Delay in showing the different applications print preview screen

Similar Questions

• I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

  I paid for the pack of adobe PDF and I in some weird screen which shows the different products to buy. I just want to use the pdf pack to do what I need. any suggestions?

  Hi jerrir58650452,

  You can access your service pack pdf by using the following link: https://cloud.acrobat.com

  Kind regards
  Rahul

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Will not print, but 1/2 on the firefox page and only see half of the page to print preview, but will be printwhole page of IE and quickbooks.

  When I try to print anything on the Web, only the left part of the page will print, nothing in the middle right of the page display. It presents this when you preview before printing. I tried taking OFF reduced to fit and it still does not show the right half of the page, printing is just bigger.
  I can print anything Internet Explorer and Quickbooks, but not from Firefox. I downloaded all the versions up to 5.0. He did print prior to upgrade, but I don't know which version actually worked.

  See if the troubleshooting steps in this article solve your problem: problems printing web pages.

• By clicking on the file and print preview is no longer gives a preview before printing.

  I'm used to be able to click on file, then on preview before printing. Now all of a sudden it no longer works. There is no preview before printing.

  How did the extension HP Smart Web Printing4.51 true [email protected] enabled?

  As far as I know, this extension did not work in Firefox since version 3.5 of Firefox.

  Try disabling this extension and see if print preview works.

• Can not see the page or print preview in Notepad numbers

  About Notepad, I want to be able to see or print preview print page numbers so I want to know how many pages of the document is before I print it.

  On Wednesday, January 5, 2011 17:18:40 + 0000, Michellemlillie wrote:

  About Notepad, I want to be able to see or print preview print page numbers so I want to know how many pages of the document is before I print it.

  Keep in mind that Notepad is a text editor, not a word processor. There
  generally used for short text - things like files .bat files. Then
  calling for what you can produce with it a "document" is somehow a
  overestimation.

  If you want to produce documents, with things like page formatted
  numbers, you should get a word processing program. There are
  several choices, some are free, some for sale:

  1 Wordpad, which ships with Windows. WordPad is really more of a
  text editor glorified than a real word processor, but if your Word
  treatment needs are light, it could meet them.

  2 Microsoft Word, you can purchase either by itself, or in the context of
  Microsoft Office. It's a powerful word processor and the more
  a popular.

  3 OpenOffice which is free and is supposed to be compatible with
  Microsoft Office. It is partially compatible, but not perfectly.

  4. the processor which is part of Microsoft Works. Another light
  product to sell. It is not as good as the best choice, but it could
  meet your needs.
  5. one of several other products processing for the sale by
  companies other than Microsoft. My personal favorite word-processing,
  WordPerfect, falls into this category. WordPerfect is not free, but
  It is cheaper than Microsoft Word or office and in my opinion, one
  best product.

  Ken Blake (MS-MVP)

• How to show the background application

  Hello

  I want to follow an alert in my application when the application is in the background.

  I tried with this code: -.

  Alert: AlertDialog var = new AlertDialog();

  Alert.title = "alert";

  Alert.message = 'Notification '.

  alert.addButton ("Cancel");

  alert.addButton ("Show");

  alert.dialogSize = DialogSize.SIZE_SMALL;

  alert.addEventListener (Event.SELECT, alertButtonClicked);

  Alert.Show ();

  But it does not show the alert outside the application.

  But on further research on the web, I had found earlier than alert.show (IowWindow.getAirWindow .group ()); will allow the alert to be strictly within the application. Is this means that show() alert will generate alerts in the foreground, even when the application is in the background?

  Also, I want to put the application in the foreground when you press the button display. is it possible

  That is to say, the application state must be changed programmatically to 'normal '.

  Please help me

  Thanks in advance

  Vineeth K

  Looking for QNXSystemPowerMode to learn more about how to run your application even when it is in the background.

  Note, however, that if you do it wrong, you're going to drain the battery too fast and no one will want to use your application.  Do not set up just to sit in THROTTLED mode all the time if, for example, you want to just check a timer and do something later.  There are ways to use this very effective stuff, if you spend the time to learn.

  In addition, with regard to the "bring programmatically the app in the foreground", it is not possible unless you use a dialog box modal system (in other words, what you get with alert.show (()) just does it automatically.

  And it's probably a good thing... If I installed an app which itself has jumped to the forefront, becomes the active application, I would probably uninstall it immediately.  After all, how do you know that what the user is doing is not more important to him that no matter what your application wants to report?  It might be in the middle of a game, or give a presentation, or else where he does not want your application is throwing in the view.

  The same goes for using the 'modal system' form of the dialog as well.  I highly recommend that you not use it.  I believe that it is really only meant for critical problems of the system, such as the lack of flash memory or memory, and you will notice that it is not even use it to the situation of the latter.  (It might not for low flash either... I've never tried still get there.)

  If you want to attract the attention of the user, using a sound index (for now, the way that only acceptable, in my humble OPINION) or wait until the Notifications feature is documented and fully available for us.  That do the little "red flash" appears in the upper left corner and display a notification in the tray (top left corner) as well as how the PlayBook is currently app updates are available in the App World.

  If you insist on the use of the modal approach of the system, I would be very interested to learn what is the use case, as so far, I do not think that someone has described one that would generally be considered a valid use of this API, for most users.

  Finally, if you don't use a modal system, consider to give the user a way to disable it, as in your settings menu.

• Insight into the different browser to preview in Adobe Muse

  Hello

  I have a big problem with the preview of my Web site in a browser. In Adobe Muse, the preview looks like as it should:

  

  It's the page layout in Muse:

  

  And this is the insight into the 100% browser:

  

  and the preview in the 90% browser:

  

  Preview in browser 80%:

  

  Someone else, who has had the same problem and could help me with this?

  Thank you and best regards

  Same old, same old: nothing on your page correctly grouped or locked by widgets, so nothing can answer correctly to external changes such as the size of the different browser. You just placed on the page, which does not work most of the time...

  Mylenium

• DESC, showing the different type of data value via dblink

  Hi friends,

  We have two databases and for two of them, the configuration is as below

  Version of the operating system: Solaris 5.10

  DB version: 10.1.0.4

  For security reasons, I'm going by names of junk. Assume the names of database DB1 and DB2.

  We have a table T1 S1 schema of database DB1. to extract data from this table in DB2 in schema S2, we created a database DB1 and DB2 (lets say the name of dblink is XYZ)

  In DB1, in table T1, we have a column by name SYS_CREATED and its data type is varchar2(40 char).

  After you create the database link, below we have the table as desc

  DESC S1. T1@XYZ

  When we describe this statement, instead of showing the value of data type of column SYS_CREATED as varchar2(40 char), it's showing as varchar2(160 Char).

  Then, we created a table in DB2 under schema S2 as below

  SQL > create table S2. T2 in select * from S1. T1@XYZ;

  and now, when we describe the table T2, its original display value is varchar2 (40 Char).

  Then just when we described, it shows a higher value for the data type and when we create the table, his watch even than the original. In addition, what is happening to only varchar2 datatype. other data types such as number or tank remain same even when we describe.

  one thing is, when he demonstrated a different value using describe, sound exactly multiplying by 4 times. for example, if we have varchar2 (1000 char), the varchar2 (4000 tank) showing

  I would like to know if anyone in this strange situation earlier, if so, what is the reason?

  Thank you very much in advance

  > Unlike when you access a local object, the SELECT privilege is required to access a remote object because the database has no distance describe ability. The database must be a SELECT * on the remote object to determine its structure.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28310/ds_concepts002.htm

  What happens if you give the right to select on the remote object.

  Concerning

  Girish Sharma

• Print preview screen forces small print

  Something happened to the preview screen before printing. It displays the Web site to print as a small box centered at the top of the preview screen print and force feel also like a small box at the top of the printed page. If I change the scale, the image in the Exchange area but not the box itself. This is the box to fill the screen, so it will fill the page when it is printed.

  I fixed my own problem - then I will document in case anyone has the same problem. First of all, he had nothing to do with the preview before printing. I found that if I print from the file menu (file / print), which bypassed the print preview, it displays the same little box. When I opened the properties of the printers, I noticed that the Page size has been defined: User Defined (3.5 x 5.0 inches). Where that come from I don't know, but when I changed the size of the Page of: letter (8.5 x 11) and printed the webpage, it filled the paper. Now I can open print preview and it shows the mode full-screen and print the full document. What is strange, is that before I made this change, printing from another browser (like IE) print a web page very well. Only when I used Firefox Page size have not shown in 3.5 x 5.0. I guess the size of the Page - while in Firefox - fixed the problem.

• Can perform you several tasks at the same application on both screens?

  Hello

  Is it possible to split view the same application such as Photos on my two screens? It would be useful to compare photos between them instead of dragging through the multiple photos every time.

  Thank you

  N °

• Having weird with poping problem square blocks of color at the top on my preview screen, and when I go.

  So I've had this problem for a few days now and he got me big time. I think it might be a small frame that needs to be changed, but I can't understand it.  Im having a weird problem with squares of color rasterized on my screen preview, and when I go hope upward. While the video only plays not my preview screen has this top model and when I return it does as well.

  Here's an example of what is happening:

  

  

  I have a lot of things that need to be changed, but I can't do anything. Please help if you can!

  Thank you

  Michael

  If you use El Capitan, see here:

  First graphic question Pro?

• keyboard arc shows the different character

  Hello

  I'm having the problem of the arc keyboard show different character even after I installed the driver. When I press on the following, it will show what follows below. Can someone advise me on this?

  Press SHIFT + 2 should show "instead, it's show @"

  Hello

  Did you do any hardware changes or software on your computer before this problem?

  It is the international keyboard layout in Windows XP. However, if you want to add a different keyboard layout, you can follow this link:

  To add a different keyboard layout or input method editor (IME)

  
  Reference: the use of the keyboard layout United International in Windows 7, Windows Vista and Windows XP?

  Hope the helps of information.

• How to show the IOM application instance account password in the user interface

  Hello

  I would like to see IOM application instance account password.

  In OPAM, there is a "show password" button.

  Is it possible to do the same thing in IOM? If so, how?

  TIA

  Leo

  Customized using managed beans sound possible, you can try something similar to the example below:

  IOM Managed Bean example: password reset custom

  http://oraclestack.blogspot.in/2014/12/OIM-managed-bean-example-custom.html

  Or if its requirement quite normal for all users, it must be visible, then you can create a new field in your form to process and fill in the application form as pop prerequisite. But this is not recommended.

  ~ J

• Show the different regions by clicking on the entries in the list

  Hello world
  
  I have a page with several regions, but I want to only show one at a time; I want you to show with a checklist. So, whenever I click on an entry in the list, I want to see a specific region and if a click on a second entry in the list, I want to see another. It must be without submitting the page (for different reasons).
  
  An example of I want to do is when you change an element in the APEX; You can see a list of buttons 'Show all', 'name', 'Displayed', 'Label', 'Settings', etc. Function of the key, you click, you will see a different region.
  
  I think it is a very sleek and elegant way to show a lot of information to users, if only I could apply it... any ideas? :)
  
  Thank you
  Elena.

  Elena.MTC wrote:

  I have a page with several regions, but I want to only show one at a time; I want you to show with a checklist. So, whenever I click on an entry in the list, I want to see a specific region and if a click on a second entry in the list, I want to see another. It must be without submitting the page (for different reasons).

  An example of I want to do is when you change an element in the APEX; You can see a list of buttons 'Show all', 'name', 'Displayed', 'Label', 'Settings', etc. Function of the key, you click, you will see a different region.

  I think it is a very sleek and elegant way to show a lot of information to users, if only I could apply it... any ideas? :)

  4.1 the best way to proceed is to use the integrated Region Selector display.

  After you have created the RDS, customization is necessary to display only one region at a time.

  1 hide the RDS "Show all" link (and change the second link to resemble the first) by adding this stylesheet in the header HTML page:

  2. by default, all regions will be displayed when the page is loaded. Hide others using dynamic Action to simulate a click on the first link in the region of the RDS and the first region:
  H4. When

  Event: Page load
  H4. Real Action

  Action: Run the JavaScript Code
  Fire on loading the Page: No.
  Code:

  $('.apex-rds-container li:first-child+li a').click()
  

  See this article to view region selector sticky if you want the value of the visible area to be preserved if the page is refreshed.