Dell WiFi laptop computer n5110 removes the signal at random and then starts working again.

Similar Questions

• I got the message "SIM failure" on my IPhone 5.  The first time, I turned the phone off and turned it back on and it started working again.  I got the same message today and by turning the phone then next turn did not eliminate it.

  message "SIM failure" of "no SIM".  1st time it happened I turned the phone off and turned it back on and it was OK.  It happened again, and this time cut off and back on does not the phone is working correctly.  Cannot make or receive calls.  Nothing has ever changed with my carrier.

  First get a replacement SIM from your operator. If this does not fix it you have a hardware problem.

• my keyboard has sometimes unresponsive, despite verified the above. Then it works again after I have shut down and restart my mac. is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the ti

  Jin

  Sometimes, my keyboard stops responding, despite the checkist troubleshooting.

  Then it works again after I have shut down and restart my mac!

  is this normal? If this isn't the case, that due to an application? for example, I installed photoshop and use it all the time... also openoffice document prog...

  What else could be?

  I just replace the keyboard with a new one, but the problem persists.

  my mac has also been in mac repair and they found nothing wrong.

  Thank you!

  Please run and view a report of EtreCheck http://etrecheck.com/

• How can I remove the Windows, "Windows Picture and Fax Viewer" program from my computer

  I use another software Photo and picture Windows and Fax Viewer interferes with my work with the other program. Therefore, I would like to remove the Windows, "Windows picture and Fax Viewer" program from my computer.

  Info for WIndows XP - Windows Picture and Fax Viewer
  ------------------------------------------------------------------------
  OK... but be careful... you'll lose thumbnails of photos in Windows Explorer...
  your 'My pictures' folder... for example... does not display photos.

  And... FWIW... WP & F Viewer is not a program... it's just a .dll file. Disabling
  the .dll file is basically identical to uninstall. (in this way... If you do not
  as the result... you can reactivate).

  But if "gone forever", that's what you prefer... just delete the shimgvw.dll file.

  Attention last... your thumbnails in the Explorer will be gone.

  How... Disable WP & F Viewer

  Click Start / run and enter the following command:

  Type or copy/paste...
  regsvr32 /u shimgvw.dll
  (Yes, the space after the 2 and you is necessary)

  Press on... Come in...

  (You should see a dialog box indicating:)
  DllUnregisterServer in successful shimgvw.dll)

  How... Reactivate the WP & F Viewer

  Click Start / run and enter the following command:

  Type or copy/paste...
  regsvr32 /i shimgvw.dll
  (Yes, the space after the 2 and space after that the i is necessary)

  Press on... Come in...

  You should see a dialog box stating:
  DllRegisterServer and DllInstall in successful shimgvw.dll

  To remove shimgvw.dll go to the following folder and do a right click Delete shimgvw.dll.

  C:\WINDOWS\system32\shimgvw.dll

  If you can't find the path, you must go to...
  Button start / Control Panel / folder Options.
  See tab /... to check "Show hidden files and folders"...

• I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  I can't connect to the network wirelessly with my Dell INSPIRON laptop because I get the automatic Wireless Configuration error, see Article 871122

  Try this below and see if it help you.

  http://support.Microsoft.com/kb/871122

• I have 2 laptops and one desktop. Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help. I use Windows XP

  I have 2 laptops and one desktop.  Desktop & laptop are very good. 2nd laptop computer cannot access the internet. I get a message media disconnected. I tried everything please help.  I use Windows XP

  Hi JessaRoy,

  · The computer connected to the network or are they computer autonomous?

  · What is the number and the model of the computer?

  · What is the service pack installed don the computer?

  · What is the full error message with the error code, that's all?

  · What are the steps you tried to solve the problem?

  Try the steps from the link below: to test TCP/IP connections by using the ping and the commands net view: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/sag_tcpip_pro_pingconnect.mspx?mfr=true

  With regard to:

  Samhrutha G S - Microsoft technical support.

• PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION

  Ideas:

  • PCG 4A1L LAPTOP COMPUTER WHICH HAVE THE SYSTEM OPERATION
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I'm sorry to hear that. In a little more detail would be helpful. Crystal Ball (tm) says when you turn on the computer you get an error message that says somethng like "cannot find operating system". If Crystal Ball (tm) is correct, your hard drive is dead or your motherboard is a failure. Pull the drive and put it in a disk enclosure or use an adapter and test it on a working machine.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  If Crystal Ball (tm) was cloudy, please specify exactly what is happening with your computer. MS - MVP - Elephant Boy computers - don't panic!

• on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  on my office shows... Could not load or run ' C:/Docume/user/locals/temp/csrss.exe specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  Hello

  · Were there any changes made on the computer before the show?

  I suggest you to run the audit files system analyses on the computer. You can check the link for the procedure: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  Adding to it, I suggest to run online virus scan and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Could not load or run 'pythizer.exe' specified in the registry. Make sure that the file exists on your computer or remove the reference to it in the registry.

  I get this error "could not load or run 'pythizer.exe' specified in the registry." Make sure that the file exists on your computer or remove the reference to it in the registry. Whenever I turn on my computer. I found and deleted the file, but this error keeps coming back. HELP ME PLEASE!

  The Startup tab looks like the registry.
   
  Try this utility that searches in less common places
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx?ppud=4
   
  Maybe another program trying to start pythizer.exe that is not a
  message we get from booted windows of programs.
  --
  ..
  --
  "Jonny G" wrote in message news: 2a8f4e05-44-cf-480C-8056-7e895939c845...
  > No go I'm afraid. Doesn't seem to be in the start menu. Is there a way
  > watch the "registry"?
   
   

• Print screen does not work on my windows 7. Samsung laptop computer. Tried the fn, alt, cont + prt sc

  Can't just 'print screen '. Have to go to paint, home, paste, save, name the file, select jpeg and then save again. Then go to the file and print it. On my old computer

  I just clicked on print screen. Any help out there?

  I'm not 100% clear what you mean - you say that you "click" print screen - where & in what program? Do you mean the print screen on your keyboard key?

  Here's how the print screen button key keyboard should work...

  The Print Screen key does not immediately print on the screen, as the name might make you think - it's a bit wrong to foreground. Instead, it copies the current image of the screen to your Clipboard. You can then paste this image into a program type photo editing (or similar) so that you can edit it or print it from there.

  Another way of the foregoing is by pressing Alt + print screen on your keyboard - it's exactly the same as the above, but the image on the Clipboard is only the active window.

  Please see:

  http://Windows.Microsoft.com/en-GB/Windows7/take-a-screen-capture-print-your-screen

  and,

  http://windows.microsoft.com/en-GB/windows7/Using-Paint .

  If the above does not answer your question please can you explain your problem more clearly so that we can help you.

• How can I secure my laptop when I surf the internet via a public router at work?

  How can I secure my laptop when I surf the internet via a public router at work? I mean if I use a router to work and others use too and I use a private laptop! I heard that someone hase the knoladge he can enter my laptop the couscous that he uses the same router I do. you have a special program for that, or is there a place in my computer that I need to enable to avoid the unwanted entries?

  If your Windows is updated and your Windows Firewall is enabled and that you have updated anti-virus, that would be fine. In Windows 7, you must check Action Center in Control Panel to see your security status, if something is wrong that it will show a message in Windows XP and Windows Vista, he calls the center of security.

  They may only enter your laptop or hack, if your firewall is disabled or there is a vulnerability in your system or a Malware would cause of vulnerability, and in all cases to ensure that your Windows updates and anti-virus is running, you are protected.

  Another thing is that if your router requires the password, then choose strong password and change it regularly, if it is public without password or authentication, then you need to careful when visiting Web sites because they could be monitor and publicly display information. Some websites have encryption that in Internet Explorer, it shows as a lock icon pad indicating that your transaction is encrypted and you're safe.

  It depends also wireless encryption in your company that will be in service by admin or SOUND Department if it's WPA2 which is good but for WEP or WPA, you should be very careful. I suggest to discuss this issue with your COMPUTER service too.

• Is it ok to uninstall/remove the XP in 2001 and 2005 software updates?

  Is it ok to uninstall/remove the XP in 2001 and 2005 software updates? I have a whole list of updates over the years. Should I just keep piling up? Or they build with each other?

  Original title: is it ok to uninstall/remove the XP software updates from 2001 to 2005? I have a whole list of updates over the years. Should I just keep piling up? Or they build with each other?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/can-i-delete-over-100-foldersfiles-with-a-name/dfa16261-f3d0-4ab7-b519-91631b44b3de

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous.

  I have them would be reduced by 700 MB.

  Make my computer right click on your icon, and select System Restore.

  Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output.

  When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline.

  Setting the default value is 3% of the walk.

  Depending on your attitude to copies offline, you could bring it to 1% or 2%.

  In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change.

  At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk.

  Change to 5%, which should be enough.

  In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%.

  However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive.

  In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc.

  These files can be compressed or not compressed.

  If compressed text the name of the folder appears in blue.

  If not compressed you can compress.

  Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space.

  On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  Select Start, all programs, accessories, System Tools, system information, Tools, Dr. Watson, and make sure the box in front of "Add to the existing rating" is NOT checked.

  This means that the next time that the log is written it will crush rather than adding to the existing file.

  The setting of maximum size by default for Event Viewer logs is too big.

  Reset the maximum value for each log from 512 KB to 128 KB and set it to crush.

  http://support.Microsoft.com/kb/308427/en-us>

  Select Start, all programs, accessories, System Tools, disk cleanup to empty your trash and delete temporary Internet files.

  Also select Start, all programs, accessories, System Tools, disk cleanup, more Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter.

  --

  I quote Gerry C J Cornell - a regular contributor here

  UTC/GMT is 21:33 Tuesday, April 17, 2012

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• When I closed my Windows Vista computer, it reached the "Logging Off" screen and seems stuck.

  Sporadically, when I turned off my computer, it reached the "Logging Off" screen and seems stuck.  I walked away from my computer for a returned more than an hour to find the screen always showing "Logging Off" with the small circle in the middle of spinning.  The only way I can close down is to do it manually and then when I use the computer at a later date, I ger the message that my computer has been shut down improperly and I should log in safe mode.  This happened only since I upgraded to Windows Vista.  My computer is a Toshiba laptop Satellite P105-S6147.

  original title: Shutting Down computer

  Hello

  Please, try the suggestions made by the former MVP Malkeleah in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-stuck-at-logging-off-screen-after-trying/d99659e2-03d4-4b18-b3f1-cba3a438f07e

• I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please

  I have a Dell Inspiron 1525, I deleted all the temp, %temp% files and emptied my Recycle Bin and now no program is running, they're going to crash just when open, help me please :(

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.