dektop copmputer goes no more 'sleep' mode

Similar Questions

• Satellite L750 goes no more 'sleep' mode

  I've had my L750 for 10 months now. Suddenly it will not go in mode 'sleep' when I close the lid. I checked the power settings and it is set to standby mode when closed.

  Everyone has ideas, I'm sick of working full time.

  On this virtual path, it is not easy to say why this is happening. The configuration of your laptop is unknown for us but maybe some background process or in the background running application block it.

  Try to stop some of them manually and check again.

• My gamma automatically goes out of sleep mode

  I have the laptop of Lenovo W520 with the calibrator of color (not sure if the software is the culprit).
  When I calibrate the color using the color (Pantone software XRite) Stallion seems big enough.
  The question is whenever I just watch the gamma goes to a very high value every time and everything is washed and I have only two ways to solve this

  That could be the applet of the control panel graphics Intel apply it's own color profile and your substituting at startup.

  Try to go into the MSCONFIG Startup tab and uncheck the three Intel graphics of start-up entries. (This could cause a shot of life battery.)

• Windows 7 computer goes into Sleep Mode while the activity of the system

  Hello, I have windows 7 premium.  I think there may be a bug that needs to scan, my system goes to sleep while there is the activity of the system.  For example, when downloading a file, do a virus or by post where analyze or defragment.  I believe that the year 2010 are the operating systems with the smart enough so that the system is active and goes to sleep during execution of these programs are active.  Can someone tell me if this is a bug or suggest software to keep the system awake while 'X' program options is actively running, for example if I do a defrag of HDD, I don't want to change power if the computer is running all night, only for 2 or 3 hours that the scan is running Once the program ends defrag'ing the systemit should then wait for the time set in power options and stop.

  Hello
   
  If there is no interaction from the user to a certain amount of time, the computer goes into a sleep mode was
  application runs in the background. This isn't a bug. You may need to change the settings for options of power as a result.

  Sleep and extended: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
   
  Change, create, or delete a power plan (scheme)
  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart 7520: Sleep Mode failure

  I have connected my 7520 Fax item and run the report of Test of Fax with Pass at each event.  The printer goes into Sleep Mode it almost immediately turns back.   When I disconnect the telephone line from the printer, the problem goes away and Sleep Mode works correctly.  Any ideas?

  Resolved - traded filter broadband ADSL with another taken.

• HP Pavilion starts extended standby/sleep mode and stays there - there is nothing on the monitor

  I have a desktop HP Pavilion Elite HPE-250f (Core i7).

  I have been using internet. Suddenly the computer makes a little sound, and the screen went white. The computer seems to be in hibernation / sleep normal. Generally, when the computer goes into standby/sleep mode (after a certain period of not used), the color on the power button turns from blue to yellow. But this time, the blue color.

  Usually, I can move the mouse and exit this mode. But this time I moved the mouse and nothing happened.

  I pressed and held the power button and turns off the computer. I then turned the computer back on. The power button is blue, there is a green light on the back of the computer, and the fans were at work. But nothing on the screen.

  I rebooted several times, and there is nothing on the screen. There is no beep when the computer is restarted.

  What should I do? Help, please. Thank you.

  I removed the RAM memory cards and reinstalled them. That solved the problem.

• iPhone 6s more going in as a sleep mode when sitting is not.

  iPhone 6s more going in as a sleep mode when sitting not used. I won't get it any delay message notifications until something wakes the phone as a call or unlock the screen. Sometimes, he sends even calls to your voicemail and imessages simply sit not showing not delivered to the other side of people. Seems to happen only when connected to wifi. Anyone facing this problem or have any suggestions? I checked all the settings that I even tried to leave it plugged to load and forever changed the automatic locking.  When that happens all notifications go out at the same time as overload and the sound does not come through them just the notification screen on... Help!

  Is do not disturb on? Icon of Crescent Moon at the top right

  If yes it off using the control center

• 64 bit Vista crashes when the system goes into Sleep Mode. Have cold start. Simultaneous began with the June 8 patches.

  This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue.  The hard drive worked without interruption after that.  I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover.  OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates.  I looked at the Windows Update settings and it has been set to automatically install updates.  It is quite possible that the user did not know and did not recognize there are pending updates.  Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it.  There may be registry entries need to be corrected?

  Duane G. Leet, Ph. d. 45 years of experience in technology

  Microsoft support has provided a solution.  Here is the procedure:
   
  We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
   
  Step 1: Launch the tool to reset Windows Update and the update of the system tool
  ====================================
  1 download and run reset Windows Update Tool from the link below:
   
  http://go.Microsoft.com/?linkid=9665683
   
  2 download and run the update tool of the system from the link below depending on the Type of system:
   
  Update for Windows Vista 32-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
   
  Update for Windows Vista 64-bit system tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
   
  Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
   
  If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
   
  Step 2: Download the installer of Windows Vista SP2 Standalone
  ===========================================
  1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
   
  Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
   
   
  Step 3: Install Windows Vista SP2 in clean boot Mode
  =========================================
  Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
   
  1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
   
  Note: Click 'Continue' if the "User Account Control" window appears.
   
  2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
  3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
   
  Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
   
  4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
   
  To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
   
  If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.

  +++++++++++++++++++++++++++++++++++++++
  The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time.  The installation process was probably longer than the time that the system has increased...  Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error.  Duane G. Leet, Ph. d. 45 years of experience in technology

• NetBook Asus Eee disconnects me from the internet whenever it goes into sleep mode.

  I just got an Asus Eee netbook with Windows 7 Starter installed.

  Whenever the laptop goes to sleep or sleep, he disconnects the internet and refuses to reconnect.
  The only way I can make it work is off my home router and reset the system.
  It's annoying and embarrassing. Is there a way to get around this?

  Hello

  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3 is this a wired or wireless?

  Method 1:
  Perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:
  You can try to disable the functionality of management of power in network adapters,

  a. click on start

  b. right click on computer

  c. click on manage the

  d. click on Device Manager in the left pane of the window

  e. expand your network card.

  f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.

  g. go to the power management tab.

  h. ensure that all boxes are unchecked.

  i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.

  Method 3:
  If the steps above don't you can try the steps in the link and check.

  After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state

  http://support.Microsoft.com/kb/937477

  Reference link:
  http://Windows.Microsoft.com/en-us/Windows7/why-am-I-being-disconnected-from-my-network

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer

  When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.

  I've updated the BIOS and it is not fixed.

  Hello

  Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
  Have you tested the laptop with the factory and preinstalled Toshiba system parameters?

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• What can I do if the TV turns on and goes into sleep mode? Standby blinks 9 times

  Model KDL-46xbr2 power button press that TV is available on any photo goes into sleep mode which flashes 9 times stops and continues to blink 9 times

  Where is the help people?

• What printer goes into sleep mode computer stops

  just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down.  currently I'm keeping the printer in demo mode so that it does not expire.  Anyone know how I can use printer without him turning off the computer in normal mode?  I talked about Noone has even heard of that happening.  I hope someone can help. Thank you!

  Hi @JNBLanocha

  My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.

  

  3.0 ports are supposed to be backwards compatible, but I've seen questions arise.

  I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;

  1. You have a USB connection
  2. If the USB is connected, you use a 2.0 port or 3.0?
  3. Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
  4. You put XP or you remove XP and install Windows 7?
  5. You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
  6. Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.

  I look forward to hear from you and to work towards a solution.

• Monitor goes into sleep mode

  I searched in vain for answers to my question, can anyone help?

  My monitor LCDS240HLBID goes into sleep mode when the PC is turned off, is there an off button to monitor?

  Thank you very much!  It was really frustrating me.  There is nothing in the manual referring to it.

  Best regards, Ladyhawke