DELL ALIENWARE AREA 51 ALX

Similar Questions

• Profile of Alienware Area - 51 ALX Intel XMP A10 does not work with DDR3 1600 MHz

  I bought three Kingston 8 GB RAM DDR3 1600 MHz 240 pin DIMM that totals up to 24 GB of RAM and install in my desktop computer. When I turned on and the message appeared saying:

  Maternal health and infant is running with DDR3 - 1333 MHz

  WARNING! Previous overclocking failed, and system restore its default value. Press F1 to continue, F2 to enter Setup Menu

  When I access the BIOS setting (version A10), I disabled XMP and then it went through fine after the reboot. However, I have to have XMP allow at any time? How can configure profile 1333 MHz to 1600 MHz XMP?

  What bothers me is that I had three former PIN of Kingston 4 GB RAM DDR3 1600 MHz 240 DIMM which total up to 12 GB of RAM and the XMP worked very well with them before they were 1600 MHz.

  The type of computer I have is:

  Alienware Area-51 ALX

  Intel Core i7 980 Extreme 6 c with 12 MB of Cache

  Windows 7 Ultimate

  Please, help me to solve this problem. Thank you.

  See this:

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19471694/20209913.aspx#20209913

  And I certainly don't have the answer, but I'll remember these points:

  1. I think that you can set manually nothing XMP adjustable (but with more control).

  2 machines often memory need to be slowed down when you are near maximum capacity look maintenance manuals.

  3 area-51 has never been tested or even allow the 8 GB DIMMs. You are in the new territories.

  4. If you really need 24 GB (and it works at 1333) then the 267 speed drop is insignificant.

• (Redirected) Dell Alienware Area 51 new model

  I bought a dell alienware are 51 desktop PC I just deliver on Friday.  I would like to add another 980 Nvidia gtx card to that, but the SLI bridge comes in 3 different sizes, short, medium and long.  What I want to know is which bridge of size I need.  I can't find an image of hard drive so I don't know if pci express ports side by side or y at - it a regular PCI between them.

  http://www.GeForce.com/hardware/technology/SLI/bridges

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Alienware Area 51 (ALX)

  Hello

  I have an Alienware Area 51. I think that's not the ALX, but I'm not sure. I have a few questions:

  1. the Dell website does not recognize my service tag when I he returned in product support, my tag is the NOTE from the ADMIN: maintain the label removed according to the rules of confidentiality > (generated by the system Dell detects)

  2. I think that my collar closed not automatic, but how can I be sure? I see that somewhere?

  3. the active ventilation does not work correctly. 2 fins are not going up, they get stuck after one or 2 centimeters. They go down in the normal way. How can I fix?

  Thanks in advance

  Remove the two side panel access doors. Remove your signs of topping top skinny black acrylic finish on both sides of the case so you can access to the fins, their hinges and screws. When you turn on, look to see what makes your 2 flippers paste. If you need to, "help" take off. Command center can open, active evacuation, have CC open the fins and close once or twice. Do test for bonding. Usually, it comes down to the torque of the screw end, or the torque of the screws of the trim panel. Unless of course you can see what is the cause of bind, as an obstacle.

  You can try back a little torque on the screws of the fin on the 2 fins that stick. Reinstall the screws to the appropriate if - couple when they return to normal. Retest w/Command Center, open/closed. If everything is fine, reinsert the finishing trim panels and reinstall the screws, but not too tight just yet. Repeat the test with the command center to open the closed fins. Usually, the screws from trim to finishing nearest you for what purpose clings is the culprit, then tighten or loosen based on the question whether one of these tips have helped. As long as the finishing pad screw is almost tight, it will keep the filling and not make the stick of fin...

  Basically, remove your doors case, remove the upper trim, power and go from there...

• Alienware Area 51 ALX difficult questions of car upgrade

  Hi all!  I have an area 51 alx from ~ 2010 with a card mother stock.  I'm looking to replace the disks accompanying with a Samsung 850 Evo SSD.  SSD SATA3 and I'm fairly certain that the parent stock on my machine has only SATA 2 correct slots? My question is what can I do so that I'm not headed by the limit of 300 MB/s, which comes with 2 SATA?  What are my options?  I am currently struggling to get CC working in another thread on this forum (can be a hardware problem) and so a card mother update isn't out of the question.

  I've added a section at the bottom of this post. Hope that helps or who gets at least help you get started in the right direction.

  http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19568143

• Upgrade options card Alienware Area 51 ALX graphics

  I searched through the forums in vain for what I hope it's a simple question.

  I have a 4 years, Area 51 ALX with dual AMD 6990 cards installed. However, AMD does not support these one more and the last set of drivers that they issued are not compatible with most of my games on Steam.

  So - I'm looking to replace those with newer nVidias.

  But - that are comaptible?

  Hello

  You can upgrade to GTX1060, 1070, 1080, Titan X PASCAL, among others; and since for the performance of dual AMD 6990 you should already have the 1200W PSU.

• Alienware Area 51 Tri SLI HELP

  So, I recently bought a Dell Alienware Area 51 with graphics cards from NVIDIA SLI 980 4 GB DDR5. I want to buy a 3rd 980 now directly from Dell. They don't tell me no problem but they don't sell Tri SLI bridges? It makes no sense at all? You are selling computers game, but if we want to add a video card you do not sell the bridge for her? I know that dell has them because you can set up a computer with them, with 3 graphics cards requiring this bridge. If they do not sell this bridge then I give them $600.00 for another purchase of the card. Makes no sense...

  I contacted Dell spare parts to the 1-800-289-3355 service. I could order the Tri SLI Bridge part # GYN70 (Assembly, graphics card, NV, bridge, Tri-State for $139.99). I also contacted a Support technique Alienware (not Dell) and after explaining my situation, they sent the cables needed to connect the extra GPU to supply free of charge. I hope this helps.

• How to reinstall a Windows 8 dell alienware aurora r4 to factory settings?

  A friend of mine had his PC scammed (guy calls, said you that they are Microsoft and you are infected, enter your PC and then you lock out and ask $ money to let you back in).

  Anyway, he has a PC Dell Alienware Aurora R4 (comes with) running Windows 8 or 8.1 - I don't know but I know that he has not improved/changed anything. The system came with a DVD resource (nothing else).

  Now all we want to do is to restore factory default, there is nothing about this of any importance to save...

  I looked on the internet and found what looks like the right solution:

  -Enter advanced service options (holding shift at the start), select "troubleshooting."
  > "Icon Dell Backup and Recovery" is missing (how could it be?

  Without that, I'm totally stuck...
  Any suggestions? Recommendations? Ideas?

  Thank you

  After that a clean installation of Windows and the drivers of Dell system, Dell backup and restoration facility will create a new recovery partition of your own installation that you can restore as new factory settings.

• Alienware area 51 25 fps...

  Hello

  Sorry for my bad English, I'm French,

  I have Ben Ali recently an Alienware Area 51 with 32 GB of Ram and 2 graphic cards Nvidia Gtx 960, I activated the SLI.

  I have a few games 400fps as League of legends/rocket League etc. in Ultra quality.

  But in other games like Rainbow Six seat or the forest, I need to be in the moderate to get 20-30 FPS... I have a monitor dell of 3840 x 2160...

  Can someone explain/help me why so I have less FPS?

  Thank you very much for your help,

  Antoine Bedaton

  The fps you get seems quite normal for this resolution with these cards as it turns be 4K resolution. Try to run games in 1920 X 1080?

• Area 51 ALX - does not start after the BIOS update - still in warranty

  I was preparing my Area 51 ALX for Windows 8 (pre-ordered and expect it to be here Friday) and decided to update the BIOS to the A10 A11. Back on and now it just sits here with no output monitor and my keyboard/mouse TactX™ is not illuminated either. Fans seem to be 100% / 70%. I tried to reset the CMOS and nothing. I'm just here? The office is still under warranty until next February, I believe. I am disgusted seriously now because I looked forward to Windows 8, "Painkiller hell &.

  "and to get some done coding. What a a day of . Don't know if this can help my case but I have been a customer for a long time from the time of Dell before. Had an old P2 Area 51, bought the m11x at launch and was still in talks with Ross Anthony to make a site of 'history' (although never, he eventually happen). I'm sure that set my m11x Win 8 will not work because it is stuck on super old graphics drivers. Can someone from Dell please help me here? Also, if I'm , is it possible to simply replace the motherboard myself? There are lots of tips on eBay.

  At this point, there is a strong chance that the motherboard is brick and needs to be replaced. Fact he complete the update of the BIOS and restart on its own, or force you the reboot?

• (Redirected) ALIENWARE AREA 51 AND GTX 1080

  hi, do you know if in the future there will be the opportunity to buy the Alienware Area 51 already with the GTX 1080 ? ( single double or triple )
  

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Restoring a area 51 ALX to its former glory.

  Well later I picked up a little uncommon Area-51 ALX chassis. It had been hacked on way more and I knew before I bought it.

  Ive got most of them back together and have to other desktops Alienware helped in this area.

  the only thing that I can't seen to find out what provision is ordered to hard disk platters in a side? When I had all 6 trays were missing and I took 6 nine trays. I looked through the user's guide and service manual and do not see anything that stands out who said what is the order. does anyone know what order they came from the factory?

  something else that I can't find a MIO to fan control cable. It seems to be elusive. Anyone know where I can get one to?

  

  Good evening. I don't have the time I can devote to see your start to finish to its former glory. Can I chip - in a pointer or two only. I'm familiar with this computer, but cannot make the connection between the words: MIO to fan control cable & whatever it is you have in mind you are looking to aqwire. On a side note, I moved information valuable swap in this pair of terminals:

  • ALX case Mod project
  • The ALX files: R1 A - 51 Mthrbrd Swap Asus 4770 k USB3.0 Cmnd Cntr

  We invite you to browse photos or find one of yours, post / report any cable you need & I may be able to direct you to obtain a. Or better, at least describe it. If not those below, help me help you...

• (Redirected) Add the second SSD to Alienware area 51 R2

  Hello, I recently bought a new Alienware Area 51 R2, currently I have a 128 GB SSD main + 2 TB storage config. I want to add an other SSD, capable of 256 GB. I want to start my games from there.

  My Question is, what would be the best solution for my needs? I see so many types of SSD out there and have little knowledge about the benefits and disadvantages of each.

  Best of this post in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• Alienware area 51 bumps on the edges of sewing?

  Hello, do all the alienware area 51 have little bumps very very small metal on the edges of the seams when there is a gap on the side where the two metal parts connect to form the handle? tied of arrows with what we talk about.

  

  Mine has no defects noted thereon. While I agree this is a minor flaw in your, you also have the right to complain and make use of your resources with Dell

• (Redirected) Upgrade of RAM for my Alienware Area 51 R2

  I need to upgrade RAM in my Alienware Area 51 R2 currently having DD4-2133 Non ECC RAM, 8 GB in 2 homes, 4 GB each in Total. My question is, can I use DDR4-2133 RAM ECC, 16 GB stick in the four locations, a total of 64 GB of RAM?

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.