Dell Ray 2848

Similar Questions

• Reference Dell PowerConnect 2848 OID for CPU time and memory

  Hi all

  This is my first post in this forum. I searched all the messages that can solve my problems, but I could not find so if there is already an existing post and I couldn't find it please guide me to it.

  My case is. We have a few Dell PowerConnect 28xx switches in our network. We want to monitor things like the CPU, the temperature, the use of the RAM usage. We use Solarwinds IpMonitor monitoring tool. I downloaded the MIB, I could find the download of Firmware from Dell drivers and downloads page. I went through the entire MIB, but I couldn't find an OID for the foregoing.

  So if anyone can help me please what OID is used for usage of CPU and RAM temperature it will really help me.

  Please let us know in case we need more information on my side.

  Thank you

  Frank Moreau

  I did use SNMP on the 28xx but here are some various sensor OID, I used for the N-series, as well as some older models Powerconnect.  I don't know if they will work for the 2xxx, but you can try one or two and see if they work.

  N - Series (FW 6.2 and later versions) temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.0
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.5.1.1

  62xx (3.0.x.x firmware or later-, some may also work with 2.x firmware)
  Temperature OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.8.1.4

  Are the OID to use CPU for N-Series switches
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1 (total free memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2 (total memory)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3 (table for the following...)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.1 (index)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (name of the process using CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.3.1.2 (% CPU used by the corresponding process)
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.4.0 (cumulation of all the activity of the CPU)
  1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.9 (CPU utilization shows 5 s, 60 s and 300s).

  OIDs memory
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.1
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.1.1.4.2
  Power supply OID
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.7.1.3
  OIDs of fan
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.2
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.3
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.4
  . 1.3.6.1.4.1.674.10895.5000.2.6132.1.1.43.1.6.1.5

  35xx (2.0.x.x or later firmware)
  Temperature OID
  . 1.3.6.1.4.1.89.53.15.1.9
  . 1.3.6.1.4.1.89.53.15.1.10
  OIDs of CPU
  . 1.3.6.1.4.1.89.1.6
  . 1.3.6.1.4.1.89.1.7
  . 1.3.6.1.4.1.89.1.8
  . 1.3.6.1.4.1.89.1.9
  OIDs memory
  . 1.3.6.1.4.1.89.29.11.1
  . 1.3.6.1.4.1.89.29.11.2
  P.S. The OID
  . 1.3.6.1.4.1.89.35.5.1.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.2
  . 1.3.6.1.4.1.89.83.1.2.1.3
  . 1.3.6.1.4.1.89.83.1.2.1.4
  . 1.3.6.1.4.1.89.53.15.1.3
  . 1.3.6.1.4.1.89.53.15.1.3
  OIDs of fan
  . 1.3.6.1.4.1.89.83.1.1.1.2
  . 1.3.6.1.4.1.89.83.1.1.1.3
  . 1.3.6.1.4.1.89.53.15.1.4
  . 1.3.6.1.4.1.89.53.15.1.5
  . 1.3.6.1.4.1.89.53.15.1.6
  . 1.3.6.1.4.1.89.53.15.1.7
  . 1.3.6.1.4.1.89.53.15.1.8

  for old firmware - if the 35xx above does not work:
  Temperature
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.9 (Celsius)
  1.3.6.1.4.1.674.10895.5000.2.89.53.15.1.10

  I hope this helps.

  B

• What Dell switches are suitable for VMware?

  We will have a very simple vSphere environment. What switches should we buy? Must be Dell. I am a newbie in networking, but I'm a PCV.

  2 x ESXi hosts in a cluster HA/DRS 5

  vCenter Server will run as a virtual machine

  We will be using VLANs for security

  We will use a pair of resilient switches

  No storage traffic will go on these switches, only management, vMotion and VM Networking

  The data center will provide a managed firewall. There will be no other switches.

  X 2 Dell PowerConnect 2848 switches would be enough? They can carry traffic between the VLANS? Or do we need more expensive switches?

  Sorry for the newbie question!

  From what I can find on the Dell Web site, the PowerConnect 2848 switch isn't a layer 3 switch, so it would not be able to carry traffic between the VLANS.  To route between VLANS, you will have them either need a dedicated router, or you'd need switches with 3 as the PowerConnect 6248 switch layer routing capabilities.

• PowerConnect 2848 - several VLANS on the 1 port does not

  Hello everyone.

  I have a Dell PowerConnect 2848.  My router is a Netgear SRX5308. In the router, I've created several VLANs (VLAN ID 10 and 20) and would that pass to the ESXi server. If I connect the ESXi server directly to the router, everything works as expected. My VMs are picking up correct VLAN based on the parameters of ESXi.

  I need the 2848 between the two, because I need to add more devices and other servers with a VLAN specific.

  Currently I use port 25 for switch 2848.

  I put the switch to managed mode.

  I created switch-> VLAN-> belonging to a VLAN, VLAN ID 10 and 20.

  I select 10 VLANS and put the T on port 25.

  I select the VLAN 20 and put the T on port 25.  (I also tried to put a U on them, just to try, but did not work)

  But my virtual computer are not able to reach the DHCP on the router.

  Spanning Tree is enabled.

  I'm obviously missing something...

  I have already passed last week banging my head on this, but have not been able to pass traffic along.

  Help, please!

  So you're on the right track. If port 25 is facing the router? What port must face the ESXi Server? That port should also have VLAN 10 and 20 should be labelled.

• Connecting Samsung Blu - Ray player for DELL with Windows Vista computer

  My new Samsung BD-P3600 Blu - Ray player does not recognize my name/password user to allow me to share office files in my shared Documents.

  If anyone has had this problem, how you didn't solved the problem?  Samsung was sent to DELL, DELL has no answers.

  Thank you

  E-mail address is removed from the privacy *.

  Hi CWG13,

  Thank you for writing to Microsoft answers Community Forums.

  This can happen if there is a problem with some settings or folder permissions in the Blu - Ray player that could do this. It could also be the security program blocking the part.

  A few things you can try creates a separate on the desktop folder, rather than to use the documents shared and then try to access it from the drive.

  You can also try to disable your firewall program and security and then try to access to the shared folder.

  Try to disable the user account control and check.

  You may also be able to solve the problem by taking possession of the record.

  To take ownership of a folder

  1 right click on the folder you want to take control and then click Properties.

  2. click on the Security tab, click Advanced, and then click the owner tab.

  3. click on modify.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  4. click on the name of the person you want to give to the property.

  5. If you want this person to be the owner of the files and subfolders in this folder, select the void containers and objects check box Replace owner.

  6. click on OK.

  Let us know if this doesn't work or if you need further assistance.

  Kind regards

  Sharath

  Microsoft Answers Support Engineer

• Dell XPS 12 - Blue Ray Player does not work

  Hello

  Thanks for your help!

  I bought a DELL XPS 12 - 5 months ago, XPS 12 is compatible with reading Blue Ray.  I brought the external material of Blue Ray player and Nero land 12 Blue Ray playing software to operate the equipment. I tried to launch the Blue Ray player and he said: 'the connection to your screen does not have the system requirements for Blue-ray.  Please check your system for HDCP compatibility or use the analog output.  (Error Code (1:0 x 13, 2:0 x 80400034)).

  Could you please help me to get the Blue Ray drive to work.

  Josh

  

  I don't know what is the Dell policy on programs like this, but the free version of DVDFab Passkey () should replace the HDCP thing and allow you to use NERO.

• (Redirected) Install a Blu - Ray in Dell Inspiron 620

  I'm trying to install a Pioneer Blu - Ray in my Inspiron 620 player. Before I disassemble this thing, I wonder if the eject button won't work even with the face of my pc. Each door of the car has a command button installed on the right, but it does not seem that it is aligned with the eject button on the drive. Any suggestions? Inspiron 620, Pioneer BDC-207DBK

  Best of this post in the forum hard disks (HDD, CD/DVD, Blu - ray) here:
              
  http://en.community.Dell.com/forums/3534.aspx

  Bev.

• I'm confused. Last year I bought an Inspiron from Dell., with wmp. The only thing needed to play Blu - Ray DVDs are the new codecs?

  Dell Inspiron has a matshita dvd +-rw drive uj8b1 and the driver is a samsung HM641j1.

  Gotcha!  It is the material as well as the software miss me.  Thank you.  guess I'm stuck with my TV.

  ======================================
  You are welcome and thank you for the comments.

• Why are my download speeds so slow with flag and windows 7. My dell inspiron becomes 10-13 mb

  Pavilion dm1

  REF ly133av

  [Redacted] SN

  Windows 7 operating system

  This Pavilion is brand new and only get like . 2 Mbps of speedtest.net. The download speed is normal, but the dwnload speed is terrible. Now, I still have my old computer sitting here and it is on the same network WIFI get 10 to 15 Mbps of speedtest. It's a dell inspiron with windows vista. This must be a matter of hardware/software. I saw many posts to ask this question but I havnt seen the answers. Please tell me you can help...
  
  
  
  -Ray

  All,

  I have this SAME problem.  I just bought my m6 Pavilion three days previously and immediately noticed that the download speed is very slow.  In addition, a lot of things people recommend this site do take into account that the laptops are brand new, the parameters are already factory installation and things are not running in the background whenever we try to download.  And just like the original - poster I have my old laptop awkward, almost dead here and it's the things download 5 times faster than my new laptop.

  Also, I found another post online from a user in HP Pavilion, who bought a new laptop and this is the slow download.

  So taking all this into account, a PERSON LOGIC CAN CONSLUDE THAT THE PROBLEM IS WITH the computer PORTABLE PAVILION.  Yes, is there an employee HP mans this site who can lift this problem and come back with the official HP answer to why this problem occurs?  I will definiately go online and noted the low ratings sites flag if I don't get an adequate response.

• 700-109 envy: Blu - ray burner?

  Optical drive my camera has a blu - ray burner? I've upgraded to this eqipment 20 months ago and for the first time since then, then I try to burn a video to a disc in the blu - ray format.  The machine, he replaced (a Dell to 2008) was a blu - ray burner and at no point in the purchase process for the upgrade is already produced for me that I might need specifically look for a machine with a blu - ray burner.

  The specs on the HP site describe the disc as "Drive DVD SuperMulti burner".  Nothing in the record specifically referred to the speed of burning blu - ray (there is a large table with all sorts of types of discs and burning speeds, but no reference to the blu - ray format).

  I think the actual hardware of the drive unit is GHA3N DVD-RAM, if that helps.

  Hello:

  A 'Engraver of DVD SuperMulti' drive is not a Blue Ray player.

  It is a DVD - RW drive.

  If you still have your old Dell, you can see if you can swap drives on.

• PowerDVD will not play Blu - ray

  Dell Studio XPS 8100. Drive Blu - ray. PowerDVD came with the system.

  Well, I just bought my first Blu - ray disc. And now it will not play. PowerDVD tells me to update the software. Then I do. I restart the software. PowerDVD still tells me to update the software. Then I do. I restart the software. PowerDVD still tells me to update the software. And yet again, I do.

  And then PowerDVD will not even run at all. It crashes. I can't get anything.

  No problem, I tell myself. I will contact all the customer support.

  JAL out of luck - unless I want to pay.

  Wait a minute. I paid for the software, when I bought the system. I'm waiting for the software to work.

  I have updated the firmware of the player and for my graphics card. I jumped through all the hoops. And yet, PowerDVD crashes before I can do something with it.

  So what am I supposed to do? Why won't work PowerDVD?

  I see that this is not an unusual problem with the software. However, I still have to find a solution. Can someone help me?

  The likely reason for Apple does not officially play Blu - ray support on its machines

  is that there is no way for a software playback Blu - ray should be installed and "just works.

  (Well, since all Macs since 2006 boot Camp support and XP/VISTA/WIN7 is not quite correct.  If you install windows, it works.)

  There is also no Apple Blue ray software, but he needs an active internet connection to play the media.

  A third party did a player of Blu - ray compatible Mac OS X, called Macgo.

  Options for Blu - ray authoring have come from Apple in the form of compressor in Final Cut Studio and the third Roxio Toast Titanium.

  Blu - ray burners that work with them include those sold by the calculation of the other world and MCETechnologies and both can replace the built-in DVD burner

  most Macs. AirX do Blu-ray playable on iPhone/iPad/iPod touch

  Player of Blu - Ray Mac buy, now only 39.95 $59,95 $

  Download Mac Bluray Player for Mac

  Download Blu - Ray to PC Player Mac

• How to go from su mode not supported on Powerconnect 2848?

  Hello

  I need swicth managed mode to unmanaged mode on Powerconnect 2848. I pressed the mode button and rebooted but still solid green light it which indicates that swicth still in managed mode.

  How can I do this swicth not managed again?

  Thank you

  Change the mode switch to the 'managed' to 'mode not supported' clears the configuration of the switch. Change mode "managed" "managed" mode enables graphic management interface and sets the system to the factory settings. There is no way to back up the configuration of the switch.

  Always a good idea to be in the current version of the firmware.

  www.dell.com/.../DriverFileFormats

  To restore the default switch, press the button Mode for two or three seconds and then release. It should then restart on its own, do not manually power cycle it.

  Web Interface method

  Open a Web browser and connect to the IP address of the switch management.

  Type the appropriate user name and password, and then click OK.

  In the left navigation, click the plus sign to expand the system, file management, and then restore the default settings.

  Click OK in the confirmation dialog box.

  In the left navigation, click on the plus sign to expand the system, general, and then click Reset.

  Click Reset, and then click OK in the confirmation dialog box.

  Reset to factory CLI

  Reboot the switch, the switch is reset, look for the line to appear that says Autoboot in 2 seconds - press RETURN or Esc to abort and enter prom. and when that happens, press or or to access the start menu.

  In the start menu, choose [2] file Flash Erase by pressing on <2>and then confirm by pressing

  Hope this helps,

  Thank you.

• The CyberLink Powerdvd software cannot download from the download at Dell factory installed software page.

  I wanted to try an improved version of Powerdvd from Cyberlink and when I downloaded the software Powerdvd 13 he mentioned to removed the previous software, I did.

  I decided that I didn't want Powerdvd 13 and went to the Dell website to retrieve my download pre-installed software (I did before without any problems), however, today I received an error message (see attachment).

  I was wondering if there is a way to get the Powerdvd which was pre loaded on my Alienware R4 I bought in July 2012?

  Thank you

  Hi GGCAN,

  The support site is having some problems. I suggest to try again today. If it still does not respond, please contact Dell customer service and try to talk to them by sending you a CD.

  I'm not a fan of PowerDVD and it dropped in favour of VLC Media Player. Its only limitation is that he doesn't play blu - ray movies, but it will play DVDs fine.

• Dell inspiron one a HDMI input with output usb audio

  Hi, I recently bought a dell inspiron one 2330 and some of my blu - ray high-fidelity discs do not work very well at all. :(un peu déçu car c'était la principale raison que je l'ai acheté.)

  So I tried my blu - ray player in the HDMI port, but now it only uses the computer speakers not my B & W Zeppelin air via the USB input.

  If advice how to fix the blu - ray glitch player that seems to start and stop on most of my records or produce audio output to HDMI input to the USB port would be much appreciated

  Thanks in advance.

  Which seems to indicate a problem with your video card. The cooling works may not properly. I would contact Dell on the replacement of it. This may explain the poor video performance.

• upgrade to windows 8.1 now my blu ray will not play blu - ray movies

  I have a Studio XPS 435 t/9000 with an amd radeon r9 200 series graphics card and the hard drive is a PLDS DH - 6E2S 6 X HH SATA multiformat DVD-RW/BD-ROM. and I have cyberlink power dvd 14 ultra. all suggest how to get my computer to read blu ray update firmware of the dells site doesn't seem to work on windows 8.1.

  When you insert a blu - ray disc, open Explorer and click on the optical drive and tell me if you are able to read the contents of the disc. If you are, then the drive is fine but you need an application to read any blu ray movies. If you can not read the contents of disc, I suggest Dell diagnostics running on the drive with a blu - ray disc in the drive and perform the test of READING.