Dell reinstall drive

Similar Questions

• Reference Dell upgrade package cannot install the dell wifi driver

  Hello

  Since I reinstalled Window8 in my inspiron 3138, the laptop can not install the upgrade package from dell"and can not install my wifi driver.

  I can not install the following drivers and the laptop cannot detect WiFi at all.

  1704 Wirelss Dell Wifi driver (Network_driver_342TP_WN32_7.35.333.0_A01)

  Driver for the mod aircraft Dell (Network_driver_PX8MM_WN64_1.0.0_A00) switching

  Do you know how to solve this problem?

  Best,

  Lucy

  Please let me know which operating system you currently have on the computer. It's 10 or windows 8.1. Because the version you are trying to install is for windows 10. Also please go to Device Manager and confirm the card this wireless network adapter option.

• Are Dell DVD (driver installers) Dimension E520! Not authentic?

  Are Dell DVD (driver installers) Dimension E520! Not authentic?

  David Brown snr,

  Dell uses Dell OEM operating system disks.

  When you installed Windows 7 (32-bit or 64-bit) have you installed the utility of desktop / laptop and drivers from the chipset first? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order If you can't find the drivers for Windows 7, then try to use Vista (or XP), 32-bit drivers for Windows 7 32-bit to 64-bit Vista (or XP) drivers for Windows 7 64 bit and install the drivers in compatibility mode.

  Rick

• can model the d9085t except dell hard drive

  Can model D9085T except dell hard drive?

  Hello:

  If the Dell hard drive is an IDE hard drive and probably no more than 80 GB, it should work in your HP Brio, but you will need to reload your operating system.

  Paul

• Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• Soundbar DELL AC511, driver problem

  The first installation of the sound AC511 bar, Windows recognizes the device correctly as Dell soundbar and I could hear him. but after the reboot, Windows recognizes the device as a USB speaker and I can't hear the sound of the it.

  It seems that Windows is unable to locate the right driver for AC511. I also tested device Windows 7,8,8.1 and after restart, the same problem arises. It is recognizing the USB speaker device. So, I deleted devmgmt.msc device and device reinstalled several times. but the problem remains. He always recognizes as speaker USB device and I can't hear the sound of the it.

  any solution to this problem?

  Thank you.

  I'm not sure I'm reading these messages correctly, but if the soundbar using an USB connection on the screen, it will not work unless you have a cord connecting the monitor to the computer. The provided monitor with a cord that connecst the monitor to the computer in order to perform the USB connections on the monitor function. Otherwise, they will not work. I have not yet tried, but I read about it. The USB cable end goes to the computer and the other end goes into the USB port upstream on the monitor.

• (Redirected) Dell hard drive recovery industry

  I have several problems with Windows 7, now aged 4. After trying different solutions, it seems preferable to perform a recovery. To make sure that I am not reinstall problems, Microsoft advises I have start the recovery by formatting the hard drive. What I don't know, and apparently my correspondent at Microsoft does not know "formatting the hard drive also removes the Dell recovery programs? I have

  Hi Michael,

  Please repost this in the Microsoft OS forum for assistance.

  http://en.community.Dell.com/support-forums/software-OS/f/3524

• No connectivity after installing Dell 1702 Driver for Wireless Adapter - of the suggestions?

  Hello world

  I'm completely confused on this one and at my wit's end.
  I have an Inspiron laptop M5110 and some difficulties to stay connected to my internet so this morning I decided that I would try to update the drivers. I uninstalled the Wireless and Blue Tooth drivers and reinstalled them, but now it will not even TRY to connect at all. In the lower right corner, there is a red x on the wireless bars and says No connections are available. Previously, it would have a circle of rotation while trying to connect, but that is more than all. My Ethernet connection works fine, I even uninstalled and reinstalled this driver (REALTEK) and his work with no problems. So to publish its specific wireless card...

  If I run IPCONFIG, the wireless card isn't even more appear. I tried to reset, deactivation, all I could think about. I tried several versions too many drivers, but nothing works.

  Right now, I removed it, so I have a yellow exclamation next to the network controller in my device settings. My hardware for the adapter ID is PCI\VEN_168C & DEV_002B & SUBSYS_02051028

  I think the info above, I believe that the Atheros wireless card belongs.

  Have any suggestions at all as to how I can get this thing to even try to connect to a network? I'm dead in the water... ANY idea would be so appreciated. I can stick captures screen or something else, if you think it would help.

  Thank you all,

  Tim

  Timmy1028,

  Zone Alarm because of the systems do not connect. Not very good if you want to continue your connection is allowed, or if you have a product key, for your subscription, temporarily uninstall Zone Alarm.

  The Dell Wireless 1702 802.11b/g/n connects to 2'4 GHz ONLY.

  Places to look to see if your connection is activated

  Also try reading, How to repair a connection

  Go to the drivers & downloads , enter your service tag, and then select your operating system. Under network, download and install the latest drivers.

  Try these tweaks...

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Click Advanced. Look and see if this adapter has Antenna Diversity. If the adapter Antenna Diversity, change from automatic to the auxiliary voltage (can you also tell me if there or that it has no Antenna Diversity for my notes.) Thank you)

  Go to the options power and changed the wireless adapter setting, adjustment of maximum power for maximum performance.

  

  Rick

• dual-boot reinstall drive on Win 7

  It is a desktop Dell Inspiron dualboot computer.  I upgraded both drives to win 10 and then knocked over a drive for Win 7.  Bad move!

  I was warned that I would need to reinstall the programs.

  I can't Adobe Reader to resettle on Win 7.  The installer sees the drive on Win 10 and stops, no alternative offered to get the player on the Windows 7 disc.

  Help, please!

  THX, Paul Lady

  He does eventually got.  Made the default Mozilla, browser to update all and got running JavaScript, no block Adobe, ran to download and install and it went to 100%.  Problem seems to be JavaScript security stuff and the 11.0.10 version 11.0.13.. vs. who knows?

• Satellite Pro L500 with WXP: reinstalling driver

  Hi all

  Ive been pulling my hair out trying to reinstall a driver that I accidentally uninstalled during a cleaning system.
  It relates to the 'device modem on high definition audio bus"which now appears as one? in the Device Manager. It is also seems to hinder my web browsers.
  Ive been in the sites Toshiba and download and install the audio device and realtek modem drivers, nothing seems to work.

  Im a part time computer user so any friendly advice is welcome

  see you soon,

  Wesley

  If uninstalling and reinstalling these drivers do not work then the next step is to do a system restore to restore the registry to an earlier date.

  If this does not work, then Windows is damaged without repair possible. You may need to run recovery to restore Windows to its factory condition and back up your important data.

• Reinstall drive won't start no-Satellite L10

  Try to use reinstall on my L10 drive. The manual says to put the disk and start the computer while downpressing 'C'... nothing happends and when I released 'C' happening in windows normal mode... Anyone?

  Hello

  By pressing the C button the unit should automatically booted from the CD/DVD drive. But if doesn t work so you can try to change the BIOS Boot order (CD in the first place player).
  Put the recovery CD in the drive and reboot the machine

• Pavillion g6 with/without reinstall drive replacement hard drive?

  I need to replace the hard drive on a G6 Pavillion.  Unfortunately, we have no recovery discs.  Is it possible to reinstall Windows 7 without having to buy the operating system?

  Recovery disc for Windows 7 are usually under $ 20. They can be ordered from your page of Support or by phone.

  If you live in the United States or to the Board, contact HP here.

• W520 Trackpoint dead, pad and lower buttons OK - reinstalled Driver/utility

  All,

  TrackPoint stopped any reaction and the three buttons "higher" in the space bar don't work. Tab in the configuration of mouse UltraNav Synaptics of Trackpoint pane is greyed out. I reinstalled the driver and "Utility" for UltraNav. The search here and on the web--until now no specific fix.

  I don't know what caused this, but I think that I tried to install a software to enlarge the area under the cursor just now because I had to give a demo of the software in a large room. Well, I remember it is considering, but I don't remember if I ran in fact anything. And I used the machine a lot since then and I can't imagine that I have not tried to navigate dialogs, Explorer, etc., without using the trackpoint.

  So I think it's a very recent change.

  Win7 Pro 64-bit. I am the sole owner. TrackPoint is "enabled" in the BIOS.

  Ideas or suggestions appreciated.

  jonathan7007

  Continuing to go with bad keyboard (or, possibly, the keyboard cable). Take off the keyboard, and see if the cable is damaged or worn out?

  In addition, stuck TrackPoint mouse buttons will break the touchpad and buttons.

• Reinstall drive

  I need a disc of resettlement for vista Home premium 32-bit

  Hello

  Microsoft sells more than Vista and Vista ISO downloads were arrested.

  These are the methods to reinstall vista.

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Reinstalling driver Photosmart C4600 fails on windows 7 Enterprise 64-bit

  I ran HP print and utility of doctor Scan on my windows 64 - bit 7 and utility reported some problems with the driver (not exactly) and suggested that the driver installation updated on HP site. So I uninstalled the driver (using uninstall programs and features) and wanted to install the latest version.

  The driver pack that was / is available on the website of HP drivers is the same as the one I used to install my all-in-one printer (PS_AIO_05_C4600_NonNet_Full_Win_enu_140_047) originally. As I uninstalled the driver, I had to install again. I have use any additional tools and utilities of this complete pack, so I downloaded basic pack (PS_AIO_05_C4600_NonNet_Basic_Win_enu_140_047) and start the installation.

  At one point installer prompted me to connect the printer to the USB port, I did, and began installing plug-and-play of windows. It first update of windows, then "driver usual places" and in the end consider them this peripheral driver for Photosmart C4600 is not found.

  Of course, I did install using account with administrator privileges.

  That's what I tried later.  Before each attempt to (re) install driver I disconnected printer USB, uninstalled the driver and it does not connect again before the guest asked for it:

  -logged on to windows as built in admin and install the package, USB printer when prompted to do so, install HP acknowledges the device - PnP MSI not found driver, while the hp installation program continues to run constantly

  -logged on windows with administrator privileges, disabled the anti-virus, install the package, I have attached USB printer when prompted to do so - guess what? Windows found the driver for Photosmar C4600, hp Setup works and works up to the judgment of the Task Manager

  -tried both with a complete package and base - the same thing, windows can't find a driver

  -installation of the hp driver running with the option of reaching this last printer - did not help, everything seems to be properly installed, but what printer is actually connected to USB windows began to look for the driver and the reports that it can't find it

  -Switch USB ports on pc - the same

  I tried to link the driver manually: with the driver installed and Photosmart hp package attached (in devices and printers Photosmart C4600 was presented as unknown device) I opened the properties of the device C4600, went to tip (or something like that), clicked on update driver, specify location manually, I entered "C:\". "and checked"search subdirectories"- windows reported versatile (well, it was not exactly what was written but it was the sense), but it says this disk file cannot be installed.

  I noticed that it is not DOT4USB port on the list of printer ports without worrying if the driver is installed or is not (uninstalled).

  any suggestion, advice,...? I missed something?

  o, Yes, the pc that I use is hp compaq 8200, Photosmart C4680 printer (all in one).

  Thank you

  Hi pcwizard,.

  I don't see your replay. So that's what I did at the same time:

  Fixing HP Digital Imaging Monitor tray application

  (1) I logged of and logged back on - this installer started "TrayApp" once again

  (2) when I was prompted to specify the path to the installation files I've come to the place where I unzipped full package files and clicked OK

  (3) there was some additional prompts to specify the path to the installation files different and I repeated it step 2) every time

  This problem asks to tray HP Digital Imaging Monitor.

  Fixing HP Solution Center

  (1) I went to the folder "setup\solutioncenter" in the complete package; There is a .msi file and two .cab files.

  (2) I have a right-click on .msi and chosen the option "repair". This started the installation process (simple left doubleclick run application but returns the error).

  (3) I restarted computer when prompted

  This fixed solutions Center

  Yes, during the race configuration according to your instructions to reinstall the full package (I don't see any possibility of a chosen what to install) the steps I made allowed me to install the just specific application (Solution Center). But obviously, this installs only application or module for which particular .msi was created. If some features require several applications/modules, it can be difficult to reinstall just this particular feature in this way.