dependency service or group failed to start on windows 7

Similar Questions

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• in windows 7 networking shares there is a mistake, that the dependency service or group failed to start... help me to solvwe this problem

  in windows 7 in sharing network, sometimes an error "the dependency service or group could start.

  Help me solve this problem...

  Hi Nick,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems like you get an error "the dependency service or group could start" while turning on the network share. I will certainly help you fix this problem.

  (1) did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps to enable services and check if it helps.

  (a) click Start and type services.msc , and then press enter.

  Make sure that all the following services are enabled. Don't forget that its Startup Type is set to Automatic , and then click OK.

  To activate a service, click to select the check box.

  . Application Layer Gateway Service

  . Network connections

  . Knowledge of the network (NLA) locations

  . Plug-and-Play

  . Remote Access Auto Connection Manager

  . Remote Access Connection Manager

  . Remote procedure call (RPC)

  . Telephony

  (b) click OK, and then click restart.

  Method 2: If the problem persists, I suggest you to follow the steps from the link and check if it helps.

  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about Windows. We will be happy to help you.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Unable to start Windows Media pPlayer 11 to share media: Error 1068 dependency service or group could not start

  1068

  Cannot start media player 11 to share media. Error 1068: the dependency service or group could not start

  Hello! I found the solution to my problem here:

  http://wiki.answers.com/Q/Why_do_I_get_an_Error_1068_when_I_try_to_share_my_media_in_WMP11_in_WXP_pro_sp2_start_service_in_services

  It is possible that it would be more useful for someone.

• Connection status: unknown, the dependency service or group could not start

  When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}

  Component file: [C:\Windows\system32\connect.dll]

  Error: (0x8007277B)

  Additional information:

  Could not detect Internet connectivity
  If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
  I would be grateful if someone could suggest the solution other than restart the system...
  I use windows vista as operating system...

  Hi Gattu,

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  See the article and check if that helps:

  Network connection problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

  Method 4:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  If you are still experiencing a problem, please reply and we will be happy to help you.

• State of the unknown connection, dependency service or group do not start.

  Original title: unable to connect to the internet.

  I can't connect to the internet. He said unknown state with a Red Cross of the connection and the dependency service or group does not start. My diagnostic policy Service stopped and can not turn on the firewall

  Hello

  -What security software is installed on your computer?

  I suggest you perform the methods mentioned below.

  Method 1: Security Microsoft scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 2: Enable disabled services and start the services.

  To enable the disabled services and start the services:

  a. click Start, type services.msc in the box start the search.

  b. Select Services in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. right click on phone and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the Service status and then click OK.

  f. Repeat steps 3 to 5 for service remote access connection manager and Remote Access Auto Connection Manager service.

  Method 3: Remove unwanted entries from EAP (Extensible Authentication Protocol) of the register.

  ESTABLISHMENT OF THE REGISTRY:

  Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  a. click Start, type regedit in the box start the search.

  b. Select regedit list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. navigate to the location HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan\PPP\EAP

  d. identify the subkey used by your modem.

  e. remove the other subkeys other than the default (13, 25 and 26 are by default).

  Method 4: If the methods above does not help then I suggest you perform the restoration of the system to the point when the service worked very well.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is helpful

• Unable to backup get error 1608 the dependency service or group could not start

  Original title: unable to backup

  1608 the dependency service or group could not start. Task Scheduler does not

  Hi LesComan,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: I also suggest you temporarily disable the software antivirus (and any other security software) and firewall on the computer and see if that fixes the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

   

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps.

• What is the code for error "the dependency service or group could not start": 1068

  What is "the dependency service or group could start"?

  This seems to be a HUGE problem for PC users so much; It gives rise to the error 1068 code and effects so many aspects of our machines...

  What is this area of computing? What it means? If we understood this, solutions might be easier to find?
  From what I can deduce (I could be wrong) there seems to be a communication error; But why did affect many different areas of the machine?
  I recently corrected an error 1068 on an internet connection and then again on spooler print issue; Now, I'm trying to solve the error even on a sound broadcast. Frustrated? Isn't the half of it! WHAT IS THIS ERROR?

  the dependency service or group could not start
  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/563b908c-AA24-4000-9b2d-b6ff02f10c56

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• the dependency service or group failed meassage after chkdsk

  My phone ran chkdsk at startup, and since I get the message "the dependency service or group could not start" when you try to load programs. On the services page, the majority is disabled what do I do?

  Hi CharlotteF89,

  1. the problem occurs with all programs on the computer?

  2. do you have security software installed on the computer?

  3 do you have changes on the computer before the computer ran the Chkdsk scan?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• "The dependency service or group could not start" error

  SERVICE OF DEPENDENCE OR GROUP FAILED TO START

  My computer is really in trouble, because he always tells me that "the dependency service or group could start. I use a vista and cannot connect to the internet more. What can I do?

  Hi DR PEPEREMPE

  
  Do you get the error message when you try to connect to the internet?

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Network is inactive: the dependency service or group could not start

  After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

  The dependency service or group was able to start.

  When you check the services, I found the following services should be started automatically but currently has started:

  DHCP client
  Network list service
  Network location awareness service
  NTRU TSS v1.2.1.27 tcs

  When you try to start one of them, get the error that the dependency service is not provided on except this one:

  Network location awareness, trying, start getting the following error: Windows cannt start local service...

  I checked the event log and found a number of errors like:

  -----------------
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  -----------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  --------------------------

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:

  Data collection of Writer

  Context:

  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

  Author name: System Writer

  Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

  -----------------------

  Network list Service service depends on the network location awareness service which failed to start because of the following error:

  The service has returned a service-specific error code.

  --------------------------

  NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

  The service has not been started.

  -----------------------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  And this last error repeats several times...

  Please help solve this problem as soon as you can, its really serios error.

  Awahaba

  This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

  You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.