Delete the media center TV

Similar Questions

• Xbox 360 Media Center Extender loses the connection to the media center to Windows 7 after change of router

  I have a Windows 7 Media Center box, and an Xbox 360 that I use as an Extender.  The two connections to the same wired router.  Everything worked fine until I went on my old router (failed) and put in a WNDR4300.   After the new router has been installed, I didn't have the Extender work then, deleted from the media Center and re - he added.  It worked but after I shut off/started the xbox, no link.  It is repetitive: I can make a new connection, but then it didn't reconnect after reboot of the xbox.

  Check/change:

  -J' changed to a static IP xbox

  -There is no part 3 a / v or a firewall on the support center

  -L' on the media center network adapter is 'home '.

  -The network card on the media center * fact * show the xbox 360

  -The event log after the xbox is restarted shows:

  event ID 538: installation of media center extender does not like the Extender has been detected on the network, but for the Extender upnp search failed (timed out after 20000ms)

  -How long before it, I have found that the service IS running upnp device host (and set to auto)

  -J' checked 4300 router wndr and UPnP is enabled (advertising set to 30 minutes)

  question, any ideas what configuration will solve this problem?

  Hello

  I suggest to look and ask here:

  https://support.Xbox.com/en-us/browse/Xbox-360?XR=shellnav

  http://forums.Xbox.com/

  http://www.thegreenbutton.TV/forums/

  See you soon,.

  J

• Qosmio G20-111: after disk HARD changing the Media center does not work

  Hi, I have a WME Quosmio G20-111, after a hard drive, toshiba support center evolution (disc hard bone) in Italy has reinstalled the WME but whenever I try to use the Media Center pc crash and show me a white screen. After several phone call they told me that the problem is that they don't update quosmio drive drivers?
  I'm desperate, any suggestions?

  [email protected]

  Hello

  Well, as far as I know that the Qosmio Player has been installed on the partition hidden on the new laptop, but perhaps the ASP is not install this application after replacing HARD drive.

  But I do not understand why the missing Qosmio Player should have a bad influence on the media library? MC is a Microsoft program that is part of the Windows XP MCE. Player of Qosmio is an invention of Toshiba and should have nothing to do with the MCE.

  However, you can try to install the Qosmio Player and then try to recover the entire operating system with the recovery CD Toshiba original delivered.

  Maybe it helps.

• How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  online media, absent on the media library

  How to I put online media and program libuary on the Media Center, I have everything expect those two, they are absent

  Check the settings of language and the region under the Control Panel, make sure that it is there.

  You can also try a manual download by pressing 'Download now' tab under tasks > settings > General > automatic download in WMC options.

  Make sure that during this firewall or IPSec is does not interfere with the download.

  If the above does not help then run Setup again.

  [Tasks > settings > General > installation Windows Media Center > rerun him.]

  Make sure you have the latest version of Silverlight or Adobe Flash Player installed.

  S.Sengupta Media Center MVP

• Where do you buy the media center remote control?

  Where do you buy the media center remote control?

  Hi John,.

  What operating system is installed on your computer?

  You can buy the remote control for Windows Media Center of Windows Store:

  http://www.microsoftstore.com/store/msstore/en_US/list/CategoryID.50726100

  Reference: use a remote control with Windows Media Center

  Hope the helps of information.

• How to change for the Media Center guide download time?

  How can I change the Media Center program guide download time?  My computer comes out of hibernation to download data at 12:15 and to sit down again it idling (for several hours) until she was put into hibernation or stop.  There is a utility that will change in time, but time is always changed back to the time of 12: 00.  I guess MC changes the time of return.  Thanks in advance.

  Hello

  You can follow the links below and try the advice given to solve the problem.

  http://Windows.Microsoft.com/en-us/Windows-Vista/download-updated-Guide-listings-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-Guide-listings-for-use-in-Windows-Media-Center

  Choose the manual option down and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows XP Media Center 2005. The Media Center is missing. Help, please. Thank you...

  Windows XP Media Center 2005 will not open or load the file Media Center.  My computer does nothing but
  freeze the other programs.  The only way to close Media Center is to go to the Task Manager.

  Hello Beckymyers,

  Thank you for your message.  Let's try the following:
  Click "Start" > click "Run" > type cmd and press "Enter."
  At the command prompt, type the following entries and press "Enter" after each of them
  Regsvr32.exe atl.dll

  C:\WINDOWS\eHome\ehSched /unregServer

  C:\WINDOWS\eHome\ehSched/service

  C:\WINDOWS\eHome\ehRecvr /unregServer

  C:\WINDOWS\eHome\ehRecvr/service

  C:\WINDOWS\eHome\ehRec.exe /unregServer

  C:\WINDOWS\eHome\ehRec.exe/regserver

  C:\WINDOWS\eHome\ehmsas.exe /unregServer

  C:\WINDOWS\eHome\ehmsas.exe/regserver

  After you run these commands, restart your computer and test the Media Center.  Please let us know the result.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Static IP remote access for the media center

  I NMH410 work through a WRT610N router.   My ports are configured for static IP access.  Seems to just going through www.ciscomediahub.com does not work well for me.

  Can someone provide the 'exact' URL I would enter in order to access my media center?

  Documentation of assistance through Cisco shows: https://Wan_IP_Address but that doesn't seem to work.  The demand is just there and finally once outside.

  To everyone:

  Apparently, I discovered and corrected the problem that I had with 'Remote access' to my Media Hub.

  Somehow, there are two configurations of router that had to be done.  On two port forwarding configurations has been necessary and once allowed me to access the media center.

  It seems that my ISP has a 192.168.x.x address router that was different from the address of my router 192.168.x.x.  It is on the home router when I incoming and make changes to the information of port forwarding.  The fact that I was getting an error message indicating that I wasn't even reached my router alerted me to the fact that my ISP was blocking remote access.  In the end, that's where my problem was discovered.

  Translate:

  If you have problems to access your media "at a distance" pole through its IP address (and not by the cisco media center), make sure that you configure the ports of the router specified by your Internet provider address, as well as the ports of the router that you have on your network home.

  I have forwarded port 443 on the two addresses of router port, and I can now access my media hub remotely.  Now if I can't play videos remotely, I'll be set.  This leads to another problem that I'll send it in another thread.

  Thanks for the help and suggestions of each.

• White screen when I open the Media Center.

  Original title: Media Center white

  When I opened the Media Center, there is a white screen. I wouldn't change a thing and it has worked before. I have Vista 64 Home Premium.

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  The screen may be black or the menu screen may be unresponsive in Windows Media Center in Windows Vista.

  http://support.Microsoft.com/kb/935901/en-us

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• the media center on my xbox freezes when the invalid application "cannot start symaddin." How can I fix

  The media center app on my xbox 360 crashes when the application invalid "unable to launch symaddin" appears. How can I fix?

  Hi DaveHale,

  Check if Windows Media center computer is very well as expected?

  Method 1: I suggest to put the computer in a clean boot and check if still face you the problem of gel.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Method 2: Disable your antivirus/firewall software temporarily and check if it is the problem of gel.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Sure to soon after troubleshooting is performed.

  Method 3: try the steps from the following link:

  When you use online media in Windows Media Center Extender on a video game Xbox 360 system, Media Center closes
  http://support.Microsoft.com/kb/934542

  Additional information:
  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-setup/clear-system-cache

  Tips to troubleshoot installation with Windows Media Center Extenders (Applies to Windows Vista)
   http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders#section_1

  If the steps above fail, then I suggest you to post:
  http://forums.Xbox.com/xbox_forums/community/default.aspx

• I keep losing my connection to the Media Center on my D-Link DSM 750

  I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

  Hi Ghostrider457,

  Are a. When you facing this problem?

  B. you get errors?

  C. recent changes made on the computer?

  Method 1

  Try temporarily disabling the firewall/antivirus software and check if the problem persists.
  Turn on the firewall / antivirus after you check the status.

  Method 2: new user account

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try and tell us the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• How can I use the Media Center to watch video content on my smart TV

  Separated from this thread.

  How can I use the Media Center to watch live video content on my smart TV with Wifi. I couldn't find the instructions to do with Media Player, which I did not

  Separated from this thread.

  How can I use the Media Center to watch live video content on my smart TV with Wifi. I couldn't find the instructions to do with Media Player, which I did not

  do you mean WiFi Direct or WiDi (wireless display)? If WiDi, you need Intel WiDi software installed on a compatible computer.

  What brand of TV and the exact model? If you have Windows Media Center on your computer, you should have Windows Media Player. You can have it disabled in programs, but you can reactivate.

• Xbox 360 will not connect to the Media Center after that PC has been asleep

  My Xbox 360 connects to my Media Center as an Extender initially. When it works, it works very well. However, after my PC has spent time in a suspended state, it is at 75% chance that my Xbox won't be able to connect to the Media Center. Sometimes it will work, but more often it won't.

  Restart my PC will allow the Xbox to connect immediately, but this isn't an ideal solution. I wish I could have my PC of a suspended state wake and correctly connected to the Xbox media extender.

  Hello

  (1) did you make any changes before the show?

  (2) is the specific question when the computer wakes from sleep?

  This problem may occur when the power is suspended in the media extender. I would have you go through the articles that might be useful.

  Method 1: Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Method 2: Windows Media Center Extender: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Reference:

  Set up Windows Media Center on the Xbox 360 (Windows 7)

  http://support.Xbox.com/en-in/apps/Windows-Media-Center-on-Xbox-360/Windows-Media-Center-on-Xbox-360-Windows-7

  Let us know if that helps.