deleting a "bad image"_ ".

Similar Questions

• Receives RUNDll32.exe - error bad Image to start Windows XP.

  Original title: RUNDll32.exe - bad Image.

  At startup "Rundll.exe bad Image ' appears

  I found the file RUNDLL32 on the Windows XP Pro CD

  How can I replace the bad image version in my computer

  This is caused by viruses or other such pest that is already active on your computer, or which may have been badly removed (deleted without removing his boot entry).

  Run a Malwarebytes scan on your computer: http://www.malwarebytes.org/

  Clean your Temp files, parasites often hide in temporary locations.  CCleaner is a very good tool for the removal of temporary files: http://www.piriform.com/ccleaner

  Do NOT use the function of registration of Ccleaner cleaning, registry cleaners are next few completely useless and mostly they cause more harm than good, they have a fix for the non-existent problems, at best they do nothing to improve performance, and at worst, they cause problems that did not exist previously.

  John

• Mistakes of bad Image of Windows XP on startup

  Here is a list of the errors I receive at first upward:

  Rundll32.exe - Bad Image
  -application or DLL c:\WINDOWS\ilaqucad.dll is not a valid windows image. The text is the Setup disk.

  Rundll32.exe - bad Image
  -application or DLL C:\WINDOWS\abdsdmsg.dll is not a valid windows image. The text is the Setup disk.

  RUNDLL
  -module error loading specified ofqsi.dll not found

  RUNDLL
  -Error loading C:\WINDOWS\ilaqucad.dll
  %1 is not a valid WIn32app

  RUNDLL
  -Error loading c:\WINDOWS\abdsdmsg.dll
  %1 is not a valid Win32app

  Some of them are not pop up until I click OK on the previous errors.  I have no more of the Setup disk.

  What should I do?

  Part of the problem is if you configure the computer to start in a clean boot state, then things work OK (unlikely), there are no instructions that tell you what to do but then restore your computer to a normal state and which does not solve anything.

  Is that sort of thing pretty good work for you JoshB_2011 here?  Of course, this is not and he won't - ever.

  Is it supposed to be some kind of magic that happens when you start in a clean boot state, which makes all the problems disappear, then you go back to a normal state and all is well?

  To do something between these two things... and that's the "Troubleshooting" part... There is no included troubleshooting.

  I had read it all through (it may be not a good idea at first), then apply it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How to delete a backup image of the computer?

  Last week I had to format my hard drive of the PC (I won't go into details, but a certain SQL Server 2008 SP1 was the culprit).

  I reinstalled Windows Vista Ultimate 64-bit and spent 5 days to install my apps and all the updates of windows (SQL Server 2008 SP1, the exception ;-)).

  When I got the message saying that there is no update available, I made a full backup pc on my drive hard usb.

  A few hours later, Windows told me there was an update available: nothing less than Windows Vista SP1!

  So I downloaded the SP1 and installed.

  I didn't want to end up with two all backups of pc (I was sure that SP1 had produced changes to the massive file), so I deleted, from Windows Explorer, computer backup image file in my drive hard usb.

  When I ran "backup status and Configuration - backup of the computer", he said that, since there was already a complete pc upward in my drive hard usb (which is not true, I deleted it!), going to back up only new and changed files... I had no other choice, so I made the back up and found it was actually a partial upward (I can tell because the size of the backup, the original was almost 50 GB and the second one was 31 GB).

  I went on the MSDN forums and found I could do two things:

  (a) change the registry to remove all values full them pc backup keys.
  (b) format my USB HDD.

  I've done both. The second it took me almost all day today (copy + / 200 GB of my hard drive on my HDD to the PC, formatting the USB drive and copy back the +/-200 GB).

  When I tried to make my backup of the computer, it says "this computer has not been saved.

  I sighed and thought: "it was worthwhile, I will have as a backup of the computer!

  But no, it was not to be.

  When I arrived at the final stage before actually to support to the top of my pc, the program says "the backup can take up to 55 GB of disk space. "Because a previous backup until already exists... that the differences will be saved."

  It makes no sense at all... Did someone there with the knowledge of how to delete a backup image (for good) complete pc so a new (full, incremental) can be produced?

  I think that being able to add/remove the backup images is a core feature.

  Thank you for your help,

  Hi Sergio Torres,

  Sorry for the delay getting back to you.  I'll pass your program for better Assistant forum post since this is related to a set of program with Vista rather than a security/privacy issue.  We will track a little to the original problem that you can't get Windows backup to recognize the backup of the image has already been deleted and the need to create a new backup full rather than an incremental backup.  Feel free to correct me if I'm wrong.

  It's the MSDN article, you mentioned, correct?
  http://Channel9.msdn.com/posts/keithcombs/Windows-Vista-complete-PC-Backup-and-recovery/

  What you have done with success:
  1 / deleted the registry key related to Windows backup
  2 / use Disk Clean Up tool to remove the backup
  3 / appropriate and completely remove the WindowsImageBackup directory
  4 / format the USB all together.

  If you already completed these steps successfully, then the error will be with a setting in Windows that always store the old backup file list.  I found this suggestion in the newsgroup Vista, give it a shot to see how it goes.

  "Hi Tim,

  because the backup is deleted out of band - it is always saved in the backup catalog. This is because the application always displays the text that is incorrect.

  It will be first - come back to the full backup if the previous version is not available on the backup location. It is only the user interface that notifies badly as I mentioned above.

  If you want the application to forget * all * older backups - you can launch a high command prompt. type the command line-
  WBADMIN delete catalog.

  Let us know if this is enough to solve your problem,

  Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• LogonUI.exe - bad image, explorer.exe - bad image

  I receive many messages of error such as those listed in my title. The body of each message also said:
  "C:\progra~1\google\GOOGLE~1\GOEC62~1.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original installation media or the software support provider". Help! I don't know what that means! Something important might been accidentally deleted? Whenever I try to open anything I have tons of these messages of 'bad Image '. Everything still works well, according to me, but I would like to know how to solve this problem does not happen.

  I receive many messages of error such as those listed in my title. The body of each message also said:
  "C:\progra~1\google\GOOGLE~1\GOEC62~1.DLL is not designed to run on Windows or it contains an error. Try to install the program using the original installation media or the software support provider".

  This means that a Google program is corrupted. Uninstall all google software, then download and reinstall whatever the ones you need.
  I hope this helps.

• Unable to connect to the Windows Vista profile, receive the error message "logonui.exe - bad image".

  Original title: bad image Logonui.exe

  I have laptop Dell XPS M1530.  Last night when I tried to start the computer, it went through the movements until he got to the login screen.  Rather than get the profile to connect to, I got the error message following "logonui.exe - bad image.  C:\windows\winsxs\x86...\COMCTL32.dll is not designed to run on Windows or it contains an error. "When I click ok on the error message and wait for an another error message appears" logon.scr bad image. "  I tried to run the Startup Repair and restoration of the system without result.  I cannot lose the files on the hard drive, but have run out of ideas and options on how to solve this problem.  Someone at - he had this problem and managed to fix it?  I've exhausted the System Support of Dell, as they have failed to: "format the drive and restore to original state."  That is not an option right now.

  I went into the Commpand prompt and delete files that have been raised as errors.  When I rebooted, it came in fine.  I got the files I needd for backup and then rebuilt the system.

• Bad Image C:\PROGRA~1

  "When I click on something to open this rises,' 'the file name' - bad Image" "C:\PROGRA~1\Google\GOOGLE~1\GOEC62~1.DLL is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or support software provider. "When I click on 'OK' she goes and what I clicked on Monte. Thanks :)

  http://www.google.com.au/search?hl=en&source=HP&q=goec62%7E1.dll&aq=f&aqi=G3G-m2&AQL=&OQ=&gs_rfai=

  Read the info above from Google about it.

  It is not listed as Malware, but check it anyway:

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Logon UI.exe - bad Image

  Under Windows Vista 64 w / SP2 and AMD Turion coprocessor of graphics (preinstalled with HP Pavilion dv7-1245dx laptop.

  Without recent change of downloads of software or files, etc., my system suddenly won't start not at all, even in safe mode.

  I get an error box that says:

  UI.exe logon - Bad Image C:\Windows\WinSxS\amd 64_microsoft.windows.gdiplus_6595b64144ccf1df_1.0.6002.18005_none_56a37cbfb59b8501\gdiplus.dll is not designed to run on Windows or it contains an error.  Try to install the program using the original media, or contact the software provider or system administrator.

  This dll file is a windows system file. Of course I can't re - install, because 1. It installed and 2. I can't install anything because my computer does not start at the top.  Help, please.

  http://pcsupport.about.com/od/findbyerrormessage/a/GDIPlus-DLL-not-found-missing-error.htm

  Read the above info. Different error message, but it can give you an idea.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.
  Mick Murphy - Microsoft partner

• CS6 installed, but half of the programs do not open and give me an error message 'Bad Image'

  3 days ago, I installed CS6, opened the first time no problem, now it gives me an error called "Adobe Premiere Pro.exe - bad Image":

  C:\Windows\system32\MSVCP100.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  After that, I deleted CS6 completely from my computer and reinstalled it, after that I scanned for virussus. Still the error message is displayed.

  I use Windows 7.

  Manually install the MSVC 2010 runtime by downloading the correct version of Microsoft.

  Mylenium

• CS5.5 - Pages Delete Deletes always bad pages.

  Whenever I have delete pages, bad pages are deleted - not the ones I highlighted.

  For example, if I highlight the first 5 pages of a document of 20 pages, the last 5 pages will be removed.

  If I highlight the Middle 5 pages, the last 5 pages will be removed.

  InDesign 5.5 Gets the number of pages from the highest point, but always removes from the end of the document.

  I've deleted preferences, restarted ID, restarted Win7/64, but nothing doesn't this bizarre behavior.

  Any help would be greatly appreciated.

  Allen

  InDesign deletes the pages you selected, but if you have a text in threaded frames through tose pages yo are not to delete text. Pages and images are deleted, but the other pages are linked and the text flows through the new channel. You must highlight and delete the text from these pages as a separate step.

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• Satellite L755D - Webcam: very bad image quality?

  Hello @all,

  I have a SAT. 755 (OS: win7 64 bit). The webcam returns a very bad image quality and I noticed that the driver is from the year 2006 (Microsoft, Version 6.1.760.17514).

  I installied the last 'pilot' vom site of Toshiba (version 2.0.0.19), which actually just updated the CAM software.

  It is a fact, that this webcam is of very poor quality, or could someone please help me improve the photos, which are not only in poor Skype, but also when I just test the cam.

  Greetings from the Austria
  erkg1959

  Hello

  Please check the film in front of the lens is detached.
  I think that many models is delivered with a protective film in front of the goal and it is not too easy to do.

  See you soon!

  Tom

• The bad Image of Skype error

  Hello! I get the error of the bad image whenever I try to start Skype. I run dxdiag but everything works. The error that says:

  THE BAD IMAGE ERROR

  C:\Windows\SYSTEM32\sxs.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the vendor to softwar for support. 0xc0000006 error status

  and after that, I get the message "Runtime error 217 at 4 005283D"

  Does not work either. In any case, I've solved the problem! Solution: I reinstalled Windows 8.1 pro (seems to be the unique solution to the problems of windows)

• LABWINDOWS CVI 2013 error: bad image in IValidateImage

  Hello

  travel form CVI 2012 to CVI 2013 I Get a sequence of the below errors in the application log.

  The errors seems to be generated whenever I have fly over the screen of the GUI of my application. After a sequence of these errors the application hang.

  Note that:

  -J' already installed the latest patch available for 2013 CVI

  -l' error was not present when compiling with CVI 2012

  -l' error is present also, when you distribute the application o windows XP

  Thank you

  Ezio Riva

  ERROR in widows application log

  The description for event ID 0 in source CVI could not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  [15:24:52.119] [IValidateImage] [FATAL] [.. \mgsource\image.c:9085 assertion failure]: FALSE (bad image in IValidateImage)

  Hi calou,.

  Do you agree with the workaround solutions provided by Daniel?

• Bad Image error - igdumdim32.dll

  Igdumdim32.dll somehow got on my Windows 7 system. From what I can find, it is a dll for Windows 8. Get the error message: "C:\windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error...". "Very irritating and does not disrupt some features. What should I do?

  Let me describe the problem as completely as possible.

  Reads the 'error' message: "C:\Windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator... »

  The "error" message occurs repeatedly. It occurs when I try to open a video on Foxfire. It's entitled"FlashPlayerPlugin_15_0_0_223.exe - Bad Image. "When I click OK, the message reappears. It appears 3 times in total and after I clicked OK whenever the video runs correctly, but it won't go full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (titled qw.exe - bad Image), QuickTime Player (titled QuickTimePlayer.exe - bad Image), Garmin Express (titled Express.exe - bad image) and others. In all cases the message come up 3 times and once I clicked OK for everything the program runs normally.

  I tried to find igdumdim32 in windows\system32, but he's not here. There's an igdumdim64 it. However, I found in C:\Windows\System32\DriverStore\FileRepository\5.inf_a...etc. It is also in C:\Windows\SysWOW64.

  Just in case someone else looking at this, I finally corrected this problem.  If you're reading this, it probably means that you have the same problem.  There are dozens of this error of 'Bad Image' messages in this forum and in the Microsoft forum.

  I think that 'Image' is the idea here, but it took me a long time to understand that.

  By a very winding road, I finished on the Intel support site (a friend suggested this).  Here, you can download a utility to update the drive, I did.  When he was executed, he informed me that he thought that I have a graphics driver of custom provider and (thank you), I would be cautious about downloading a new driver on their part.  That is why I did not.  However, that me indicated that there could be a graphic driver problem.

  Then I remembered that during my many and varied travels through the internet read something on a "Recovery Manager" that HP installs in the product (once again, thank you very much).  HP customer care has to a set of instructions on how to use the tool on their website: (using Recovery Manager to restore the software and drivers (Windows 7).

  I ran the Manager and I replaced the drive of Intel graphics.  Problem solved.

  I hope this can be useful to others.