Dell Hard Drive Diagnostics fix hard drive errors

My computer would stop working and say that I had a software problem.

When restarting it would run for about 15 minutes and the cessation of work and

show the same error.

I have run the Dell diagnostic program and it showed that I have several

Hard drive errors.

After the diagnosis my computer now works fine.

The diagnostic programs to correct the mistakes of hard dirve when he finds them.

My computer is a Dimension 4700 running windows XP Professional

Service Pack 3


Tags: Dell Drives

Similar Questions

  • Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

    My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    Hello

    This Dell 2000-0146 error code is for a failed hard drive / failed.

    You will need to replace and reinstall the operating system.

    Save your data as soon as POSSIBLE.

    See you soon.

  • hard drive error code

    My son has a laptop Inspiron 15 with a 500 GB SATA hard drive.   It's a little more of 2 years and is

    little used.

    Recently, it wouldn't boot into Windows.   I was able to run Dell built-in diagnostics and all tests passed,

    except for the hard drive.   Returned message says Error Code: 2000-0151; validation 19717; bad hard drive 3rd = status.

    Any ideas on this subject, other than replacing the hard drive?

    Thank you.

    dsmith8404

    Error code 2000-0151 refers to a failing hard drive / has failed, you will need to replace the hard drive with a new one.

    Bev.

  • Drive problem hard "smart hard disk error".

    Hello, about 6 months ago, I bought my HP envy m6-1252so, and since then it has been slow til to get totally stuck showing the "blue screen" error message, a month later, I turned on and showed me the message "no device found", then I went where I bought it and they said it was a software problem. That's why the guarantee would not fix because it takes that hardware problems (I have 3 years warranty). A friend, who is a maintenance-pc professional told me that the hard drive has problems and he screwed up, he has absolutely everything deleted hard disk ensuring that it would be totally free from virus and he reinstalled windows saying that I'm having the same problem soon, I had since re - install windows all almost 2 weeks because that the problem won't let me run windows showing me the message "error of. smart disc"and it could not connect to windows. My question is how could get my replacement of hard disk without having the same answer "it's a software problem?

    Sincerely, Milton.

    Milton,

    The "SMART Hard Disc Error' returned by your computer indicates that the hard disk has failed or is about to fail. Please see test of hardware failures (Windows 8) and/or test a hard drive in the BIOS for instructions on testing your computer for a hard disk failure. If the error codes are returned or a test does not complete, please contact the official HP support in your region / country, via the Portal to support HP worldwide, to file a warranty claim.

    You will need to use the HP recovery media, you created when you first set up your computer to restore the computer to a factory state after the hard drive has been replaced. If you create your personal HP recovery media, also contact HP support in your region / country, to see if the HP recovery support is available for your computer.

    If you have any other questions, feel free to ask.

    Please click the White Star of KUDOS to show your appreciation

  • HP Pavilion 15-n007sr: hard drive error

    My laptop HP Pavilion 15-n007sr fails to load Windows. I ran diagnostics and got an error. HP UEFI diagnostics for hard drive has failed in the short DST test with failure code rg817g-71s7gs-mfpwxf - t 60, 903. Does this mean I need to replace my hard drive?

    Hello

    Unfortunately, it's - the error code 24 characters for short drive Self Test (DST) would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • Start up and boot problem. Hard drive error. HP pavilion laptop Home Premium. Windows Vista preinstalled. No cd came with it.

    Nothing new added to comp. Got the hard drive error message and followed the instructions to fix/repair. All translations tried (almost every test suggested/memory/hard drive, etc.) could find NO problem with the memory or hard drive.  Once I have pass the problem to boot/start the computer works fine!   Crazy!  Any sugg. would be appreciated.

    Hello

    ·        Since when are you facing this problem?

    ·        What are the fix and repair that you tried to solve this problem?

    ·        Outside this disk verification error, do you get any other error message?

    Method 1:

    I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

    ·        Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

    ·        Click on continue or provide administrator credentials if prompted.

    ·        In the command prompt window, type the following text, and then press ENTER:

    ·        sfc/scannow

    ·        You should see the following message on the screen:

    § Begin the analysis of the system. This process will take time.

    § Beginning verification phase of system scan.

    ·        % Of verification complete.

    ·        Once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

    For more information, see the article mentioned below.

    http://support.Microsoft.com/kb/929833

     

    Method 2:

    I suggest you to set Chkdsk to run when the system restarts the next time. Follow the steps mentioned below to set Chkdsk to run when Windows Vista reboots the next time.

    a. click on start, then run.

    b. in open, type cmd, and then press ENTER.

    c. use one of the following procedures:

    Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

    Procedure 2: To repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

    Procedure 1: To run Chkdsk in read-only, at the command prompt, type chkdsk, and then press ENTER.

    Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

    a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

    Procedure 2: To repair errors, locate bad sectors and recover readable information, at the command prompt, type chkdsk volume: / r, and then press ENTER.

    Note: If one or more files on the hard disk are open, you will receive the following message is displayed:

    a. Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time the system restarts? (Y/N)

    b. Type O, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

    You can see the article mentioned below for assistance.

    Check your hard drive for errors

    http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

    Method 3:

    I suggest you to do a system restore. Follow the steps mentioned in the article below.

    What is system restore?

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    System Restore: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Hard drive error, but passes diagnostic

    I have a vostro 320 all in one computer. Yesterday he left initializing with a hard drive error, but when I run the hardware diagnostics all past. When I go into the installer the Bious does not see the hard drive. Current Bious is 1.2.0 and current is 1.4.0.

    If the BIOS does not see the hard drive, no - you will need to replace the disk.

    You can take a chance on the resettlement of the player (unplug the system and disconnect and reconnect the hard drive), but if so, it is not detected by the system, it is toast and needs to be replaced.

  • hard drive error message 1

    Whenever I turn on my laptop, a message appears that there is a problem with my hard drive.  I have prees F2 to get the Diagnostics utility and run the hard drive test. When I do I get this message

    hard drive error

    Failure ID: 90 c 633-6am70r-mfgk0k - 60 c 203

    Product ID: c2n26ua #aba

    Hello

    Error code 24 characters will be a Smart failure or disk Self Test - in both cases, this would indicate that hard is defective and must be replaced.

    If your laptop is still under warranty, contact HP and arrange for the disk replaced - you can check the status of your warranty here.

    If you live in the United States, contact HP here.

    If you are in another part of the world, begin here.

    If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

    Kind regards

    DP - K

  • Satellite L350 - persistent master hard drive errors

    I've known persistent main hard disk errors. Errors, in their first incarnation, were windows freeze at loading screens and screensavers, and then developed by stopping Windows to boot at all. It certainly would not start normally and sometimes would not start in safe mode. I used the recovery partition to restore the computer to its factory settings. A day or two later, the same symptoms began to manifest again, although not as severely. The hard drive errors, freeze on screens and loading screen savers.

    My question is: if I re - format the hard drive master, thus destroying the recovery partition, I could then just restore windows from a newly formed recovery CD? And, in addition, what is the probability that reformatting the drive hard completely would have an effect on the frequency of errors?
    If the hard drive is simply borked, format or not? And if yes, what is the next step?
    Could I restore windows on my drive hard slave and give up on the master?

    Thanks in advance.
    Mike

    Hey Buddy,

    Are you sure that all these problems related to the HARD drive at 100%? How did you check that?

    I don t mean it s not the HARD drive, theoretically, you could be right but before you think to change the HARD drive please use a diagnostic tool special for HDD as Drive Fitness Test:
    http://www.HitachiGST.com/support/downloads/#DFT

    This tool can check your HARD drive for bad sectors.

    If the HARD features of bad sectors disk, formatting will not help you because the sectors are physically damaged. With other words, the only chance is to exchange it.

    But if you have already used the recovery feature of HARD Toshiba drive to reinstall Windows you can say s that no problem of software and it must be hardware related. ;)

  • New drive HARD & OS errors-> HP 8000 Elite Small Form Factor PC

    New drive HARD & OS errors---> HP 8000 Elite Small Form Factor PC

    Can not install Win XP on another hard drive

    I work with a...
    HP Compaq 8000 Elite Small Form Factor PC

    Original SATA HDD is loaded with Windows 7 Pro.

    In order to install a program using this PC as a digital video recorder
    I installed the video capture PCI card and related software. I had problems
    associated with software and Windows 7.

    I know that the software works with Windows XP.
    Do not want to remove the original HDD, I tried my win7
    to replace the HARD drive and do a clean install of XP.

    I get the same error during the installation of the OS.  I tried different
    SATA and different XP install disks.

    The error I get is shown in this photo.

    Original HP HARD drive is a Hitachi 160 GB

    I tried 2 known to be good SATA drives.
    Seagate 500GB
    WD 80 GB

    I checked the bios settings and even revenue tio rear BIOS
    default settings.

    I get this error even with everything I tried to do.

    This happens during the OS install just after or during the process of the installation of temporary files are current

    written to the HD.

    When I re - install the original HD loaded with Win7, everything works as it
    expected.

    Any ideas on what] s going on here?

    Hello:

    The problem is that you must incorporate the necessary sata ahci drivers for windows XP to see the hard drive.

    Has Windows 7 and XP is too old an operating system to make them.

    Read the info at the link below, section of Intel and then read the downloadable PDF document for instructions on how to integrate all the drivers.

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

    The only other way to install XP on this model is to go into the bios, the storage section and change the setting of sata ahci to ide emulation, save the setting here and once again, when you go out.

    The problem is that if you do this, you cannot change the setting for the preferred setting of DCIS, unless you know how to install the correct ahci sata driver after installing XP from the controller.  If you try to just change the setting back on ahci without having to install the controller driver, the PC does not start upward.

    Try "slipstreaming" the drivers first and if you can't swing, install XP in IDE mode and I'll help you get the drivers installed, so you can change the BIOS to ahci setting.

  • Hard drive error, does not start.

    Computer does not start. I get this failure code:
    Rw1xtw-7ax87b-mfpv6k-619403

    Can't find any information on this subject, can someone shed some light on this subject for me?

    Hello

    It decodes for hard drive error 305 or the hard drive has failed, you will need to get the replaced hard drive and reinstall the OS and have a Fresh start, note that all your data is saved on the hard drive will be lost.

  • Laptop HP 2000: hard drive error

    Hello
    I have upgraded to Windows 10 one a few days ago and then yesterday when I went to turn on my computer it says this.

    Hard drive error
    Please run the hard drive Test in the diagnostic system
    Hard disk 3 (3F1)

    I ran the test drive and that's what he said

    Smart check: PAST
    DST short: FAILURE

    Help, please!

    You will need to replace the hard drive. Update to Windows 10 had nothing to do with it. After the back if you want to help find a car and its installation and reinstallation of Windows. If your Windows 10 appeared as it is activated, you can do a clean reinstall of Windows 10.

  • Hard drive error screen

    I own a HP Pavilion DV6 - 6160ev. Although I run the hard drive Test and pass the three tests (SMART Check, DST DST short and long), the hard disk error screen keeps coming back. What could be the problem?

    Thank you

    Panagiotis

    Hi @pankokkoris ,

    Welcome to the HP Forums!

    This is a great place to find answers and information!

    You have the best experience in the HP forum, I would like to draw your attention on the HP Forums Guide Learn how Post and more

    I understand that you have run the hard drive test and all 3 have passed, but you still receive an error of hard disk.

    What is the error you get?

    Have you tried to change the connection cable of the hard disk as that could go wrong?

    What operating system do you use?

  • can model the d9085t except dell hard drive

    Can model D9085T except dell hard drive?

    Hello:

    If the Dell hard drive is an IDE hard drive and probably no more than 80 GB, it should work in your HP Brio, but you will need to reload your operating system.

    Paul

  • Driver hard disk error

    Hello!

    It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

    It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

    What could be the cause of the error of driver?

    Hello!

    It is not a hard drive error, that I don't know hard disk is in perfect condition according to CHKDSK.

    It is just a minor nuisance under the settings of PC peripheral hard drive WDC WD300HLFS is, show with a rather alarming message pilot error below. So I assumed that there is a problem with the installed driver. I went to the Device Manager and find the hard drive. Here, it is declared as this device does not work correctly.

    What could be the cause of the error of driver?

    laptop / pc comes sometimes with new hard drive controller drivers... go to the manufacturing site and check if the additional disk is available and if it is available, try to install that

Maybe you are looking for

  • How to check the virus.

    I use a MacBook Pro with OS X 10.8.5. After recently browsing some sites on Safari now I intermittently get laughter and sounds of doors opening and closing in the background for a few seconds at a time. I can't figure out why. It must be a virus, bu

  • cDAQ cannot do several analog readings

    I'm a bit confused with the tasks and the cDaq chassis.  I work with technical support ON this, but I am against a delay.  Does anyone know what I'm doing wrong here? Kyle LabView silly!

  • When I open the Task Manager and select "Show processes from all users" there are 2 files virus csrss.exe?

    original title: virus csrss.exe? I use Vista Home Premium.  When I open the Task Manager and select "Show processes from all users" there are 2 files csrss.exe.  I learned that this indicates that I was infected by a virus.  Is this the case?

  • R710 - migration Perc 6 / i of H700i

    I guess it's a migration path taken in charge, but I try to find documentation on the exact process and have failed so far.  I've seen comments about the other controllers (i.e. Perc 6i/R for a H700) stating that import a RAID with OS only is not sup

  • RV120W - cannot access static IP via VPN devices

    Hello I have a RV120W used to provide VPN access to several industrial devices. Some of these devices are assigned via DHCP from the router IP address. Can not do DHCP, so there a self-determined static IP. The VPN works well for all devices that are