demand align the Web runtime

Similar Questions

• Internal error during the installation of DirectX for the user final web runtime install

  Hi all

  I was browsing the forums and reading the discussions that relate to my question.  Unfortunately, each of the solutions that I found do not seem to solve my specific problem.
  I recently got a new laptop (Dell E6540) and thought I'd try world of combat aircraft.  My old laptop did not have a graphics card that has been up to the task, but I think this one does.
  I am running Windows 7, which integrates the latest version of DirectX (11).  I downloaded and installed the game, and when I click on 'Play', I get the message informing me that I'm missing the d3dx9_43.dll.  I then visit the Microsoft Download Center and try to download the installer of web runtime DirectX end-user.  Following the installation of the components in the stage of finalisation of the web installer, I get the following message:
  "An internal system error has occurred.  Please refer to DXError.log and DirectX.log in your Windows folder to determine the problem. »
  I then click OK in the error message, the web installer shows failed to install, so I click "Finish."  At this point, the popsup Program Compatibility Assistant, saying: the program may not be installed properly and gives me the opportunity to 'Reinstall using recommended settings', what I'm doing.  Then run the web installer a second time, giving me the same error internal system presented above.
  I wonder if someone might have suggestions as to how I can resolve this issue (or to find the above mentioned .log files).
  Thanks for your help.

  While Win7 installed DX 9, 10 and 11 it does not install with all files.
  d3dx9_43.dll is the latest DX 9 files.
  The best method when you have not already updated DX is to use the DX Web Installer,.
  then you can try using them.
  Download DirectX end-user Runtime Web Installer from the official Microsoft Download Center

  If you have the same problem with the DX Web Installer trying to boot into Safe Mode with networking
  and try to run the installation program from there Web DX.

  -L' Web Installer does not overwrite the DX files, it only installs the DX 'missing' files, so when it
  is a DX of corrupted files and you do not receive an error with the name that you will need to use the full
  DirectX Redist (2010), which I assume is what you are trying to use, as this will overwrite all the
  DX files.
  -Similarly, you can use Safe Mode (networking not required that you have all files) may
  be used when there is a problem installing DX with the complete installation program.

  -When there is a corrupted file of DX and you get the name of this file, an error, as with
  your d3dx9_43.dll, you can delete this file in System32 (sysWOW64 when using 64-bit
  Windows) and when you run the Web Installer will replace the now "missing" with a new file
  copy.

  Absence of the foregoing, it may be your problem is more to do not have the necessary permissions to
  install the DX.
  This could be due to UAC settings too high, does not not as administrator or another
  restrictive framework, maybe even your anti-virus (disable temporarily when trying to install DX).
  Try - R / click the DXSETUP.exe. Then go to Properties-compatibility and check the box
  next to the race... as an administrator.
  .

  .

• By aligning the Center in Dreamweaver Web page

  Hello. I am a beginner and I'm trying to align the second page of the entire site. I managed to center align perfectly the first page by clicking on the border, but when I export the second page of Photoshop, Dreamweaver CSS code appears and it's the only thing different from the two that will not let me choose the border, so I can center align. See the first page a + 280 lines of code, while a second + 400 lines. Also, I can't find the zoom tool. If please see the images and hope an answer from someone.

  

  

  

  

  The construction of the two pages are completely different, the first page makes use of TABLE for layout, the second page uses DIV to its layout.

  The first page is centered using the align property as in the table

  Align = "center".

  The second page is trying to align the page by applying an automatic to an element with an ID of principal as in margin

  #main {}

  margin-right: auto;

  left margin: auto;

  }

  But it won't work because the width of the element is not known. If we add a width as in

  #main {}

  margin-right: auto;

  left margin: auto;

  Width: 1281px;

  }

  you will notice that the page has been centered.

  Having said the above, I shudder when I see the construction of two pages. I think you need to catch up with markup (HTML) and style (CSS) before you tackle the creation of web pages.

• run or print output to the web form developer Oracle runtime

  Hi guys,.
  
  I have installed oracle forms10g in windows 7. I'm using firefox v.2. When I run the form, the web Oracle developer runtime form does not open. the output is exposed in the mozilla firefox itself.
  
  But how to run or display output to web runtime Oracle developer forms?
  
  Thank you in advance

  What is the problem? What do you mean with the form, the web Oracle developer runtime form does not open and the exit is exposed in the firefox of mozilla itself?

  Is the form open or not? If you see that you are, where ever, then the 'runtime' is underway!

  It's poster in the window of the browser? But you expect it in an own window?
  If this is the case, you must set separateFrame = TRUE in fomsweb.cfg.

• How do I top align the table on the Web page to the top of the browser?

  If you look at www.colonialstock.com, you will see that the Web page was made in a tabular format.  How do I best align the table, then the gray space above the table is removed?

  Add this to your body tag...

  LeftMargin = "0" marginheight = "0" marginWidth = "0" topmargin = "0".

• sides of my layout of the Web site are not aligned correctly - view this thread for a much better understanding!

  The sides of my layout of the Web site are not aligned correctly, and the image is slightly moved above.

  To much better understand what I mean... First discovered my site here: http://www.clanmog.hostei.com/ - I noticed that this problem only occurs in Firefox (to my knowledge) and not Internet Explorer. It does not have this in IE, but Firefox does.

  then look at this image: http://img261.imageshack.us/img261/7210/helpme.PNG

  How can I solve this problem?

  At a glance I'd say it's because you are clearing out the average divs, but not others. This changes the alignment calculations...

  Mylenium

• Align the text on the Web site

  Click here to see the page temp IM talking about
  I want to align the text "published by Imagine it! Media, Inc."with the right edge of the book... the book is: width 850 = 750 height = and < td align ="center"valign ="middle">
  < center >

  Change this:

  http://www.imagineitmedia.com "target ="_blank">"
  Published by Imagine! Media, Inc.

  to do this:
  

  http://www.imagineitmedia.com "target ="_blank">" Published by Imagine! Media, Inc.

• Embedded YouTube videos work locally, but not after the FTP publishing. Works locally and on the web in all other browsers. Using FF 17.0.1 and Adobe Flash 11.5.502

  Found a Tube-video, which I embarked on one of the pages of my site. Using FF 17.0.1 and Adobe Flash 11.5.502, YouTube-videos work locally, but not after the FTP publishing.

  I work reasonable locally and on the web in all other browsers.

  Stupid FF?

  The HTML code is as follows:

  <table WIDTH="770" CELLPADDING="0" CELLSPACING="0">
    <tr VALIGN="TOP">
      <td VALIGN="top" ALIGN="left" width="463">
  <object WIDTH="340" HEIGHT="193">
        <param name="movie" value="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE">
        <param name="allowFullScreen" value="true">
        <param name="allowscriptaccess" value="always"><embed SRC="http://www.youtube.com/v/N6GvuO_9tLY?fs=1?amp;hl=de_DE" TYPE="application/x-shockwave-flash" WIDTH="340" HEIGHT="193">
      </object>
  </td>
      <td VALIGN="top" ALIGN="left" width="403"></td>
      </tr>
  </table>

  I've experimented on the use of < iframe > instead of < object >. No change. Cache cleared on each attempt.

  Any thoughts?

  If it works in Firefox Safe mode and then disable all extensions (Tools > Modules > Extensions) and then try to find out who is causing by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  Alternatively, you can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• A query on the LabVIEW runtime engine.

  Can I access front of LabVIEW through Internet Explorer even if I do not have LabVIEW installed in my computer?

  The LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  > Can I access front of LabVIEW through Internet Explorer, even if I do not have LabVIEW installed in my computer?

  Yes

  Server must have the labview, labview Web Server runtime and should be run remotely front panels.

  > LabVIEW runtime engine works in this situation without the help of LabVIEW software?

  Does not understand the question.

  Engine run LabVIEW is a LabVIEW software, which is required to run files executable labview. In the case of remote façade panels screws (exe) running on the server that has the run-time engine. Page Web you are viewing in the browser (client) gives you a picture and monitors where you click on it. It passes those clicks to the server, it changes picture accordingly (going on those clicks for labview, gets the update of this photo). Customer does not screw, so should not be the runtime of LV.

• Additional installers do I need to use the web server?

  I am building an application in LabVIEW 8.6 and want it includes the Web of LabVIEW server and eventually Web Services.  Should additional installers I include?  In addition to the runtime, the following options are: 'LV Web Services', "NI LabVIEW Run-Time Engine Web Server", "NI LabVIEW Web Server."  I can find no documentation explaining the differences between these - especially the last two.

  Hello Nathan,.

  From 8.6 web server is a separate component. Just as LabVIEW desktop is a separate installation program since the runtime if there is a web server for each component. In addition, Web Services is a component that is generated on the web server.

  So, if you need web server in the Office two, LabVIEW and RTE and you eventually will need to deploy web services, as well, then you'll need to install these components.

  Here's our FAQ to get Web services work - you might be useful.

  FAQ Web services

• WRT110-problem accessing the Web-based Setup Page

  I can't access the configuration page based on web for the WRT110 router I have. I am able to make a connection on two computers without the router, but when I add them I get an error message in my browser.

  I tried to access the configuration page based on the web both of my computers and some information were followed by Ecritel.net, but I'm having no luck. I receive the following error message "missed connection: connection to the server was reset while the page is loading." The network link was interrupted for negotiating a connection. Please try again. »

  Any advice would be greatly appreciated! Thank you!

  Actually, I get a different error message now. I made a few adjustments to things like the start menu, which is a problem before. Here is the new error message I received:

  Network timeout Server 192.168.1.1 takes too long to respond. The requested site did not respond to a connection request and the browser has stopped waiting for a response

  Can experience the high demand server or a temporary outage? Try again later.

  Are you unable to navigate to other sites? Check the computer's network connection.

  Is your computer or a network protected by a firewall or proxy? Incorrect settings can interfere with browsing the web.

  Still having trouble? See your network administrator or your Internet service provider for assistance.

  Someone at - it ideas? I searched on the Internet, but nothing I've tried works. Thank you in advance!

• Connection error to the web proxy signer

  I get the following error when I try to sign the cod files:

  "Error connecting to the web proxy signer."

  RIM sign services down?

  RBB = 1993325328http\: / /www.rim.net/Websigner/servlet/BBApps
  RRT = 1993325328http\: / /www.rim.net/Websigner/servlet/Runtime
  CPR = 1993325328http\: / /www.rim.net/Websigner/servlet/CryptoRIM

  I think I got the answer in the meantime:

  http://isthesigningserverdown.com/beta

  If all goes well they will be until shortly after.

• Measures to develop the Web Application with JDeveloper 11.1.1.6.0

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop an application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  (3) web Server: Web Logic 10.3.6.0 and JDK 1.7.0_09

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  To develop the application for Admission online, I made the 4 parties with WebLogic 10.3.6 and JDK 1.7.0_09 as below:

  (1) install ADR (Application Development Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create a WebLogic 'Domain_CS' domain in WebLgoic 10.3.6.0 in support of MARC 11.1.1.6.0.

  (4) install JDeveloper 11 g 11.1.1.6.0 Studio Edition including WebLogic 10.3.5.0.

  The development environment for the online application for Admission is JDeveloper 11 g 11.1.1.6.0 Studio Edition. I just installed this PeopleSoft system. I don't have any experience using it. The first step is to run the command:

  $./quickstart.sh

  JDeveloper 11g Quick Start Menu appears as below:

  1) start with WebLogic Server 10.3.5

  (2) launching Oracle JDeveloper 11 g

  (3) set up areas for Oracle ADF

  (4) access Oracle JDeveloper 11 g Documentation Online

  (5) domain upgrade to version 10.3.5

  (6) access online documentation

  I don't know the outline of comprehensive measures to develop the Web Application with JDeveloper. We will understand that it out by steps associated with Quick Start Menu.

  My questions are:

  (1) do I need to create or extend a field in WebLogic 10.3.5.0?

  (2) how to develop the Web Application with JDeveloper? How connect JDeveloper with WebLogic 10.3.5.0?

  (3) how to configure the domain for the ADF ADF being installed in another directory?

  (4) folk would provide the outline of measures to develop the Web Application with JDeveloper?

  Thanks in advance.

  Sorry, I don't work with AAWS or PeopleSoft products. You have searched on Google for samples?

  Ultimately AAWS are just web services that allows you to collect and send data. You create the user interface as you would for any web service based on the model layer. Start with samples for the integration of web services in the ADF to familiarize yourself with the process and then try to get some data of AAWS.

  Timo

• Try to make the web content sensitive iFrame

  I was search and try and pray I can get this answer...

  So, I'm adding an iframe that contains another website it contains.  The site is sensitive on its own, but of course not inside is iframe.  In Muse, I tried styling the iframe by adding the code css above her, but she's 'style' diplay in the iframe above the Web page.  Now I'm sure that's not so difficult, but I am a novice.  That's what I'm doing (false):

  . Happy {}

  Width: 50%;

  margin: 0px auto;

  }

  {.embed-container

  height: 0;

  Width: 100%;

  padding-bottom: 56.25%.

  overflow: hidden;

  position: relative;

  }

  .embed-container iframe {}

  Width: 100%;

  height: 100%;

  position: absolute;

  top: 0;

  left: 0;

  }

  " < iframe name ="select Resorts' src = ' http://www.tlselecthotels.com "width ="1224"height ="700"frameborder ="0"scrolling ="Yes"style =" width: 100%; "> < / iframe >

  < < < < < < <

  Okay, so I had that site Web on the contribution of the iframe reactive and appended to the url for the content of the iframe.  If anyone can, please give me some clarification here.  Thanks advance!

  • you are not using css in an iframe
  • you set your iframe example on 1224 is the size a browser will try to do it and that substitutes responive design
  • You can assign to the iframe "sufficiency of browser" or "width of responive", using styles of Muse and the prob is what you want?

  example = iframe | Tutu BG1 & 2

  

  in any case, it's a bad idea to set a margin within an iframe, but it's your choice of design... Note that the first number series are intended for the iframe itself and the second (after the CBC) is what inside an iframe... demo code is less than

  
  http://www.tlselecthotels.com/"style =" color: #0000FF; text-align: left "> view as new Page"

• Can't remove 'autostart' music on the Web page

  Tried all day to eliminate the 'autoplay' music on one of my Web pages where I included a video clip. Having watched several Youtube videos on 'false' to auto-start adding. No luck.

  Here's what I have in the code:

  < embed src = "thoughts soar Pages/MOVIE with music.mp4' width = '570' height = '451' autostart ="false"> < / embed >"

  < /p >

  < p > < / p >

  < p > < a href = "index.htm" > home < /a > < /p >

  < p > < / p >

  < p > < / p >

  < p align = "center" > < / p >

  < / body >

  < / html >

  Thoughts? Suggestions?

  Thank you very much!

  (I'm pulling out my hair.  ;-))

  According to the HTML5 specification, autostart is not listed as an attribute for the element, which probably explains why it does not work.

  Use the

  Furthermore, you should not have spaces in the names of files and folders on the web.