Dell A870P - 00 Poweredge T610 p.supply [MS]

Similar Questions

• configuration dell poweredge t610

  Hi all

  I hope you guys can help me with the following.

  I have this server in the office: dell poweredge t610.

  Configured with raid 5.

  Two of your hard drive has failed, so I replaced the. After the replacement, used windows. Boot. I installed a fresh installation of windows 2008, after a reboot once the installation is complete. I know that the following message:

  Uncompressing Linux... ok, booting the kernel.

  System initialization, please wait...

  To start replication, please insert your disk replication.

  Replication will begin once the system has started.

  I don't have a disk of replication.

  How can I solve this?

  "Missing only the drivers for interruption of system controller. can we all now who are these? »

  You must install the chipset:

  ftp.dell.com/.../INTEL_5500-5520-CHIPSET-SOFT_A03_R295077.exe

  "Also the program called to control the raids of the web?

  It's called OpenManage Server Administrator:

  ftp.dell.com/.../OM-SrvAdmin-Dell-Web-WIN-7.3.0-350_A00.exe

• Dell PowerEdge T610 and ESXi 4.0 integrated

  Hello world

  My company has just purchased a new Dell PowerEdge T610 as our first server VM. They bought exactly the same configuration that Dell recommended for virtualization, which came with an option to get the ESXi 4.0 embedded. By charging Dell about $ 2000 for the premium service when buying the ESXi, society has decided that we will install ESXi embedded ourselves (on a SD card or USB key).

  And so the task was given to me

  Now, here's the problem I encounter. I downloaded the ESXi 4.0 installable with customization of Dell, and it seems to work fine on a USB key. But I can't find the instructions on how to actually install the embedded and non ESXi 4.0 installable version. I have ESXi 4.0 installable on the stick, but how do I get the embedded installed on it (or SD card). I see that people have done with ESXi 3.5, but all it seems to be there on the net about installing ESXi embedded yourself is only how to install the installable on the USB. It's a stupid, and built-in question is nothing more then a installable on a USB?

  Sorry for a newbie question...

  Thank you very much in advance!

  André

  integrated, installable should be the same, the difference is that with the integrated option you would not need to install

  Jose Ruelas B

  http://aservir.WordPress.com

• Quotazione sostituzione band PowerEdge T610

  Salvo, few need di avere una quotazione by sostituzione dell' Unità Ribbon (Ultrium LTO 3) only sulla macchina PowerEdge T610 s/n: GCXQN4J

  Having anche aperto una request (n.937555878) a pagamento, my e stata inspiegabilmente chiusa, senza some feedback.

  Potete contattarci all' address email [email protected]

  Buongiorno,

  Può confermarmi che ha received it detailed?

  Grazie

  Todas

  Marco

• PowerEdge T610 Driver built-in Windows Server R2 2012 - Matrox graphics card?

  Hi, so I just upgraded our t610 server to windows server 2012 r2, but unfortunately I ran into a problem where the default driver for the graphics card is "Microsoft Basic Display Adapter."  I did some research and discovered that the graphic chipset embedded is a Matrox card, I tried several different adapter manual but with no. avail.  The reason why I'm trying to find the right driver is b/c the current detects properly the resolutions for all monitors that I connect to the server, so all the images on the screen are a little distorted.  Please can someone locate me a compatible driver for a manual installation?

  -Jay

  Slybrood7,

  The video driver is native support for R2 of 2012. Follow this link and try this update, if you have not already.

  Drivers Matrox - http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=08MVF&fileId=3337867393&osCode=MWS80&productCode=poweredge-t610&languageCode=EN&categoryId=VI

  Let me know how it goes.

• Guarantee extension request by PowerEdge T610

  Buongiorno,

  con the sound system presents a take UN preventivo by the di UN PowerEdge T610 della co extension.

  Codice client IT2721546

  Price made it 16/05/12

  Buongionro, sto contattando by mail.

• [EC] HD by PowerEdge T610

  Buongiorno.

  Abbiamo UN PowerEdge T610 in cui if e uno dei rotto 3 HD SAS da 146 GB in a RAID5 configuration a Seagate product ID ST3146356SS, e above servirebbe UN preventivo by he pezzo di ricambio.

  Grazie,

  Palomar S.p.A.

  Salve,

  This scusiamo per it remember.

  Se ha ancora need:

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi UN message privato.

  Nel caso in cui as aver need di assistenza telefonica is Pagaré a ticket di Assistenza.

  SE if need di una delle quotazione left in sostituzione can rates UN preventivo senza Pagaré the assistenza.

  By request, we have our o di need any it client codice di vecchia quotazione o.

  Nel caso in cui non his di queste information times need che compilasse i seguenti campi:

  -SERVICE TAG-

  By the spedizione:

  1. company name:

  2 address:

  3 City:

  4 Provincia:

  5 cap:

  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione (is different)

  1 nome società (is it client code):

  2 via:

  3 City:

  4 Provincia:

  Heading 5:

  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  7 partita IVA

  Speaking saluti

• Batteria PERC H700 Poweredge T610 [MS]

  Buongiorno

  avrei need by UN nostro recent batteria del PERC H700 integrated su UN PowerEdge T610 Service TAG

  avrei need di one ' offer is there prima possibile procedere con the price by.

  Grazie

  Massimiliano

  Buongiorno,

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:
  7 partita IVA

  Speaking saluti

  Manual

• PowerEdge T610 if no starts [MS]

  Buongiorno abbiamo no problema con UN Poweredge T610 serial number ,

  If e spento in corso della mattinata e non siamo più riusciti a riaccenderlo.

  Pensavo potesse essere a problema di side / Gruppo continuity my nulla di cio

  Ho che tell noticed he following message "not AVAILABLE in STANDBY.

  Ho gia made delle prove a tutto dictionary not go?

  Può essere a problema di scheda madre o pulsating accensione?

  In attesa di a vostro riscontro.

  Speaking saluti

  Buongiorno,

  preparo UN preventivo, prima try con preferisce i 2 alimentatori tramite corriere o directly intervento con manodopera con alimentatori, e motherboard e APB party not necessary vi will be rimborsate?

  Con passing it mouse sopra identifier c Supporto Dell'e the voce "private message", it could mandarmi come message privato di seguito required information?

  By the spedizione:
  1. company name:
  2 address:
  3 City:
  4 Provincia:
  5 cap:
  6 name/last name/number phone/e-mail del referent in loco:

  With the fatturazione
  1 nome società:
  2 via:
  3 City:
  4 Provincia:
  Heading 5:
  Name/last name/number 6 telephone/e-mail del referent by the fatturazione:

  Speaking saluti

  Manual

• PowerEdge T610 maximum RAM with single processor

  Hello

  I would like to know is Server PowerEdge T610 capable of supporting some 196 (12x16Go) GB of RAM with Intel Single Xeon E5645 2.40 GHz processor?

  Thank you.

  Kind regards

  Stanley

  Not a chance.

  The T610 supports 192 GB ONLY with the populous processors AND the latest version of the BIOS.  The reason is that the memory controller is on the processor, so if you have only one populated, while half of the slots in the system memory can be used - six locations associated with the populous processor.  With a single processor, 96GB (6x16Go) is the maximum.  More old BIOS do not support 16 GB DIMMS, so remember to update the BIOS (and other firmware system) BEFORE the update to any configuration using 16 GB DIMMS.

• PowerEdge T610 processor + memory issue

  PowerEdge T610 Processor + memory issue

  1. is it possible to insert two different processors in the CPU 1 and CPU 2 Socket?
  IM my case to 1 Socket CPU: Intel Xeon [email protected] and 2-socket CPU: Intel Xeon [email protected]

  2. each processor has its own memory controller.
  Is it possible to insert different DDR3 DIMM for each processor?
  In my case in CPU 1 - DIMM location: 3 x 16 GB in A1, A2, A3 and CPU 2 DIMM Slot bars: 3 x 4 GB in B1, B2, B3?

  N ° processors must be identical, and in page/Configuration memory must be the same for both.

• Dell PowerEdge T610 (memory upgrade)

  I bought Dell 16 GB certified replacement Memory Module for select Dell - 2Rx4 1333 MHz RDIMMS LV systems

  Currently, I have 8 GB of RAM (1 GB on every slot machines). After I installed this new memory and restart the server, it shows invalid memory configuration. So, I changed the memory setting in BIOS 'Advanced ECC' to 'optimize memory '. But it detects more than my current speed of the memory is 8 GB. Is there something wrong with the configuration of the memory? I tried to re - establish the new RAM.

  Help, please. Thank you.

  Hello.

  Your memory configuration is not valid because the channel memory CH0, is not balanced with channels CH1 & CH2. Refer to the schematic illustration below:

  

  In order to balance the memory on these channels, we should have memory DIMM in:

  A1, A2 & A3 = B1, B2 & B3 in addition also A4, A5 & A6 is B4, B5 & B6. That's why CH0, CH1 & CH2 memory modules must be identical for the performance and optimal memory configuration. Depending on the upgrade amount of memory you are looking for, you can buy 1 more 16 GB DIMMS and then fill in slots A1 B1 & offer a total capacity of 32 GB. This will provide more flexibility for future memory upgrade

  Let me know if you have any other questions.

• Upgrade memory Dell PowerEdge T610?

  Hi, I have a T610 with 8 GB (4 x 2G 2Rx8 PC3-8500R). I would put more than 8 GB, (4 x PC3-10600R 2 G 2Rx8). Works? What is the best setting?

  [of]

  Hello.

  How many processors you have installed?  There are several guidelines of population of memory including memory on all channels balanced for optimal performance.

  For a single processor, you will only be able to use six modules because of this limitation, where:

  A1, A4, A2A5, A3A6: 2GB with capacity of 12 GB total memory

  For the two processors:

  A1A4, A2A5 & B1B4, B2B5: 2GB gives the ability of memory of 16 GB. I advise to use strips of memory ability higher such as 4 GB, 8 GB, or even 16 GB because they offer memory expansion more and robust.

• PowerEdge 4600 - P.supply - request [MS]

  Dear Sirs

  We ask you to request a quote for n. 1 power supply DELL CN - or mod R0910; service tag is XXXXXXX

  Thanks in advance

  Kind regards

  Luca Francavilla

  Gentile GIS. Francavilla,

  Unfortunately the devo informare che abbiamo non più nessun ricambio available by it poweredge 4600.

  MI sorry

  Speaking saluti

  Manual

• Reference Dell 8700 and 460 Watt power supply: card of the highest Performance NVIDIA supported by Dell?

  What is the highest performance NVIDIA supported by Dell video card that you can put in a Dell 8700 using the stock 460 watt power supply? I put in a Geforce GT 640 in my 8700 for now but later want to upgrade without messing around with the upgrade of the power supply.

  Thank you.

  Hello

  'Officially', with the stock power supply, the GTX960 is the highest card, you can keep on XPS8700, 400W is enough for this card (will get mine installed tomorrow... MSI GTX960 games 4 GB).

  BUT, some people installed the GTX970, as well as a few model required PSU 500W min.

  It is the hope to allow you to take the "risk" or not.

  Remember to update your BIOS, first.

  And good read on the post, here on "XPS8700 and Nvidia GTX... »