Satellite P30 on wide column of 2 inches of the screen on the right side is black

Similar Questions

• Satellite Pro 6100: Office appears to be cut on the right side

  Hello

  My Office SP6100 seems to cut food on the right side. If I point with the mouse in this region, the desktop appears. I changed the rsulution display of 1024 * 768, everything, but still the same...

  Someone knows how to fix this?

  THX

  Stefan

  Hello

  Try to connect the external monitor to the computer and check if the same weird display behavior will be appears on the second monitor.
  If the same problem of screen appears on the external monitor, I presume that the malfunctioning of the graphics card!

  Have you tried updating the graphics card driver? Please do it! First remove the old version of the driver, and then install a newer version.

  I recommend using the Toshiba page display driver, but you can also check the drivers from the site www.omegadrivers.net or www.laptopvideo2go.com.

  Good luck

• Dialog box confirm boxes are too wide for the page and disappear on the right side in the sites we develop. It's new. How to fix?

  In Windows and Mac confirmation dialog boxes are open now too wide. It extends on the right side of the page and therefore mask the user action buttons. The site has no horizontal scroll bar.

  When you resize the browser window, the dialog box has scaled to the correct size. As website developers, how can we prevent what happens?

  May be this bug:

  • bug 686469 - tab-modal alert can extend beyond the browser window

  (please do not comment in bug reports)

• The right side on Satellite M70 151 is very hot

  I bought a Satellite M70-151 (17 March 2006). It's a very good computer but I have a problem: after about 10 minutes (depending on the application) the part of the right of the label «Designed to...» "and especially the portable speaker becomes hot enough. So hot that the left hand starts to the sweltering heat and work with the laptop is very clumsy. It's hotter than directly above the truck on the right side. I tried to influence with the energy-saving heat, but it did not work. The van is still on but this part of the laptop is still warming. Can anyone help?

  Thank you
  Jochen

  Post edited by: [email protected]_DE

  Hello Jochen

  I don't have this camera, but I guess on this disk space HARD is placed and it's because of the HARD disk activity. It is true of my camera, but I can leave with her because I use my laptop with external TFT and external keyboard.

  Like I said this is probably because of the HARD disk activity and you can try to change the HARD drive power settings in the power management.

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• How can I delete the column ad on the right side of the screen

  Hi Pete,.

  Forgive my ignorance, if my response is inadequate.  I use ' windows 7 'firefox' is my browser. This announcement. column is definitely in what I printed. I fills the right side of my screen.  The ads change but never disappear.  It is not a "pop-up" really frustrating.

  [Original title: Leo]

  LB

  If you mean by column ad in your e-mail (Hotmail/outlook.com), they are how MS is helping to defray the cost of the free system.  You can get rid of them by updating to version "without publicity", but if you the problem is only with printing, I suspect that you are (once again if it is Hotmail or outlook.com) print function uses is not the three suspension points (...), but rather by using the browsers.

  1. go to your Inbox

  2. Select the desired message you want to print

  Please select the three dots (...) next to categories

  4. click on print

  5. a preview of the message is displayed and also printing options. (don't forget to click on "all pages" for multi page email.)

  Just click print.

  Dyami & Wanikiya
  The zig - zag team

• the first two inches of my screen of firefox seems inadmissible is unable to click on the links or enter the scroll bar on the right side of the screen if it is at the top of two inches below the toolbar

  It seems that for some reason, I can't click on links, images or anything really in the top two inches of the screen of my internet browser, it seems like a "dead zone of all kinds."
  
  the toolbar is very good, and about two inches down on the screen, everything is sensitive.

  The extension of the Yahoo! toolbar reported that causes this problem.

  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  You can keep an eye on this thread:

  • [707748/forums/contributors/707748]

• I'm used to a column on the right side of the browser with all my favorites arranged vertically. It went all of a sudden

  Actually, I meant on the left side. I've just updated to Firefox 5 and the left vertical column with my favorites have disappeared. That's how I walk across the web. I can't find a way to put it back.

  {Ctrl + B}

• OE print cut 2 inches to the right on the first page

  OE6 in XP.  When printing, the right to 2 inches from the first page is cut off.  Checked margin setting in IE, they are all set to 0.75.

  Hello

  1. have you made changes on the computer recently?

  2. How is like print preview?

  3 is this problem limited to Microsoft Outlook Express?

  Method 1.
  Check if you can print successfully in the boot. Maybe there is a third party application that is causing the conflict.
  You need to perform a clean boot to find the program that is causing and then disable or remove.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2.
  Try the procedure described in the articles below and check.

  When you print an e-mail message in Office Outlook 2003 or Outlook Express, the printed message is so small that it is unreadable
  http://support.Microsoft.com/kb/932538

  List of fixes included in Windows XP Service Pack 3
  http://support.Microsoft.com/kb/946480

   Description of an update for the issues that are described in articles 898122, 898123, 898124, and 898125 with Outlook Express 6.0 running on Windows XP
  http://support.Microsoft.com/kb/900930

  I hope this helps.

• Display is shifted several inches to the right

  Then my son was playing on the computer, the screen suddenly changed so that there are about three inches of black on the left side. It's not all black on any other side. Also, part of what should be displayed is "off the edge" on the right. I tried to use the settings of the monitor, but it would shift the display only about half an inch.

  Hi Michelle,

  Try to restore the view settings of click Start-> settings-> Control Panel-> display-> settings-> move cursor at the lowest screen resolution, and then click ok. You can move the cursor to the necessary once the normal display is restored. You should also check under Advanced-> graphics Intel GMA-> and graphic properties.

  I hope this helps.

• The screen on the monitor HP slipped two inches to the right.

  The screen on my HP monitor display slipped to the right of two inches and an inch down off the screen, the screen remains empty. How I've seen to restore the correct alignment?

  Hello

  It should normally have an automatic reset on most monitors button to fix this problem.

  If that does not, you could ask the HP SupportForums.

  http://h30434.www3.HP.com/PSG/

• the CSS page model: the right side column width

  Hello APEX community,.

  We're stuck in some css stuff: we want to make a little bigger right column width (say, 300px) in the apex 5.0 page template "column on the right. Could someone tell how to do that? We have already copied the page template for editing, but we do not know what css class must edit and also where to put this information in. (in the model directly? in some clean css files?)

  Best regards

  Sebastian

  SebastianScholz wrote:

  Thanks for your answer, but with that, the problem is not completely resolved. You expand the menu actions, Yes, but the area in the middle of the page (Body) will be superimposed by the column of the action menu.

  I have attached a screenshot for better reference, as you can see that the Send button is partially hidden...

  Sorry, that I had no content in this part of the screen so did not notice that. There are a few other CSS rules that have twisted:

  .t-PageBody.js-rightExpanded.t-PageBody--hideLeft .t-Body-main {
    margin-right: 300px;
  }
  .t-PageBody.js-rightCollapsed .t-Body-actions {
    -webkit-transform: translate3d(300px, 0, 0);
    -ms-transform: translate(300px);
    transform: translate3d(300px, 0, 0);
  }
  #t_Body_actions {
    width: 300px;
  }
  

• Satellite SM30-604: 4.25 SpeedFan and question about the right temperature?

  SpeedFan 4.25 is on my Toshiba Satellite SM30 604.
  Until recently, the CPU usage shown was variable.
  Compared to a low percentage (green dots) to somewhere around maximum, according to what I was doing (I have never game, but use purely professional things like Word, Excel, PowerPoint and many websites).

  Temperatures in most of the green time, the high 40-links, the low 50-links (I then scroll to the top of the Speed01 of the fan from 0 to 50% and 50%, it starts to run). I sometimes add an external fan, I work sometimes in very hot climates).
  I have the readings of the time 4.
  Local temperature: 49 c (with this temp color varies between a Green V and a red arrow pointing upwards).
  Temp distance: 85 (with a flame)
  HC0: 26 c (with a green (V)
  Temp1: 86 (with a red flame).

  WHAT ARE THE TEMPERATURES IMPORTANT? WHAT IS LOCAL TIME? TEMP DISTANCE AND TEMP1?

  These very high temperatures, I've had for a day. The fan is working (I hear it, I can feel. "I can see, because I partly dismantled the laptop.) But the Speed01 is 0%, and there is no reaction on the adjustment upward. Or playback is 100% without reaction to setting down. And rotating or disable "auto fan speed has no effect.
  And without any other program running, the CPU usage increased a few seconds after switching on to 100%. I do not notice a significant slow down in the speed of my applications when I start using them. And a virus today scan did not reveal all the important things.
  I can't activate my taskbar more.

  Who has some answers for me. Green in this area?

  Thank you

  Hello Han

  Your ad is very nice and very interesting, but you'll be very happy if someone can explain all this because you are using a non-Toshiba software. It is always recommended to use the original software because software Toshiba designed has been tested and it can just to protect the hardware components.

  Use of software from third party is always at your own risk, and if you have any problems or questions, please contact their own support. They have much more experience with your applications.

  I can just tell you that you should be careful where your laptop is placed and make sure that the device can take a deep breath and cool down properly.

  Good luck!

• Implicit is column - I think about it the right way?

  My exploration of the implicit column is below. I would like to know if you think it's intended use.
  
  When the BI server sees a query where one Dimension is being constrained by another, you must choose a fact table containing references to these two dimensions. The "implicit fact column", which lies in the presentation layer of the RPD is used to guide the BI server to one or more fact tables that can be used to meet the demand. In the absence of the implicit column, I noticed that the BI server has been choosing random fact tables so I went to explore how this feature works. I set the implicit column in my presentation layer and then went looking for see how queries are generated.
  
  For my example, my two dimensions are program and channel. I want to see the list of channels available to a program. Without the of fact implicit column, queries are of the form:
  
  Select distinct T289. CHANNEL_NAME C1,
  T36001. Program name C2
  Of
  DIM_PROGRAMS T36001,
  DIM_CHANNELS T289,
  SomeRandomFactTable T41210
  where (T289. DIM_CHANNEL_KEY = T41210. DIM_CHANNEL_KEY and T36001. DIM_PROGRAM_KEY = T41210. DIM_PROGRAM_KEY)
  order by c1, c2
  
  The spotlight on this issue is that there is only one set of program / channel combinations returned. The downside is that the fact table that is chosen to solve the combinations can be any table actually within the jurisdiction of the BI server. It doesn't even have to be in the same domain where the program and the channel were chosen. When I put the column implied in fact, queries are of the form:
  
  Select distinct T289. CHANNEL_NAME C1,
  T36001. Program name C2,
  T35832. DIM_SITE_KEY / * this is the implicit column * /.
  Of
  DIM_PROGRAMS T36001,
  DIM_CHANNELS T289,
  AFactTableMappedToFactColumn T35832
  where (T289. DIM_CHANNEL_KEY = T35832. DIM_CHANNEL_KEY and T35832. DIM_PROGRAM_KEY = T36001. DIM_PROGRAM_KEY)
  order by c1, c2
  
  I was happy that I could predict what fact table has been used, but now the results are bad, I get a double set of records for each DIM_SITE_KEY / channel / program combination. I decided to play a little trick on the algebra. Knowing that the DIM_SITE_KEY has a numerical value, I set the implicit column referred as DIM_SITE_KEY / DIM_SITE_KEY which will always result in a value of 1. Now I get queries that look like:
  
  
  Select distinct T289. CHANNEL_NAME C1,
  T36001. Program name C2,
  T35832. DIM_SITE_KEY / nullif (T35832. DIM_SITE_KEY, 0) as c3
  Of
  DIM_PROGRAMS T36001,
  DIM_CHANNELS T289,
  AFactTableMappedToFactColumn T35832
  where (T289. DIM_CHANNEL_KEY = T35832. DIM_CHANNEL_KEY and T35832. DIM_PROGRAM_KEY = T36001. DIM_PROGRAM_KEY)
  order by c1, c2
  
  Since the DIM_SITE_KEY / DIM_SITE_KEY is always equal to 1, I get only a set of program / channel combinations. I get the added benefit of knowing what set of fact tables will be used to satisfy the query.

  Perfect analysis, but an important point is when you use the default fact table, always choose a measure (which has an aggregation) as a column made implicit. So this will enables the query will remove duplicate lines by a group by operation.

  Another point is to ensure that the performance is good. When we do not have a good model for the fact tables, the tables contains the large data set, make sure that the performance is good by indexes or caching to load guests.

  -Madan

• Re: Satellite P300-276: on the right side of the keyboard keys become numbers when NUM LOCK

  When I commit to NUM LOCK keys on the right the number keys on the main keyboard also become as well as on the numeric keypad on the right.
  I tried pressing Fn and NUM LOCK at the same time as on a not extended keyboard, but that makes no difference.

  I also tried different input languages and keyboard styles.
  I can't test with an external keyboard, because I do not have. I downgraded from vista to XP.
  I don't know if this makes a difference because I did not notice this after the downgrade.

  Any ideas?

  Hello

  Sorry, but I think I put t understand your question
  Made, it is whether the digital LOCKING is enabled (FN + F11) and buttons; U, I, O, J, K, L and M becomes to numbers:
  you 4
  I have 5
  O to 6
  J 1
  K to 2
  L 3
  M 0

  If you press FN + F11 again then the buttons must be on back letters...