Delay when switching from another program return to first
If I pass away first to any other program, and then switch back to first there are about 10 seconds (with rotation beach ball) before I can use first. When I updated to 2015.3 the problem is gone for a day or if this time is back. I also installed a new SSD and installed OS X and first fresh from scratch and it always does.
Here is my system:
Mac Pro (mid-2012) 2 X 2.4 GHZ 6 - Core Intel Xeon
10.11.6 OS
40 GB OF RAM
1 TB PCI SSD drive
Graphics card: ATI Radeon HD 5770 1024 MB I will be upgrading this to the Titan X GTX (flashed to Mac) in a few days.
4-way RAID 0-16 to
3 USB drives connected to the 3rd party USB 3 PCI card
Thank you.
He solved. It was related to the audio. In the audio, I had the master clock set in. when I turned out the delay when switching to the first goes. Phew!
Tags: Premiere
Similar Questions
-
Cs6 Dreamweaver crashes when switching from design to live view
Cs6 Dreamweaver crashes when switching from design to live view
I'll try later, but I think I may have found the problem. It seems that the cs6 dreamweaver made two files confquration on the same day, but only about 4 hours out. This does not seem normal to me. Does anyone know why an expensive program like this would do that? Was it a mistake of the operator? I asked the woman who runs this program and she doesn't know anything about the configuration files. Here's what show folders > C:\Users\cyn\AppData\Roaming\Adobe\Dreamweaver CS6\en_US\confiquration, configuration-1
Post edited by: justbobm202
Can I please have an answer to the question first, config please
Post edited by: justbobm202
-
How to access a shared file on my RN212 NAS remotely from another program?
I've looked everywhere trying to find how to access a shared file on my RN212 NAS remotely from another program (kodi) on my iPhone 6 more remotely, away from home. I tried to FTP, UPnP, HTTP, etc. anything and it's driving me crazy! I run the program kodi from my phone for watching videos stored on my SIN, I have a router NightHawkR7000 and believe that I am fairly warned to get this figured out, but apparently not lol I have all the correct ports forwarded, but perhaps I'm missing a step somewhere. Any help on this would be much appreciated!
-
Images not showing Up when importing from another photographer catalog
I am an editor for a wedding photographer and I had this problem happens often, and I don't know what is the cause. I can see all the information behind the image, the ranking and if there is no previous editing on it, but the image itself is not displayed. The photographer sends on the catalogue, forecasting and intelligent preview. There are moments that all transfer perfectly and other times the images are not there.
We tried to delete everything on both ends and start making sure that everything is done correctly, but it still happens. I tried to discuss with the support, but they have not been able to help. Whenever this happens, I lose money because I can't be their editor. We have both the most recent LR so it's not the question.
How we are currently transferring Weddings:
She takes is export as catalog with preview and intelligent preview. Once it's she will post the three files (catalogue, smart overview and overview) on Dropbox and sends them on. When I get it, I download the catalog of smart zip preview and preview of the zip. Once downloaded, I extract the prediction and intelligent preview. Can I go to file > import from another catalog... I click on the catalog file and select choose. Sometimes it works and other times it does not.
What we're doing wrong?
OK, so after talking with Adobe on two different days, then post it here, I called Adobe and they set about 5 minutes. Here's what he once let him access my computer...
(1) closed LR
(2) he checked my monitor has been fixed by default sRGB as shown above.
(3) then it went to the folder and change the smart preview to a different name by putting .old to the end
(4) then instead of extracting the zip file it opens the zip file and copied the file and pasted with other files
(5) opened LR and images where it!
-
CC of Dreamweaver crashes when switching from mode code in design mode
I am a recent problem with a file that I am currently working. When I switch from code in the Dreamweaver design view crashes and requires a stop down. Other files seem to work without problem. That particular file has 3 files EdgeAnimation CC cascading which are selected by questions from the media. I can test the page online, but not in design or mode live view.
As your new page did not plant, which leads me to believe that you have critical errors or conflicts in your other pages.
Try to run your code through the W3C validation tools.
Also debug JavaScript.
JavaScript - http://www.jslint.com/
Nancy O.
-
Keep the dng or CR2 files when switching from Lightroom and Photoshop.
From Lightroom and Photoshop, how can I keep the dng or CR2 files. Now it changes the psd and when I return to Lightroom it removes options in the section of Calibration of the camera, so that while I have a choice (Adobe Standard/camera faithful), after returning from Photoshop file I have "Embedded." How can I keep the dng or CR2 files
Adding to the good advice of Alfred - a raw file cannot be registered as the other files.
Its only use is the basis for the creation of new files, which must be regular files, such as tiff, psd or jpg.
When you edit a raw file in Lightroom, it does not change the file, the changes are written to the catalog.
Optionally, save the changes in the form of metadata (xmp) sidecar files, or in the case of DNG in the file itself.
-
When you delete all of your files and empty trash your files have not been overwritten on the hard drive and lie by snoop suitable programs.
There was something that would make the digital paper shredding.Thank you for that.
-
Graphics card: AMD over-pants M5950
TV: Insignia NS-32L240A13
I recently bought a DisplayPort to HDMI Cable to connect my laptop (with the DisplayPort) on my HDTV (with HDMI port). When I have them hooked up and extended my screen on tv, everything went well in the beginning. The operating system showed my office on tv exactly as I expected. However, when I moved one of my windows above (Google Chrome to be precise) from my laptop to the TV, the size of the window to expand. Immediately, I thought it was a problem of resolution so I opened the AMD Catalyst Control Center to check the settings on my TV. He said that the format is standard 1080 p 60 (1920x1080@60Hz), exactly what I thought it should be. Then I noticed that when I go to detect screens and click on identify, the 2 big which is supposed to appear right in the middle of the screen appeared in the lower right of the screen. On this basis, I determined that the problem must be that my graphics card think my tv screen is bigger than it actually is. The first thing I did after has been updated of my Chipset drivers and graphics, but which has no effect. After the search of all the nooks and crannies of the Catalyst Control Center and try to find someone else on the internet with this specific problem, I couldn't find any way to get my windows to the right size and get 2 (from by clicking the button all identify) to appear in the center of the screen where it is supposed to be.
Some additional notes:
- In the screen resolution of Microsoft menu in the Control Panel, clicking on identify with my puts selected tv 2 in the Center where it should be, is only to Catalyst Control Center who gets hurt.
- I tried using a different TV, but he had the same problem.
- When I connect my laptop to my tv via a VGA cable, everything seems fine and has the correct size. (My VGA cable is only a few feet, so I have to buy a longer in order to to use;) I try to avoid this. And honestly, an HDMI DisplayPort connection / should work better than a VGA connection, anyway.)
If you have any ideas on how to fix this or if you would like more information, please let me know.
Thank you for your time.
Update:
I tried to get help from my friend with this and at one point during our investigation, we hung his laptop to the TV using a mini-hdmi to hdmi cable. We found that he had the same problem of sizing as me which begs the question, is simply how the hdmi connections are supposed to work? If so, it is very annoying and I expect there to be a setting somewhere to turn it off, but I can't seem to find it.
Well, I thought that the problem, and honestly I'm pretty embarrassed that I didn't understand it sooner. In the resolution of the screen control panel screen there is a link written as 'Make text and other items more or less '. That takes you to a page that has a setting for the size of all the items on the desktop with 3 smaller averages, options and more. Normally, I have this game to kids, but for some reason my DisplayPort output was the default setting of the support. I changed it to smaller and now everything looks the way I expect to. Hooray!
-
Access DMBS_Output from another PROGRAM into a STRING
I am new to using DBMS_SCHEDULER.
I have different procedures/packages using the "dbms_output.put_line' to store the logging information. Before the end of the procedure, I use a "send_mail (of, to, object, get_dbms_output) 'procedure to send this info to myself (coded hard to/from/under reserve)."
I have now created a STRING:-1 program (calculation procedure) > >-2 program (mail mode)... but the procedure of sending mail is writing a white because the get_dbms_output (I think) gets cleared between programs of the channel.
Is there a way to either have 1 program run two of the calculation procedure and process email OR access some programs-2 sort the dbms_output created during the program-1?
Jason
Oracle 10 g 2
Why not use a newspaper instead of dbms_output.put_line?
-
I guess the title says it all.
But to summarize.
I right click on a photo in Lightroom and Edit in PS.
Before this PS Update December 2, 2015 she would incorporate the photo in the PS as my default work workspace
Now it is default to 'Start' workspace not what I envisioned.
When you choose to photograph in the new (open) start any screen works OK
Figured out how Adobe should have done...
Go in Photoshop C:\Users\user-name\AppData\Roaming\Adobe\Adobe CC 2015\Adobe CC Photoshop 2015 Settings\WorkSpaces (modified) and copy your main workspace by default
e.g. copy My_Workspace.psw and paste it
C:\Program Files\Adobe\Adobe Photoshop 2015\Required\Workspaces CC. In this directory, remove Start.psw and rename My_Worksapce.psw to Start.psw
Remove Start.psw in the workspaces (modified) [see above] directory as well. PS will create a new one here.
Make sure that the two new features are selected in the General preferences in PS.
Now in Lightroom will change to PS, it starts in My_workspace as it used to. When I opened just PS it now starts in the workspace of beginning.
-
Get the error when switching from table
Hi allI'm moving my procedure table values but no luck. your help in this regard will be highly appreciated. Thanks in advance.
I created the following procedure:
-------------
CREATE OR REPLACE PROCEDURE send_coll
IS
TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;
v_dept_no c_dept_no: = c_dept_no();
BEGIN
SELECT DeptNo
TO COLLECT FEES IN BULK
IN v_dept_no
EMP;
END;
------------------------
Now, I want to spend all the values of v_dept_no to one of my name of the procedure as rec_coll that receives the value of v_dept_no and print the value against v_dept_no. for example:
When v_dept_no = 10 then print all empno against deptno 10 and so on...
I think I have to do something like below but no luck so far.
CREATE OR REPLACE PROCEDURE send_coll
IS
TYPE c_dept_no IS TABLE OF THE dept.deptno%TYPE;
v_dept_no c_dept_no: = c_dept_no();
BEGIN
SELECT DeptNo
TO COLLECT FEES IN BULK
IN v_dept_no
EMP;
I'm looping 1.v_dept_no
rec_coll (v_dept_no (i)); - call the rec_coll procedure and pass in the value
end loop;
end;
---------------
create another procedure that will receive the value for v_dept_no
------------
CREATE OR REPLACE PROCEDURE rec_coll (v_emp_no c_dept_no) - create collection with c_dept_no type
IS
BEGIN
I'm looping 1.v_emp_no.count
dbms_output.put_line (v_emp_no (i));
END loop;
END;
-----------
I get the error message to create these procedures and if someone help me so I really appreciate it. Thank you
Concerning
Shu
I would just write a single SELECT statement joining EMP and Dept. If this exercise is University (collections of learning PL/SQL types), then you can do something like that.
I used a PACKET to this implementation. Again, this is not how things are done in the real world.
SQL > create or replace package coll_pkg
2 as
3 type dept_no_tbl is table of the dept.deptno%type;
4
5 procedure rec_coll (p_dept_no in dept_no_tbl);
6 procedure send_coll;
7 end;
8.Package created.
SQL > show err
No errors.SQL > create or replace package body coll_pkg
2 as
3 procedure rec_coll (p_dept_no in dept_no_tbl)
4 is
5. start
6 because me in 1.p_dept_no.count
7 loop
8 d in)
9 select empno, ename
10 of PEM
11 where deptno = p_dept_no (i)
12 )
loop 13
14 dbms_output.put_line (p_dept_no (i) |) ':' || j.EmpNo | ':' || j.ename);
15 end loop;
16 end loop;
end 17;
18
procedure send_coll 19
20 is
21 l_dept_no dept_no_tbl: = dept_no_tbl();
start at 22
23 deptno select bulk collect into l_dept_no
24 of the Department;
25
26 rec_coll (l_dept_no);
27 end;
28 end;
29.Package body created.
SQL > show err
No errors.SQL > set serveroutput on
SQL > exec coll_pkg.send_coll
10:7782:CLARK
10:7839:KING
20:7369:SMITH
20:7566:JONES
20:7788:SCOTT
20:7876:ADAMS
30:7499:ALLEN
30:7521:WARD
30:7654:MARTIN
30:7698:BLAKE
30:7844:TURNERPL/SQL procedure successfully completed.
SQL >
-
CALCS list as "admin" when launched from another server
Hello
I find that when, from the point of view of the monitor in Essbase Console Sessions, when CalcScripts or administrative rules are executed by a user who is not connected directly to the server Essbase, these Calc scripts or business rules appears as if executed by the user "admin", rather than the reality of the user who was logged into the planning session.
Is this normal? Is it possible around this so that the real user appear as holding a calc rule or business in Session Monitor?
Concerning
MikeHello
If the business rules are executed planning then Yes you will see only the admin user executes the rules, because planning communicates with essbase using the admin user.
If you search for hbrlaunch.log which will have more details on the user that ran the rule.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Full screen YouTube lost when switching to another window mode
How can I save mode full screen in YouTube videos after swith to another window?
Looks like you can open a network stream in vlc https://www.youtube.com/watch?v=EFo7MvmFmJw or download it directly.
There is one add-on we shortcut Youtube VLC and if you add this you can add the path of the exe for vlc and right-click on any Youtube video to play in vlc locally.
https://addons.Mozilla.org/en-us/fire.../?src=search -
Windows crashed when switching from Windows 10
Original title: Windows 10
This is my story, gang...
A few months ago my Office worked on Windows 7. Then, the free update of Windows 10 has been offered. So, I did the upgrade.
After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7. I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system. This glitch has left me WITHOUT Windows operating system, be it...
Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it. There is therefore no way I can reinstall my old Windows 7 (because of problems product keys). And believe me, I tried. Having to buy a new copy of Windows is out of the question, at this time.
Suggestions? Everyone... ?
Thanks for your time!
This is my story, gang...
A few months ago my Office worked on Windows 7. Then, the free update of Windows 10 has been offered. So, I did the upgrade.
After a week or two, I decided that Windows 10 just wasn't for me and opted to return to Windows 7. I followed the quick screens (to make the transition) and during the process, Windows "crashed" and mucked up throughout the system. This glitch has left me WITHOUT Windows operating system, be it...
Oh and the kicker is, I had to replace the hard drive (in my desktop Dell) at least twice since I bought it. So no way I can reinstall my old Windows 7 (due to problems product keys). And believe me, I tried. Having to buy a new copy of Windows is out of the question, at this time.
Suggestions? Everyone... ?
Thanks for your time!
Hello
Do not understand what you mean by PK issues.
But your relocation options.
The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.
http://www.Microsoft.com/en-us/software-recovery
But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).
As you have licensed preinstalled OEM (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, IF they still have them available.
Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.
See you soon.
-
After you select an image in the library view, LR2015 frequently stops working when the "Develop" tab is selected. LR identifier at the top of the window, says "not responding". By pressing the "Close" button generates a Windows message "Adobe Photoshop Lightroom is no answer". I am running Windows 7 64 bit, with all updates.
Try to go to the preferences, tab performance and de-selection ' processor graphics user "Lightroom.
Maybe you are looking for
-
Is it possible to access the USB ports and a slot for card SDX?
Is it possible to access the USB ports and a slot for SDX card at the back of the iMac?
-
Error message "WindowsUpdate_00000646" "WindowsUpdate_dt000"
Hello Whenever I click to install update for "Windows Update" programs, it seems update 10 programs, then the following message appears: Code 646 Windows Update encountered an unknown error. Help, please. Its starting to drive me up the wall now. Th
-
Exception in the external code called by calling the library function node problem
Hello, I am a complete newbie in LabVIEW and need help. I have run tests of reliability and get this error about 2000 cycles. The code sends the digital output of a cylinder which operates the actuator downwards, he reads a signal of the thing I'm te
-
HP: HP 15-201ax (network controller)
Hi, I can't find the card driver wireless for my laptop to the official support page. Can someone give me the link to download? Really appreciate
-
My impression is incompatible. A sheet of paper is passed through and then the second sheet is printed on but it cuts off the top. The next time I try to print the same page, the first RSS leaf through with nothing printed on it and then the second