ESX5.5 on Dell Precision T7610

I have installed ESX5.5 on Dell Precision T7610 with this hardware configuration:

CPU cores: 16 GHz CPU 2.593

the processor socket: 2

Memory: 64 GB

Disks:

1-disk SSD 500 GB (installed on this drive ESX5.5)

2 - no SSD drive scsi drive attached serial ATA (Seagate 1000 GB) of disk

each thinks works well I was sent 3 VM on the first disc. I cam move the VM from disk 1 to Disk2.

but when I am trying to deploy VM on the disk2 Storage Seagate (serial attached scsi ATA drive), the operation failed, the second disc is no longer recognized by the server (disappeared since the storage drives),

I have to reboot the machine Dell to see the disc again, Please see the file log atthed vmkernel

some time, I do not see the disk on bios

Please your recommendation is very appreciated.

I want to confirm that ESXi 5.5 is taken in charge & certified on DEL T7610 of precision


Thank you very much for your support.

Madjid

Senior system engineer

Hello

The problem has been resolved by removing the SAS disk 1000Go, adding two SAS 500 GB raid0 configuration.

in this configuration I deployed machine VM without error to write file at the end of the deployment of the virtual machine.

Thank you for all your help.

Kind regards

Madjid

Tags: VMware

Similar Questions

  • x 8 connection distance MXI causes conflicts with my on my Dell Precision T3600 PCI slot

    Hi all

    The easiest to say is that I am migrating from a x 4 MXI explicit connection to an x 8 MXI express connection and when I do I get an error on the motherboard which is unable to load the single PCI slot.

    Error in WIn7 64 bit Device Manager reports a yellow exclamation point

    Device "Intel (r) 82801 PCI Bridge - 244 properties"

    The error listed in the device status box: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Unfortunately, I need this slot machine to run a card calendar to conjucton with PXI hardware. There is no anomaly when I used the x 4 connections with virtually the same loadout except for one Exchange a PXI-5122 (x 4 config) to SMU 5122 (x 8 config).

    If I leave the MXI PCIe card in but do not connect to chassis PCI slot SMU (and the fine card appear.)

    If I remove the PCI card into the slot, the error still occurs.

    I swapped the x 8 card and NVidia graphics card without success (the 16 x only two slots).

    I photographed the reader and removed the H310 Dell PERC RAID card and charged the RAID array RAID integrated Intel C600 and still no change.

    I have updated BIOS to A07 to latest A08.

    I updated the Intel Chipset at the latest on the Dell Web site.

    I guess that I just wonder at this point if someone is able to run a x 8 MXI express at SMU with a Dell Precision T3600, T5600 or a T7600 chassis.

    PC - Dell Precision T3600

    Windows 7 Enterprise 64-bit SP1

    3.2 GHz Xeon 6 core (E5-1650) w 16 GB of DDR3 memory

    Reference Dell PERC Raid (x 8 PCIe) H310 / C600 onboard Intel RAID

    Nidia Quadro 600

    2 x 1 TB SATA drive (mirrored)

    SMU Rack - OR 1082

    Slot 1 - SMU - 8381

    Slot 2 - OR SMU 5122

    Slot 3 - NOR SMU 5442

    Housing 4 - OR 4 to 6 TB RAID NI 8262 x MXIe

    Housing 5 - PXI 6733

    Housing 6 - PXI 6733

    NI MAX report is attached as a text file.

    After much work by NI Applications Engineer Kyle K, this problem has been resolved.

    I'll post the solution to this PC dependent problem here, just in case it will help others in a similar situation.

    It seems that Dell sometimes uses one default BIOS quite restrictive on the number of PCI bus in these (and other). By allowing several PCI bus, you will be able to list all the devices in the sacrifice of some memory available for OS 32 bit running on 4 GB of RAM. No problem for me because I'm under 64 bit OS.

    Congratulations to Kyle even if he has not posted here yet for him give real congratulations.

    Greg

  • Card PCI-6259 is compatible with the Dell Precision 390?

    Hi all

    I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

    Thanks to all in advance.

    Kind regards

    justdomechanicalengineering

    Hello

    We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

    Best,

    Dan Nelson

    Technical sales engineer

  • I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS

    I want to upgrade my 32 bit OS 390 dell precision to 64 bits OS

    Original title: upgrade of 390 dell precision

    Unless you can find the product that is not manufactured, your choices are limited to Windows 7 and Windows 8.

    Compatibility of your hardware and software research first...

    Windows 7: http://www.microsoft.com/en-gb/download/details.aspx?id=20

    Windows 8: http://windows.microsoft.com/en-gb/windows-8/upgrade-to-windows-8

    Tricky

  • Dell Precision 690 memory risers

    Original title: Dell PRECISION 690 MEMORY RISERS

    Help...
    Ive a precision 690 workstation, WITH 4 GB = (2 X 2 GB) WITH MEMORY installed now and Ive mounted a 1kw power.

    I JUST GOT A PR OF MATCHING RISERS (EG) 1,2 & 3.4...

    BUT THAT IS WHERE THE PROBLEM BEGINS.

    THE DISPLAY SHOWS THE RISERS MUST BE INSTALLED IN SETS OF FOR.

    AS SOON AS I INSTALL MORE MEMORY MAKES THE FAN BACK SOUNDS LIKE HIS WILL EVEN TAKE OFF BY PUTTING IN THE GAME OF MEMORY (4 GB), I GOT IN WITHOUT THE RISER INSTALLED FANS TO ACCELERATE.
    SOMEONE POINT ME IN THE RIGHT DIRECTION BECAUSE IM CERTAINLY SOMETHING WRONG.

    The page linked below can be useful, since it covers the installation of memory with the memory riser cards:

    Dell Precision Workstation 690 user's Guide
    Installation of memory (with maps of memory riser option)
     http://support.Dell.com/support/eDOCS/systems/ws690/en/UG/memory.htm#wp1063555

    If this is not enough, so I suggest the following tips to Shenan Stanley and contact Dell technical support.

    Kind regards

  • Dell Precision T3500 speaker internal

    Hello

    I just installed an internal speaker in my Dell Precision T3500.  How to configure a Windows 10 system use this speaker?  The internal speaker made reference to the T3500 product documentation, but I have found no documentation on how to make it work.  I guess it's a cheap business speaker, so I know that the quality is not great.  I hope just to a few basic out of it sounds.

    Thanks in advance,

    Rob

    Until you install the OEM driver, it will not work. The oem driver install the ESP AUDIO Panel that "recognizes" the speaker.  The generic Microsoft driver does not support the internal speaker of business.

    AD198X and ANALOG Soundmax AUDIO must have AUDIO ESP to detect the speaker.

    ESP AUDIO Control Panel Soundmax Applet which 'sees' the speakers and the headphones etc plugged into the audio codec or NOT.

    The problem is that by default, windows 7 or 8 or 8.1 10 will use a generic HD Audio driver and therefore things like the internal affairs speaker will not work and soundmax Audio ESP does not exist.

    The solution is to install the Dell driver and let windows update to decide if the driver needs to update whql.

    It is a common problem.   The function Audio ESP asking you what is attached to the port is not enabled in generic win7, win8, pilot win10.  You will also need to install DOTNET 4.0 and Directx June 2010

    Before installing this driver.  You must also add the feature back for legacy Live Show on Control Panel.  If you do all the right things in the right order, it will work.  Control Panel, all the elements of the Control Panel, programs and features, windows features, turning on and outside

    Then do the check boxes.  You MUST BE online when you do this, because he lament not find features and who need to download them from windows update.

  • Dell Precision 7710 with NVIDIA Quadro M5000M problems with 3D WPF content

    I have a

    Dell Precision 7710

    6920HQ-i7 CPU @ 2.9 GHz

    32 GB of Ram

    Windows 7 Pro Sp1

    NVIDIA Quadro M5000M 369.49 driver version

    I bought an upgrade for my

    M6700 Precision

    Our company has developed and uses software that uses WPF to render 3D content in a XBAP in Internet Explorer.  When I try to use it on the 7710, 3D content flickers when it is redrawn, makes it almost unusable.  The stats we can get our application, we can see that time of update for refreshment / current is about 45ms, while on most of the other PC, even those using the integrated Intel graphics card, typically 12ms.

    We used this software on a large number of PC without feeling anything as bad, which is obviously quite disappointing because the laptop should be able to view we want to hassle.

    As far as I can tell all our drivers for everything on this laptop are up-to-date.

    We tried using the NVIDIA Control Panel to force the laptop to use the High Performance Nvidia Quadro rather than the graphics card integrated card and it seems to be made while we were able to do, it shows the icon in the taskbar notification and which showed that IE was using the Nvidia.

    I tried tweaking pretty much all other settings I can think / see.

    I tried to use the Dell Precision optimizer to select different profiles with no luck.  The Dell Precision optimizer seems not really demonstrate the use of the GPU processor or any other stats to see with the GPU, which seems odd to me.

    I ran Diagnostics on the laptop available on the Dell support site.

    I searched the net and found a few examples of problems with Nvidia and WPF cards, but none of these things that we found seems to apply to our application.  We have desktop computers at the office where he works well with other Nvidia cards / best of all.

    In addition, the fan on the 7710 will quite difficult sometimes - hard that I expect.  I tweaked the power settings to move less, but it always seems to run the fan more that I think it should / would appear on my M6700 - or maybe it's just a fan of stronger.

    So I wonder:

    If anyone out there has experienced something similar?  If so, any suggestions on how to fix or things to try would be greatly appreciated.

    Thank you

    We solved the problem by making changes in our application software.  We still don't seem to be able to reach the same FPS as for the other GPU, which should be similar, but we're working on that also.  Perhaps because we are trying to run the application at 4K.  If anyone has a similar laptop and can provide details on the 3D graphics performance using any software comparative analysis, it would be great if they could share for comparison.

  • Dell Precision T3500 and SPDIF Port

    Hello

    I'm in the market for a new computer because my old HP died and I really like the Dell Precision T3500. I would like to put one of my old graphics card in the new Precision T3500, a Nvidia Geforce 8500 GT because it has a HDMI port on it and I want to drive my television station. However, have sound out of the HDMI on the Geforce port, you must connect an SPDIF cable on the Geforce to the SPDIF port on the motherboard. Is my question, there a SPDIF port somewhere on the motherboard in a Precision T3500? I looked but I have never seen a list of anywhere. Thank you very much for the help!

    Chris

    Hi Chris,

    Thanks for looking in the Precision T3500 computer next and we hope that you don't end up buying one!

    That said, I must not be the bearer of some bad news that this system is not equipped with an SPDIF port on the motherboard. A possible solution would be to buy a sound card has a SPDIF connection and then connect the graphics card to that. Of course, it would take one of your PCI/PCI-Express slots.

    I hope that answers your questions - if there is anything else, please let me know!

  • Dell Precision 5510 - M2 SATA SSD

    Hello

    I recently bought a Dell Precision 5510 and I now intend to install a 500 GB SSD (M2), or a Samsung 500 GB 850 EVO m2 and a critical CT500MX200SSD4.

    Does anyone know if one of these two SSD is compatible or have any problems with this laptop?

    Thank you

    J.

    Thanks for posting your request here.

    These two device should work without any problems after the upgrade.

  • Dell Precision 490 CPU Upgrade

    Hello

    My Dell Precision 490 currently runs 2 x Intel Xeon 5130 (Woodcrest) 771 socket LBA.  The Intel Xeon 5160 next would be compatible with my system. My mobo is ODT031 / 5000 X of Chipset / 6321ESB Southbridge.

    Server Intel Xeon 5160 3.0 GHz dual core Socket 771 CPU SL9RT 4 M/1333 64 - bit

    Type of CPU / microprocessor
    Server market segment
    Family Intel Xeon 5100
    Model number? 5160
    CPU HH80556KJ0804M reference numbers are a microprocessor tray/OEM
    BX805565160A is a microprocessor in a box
    BX805565160P is a microprocessor in a box
    Frequency? 3000 MHz
    The bus speed? 1333 MHz
    Clock multiplier? 9
    The package 771-land Flip - Chip Land Grid Array (FC-LGA6)
    1.48 "x 1.48" (3.75 x 3.75 cm)
    Socket Socket 771 (LGA771)
    Introduction date 26 June 2006
    Price at introduction $851

    S-spec numbers
    Production processors of'RE / QS
    Part number QLUF QOXI QTII QXQT SL9RT PLATE SLAG9
    BX805565160A +++
    BX805565160P +++
    HH80556KJ0804M +++

    Architecture / Microarchitecture
    Core microarchitecture
    Bensley Platform
    Cranberry Lake
    Glidewell
    Core processor? Woodcrest
    Review of basic? B0 (QLUF)
    B1 (QOXI)
    B2 (QTII, SL9RT, SLABS)
    G0 (QXQT, SLAG9)
    CPUIDs 6F6 (SL9RT, SLABS)
    6FB (QXQT, SLAG9)
    0.065 micron manufacturing process
    Data width 64-bit
    The number of cores 2
    The number of threads 2
    Floating Point Unit integrated
    Level 1 cache size? 2 x 32 KB instruction caches
    data cache 2 x 32 KB
    Level 2 cache size? 4 MB of shared cache
    Multiprocessing up to 2 processors
    With MMX technology
    SSE
    SSE2
    SSE3
    Extended Memory 64 technology (EM64T)?
    Virtualization technology?
    Execute disable bit?
    Power mode low features HALT
    Extended halt mode
    Stop grant mode?
    Enhanced SpeedStep technology?

    Thermal/electrical parameters
    Nucleus of V? 1V - 1, 5V (B2 Stepping)
    0.85V - 1, 5V (G0 stepping)
    Minimum/Maximum operating temperature? 5 ° C - 56.5 ° C (B2 Stepping)
    5 ° C - 60.7 ° C (B2 Stepping)
    5 ° C to 65 ° C (G0 Stepping)
    Maximum power dissipation? 130.83 watt
    104,84 watt (continued)
    Thermal design power? 65 watt

    Notes on Intel HH80556KJ0804M
    The bus frequency is 333 MHz. Because the processor uses Quad bus Data Rate effective bus speed is 1333 MHz
    Part BX805565160A includes 3U + active / passive thermal solution 1U
    Part BX805565160P includes the 2U passive thermal solution

    I tried an Intel x 5365 and it remains as a CPU not supported. I'm under revision of BIOS A08. There is sauce more involved magic, such as a general release BIOS rev no?

  • Hard drive not recognized by BIOS in Dell Precision T7910 workstation

    Greetings,

    I recently acquired a Dell Precision T7910 workstation without all the hard drives installed, so I went to the store and buy a 240 GB Sandisk SSD put in the hard drive and then installed caddy caddy in port 0 (I also tried port 1 with the same results), and then I turned on the computer and it says "no drives found" press f2 to enter setup or press f5 for the diagnostics. I think there is probably a setting in the BIOS to configure the hard drive that I'm ignorant, so any help would be appreciated.

    Is there a CTRL-R (or another command CTRL during POST) to enter a for the LSI controller configuration utility? Possible that if installed/enabled, ports are managed by the controller LSI instead of the BIOS. However, I have not a 7910 to watch... just go out how it worked normally.

  • Dell Precision 390, processors who work for an upgrade?

    We have two Dell Precision 390. One with the Conroe E6300 and one with the Pentium 4 631, variety of Cedar Mill.

    We want to upgrade the P4 to something better.

    We have a lying here Q6600 processor, and an old Pentium D 830 dual core CPU, but it's be better performer than one heart P4.

    Are the same motherboards in these two 390 s? I think that our E6300 could be improved to a Q6600, but the 390 with the P4, I'm not sure. They are all two socket 775. We already have the necessary correct heatpipe radiator for more hot processors.

    Thank you

    I got the info from Dell today. There are two motherboards used in the 390. We support the line Cedar Mill and Conroe CPU. The other motherboard for 390 supports the Q6600, QX6700 and QX6800.

  • 4 TB drive added for dell precision t7400 but does detect that 2 TB

    Hello everyone,

    We had a Dell Precision T7400 running windows 7 Professional SP1 and we have added a new hard drive (4to), but it does detect that 2 TB of disk (already placed the GPT disk).

    I read in another post that I started to update the SATA drivers?

    Is this correct?

    Where are the SATA drivers?

    Thank you.

    Best regards.

    The drive is connected to the motherboard or are they connected to a controller card? The T7400 controllers (SAS 6/iR, PERC 6 / i) do not support disks larger than 2 TB. If it is connected to the motherboard, you must update the Intel RST drivers:

    https://Downloadcenter.Intel.com/download/25165/Intel-rapid-storage-technology-Intel-RST-RAID-driver

  • Dell Precision M6400 Win7 64 bit Dell Webcam Central software missing

    Dell Precision M6400 Win7 64 bit Dell Webcam Central Software.

    Long story short, just bought a M6400, updated after purchase with SSD, clean install. Can't find Win7 64 bit Dell Webcam Central Software.

    Please help, no I can't go to my account and download due to the transfer of my laptop has not yet closed.

    Webcam is recognized in the windows configuration, but not at dell. Already deleted the software of the victory, but I have no way or nothing to replace it with.

    Help, please

    Hi hdpartman,

    If the webcam does not work, I recommend you to uninstall and reinstall the webcam drivers.

    To uninstall the Dell webcam central software, perform the following steps:

    1. Click Start.
    2. Click on Control Panel.
    3. Using the drop down next to the view by: in the upper right, select large icons.
    4. Click programs and features.
    5. Click Dell Webcam Central.
    6. Click on uninstall.
    7. Confirm the uninstallation by clicking OK.
    8. Once uninstalled, restart the computer.

    I have provided a link below to reinstall the webcam drivers.

    http://Dell.to/YZkDs3

    Waiting for your answer!

  • Dell Precision T3600 problem with feedback headphones

    Hi all

    I recently acquired a new Dell Precision T3600 (in January 2013). However, I got a problem with your comments when I insert earphones into the headphone jack on the front of the office. The noise can be described as a sizzling/humming noise that is loud to the point that it is too distracting to listen to the audio through it. You can hear in the headphones, however, comments are always present and distracting. I also used several different headphones to exclude that, as the problem.

    I'd love to hear from others if it is a common problem with this system. I've read elsewhere that it could be a problem with the graphics card from NVIDIA, but I'm not sure.

    Kind regards

    Shaun.

    Some components of the system:

    -Intel Xeon CPU E5-1603

    -OS Windows 7

    -Graphics NVIDIA NVS 300

    This should answer your question.

    http://en.community.Dell.com/support-forums/desktop/f/3513/t/19466580.aspx

    I just got a T3600 and will contact them to get the front i/o Panel replaced.

Maybe you are looking for

  • Visual Glitch, probably because of multiple monitors

    Thunderbird is not to maximize the application correctly. What happens on two different machines. My machine is running Windows 7 64 bit SP1. You can see on the screenshot filter buttons and the message are cropped and emails are cropped. If I double

  • Sony KD-65XD8505 wifi disconnect after market turn / stop

    When I configure wireless with my Sony KD-65XD8505, it works fine until what I turn it off, when I turn it back on, it tells me that it is connected but there is no internet connection. Now, I'm positive, that there is an internet connection as my la

  • HP pavilion 096sa-15: cool presence is not install

    recently, I had upgraded to windows 10 when I tried to install hp cool presence is not install, I am attaching the picture of it. I'm not undersstanding problem. someone help me.

  • Virus security tool

    Where can I find instructions to get rid of the Security Tool.Ink/Security tool / Trojan: Win32 / Winwebsec?

  • DVD burner double layer

    HelloI PLDS DVD + - RW DH - 16ACS ATA Device installed on my desktop, I want to know if she is capable of burning dual layer 8.5 GB DVD-R. Thank you Angel_op