (not wireless computer)

    Option 2:

    Connect a PC to the router (not wireless computer)

    Connect the printer to the wireless router

    Option 1 makes the computer without a connection to the printer. For the other two computer is the same on the two configuration options.

    Please use the following book to configure things

    http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

    Kind regards.

  • Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

    HP Officejet 6500 a Pus E710n-z series

    Windows 7

    Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

    Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

  • OfficeJet 6500 has more printing problems

    My Officejet 6500 has more (model CN557A) is connected through the USB port.  My operating system is XP.    I can scan my computer, I can copy and print from the printer control panel, but I can't send anything to print from my computer.  This problem just started about 3 days ago.  I tried troubleshooting but I have not received the case.  I did not add new programs, and I have 194 GB free on my hard drive.

    Can anyone help?

    N ° however, I accidentally discovered the problem.  I had a card reader connected to my computer to download pictures.  Apparently it disrupted the cycle of printing for my printer.  I removed the card reader and the printer works fine now.  Thank you for your response.

  • Office jet 6500 has more printer offline

    HP Office Jet 6500 has more problems with the paper jam.  The printer now shows "offline".  The printer works correctly when you use the copy function.  This is a wireless printer.  I tried printing HP and Scan doctor but the test page does not.

    I reinstalled the driver and who took care of the problem.  Thanks for the quick response.  I will try your solution if it never happens again.

  • Re: HP 6500 has more print head always needs replaced

    I own a HP 6500 e709n and have had problems with the cartridges of printers are not recognized and experiences one now where worked my 920 dual black cartridge and the printer being functional black print only with no error messages but not color print as one or more of the cartridges were probably low or dried up. I changed the cartridges out with genuine hp 920 s and now get a message indicating one or more cartridges missing or damaged-cyan. Put my old cartiges backwards and got the same failure where none were before with them. From cartridge games and open holes with PIN as described for if ensure that ventilation was allowed both sets and retried. Was always the same message on cyan then pulled the print head and cleaned by the procedure several times hp. Now get the ink system failure. Cleaned again now return to the failure of the cyan cartridge. Loop d zero. Seems that this printer know when I really need and fails at that time in a way that I can't fix.

    I worked in the manufacturing sector and in my case all returns have been watched and analized by Tech as a measure of the quality control or quality assurance. It makes sense for business profitability so much customer satisfaction. In my view, because there is a common problem that seems to be frequent, there is an exact question that was observed by the company (HP) and they know what the problem is. IM surprised that information has not been put forward here by people who represent so called HP. What is the main problem that change a print head - relieves most of the time? Dried up ink in the corridors. Hard Electronics failure of the members of the Ribbon or pc? Faulty detection mechanism? Mechanism of cartridge HP cartridge original problem to prove ID? Customers using non hp cartridge or refill the cartridge authentic? ... what causes?

    Thanks for the reply. As I said in my post 2cnd problem was completely healed of many print CRC head baths and a toothbrush. Is there a reason why it has been edited my first post on the thread? Apparently you still like you he referenced earlier. Thanks, Keith

  • HP Officejet Pro 8500 has more: printer will pick up paper from tray

    Hi - my printer has been working without problem for 3-4 years, but recently has been giving the 'out of paper' error even though there is paper in the tray. I have not changed suppliers of paper, the printer is in good condition (clean, dry, etc.). The print requests go to the printer via wifi but it seems that the collection of mechanical paper does not. No indication on the issue and recommended fix appreciated. Thank you

    DocCottle - Thanks for the link! Problem solved as ferry wrongly by default (or in a tray that does not exist by default). Thank you for your help. Best regards, Jason

  • Re: Officejet 6500 has more - printer goes to sleep, wakes.

    Hello

    Location: HP Officejet6500A more - new iMac 27 "with Mac OS X 10.7 (Lion) - new driver installed OK HP - printer is connected via USB and I turned off the power on the printer wireless.

    After that full power on the work of the printer scans well, work, fax work - but what printer goes to sleep "indicated by the power LED flashes slow" I can't wake him again when sending a new print job - I need to do a full power off/on power by removing the power cable.

    When the printer is "asleep" utility printer HP cannot connect until I do a power full printer deactivation / activation.

    While the printer is in standby, pressing the flashing slow power switch / light has no effect to wake up the printer, only a full power/turn off works.

    I could not find info on the led slow blinking power manual?

    Any thoughts?

    Thank you

    Tony

    Hello

    Thanks for the post.  With this one, I recommend following the steps listed in the link below.  Make sure you are plugged directly into a wall outlet, not a power strip or conditioner.  Good luck!

    http://support.HP.com/us-en/document/c01321436

  • OfficeJet 6500 has MORE printing problem

    Y at - it a setting to load the paper? My print jobs is now too high on paper. I have recently updated my computer to Windows 8.1 but I do not know if this concern began before after I've changed computers. I printed the page diagnosis and the letters are about 1/3 cut top

    Welcome to the mike325 forums

    I saw your post on your Officejet 6500 more model cut your impressions. I suggest an alignment running on the printer to see if that helps. You can also run the HP print and Scan Doctor to solve printing problems and that the tool can help to clear up the problem.

    To help alignment, click here and scroll down until "step 5: align the print head": align print head

    I hope that these steps to do the trick, please let me know the results!

    Have a wonderful Thursday

  • Re connecting my HP Officejet 6500 has more print

    my printer has stopped working.  I disconnected everything... reloaded - shows in my devices, but still is not printing

    Hi Karen,.

    Please answer these questions to better understand the issue.

    1. do you have that you have installed the latest drivers of printer that is compatible with Windows 7?

    2. you are trying to connect the printer via a wired or wireless?

    3. do you get an error message?

    You can follow the steps in troubleshooting of this article. This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

    Solve printer problems

    http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    See also the suggestion of this link to HP support:

    Printer HP Installation troubleshooting

    http://WWW8.HP.com/UK/en/support-topics/printer-installation/printer-troubleshooting.html

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • OfficeJet 6500 has more will not print black - Solution

    My 6500 has more do not print black even with new cartridges.  There is instruction to Reset to solve this problem for the 6500, but reset instructions do not work on the 6500 has more.

    How to reset the 6500 has more

    Thank you

    I paid $20 to HP for this information.   They said that the secret to getting the Menu support isn't on the web for the 6500 has more printer.

    My printer has stopped printing black, even with a new black ink cartridge.  I've had the printer for the last 4 days guaranteed when this happened.  Was on my second or 3rd Xlarge black cartridge.

    Steps to fix it.

    1. remove the cartridges

    2. remove the cartridge door / carrier, lift the big lever to release him.

    3. clean the contacts of the cartridge with water and cloth.

    4. clean the contacts and all other surfaces on the Cartrdge support with water. mine has all backen up with ink - it filled the sink with black water.

    5 clean the contacts copper this interface for the cartridge door of the printer. . These were covered with of ink too.

    We then conducted cartridge alignment and it 'Fail' printer still does not work.

  • HP 6500 has more wireless printer = > hp eprint does not not with pdf

    I have a brand new HP 6500 has more the wireless printer.

    I tried to print using hp eprint Centre by sending a pdf file as an attachment to the e-mail address of printers.

    But the printer don't like pdf and print an error instead, with the message below page.

    =======

    Please wait...

    If this message is not subsequently replaced by the good content of the document, your PDF file

    Viewer is not able to display this type of document.

    You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

    visit blah blah blah...

    =======

    I see that I have a recent version of the Adobe reader - Adobe Reader X - Version 10.1.0

    Please help and let me know if anyone has already had a solution.

    HP customer support -?

    Thank you

    Antony.

    Oh... Yes. It worked. !!

    Thanks Jack for your contributions, which helped a lot.

    The issue was not with the printer, but the PDF itself was a secure PDF document.

    I tried to copy the document from my pc to mac and I tried to open the document, and what I saw, it was exactly what was printed earlier in my first post.  Tried to attach my email and once downloaded, the document had only those got printed text (also pasted below).

    It works when printing directly from the pc more (with or without wire) finally got. Seems good now.

    =======

    Please wait...

    If this message is not subsequently replaced by the good content of the document, your PDF file

    Viewer is not able to display this type of document.

    You can upgrade to the latest version of the Adobe Reader software for windows, Mac, or lInux by

    visit blah blah blah...

    =======

    Thank you

    Antony.

  • Setting up my HP Officejet 6500 has more the Question: first install the disc?

    Hi all!

    I was wondering if I should install the disc that came with my HP 6500 has more printer FIRST before connecting it to the top wireless? Or connect upward wireless first before installing the drive?

    I saw somewhere where the plug & play when the connected printer caused some problems that did not accept the disc that came with the printer it seemed to replace the drive.

    Any help would be appreciated before doing anything with the hook to the top of my new printer.

    Thank you!

    If you connect the USB printer that the answer is YES.

    First run installation, during installation, you will be asked to connect the USB cable, then only, you need to connect.

    Kind regards

    Shlomi

Maybe you are looking for