Dell XPS 15 9530 cell phone keyboard single and double quote questions

Similar Questions

• OMB + how to insert single and double quotes in an expression?

  I'm doing the following command of OMBALTER to work:
  
  [MAPPING OMBALTER '$Mapping' CHANGE the ATTRIBUTE '$Attribute' of THE GROUP '$Group' OPERATOR '$Operator' SET the PROPERTIES (EXPRESSION) VALUES ('replace(get_model_name,'"')')]
  
  I can't find the right escape sequence for the part of values.
  
  I want to insert. > replace (get_modul_name, {apostrophe} {quote} {apostrophe}) <.
  
  Pointers?
  
  Best regards, John

  Hi John

  So within a chain in tcl "Hello world, how are you?" you must use the double apostrophe to get an apostrophe;
  "Hello World"' how are you?

  Double quotes can only be added as is;
  ' hello "world" how are you?

  See you soon
  David

• Display Port Dell XPS 15 9530

  Hello

  I have the Dell XPS 15 9530 (Q4 13). Could you tell me if I can connect monitor external throught mini DP and get a complete resolution of 3440 x 1440?

  Thank you for your help.

  Hello

  Yes, you should be able to.  The graphical subsystem integrated (Intel HD 4400) and the discreet graphics card (nVidia GT 750 M) support mini-Display port 1.2 standards.

  Ports video and resolution

  • HDMI 1.4: 4096x2304@24Hz or 4096x2160@30Hz
  • Mini-DisplayPort 1.2: 3840x2160@60Hz

  I hope this helps. Let me know if you have any other questions.

  Todd

• Dell XPS 15 9530 Boot stuck at the logo

  Hello

  I have a Dell XPS 15 9530 with only 10 of Windows installed. After a simple reboot that I noticed that the boot process has started taking a long time (> 5 minutes), but in the end, Windows starts correctly and evertything worked well. I run the diagnostic test and no error is returned.

  Then I tried to restore the BIOS to defaults setting and now the trunk seems to take more time, I'm still waiting for 30 minutes ago.

  The boot process stuck at the point where the Dell logo is visible (I think until all treated windows starts). It's the same thing if I try to enter the parameters of WOOD, so for now I'm not able to access the settings. I don't really know what to do.

  If you have any suggestions, help me a lot :)

  Start by pressing F12 at startup until a start menu appears - start the Dell diagnostics and run a test lying on the system, in particular the disk of hard/SS.

• Activate the touch screen capabilities fresh Windows 8.1 Install - Dell XPS 15 9530

  So, I had one that I puzzled. I just got a new Dell computer yesterday and as I did the last 10 + years, I install a copy fresh retail because, like most people, hate dealing with their additional software and prefer a clean install, so I don't just not deal with uninstallation, etc.. It turns out that that may have been a bad idea. After that the installation has been made, touch no longer works on the screen. I installed the drivers from the Dell site without success. The Device Manager has no missing material and all windows updates are up-to-date. Intel recognition system stylus and touchscreen capability there. I also checked the settings Pen and Touch on the contact tab and everything seems to be OK (everything I compare these parameters on is a Dell coming Pro 8, but they are the same). My suspicion and I might be away on this, is that I use a copy rather than the OEM of Windows 8.1 copy retail. I got tired of a Pro and a regular retail (Yes, two legal copies) and none worked. I don't know that new computers have the key embedded in the uefi (bios). I tried to install with or without the embedded key substitution. But it's the only thing I can think of and I hope you guys had a few ideas or someone else has had this problem and can help me to solve the problems. Model: Dell XPS 15 9530 with QHD touchscreen monitor +. Update: I discarded retail vs oem fresh installs. I tried an installation using backup/restore of Dell disks. Same deal. It is to be some sort of setting or driver who is not on their site.

  I cannot yet understand what has gone wrong, but Dell pulled out and swapped the screen out and it works perfectly. I swear it worked out of the box, so I have no idea how the material do not so fast, but the good news is that it is fixed!

• What is the difference between single quotation mark (') and double quote ("")?

  What is the difference between single quotation mark (') and double quote ("") in reports using SQL. When you use "xxx" and "xxx"? What is the difference of two of them?
  
  Thank you.

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10592/sql_elements008.htm#SQLRF51129
  http://download.Oracle.com/docs/CD/E11882_01/AppDev.112/e10472/fundamentals.htm#LNPLS199

  Edit

  What is the difference of two of them?

  In fact: it is better to simply forget double quotes ;)

  Published by: hoek on October 23, 2009 21:22

• Dell XPS 15 (9530) Flawed mSATA Setup

  I've had my new XPS 15 4 days now, and overall, it's a very impressive machine. I got the middle range (with 1 TB of HARD drive). However, I wish to inform the community on certain issues I'm having, and to publicly display this particular machine is available with a wrong setting.

  My model comes with 16 GB of memory system. It has a 32 GB mSATA player intended to be used to start fast Intel and Intel Rapid Storage. The mSATA is partitioned with 8 GB for Intel Rapid Start, and 22 GB for Intel Rapid Storage. However, Intel clearly documents that you need a score equal to the size of the system memory for Intel Quick start working. http://www.google.com/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&cad=rja&sqi=2&ved=0CDIQFjAB&url=http%3A%2F%2Fdownload.intel.com%2Fsupport%2Fmotherboards%2Fdesktop%2Fsb%2Frapid_start_technology_user_guide_for_uefi1.pdf&ei=m1OHUpzGAdPpkAfE8YGIDg&usg=AFQjCNH7Rh6iQN6hSR0Ry3oBF6kGmxgjaA&sig2=e--yKMT7hoApFUI_7kMyEA This makes sense because what he does is write an image of the system for the SSD memory.

  Therefore, Intel Rapid Start does not work on the XPS 15 9530 midrange... I noticed this because it starts slower than my old laptop Inspiron 15 with its Crucial SSD.

  Unfortunately, we can not solve this problem to repartition the mSATA. If you dedicate 16 GB on the mSATA to start fast Intel, only 14GB remain to Intel Rapid Storage, which requires a minimum of 18.6 GB at work.

  Dell needs to ship this model with a larger mSATA for both technologies work.

  Now I have really no better personally, my intention was to recycle my 512 GB Crucial M4 as boot drive by performing a Windows Installer Cleanup on it. This would allow me to devote the entire mSATA to Intel Quick start. Unfortunately, this system is not delivered with Windows Installer records. And I can't order one like Dell system does not recognize my Service tag. I tried to use the resettlement factory disks I did to reinstall on my SSD, but they won't let me not reinstall it to a smaller drive. I could destroy the partition of 6.96 final recovery, reduce the primary partition, and then clone the disk with Clonezilla, but my intention was to maintain the original drive as backup and the SSD would not align correctly.

  Another issue I had was the McAfee Firewall which is preinstalled prevented me from affecting a second private network. I uninstalled it after failing to find a solution. Windows Defender appears to be adequate antivirus and its much easier to the value of the 2nd private network with Windows Firewall.

  Overall I am very happy with my new computer, but I don't think I'll be really happy until I can go to the SSD. I can solve this problem by ordering a 1 EVO to Samsung of TB, but makes me the high XPS 15 9530 until the price, and I didn't go. And I would always have the alignment problem, if I clone the drive. So I hope that my service tag will be recognized soon allowing me to order the disks to reinstall Windows.

  Well, it took a while, but I solved this problem. And I did it without having to reinstall Windows!

  (1) I disabled caching in the Intel RST utility. I then removed the HARD drive, he and an SSD on a desktop connected and Clonezilla to clone the SSD drive.

  Put the SSD in the XPS 15; boots fine and fast.

  2) switch to AHCI mode (necessary to optimize SSDS and remove Intel RST):

  Open a command prompt and run the following command to enable safe mode start:
  bcdedit/set {current} minimum safeboot
  Restart the computer and start the system BIOS.
  Change the setting from Intel Rapid Storage (RAID) in Mode AHCI ATA drive
  Click Yes to the warning on the change of mode detected on the ATA embedded controller.
  Normally, the system starts in safe mode.
  Open a command prompt and run the following command to remove the safe mode startup option:
  bcdedit /deletevalue {current} safeboot
  Restart the computer and boot up normally. You will notice mSATA is not recognized at all.

  (3) recognising the mSATA

  Windows I, open Control Panel, hardware, Device Manager
  Select the IDE controller, controller SATA Intel, update driver software
  Let me pick from a list of device on my computer drivers
  Select the 2nd driver - the Microsoft Intel (r) 8 Series SATA AHCI Controller - 8 03
  Reset. Upon restart, the mSATA will recognize.

  (4) repartition mSATA
  Windows key, diskmgmt.msc. You can now see and delete the Intel Rapid Storage cache partition.
  Windows key, cmd, open as administrator
  DiskPart
  Select disk 1
  Create partition efi size = 16384
  the game ID = D3BFE2DE-3DAF-11DF-BA40-E3A556D89593
  to exit
  Windows key, diskmgmt.msc. You can now partition the remaining space on mSATA if you wish.

  Now you can completely uninstall Intel Rapid Storage (unnecessary with SSD).
  You can put a bigger mSATA in system and use it for storage. He can probably set up for dual

• Dell XPS 8700 - failure of the keyboard when the bios boot (but not when Windows is loaded)

  My Dell XPS 8700 has 10 Windows and a Logitech Keyboard wireless, connected by USB. The keyboard works absolutely fine when Windows has loaded. I have the latest version of the bios, A11.

  However, when the computer is turned on and starts the bios start, it displays 'Keyboard Failure' on the screen for about half a second. When I try to go into the bios setup by pressing "F2" at the counter (I keep typing "F2" from the moment when I press the power button on the computer), there is no answer. The "keyboard failure" and inability to enter the bios setup seems to happen if I do a cold immediately after a stop start, a cold start after the computer is turned off for an extended period or a reboot.

  I tried to connect the wired keyboard original Dell one of the USB ports on the front of the unit (without disconnecting the wireless keyboard) with the same problem at the start of the bios.

  I encountered this problem on versions of bios A11 both A03. I know that in the past, although I don't remember when - I was able to enter the bios setup by pressing "F2".

  Any thoughts on how to solve this problem?

  You can try and reset the CMOS. It will return your settings to factory settings, but not the version. Usually, this erases these problems because CMOS stores data editable such as your wireless keyboard settings. BIOS stores the information about the basic material that is unchangable as your keyboard usb, mouse and other essential equipment. If you notice, when you just plugin any keyboard and mouse, its recognized at startup. Your needs software to run wireless device and that is stored in the CMOS.

  So once reset you the CMOS, you may need to then install the wireless software.

  Good luck.

• Tap the wire of the damaged Panel: Dell XPS 15 9530

  Hi, my XPS 15 9530 touch screen no longer works. The thread for the touchscreen that emanates from the display panel and goes into the motherboard seems to have burned to a point. I don't know why it burns all of a sudden. Is there a way I can change this thread without replacing the whole display unit?

  Any help or suggestion is appreciated...

  Thank you

  (ps: I m out of warranty)

  Unfortunately, no - Assembly is melted and the adhesive.  It is very unlikely, you would be able to remove the glass without breaking, and even less likely you will end up with an Assembly of work when you re - assemble.

  There are two possible causes - a wire shorted out of being crimped together is one.  A second would be a fault of power with the motherboard that has sent too much power through the cable and fact it is overheating.  You can consult the repair to a professional so that they can determine what happened before spending hundreds of dollars on a screen only to find out that you need to spend as much or more on a replacement of the motherboard as well.

• After reinstallings windows xp on dell XPS 420, he will not recognize modem and modem support moved disk

  I have a Dell XPS 420 I got help from this forum - reloaded Windows XP - reformatted successfully in car and now have Windows XP on the drive.  When I try to connect to the internet and set up this internet connection - will not recognize the modem.  When I put the disc inside modem will automatically the configuration menu of the computer.  I don't know what else to do.  I have AT & T internet service that worked perfectly before the reformat Windows XP works fine.

  Hello

  Refer to this link and check:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/XP-SP3-wont-recognize-internal-software-modem/06471daa-c761-4CE3-a8a6-ee01f5629852

  It will be useful.

• Dell XPS 15 "display driver igfx stopped responding and has successfully recovered."

  Hello

  About 3 - 4 times a day while working, my computer hangs for 1 - 2 seconds and I get a message saying my display driver crashed and has fully recovered. In the event log, I see a warning saying:

  "Display driver igfx stopped responding and has successfully recovered."

  I have a Dell XPS 15 10 Windows running with the latest updates. It has a Intel (r) HD 4600 Graphics and an NVIDIA GeForce GT 750 M graphics card. I also use a Dell D3100 3 USB docking station, however I notice the issue with and without this used.

  I tried to install the latest drivers for the NVIDIA card. I am currently using "10.18.13.5906".

  Any ideas on how to solve this problem?

  See you soon,.

  Mark

  Latest drivers work for me, Yes.

• No audio on all Dell XPS 15 (9530)

  I installed a new copy of Windows 8.1 Pro instead of the preinstalled version of kernel and after that I can hear noise when you use the native Windows driver ' device high definition audio ", not Realtek driver att Dells download site. Tried everything uninstalled drivers with deleting files, verified that "Realtek High definition audio" is by default and so on. Anyone have any suggestions?

  I did have the chance to watch 10 again. Here are a few ways of Windows 7 that would work.

  ===========================================================

  Switch to the native driver the Realtek driver is running.

  1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  3 Select this option to "Update driver software".
  4. click on "Browse my computer for driver software".
  5. click on "Let Me pick from a list of drivers on my computer".
  6. put the "Show compatible hardware" check box if not already checked.
  7. in the list of devices, click on 'High Definition Audio"(native driver).
  8. click on "next".
  9. in the update driver warning box, click 'Yes' (the driver).
  10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  ==================================================================

  Remove the Realtek driver. Right click on it in the Device Manager. Uninstall. Put a check mark in the box "remove the software for this device." Reboot to remove it permanently. You need to download a new copy of it to get it back.

• Dell XPS 15 9530 cannot adjust the brightness or resolution

  Hi people,

  I have this laptop 1 day - done a fresh install of Windows 8.1 Enterprise, installed the required drivers from support.dell.com, but for some reason, brightness keys aren't working, in the brightness of Windows is 'not available', nor can I adjust the resolution 3200 x 1800 decline.

  Any suggestions? brightness worked the initial installation of Windows 8.1 that Dell had done, but I had to wipe the image of our company.

  PEEM... my Adaptive brightness adjustment switch is 'ON '. To change: - go to Power Options - click on change advanced power settings - expand the view - expand the Adaptive brightness select - change both on battery and Plugged In OFF - click Apply here... the brightness back...

• Mix single and double folio orientation

  I'm not sure if this is a limitation, or am I wrong.

  I want to build a Folio that has double orientation of some articles and some just horizontal.

  When I do that, I get an error. Is this possible?

  It's all or nothing.

• Dell XPS 12 - will not start / turns on after hard reset

  Last night I was with my XPS w12 in laptop mode on battery and he finally went down to 7% of the capacity.  At this point, it turns off the display and I moved my office to connect the power adapter (thinking it would simply turn the display when there was enough power...  The screen never came back (I waited 15-20 minutes), but the battery has been recharged.  At that time, I tried a hard reset by holding the power button for 5 to 10 seconds.

  When I tried to turn it on, nothing happened.  No backlit keyboard, no screen, just the fan.  The light never came the switch either. So I tried an another hard reset with the same results.  I even tried to turn it on with the "D" button held down for on board diagnostics and got nothing more than the start of the fan.

  I thought it might be an overheating problem, so I let it set for an hour and tried again - none other than the fan. It seems that the laptop does not pass the initial diagnosis and not even up to the point where the bios starts to load.

  I really thought that my cell phone was dead and ready for use.  I took it in the office the next day so I could call Dell Support Pro. Just for fun, I plugged with the AC adapter and tried to turn it on - viola!  It started working again.

  I had this problem once before, and he began to work after 2-3 resets hard. I was working on a proposal when the laptop went down. I tried reset hard over a period of 4 hours with no result. It baffles me why it start OK the next day morning.

  I was wondering if anyone else has had the same problem.  I am running the A07 BIOS (the most common) and my 12 XPS is configured with 8 GB of memory and 256 GB SSD with an i7 and Intel wireless card.

  Any suggestions on this diagnosis? The hardest part is then if fails, the failure is total - you are unable to diagnosis. When she comes back, all right, and there is than any event in the event log that relate to the failure.

  OK - I narrowed down it to the following:

  When the laptop is "asleep", it will finally in power mode. It seems that connect a power adapter for the laptop at this point will enter a State of confusion, when the button is pressed, the laptop fan turns on but no light on the power button or on the keyboard – the screen remains blank.  Laptop fan works (it is very quiet - he must hold the phone to your ear to hear it).

  I don't know if the cause is a low battery or if the issue is simply with the State of the CPU to power down.  All I know is that when it happens, if I disconnect the power adapter and press and hold the power button until the fan of the laptop turns off, the hard reset allows him to come back normally.  If you leave the adapter attached, it will charge the battery but will not allow the laptop start.

  I said this experiment several times with the same result every time. I'm guessing that there is a bug in the BIOS that defines an error state that are resolved with the associated power Board. Do the hard reset without the adapter seems reliable to fix the problem.