Dell ke Board issue

Similar Questions

• Registration in Dell Inspiron 3520 issue

  I have a Dell Inspiron 3520. I want to create a video tutorial, but everytime I try to record using any software, audio is not recorded. I updated the drivers for Cirrus Logic Audio high definition, but the problem is still not resolved. I have Windows 7 Professional 32 - bit operating system. I am not able to understand where the problem lies. If someone could help to solve my problem, I would be very grateful.

  check all your microphones if several are listed. But it seems not mic need to be turned on (by recording in audacity, for example) to see some of the Green volume bar activated

• (Redirected) Ink printer Dell V525 wireless issues

  Just bought a black cartridge directly from Dell for this printer. The printer indicates now that the ink cartridge is installed and it is full; However, when I print nothing appears. Vaguely color ink will appear with a small trace of black ink in the details then anything. I tried then to print only a copy of my resume since it's only black and white and nothing appears on the paper. I removed the cartridge and shook slightly to make sure that there is no ink (once again the printer registers a full cartridge) and ink comes out. What is going on? What should I do? I had more problems with this printer that the printer is worth. He really never worked when he wanted to. I contacted Dell cares and support at the other end only repeated my words to me concerned are never offering a solution. What kind of support does?

  Hi Lmurphy56,

  Please repost this in the printers for faster assistance forum.

  http://en.community.Dell.com/support-forums/peripherals/f/3528.aspx

• (Redirected) Place 11 pro Dell power supply issue

  Hi supports,

  I recently have a problem, when the machine come sleep automatically or press the power button a times, the machine doesn't have to wake up. Pressing once, machine vibrating, pressing home page, it vibrates too, but does not not in the following seconds.

  Pressing the power button for the other 3 seconds it vibrates, I think that it is a power on action, but it takes about 20 seconds to the account indicated by the dell logo, compared with 2-3 seconds before. It will then start normally, just Can not sleep.

  When I go into Device Manager, it shows an exclamation point on the management engine intel, showing a status_device_power_failure error. See my screen below Cap

  

  I have updated my machine, can not help

  I ran the diagnostic test at the start, no problem

  I format and reinstall a new 8.1 victory, still a problem

  installed the latest firmware, bios, drivers shown on the dell support page, no luck.

  management engine intel installed provided by intel, does not work neither.

  Seems this product only is not supported in my region (HK) yet, I can't find any local support to help me.

  Help, please. Thank you ~ ~ ~

  Hi heeae,

  Please repost this in the mobile forum for faster assistance.

  http://en.community.Dell.com/support-forums/mobile-devices/

• DELL OPTIPLEX 380 ISSUE

  Hello world

  I ran Diagnostics on my desktop optiplex 380 almost testing showed happened, but the problem is not resolved so far. I get the message on the screen when I try to run the computer that "TFGHT is compressed - press Ctrl + Alt + Del to restart." I have made this statement but the computer does not all means for desktop. It goes short window on the desktop. Can someone help me with this question, I'll have on Optiplex 380?

  Thank you all

  Noa

  See if this help.

• Dell Tablet 7840 issue

  first of all, I bought this tablet January in 2015.

  I found this unit turns off by itself at 22% battery while it helps (about a month) and now it shuts down to 37% and more.

  in order to turn on, I need to plug.  If not, there is no way to run.

  In addition, one of my knowledge that the same problem has happened since subsequently used this tablet about six months ago. (so he did factory reset, but its still the same today.)  I guess that this tablet has technical difficulties.

  I am living in Korea and asked for a chat on the official website of dell service, but they just gave me a number of international appeal.  You would not solve this problem.

  June Park,

  Click on the link below for the phone number of support in Korea. It's US based Forum.

  http://Dell.to/2hn6Ugw

• Display in Chrome and Firefox, no problem on Board issues. Help?

  I have published a draft and uploaded to our server, when I run it I get this:

  

  It should look like this:

  

  Any ideas on where to start to deal with this? This is the first time I've ever had to tell a client to open something in IE...

  And you're not seeing errors in Chrome or Firefox according to fix the noteOn?

  Furthermore, as well as change the noteOn and noteOff, you must also replace webkitAudioContext in AudioContext; You can use the monkeypatch to take care of any problems with the audio.

  I also have unminify the CPXHRLoader.js, get rid of some errors.

  Can you remove this background and see if it is causing the problem.

• I installed Windows 7 and when I tried to register, he came to indicating the product key is not valid. I bought the Dell product so I now the program's legacy.

  Windows 7 was installed about 2 weeks ago
  I can not register the product
  error message indicating the product key is not valid

  Please contact Dell about this issue. TaurArian [MVP] 2005-2010 - Update Services

• No sound on Dell Optiplex gx270s with Windows Vista

  Computer: Dell Optiplex gx270s

  operating system: Windows Vista

  I have no sound on my computer. In the taskbar next to the clock, I have a small red dot with a white cross, which tells me that she is mute.  Tried a list of solutions, but so far, nothing seems to help.

  I tried many things like

  Discover http://windows.microsoft.com/en-us/windows-vista/Tips-for-fixing-common-sound-problems

  did not work

  I tried searching audio drivers in dell.com and could not find the necessary driver because he was not the choice of the operator system of Windows Vista for drivers it were not compatible.

  Well, if anyone can help me I would really appreciate it.

  Thank you!

  http://support.Dell.com/support/downloads/DriversList.aspx?c=us&l=en&s=Gen&ServiceTag=&SystemID=PLX_PNT_CEL_GX270&OS=WW1&OSL=en&CATID=&impid

  Above is the link to Dell for your computer model.

  As you can see that Dell does not have Vista drivers for, according to their Web site.

  You will need to contact Dell about this issue because they provide drivers for your computer:

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  See you soon.

  Mick Murphy - Microsoft partner

• trying to restore my dell 1520. "repair your computer" option is not available on the «Advanced Start menu»

  I have an Inspiron 1520 running Windows vista. I'm doing a restore of the entire system, instructions on the Dells Web site that press "F8" at startup. It is no problem, Advanced Start menu opens, and then its saying to select "Repair computer". That's the question, 'repair your computer' is not where to find them. I tried several times to contact Dell about this issue. They tell me when I chat online to call, when I call they want to charge me for technical support because my laptop is out of warranty. Please help, I need to have my laptop works properly again for work or school.

  Thank you
  Dan

  Hi Dan,.

  ·         You try to perform a factory restore?

  ·         Is there any disk Vista Installation Dell provided with the laptop?

  I suggest you use the boot record and check.

   

  If this is not the case, this option is to contact Dell for assistance.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_336966&isLegacy=true

   

  I hope this helps.

• best upgrade processor for Dell Optiplex GX620

  Hello

  What is the fastest processor intel core 2, I can buy for my dell optiplex gx620?
  It has a pentium 4 2.8 ghz LGA775 socket

  I've heard of bieng capped at 800 mhz fsb and I was also wondering if I could buy a dell optiplex Board that supports intel core 2 processor or if there is a way to Flash the BIOS for this

  concerning

  Ash

  The GX620 does not support processors. The chipset could theoretically make some of the low end, but the bios should recognize the processor and then more or less allows dajuster the voltage supplied to the CPU motherboard.

  The best you can get is a Pentium D I think. The first Optiplex with main support was the 745 if my memory serves.

• Place 11 Pro 7130 i3 (model no-VPro) connected ongoing sleep issues again?

  Hello

  I noticed that despite a number of improvements with the last firmware panel touch (the rare involuntary repetition of letters) and still a problem of firmware (no more wifi from the A13 firmware problem) device always on my 11 venue Pro model i3: during sleep sessions connected excessive battery drain.

  What happens is that, after leaving the appliance for 8 hours (overnight) connected standby battery has already drained almost 50%, which, as far as I understand, is much higher than that should be the case, while often after the awakening of the device, I found that another application may have open or some kind of parasite entries occurred.

  For now I've worked around the issue by disabling connected standby mode of the registry, which has the additional advantage of allowing hybernation in the stop menu. This, however, is a suboptimal solution because it seems necessary to either press the Windows logo on the chassis of tablets and THEN press the power button for a good second to wake up the unit, or with the keyboard connected, it is necessary to close the Tablet and re - open, followed by the same press the power button.

  Given that I seem to not be the only one with this problem and the lack of software updates for the device-specific over the past months, I would ask Dell if these issues of connected intelligence are still studied on the 7130 with a possible solution to come in the form of firmware updates or otherwise , or if attention was completely shifted to the model with processor Broadwell followed 7140.

  Update for the people of the future: using this version of the SD card reader driver seems to fix the problem, which should have returned to a default restart driver driver specified on the support of the 11 Pro place Web site must be installed in Windows.

• U2414H Rev. A01 Power Saving issue, use CCC V13.251

  This is by far the worst monitor I've ever bought. After reading all of the horrible experience, everyone crossed now all make sense. The monitor doesn't come with a mini dp to dp cable, and to my surprise, it is absolutely useless. I spent all night trying to make it work, and he always stuck on the energy saving mode and even with HDMI. After fighting with him for hours, finally got it work less than 24 hours, I reboot and once, with dp cable it is stuck in power saving mode. It is absolutely rubbish! It's incredible that Dell continues to sell such shameful product and pretend that the problem does not exist. I would like an answer from Dell or anyone affiliated with Dell regarding this issue. This is very unacceptable!

  I managed to solve the problem myself, for now. Sorry to act on impulse and be rude about the situation. And the monitor has not buy directly from Dell, I bought it from an authorized dealer.

  After days of DIY autour with it, I think it's the problems driver GPU. My current setup is Windows 7 Pro with Sapphire Radeon R9 280 OC with Boost and ran on CCC V14.44, and it gave me so much trouble then. I decided to connect the monitor to a Radeon 7850 GPU with CCC V13.1 and it works beautifully.  Then it made me think back on the driver for the possible vesrion earlier. And low and behold... DP now works without problem. Now I'm under V13.251 CCC of Sapphire. For those who use the same problem as me, try using the driver that is shipped with the GPU, GPU AMD it just might work for you, because it worked for me.

  And since I can't take my rudeness, I'm sorry to be so hasty on my end and blame everything on Dell. I will definitely buy a couple more this monitor, as is a large monitor to research.

• 2305 Dell does not

  I experienced the same problem as many others.  My 2305 all-in-one will become unresponsive after coming in energy saving mode.  The screen remains dark; move the mouse/keyboard or touch screen do not wake the PC upwards.  When he is in this State, rest the power led turns on with a bluish white color.  I can not remote in the PC either.  It is totally insensitive.  It requires a cycle of forced feeding to get the PC working again.  This problem is random, occurring about once every 2 weeks on different days of the week.  Sometimes the PC suddenly turn off while being used actively.  I'm not sure that the 2 problems are related.

  I bought the PC in November 2011.  The problems started a few weeks after the purchase.  DELL has replaced the motherboard and the CPU fan.  DELL told me run diagnostics several times; they always spend.  I even reinstalled the operating system (not recovery partition, but ground up).  The problem persists.  The technician who replaced the motherboard tells that he gets many calls from service on this model of DELL, still very few appeals on the model of the next generation.

  I'm unhappy with the attitude of DELL about this issue.  They seem not to care or admit that this model 2305 seems to be more than a beta machine.  I'm not as confident with DELL that I used to be.

  Have you ever used the hardware power button to wake the computer after Hibernation and hybrid sleep? A short press of the power button is necessary to wake a computer win 7 hibernation when a touch, the touch screen or the movement of the mouse does not work. Try that next time is not wake up easily. Of course, do not hold the button down for too long or stops.

• Dimension B110

  Hi all

  I have a Dimension B110, which, from a physical aspect, is pretty much intact, apart from the HARD drive that somehow came loose. I am trying to buy a power cord a vga connection to see if it works in period.

  Anyone would be able to tell me if I would be able to use only the case to build a new PC? I don't mind spending money on a new motherboard or other devices. I'm studying for the comptia a + reviews and thought it would be a good way to practice.

  Thank you

  There are a number of issues that you will face, starting with the wiring of the beam of the Panel owner front of the system, which will not work with anything other than a Dell OEM Board.  The next will be about anything inside the system is usable for the construction of a new PC - the hard drive is the old PATA interface and you will find not so if all that is going to take this type of disc now - memory is obsolete, and you'll need a new processor (no new Council will have a CPU that old).  Keyboard, mouse and monitor are essentially on the recoverable items only in the system.

  If you really want to build a new system for the experience, these three parties - the rest reuse, recycle.