Demo of Panel body no longer works

Similar Questions

• APEX 5, interactive report remove 'Control Panel' script no longer works

  I'm trying to hide (remove) interactive report 'Control Panel' captured below so that users cannot change the report either.

  

  I found this thread here.

  https://community.oracle.com/thread/3686632

  Remove the interactive report 'Control Panel' script no longer works

  I tried #1 and #2. The two does not work in 5 APEX.

  By #3, I'm not sure that I put the code in the right place. But I loved not below, and it does not work.

  Can someone help me hide from opening the page control panel?

  1. in the footer

  < script type = "text/javascript" >

  $x_Hide ('apexir_CONTROL_PANEL');

  < /script >

  2 (page inline css section)

  Table #apexir_CONTROL_PANEL {display: none ;}}

  3 to implement a dynamic action on the page to hide the control panel at help:. this.affectedElements.find hide() (".to-IRR-controlsContainer"); the loading of the page.

  

  Kiran Pawar says:

  Hi JonDaegu-Oracle,

  JonDaegu-Oracle wrote:

  I open this IRR with this url a bit of a wiki page and I want to open this IRR without any user input and make it look like a page static as much as possible.

  .../f?p=200:21:0::no:CIR:IREQ_RELEASE,IREQ_PLATFORM:11.2.0.4,Linux:Yes

  And I tried your solution and it does not work yet. Am I missing something here?

  Set your static region ID like IR: customer_ir

  Ah. The ID attribute is dynamic. It was a busy day.

  It make much sense to do so if the IR has nothing to do with customers. Probably a better idea to use a more generic selector (assuming that there is of course no other IRs on the page):

  .a-IRR-controlsContainer {
    display: none;
  }
  

• Since sensitive Muse updated 2016 my slideshows in the compositions of tabbed panels are no longer works correctly?

  Sites that I had built before 2016 sensitive update of the slideshows used in panels by tabs. These worked perfectly, but now is broken... I get two images of horizontal load in preview or publish and while the images to display the slide show "tent" work as expected they are compensated about 30 px px 30 and left down from the original design. Even creating new ones from scratch creates the same problem! Any help is appreciated as my clients are complaining...

  .

  Hmm... have you tried the suggestions in this article? Adobe Creative Cloud desktop application does not open or shows a spinning wheel of progress

  I would try first to leave the CC app and all the other Adobe products. If the window is empty, you can force it quit Activity Monitor/Task Manager. Then restart CC app and see if she comes to life.

  Anna

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Script no longer works when I remove beep

  I am trying to create a script that will get the number of words in a Pages document, and then save in a Numbers spreadsheet. I am a novice coder and until about 6 hours ago, I got this script, I had never even heard of Applescript. But with trial and error, I came up with this script to display the number of words in my document:

  say application 'Finder '.

  activate

  Set myFile to alias "user: boldfish98:Desktop:Aviator alias.

  myFile Open

  beep

  say application 'Pages '.

            tell front document

  say text body

  the value myCount to count words

                 end say

            end say

            close front document

       end say

  end say

  myCount

  (I posted only myCount to make sure it works, ultimately, it will not display). This script was working fine so I started on the part that would put the number of words in the worksheet. I have made good progress on this front, I noticed a really annoying problem with the above code. When I was working on this part I put a bunch of beeps at different points that I would like to know when the code stopped working. I deleted most of them, once I knew that the code worked and I was ready to move on to the next part. But when I tried to delete one of the beeps (the only one left in the code that I put in this post), the script no longer works. I get this error in script, emphasizing "word count":

  Pages has been an error: failed to get document 1. Invalid index.

  It did not make sense to me so I checked over and over again to make sure that I had not deleted anything else, but it was just the beep. When I put the beep back in at exactly the same place the script developed, when I pulled it again I got the error. Even with my extremely limited experience I am sure that something is wrong and my coding script should not to beep to run. I looked through the internet to see if anyone else has had this problem and found nothing, so I started to browse all the posts here the applescript, and I saw someone ask if error a poster that's happened on the compiling or running. I know type of compilation of what means but I do not know how it is applied to the script editor. I guess this is what happens when I press on save and the light purple text gets formatted with 'say' in "BOLD", "application" in Blue italic and so on. I don't get the error, then, it happens when I run. Sometimes when I run the script with the beep I always get the message, so I think that there could be something wrong with the way I count the words (if you know it please report it), happened only 5% of the time that I run with beep. And it happens 100% of the time when beeping is not there.

  Here are the things I've tried (none of them worked):

  -copy and paste the code without the beep in a new document from the script editor

  -Retype the code without the beep in a new document from the script editor (I got the same error but when I added in the beep it worked)

  -restart script editor and pages

  -restarting my laptop

  -Commenting on the beep

  -replacement of tone with screen of dialogue ("Hello world!")     the dialog box display worked, but after I clicked OK in the dialog box the script stopped running, and I got the same error

  -remove the beep and but leaving empty line

  -remove the beep and the empty line

  -change slightly the other parts of the code as a substitute "document before closing" by "quit".

  a lot of these I didn't work, I was just desperate. I also didn't expect the success of my script a beep. I feel like script editor knows I'm brand new to this and so he's trying to trick me. Any help would be greatly appreciated. And if you know other ways I could improve this code, I'm all ears. Thank you!

  Also I just got this new laptop as a week ago, so I don't think that this problem is related to my software is obsolete.

  When I tried cela it is line 3 that caused the problem; It should read

  value alias myFile "alias Users:boldfish98:Desktop:Aviator.pages".

  As you, it did not work even with the beep; with this change, he worked with and without the beep. Other than that, "beep" takes back you to the inventor, but I don't see why that should be a problem.

• Synaptics touchpad no longer works on Qosmio G50-133

  My Qosmio G50-133 suddenly lost it of keypad touch, it no longer works, the panel of mouse control shows the synaptics without any inside information tab.
  I uninstalled, rebooted my windows 7 with no luck and I just can not find a driver for it on the toshiba site or anywhere...

  Sosmeone there a clue?

  Hey cool.
  Thanks for the comments.

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• Mouse Touchpad no longer works correctly

  My touchpad mouse no longer works correctly.  I'm unable to double-click, even after changing the speed setting in the control panel.  In addition, items are selected when appropriate without a click. This could be a virus or a definition that has been accidentally changed?  I tried to restore to a previous point, when things were working properly and that did not help.

  Check with your PC manufacturer for support.  You may need to update your driver.

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• Drive DVD RW E no longer works.

  Drive DVD RW E no longer works.

  I'm running a gateway T-1412 with Windows Vista Home Premium Service Pack 2

  DVD RW drive used to work fine, but now when I put music or a DVD in drive E that nothing happens. When I click on my computer and click on the E drive, it opens and tells me to insert a disc that has already been inserted.

  I have tried everything I can think of who isn't much so help is greatly needed.

  Thanks, Dan

  Hello

  Check with Support technique Gateway, their documentation and online drivers.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  ---------------------------------------------------------

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burn
  and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hello, bright on top of keyboard touch-buttons no longer work.

  I have a Pavilion dv7-3065dx notebook.  With windows 7.

  The lit touch buttons near the screen (in accordance with the power button) on top of keyboard without function longer. As well as the light for the numbers pad.

  I have no idea why these buttons no longer work.

  Please help, thanks.

  First uninstall Hp Qucik buttons launch the program and features in the control panel and restart you Notebook and check if new drivers are installing and the buttons work correctly.

  If the problem exists then connect to www.Hp.com and click on support and drivers and enter the product number and click search and then select software and drivers down load and select your operating system and then click driver - keyboard, mouse and input (6) devices , and then click the HP Quick Launch Buttons ►2010 / 04 / 09, Version: 6.50.16.1, 26.05 M and click donwload and install on nb and check if the problem is resolved, and if the problem exists , and then click Start > Search > the Device Manager and in Device Manager > mice and other pointing device and uninstall the Synaptics ps2 device and restart laptop and check if the buttons work properly, if the problem exists and then contact the Hp Support to set up the bench event for laptop

  Please select the button "Accept as Solution" on the post that answers your question better. In addition, you can select the 'Congratulations' button on any post helpful to give this person a quick thank you.

• The mouse no longer works

  My mouse no longer works, connected a new one and still nothing... looks like it's ok in the two control panel and Device Manager. Help!

  Hello

  1. What is the brand and model of the mouse?
  2 are you able to use the same mouse on another computer?

  Please answer these questions and tell us more about the issue.

  Try the fix tool running of the article below and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  May you enjoy a look at the article below.

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

• finger faucet two click right no longer works

  The last few days, I noticed that the tap of the two finger right click not no longer works.

  I am running windows 8 on my x220t and it still worked. Now, he suddenly stopped. I have already installed the new driver from the website of synaptic, but no difference.

  It is enabled in the mouse control panel. Also, when I reboot it works, but only for a few times. We stop. Looks like windows is disabeling it?

  Any toughts?

  There is a difficulty of recording in this thread. Give it a go and see if it works for you. It did for me.

  http://forums.Lenovo.com/T5/IdeaPad-IdeaTab-Slate-tablets/two-finger-tap-right-click-not-working/m-p...

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse. This mouse works on another pc... I am getting error usb? I removed & charged all under the usb tab__

  My mouse no longer works 2 days ago... I restored my pc on the eve, it works... but that did not help my mouse.   This mouse works on another pc... I am getting error usb?  I removed & charged all the usb tab

  Hello

  You may need assistance from a real store tech computer (no leeks and glances at a BestBuy or)
  other BigBox stores) or the manufacturer of your system Support.

  What is the error of USB?

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Please make these now even though you might have tried this before:

  Remove the mouse if indicated in the Manager of devices - devices of score - click right on - UNINSTALL.

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.