Satellite Pro M30 won't start all of a sudden

Similar Questions

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Satellite Pro P200 won't start

  I have an old 1 week per Satellite Pro P200, it turns off when I was just in the start menu, so I was not doing something out of the norm (power cable is plugged). Since then it just won't turn.

  With the connected power cable I have an electric blue, power battery and light (although attempts to restart about 2 the battery light was red, but now blue). The drive light flashes for about 3 seconds each time I try to start and I can hear something happening inside the machine, but after only 3 seconds... nothing, completely dead.

  I tried to remove the battery, wait 20 minutes or more and none of it worked. Anyone have any ideas?

  Seems to be definitely a hardware problem... very bad :(
  Why you visit your dealer for new laptop and ask for Exchange.
  Maybe the dealer will exchange the laptop with a new.

  If this isn't the case, then you must contact the service provider authorized in your country for assistance.
  If you have purchased an extra service on the spot then the technician you will visit at home and will try to solve this problem.

  Good luck

• Satellite Pro A10 won't start HARD drive

  I have a Satellite Pro A10 that is not responding. If I have the connected HARD drive I get a ' insert System Disk... "message, I checked the HARD drive with a 2.5" USB connector in another computer and it seems OK.

  The laptop, I cannot change the boot order to select CD-Rom so that I can try the recovery disks. I can't get into the BIOS, but the Boot Priority option is not selectable.

  Any help appreciated.

  Especially this error message appears because the Middle starts not able.
  You insert a boot able CD?

  Try this: connect the computer laptop HARD drive to a USB adapter and try to format the whole HARD drive.
  Then put it in the laptop, insert the bootable CD and try to boot from the drive.
  As mentioned you could press the C button immediately after you start the laptop

• Satellite Pro 4600 won't start

  I have a Satellite Pro 4600 w / Win2000, 15 GB HD, CD-ROM, P3 800 Mhz, 128 MB of RAM. It will not start. I can plug in the power cable and the lights show the battery is loaded or loads, the power is connected. When I press the button I get no sound from the laptop (no fans or HARD drive) and there is nothing from the HARD disk (no light whatever it may be), but the "On" indicator light turns green even if nothing else happens. Someone at - it an idea what could be wrong with that, and if/how I could fix it?

  Thank you, Adrian

  Hi Adrien,.

  As a first step to diagnose your problem, I suggest you to unplug the unit from AC power and also remove the battery completely. Reconnect AC power and try to turn on the unit. If it works then stop it and reinstall the battery and try to turn on the unit again.

  If the procedure above does not solve your problem, then it is likely that there is a problem with the internal components of your laptop in which case you will need to be serviced by an authorized Service partner.

  Kind regards

• Satellite Pro 6100 won't start

  When I turn on my laptop, shows the toshiba start page, then the cursor blinks in the upper left corner then nothing.
  is this a virus?
  Anyone have any ideas?

  Hello

  I put t think that it s a virus. It seems you laptop cannot find a boot device.
  Is it possible to get into the BIOS?
  Please use the ESC key to enter the BIOS. There you can check if the HARD drive is properly recognized. Please also check the frequent priming.

• Satellite Pro L20 won't start on battery

  Hello
  I have a L20 sitting Pro and it wouldn't boot on battery; I need to plug in the area of work. It indicates the battery level is 88%. The laptop is less than a year old, so I don't think that there is a problem with the battery.

  Thank you.

  Maybe there is something wrong with the power of electronic power supply on the motherboard?
  You info, the guarantee must be valid. Then, immediately contact the Asp in your country and ask for the manipulation of the Fryer.

  Good luck

• Satellite Pro M30 and start USB HDD

  Hello everyone.

  Is it possible for a Satellite Pro M30 (Bios version 1.70) to boot via USB HDD?

  Thank you
  Vittorio

  Hello

  No, the upgrade of the BIOS will change any possibility of starting.

• Toshiba Satellite Pro M30 & Power Saver stop error

  Hello!

  I am struggling with this problem for months... the latest version of Eve on my toshiba satellite pro m30 running windows xp with service pack 1 installed gives a message box with an error message when the stop and I'm unable to eliminate this error. Unfortunately, I can't consider reinstall the system from scratch, because there are many other applications installed and I can't lose the settings for them. I read the forums and realized I'm not one of the problems with toshiba power saver. I'm even lucky to successfully at startup started it! Yet, it hangs at shutdown. It's pretty boring. also, I downloaded all the latest updates of this site for my laptop, including even the bios update.

  I would like the opportunity to be able to download the version without toshiba this site energy saving bug, and I'm sure many other people would appreciate the patch too!

  any comment on that?

  Andrew.

  Hello

  If your laptop is installed correctly it should work well. All the software has been tested. The only reason for your problem may be additional software that you have installed later.

  It is also possible that it may be caused by an Antivirus application. Maybe an application runs in the background? There are many reasons that may be responsible for this problem.

  If you reinstall your Notebook of recovery CD it will not work properly. It is very unjustifiable to write on some versions bug-free. I sometimes have problems with BONES, but almost always after using some freeware.

  Good bye

• How can I reset password BIOS on Satellite Pro M30?

  Hello!

  I have a portable Satellite Pro M30 and my son has changed my bios password and now I can't even start it! How can I reset the bios? Where is the bios battery out of MB, then reset as in desktop? Is there a jumper for the deal if all else fails? What should I try?

  Thank you all in advance.

  John.

  Hello John

  Remove the CMOS battery didn't help much. If the removal of the BIOS can be so easy, remove the password on the stolen units may be too simple. Please don? t wait that these information will be posted here.

  You can contact the after-sales Service of Toshiba partner. They will remove password for you.

  Good luck!

• Satellite Pro M30 - real time clock shows wrong time

  Hello!

  most of the time I am using my Toshiba satellite pro m30 without the battery with the energy of the power system. the battery is stored somewhere outside of the computer for a month the real time clock shows a bad time if the computer is started after a period of time.

  I think my cmos battery is going to die soon.

  someone has an idea, how this cmos battery can be changed by myself?

  Thank you
  Reinhard

  Hello Reinhard

  I agree with you. It is time to replace the CMOS battery. It is not easy and the machine must be dismantled. If you are not familiar with the procedure for disassembly, it can be dangerous. A small mistake can result with damaging material.

  If you want to do it alone, you do so at your own risk. Be sure to use the right battery. Maybe you won't believe, but if you use a battery hurt it could cause battery explosion, or other damage.

  I'm not 100% sure, but the RTC battery must be placed on the left side near the touch pad. If you want to only please be very gently. The laptop parts are very sensitive.

• Satellite Pro M30 graphics works not when the driver is installed

  Hi all

  I m having problems with my nvidia Geforce FX Go5200, in a portable Satellite Pro M30, (processor Intel Pentium M 1.7 GHz, 512 MB Ram). This card was working fine suddenly the laptop stops.

  I formatted the laptop and installed Win XP PRO. After installing the driver VGA, I restarted the laptop, but black screen started to come right after the Win XP splash screen appears. The laptop continues to start up but no screen.

  It starts fine in safe mode. I get my best screen simply by disabling the geforce card or uninstall the driver. I tried to install a new driver for the VGA on the download from Toshiba site, but same problem appears. I also tried the BIOS update but nothing happens.

  Can someone help me?
  [email protected]

  It's very strange question. It will be really interesting to know if this happens when you use the CD delivered recovery facilities.

  In any case, I assume that there is a problem with the LCD display. In safe mode, the desktop appears in the resolution decreases but the resolution to the OS boot will be suitable for a standard (1280 x 800), and of course, there is the problem.

  I am not a technician, but I recommend you contact the Service partner. AFAIK they use special tools and programs for display tests. They can tell you more.

• Satellite Pro M30: Computer does not enter standby mode

  Hi all

  I have a Satellite Pro M30...

  When my computer is in stand-by or is closed, the first keeps flashing orange led and it refuses to start. It reboots only when I unplug the connection and remove and replace the battery several times...

  Anyone knows what is the cause of this and what is the long-term solution?

  Longesson...

  Hello

  As far as I know the light glow orange or flashes while the battery is charging. If it of impossible to turn on the device while the battery is charging so in my opinion, there is something wrong with the electronic power to your laptop.
  You should contact the service partner for help.

  Good bye

• Satellite Pro m30: battery saver screen

  I have a satellite pro m30. with a Geforce x Go5200

  When I turn my laptop on its obscurity. I aways use power outlet. never just battery. I have to go in the setting every time I turn on. is the way to save all the settings

  Hi Dennis,

  Using the Toshiba power management or standard options of Microsoft?

  I would recommend the Toshiba utility, as this will allow you to set various options, including the brightness of the display.

  You should be able to set options for power supply and power of the battery of your choice, then save them so that they will be called automatically when you start your laptop.

  Power options are available from the control panel.

  HTH