the dependency service or group failed meassage after chkdsk

Similar Questions

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• in windows 7 networking shares there is a mistake, that the dependency service or group failed to start... help me to solvwe this problem

  in windows 7 in sharing network, sometimes an error "the dependency service or group could start.

  Help me solve this problem...

  Hi Nick,

  Welcome to the Microsoft Community Forums.

  According to the description, it seems like you get an error "the dependency service or group could start" while turning on the network share. I will certainly help you fix this problem.

  (1) did you do changes on the computer before this problem?

  Method 1: I suggest you follow the steps to enable services and check if it helps.

  (a) click Start and type services.msc , and then press enter.

  Make sure that all the following services are enabled. Don't forget that its Startup Type is set to Automatic , and then click OK.

  To activate a service, click to select the check box.

  . Application Layer Gateway Service

  . Network connections

  . Knowledge of the network (NLA) locations

  . Plug-and-Play

  . Remote Access Auto Connection Manager

  . Remote Access Connection Manager

  . Remote procedure call (RPC)

  . Telephony

  (b) click OK, and then click restart.

  Method 2: If the problem persists, I suggest you to follow the steps from the link and check if it helps.

  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I hope this helps. Try the above steps and get back to us for further assistance if you have questions about Windows. We will be happy to help you.

• Error 1068: The dependency service or group could start.

  When you try to start a few automatic services (who of course has not started automatically) I get this error. Check the list of dependencies for each service they all list the HTTP Service. I have run this command: beginning of config sc = HTTP request and get a message that it succeeded, and restart the computer. No change. I run and do not restart the computer - no change. I ran sfc/scannow just in case he might find something but nothing. I even reinstalled the upgrade of Windows 8 thinking it could replace all of the corrupt files. No change. I wonder if it can also be the source of some other problems I'm having. With a certain Windows update for example.

  Any help would be greatly appreciated.

  After you determine that the 'http' service was one of the dependencies for the print spooler start, and after finding that there is no such service listed, I came across this answer, which will allow you to CHANGE the dependencies. Basically, I deleted 'http service'. Click on the link below and scroll down to "method 3".

  http://www.techsupportall.com/solved-print-spooler-error-1068-the-dependency-service-or-group-failed-to-start/

  Obviously this response of mine is almost three years after the original question posted, but maybe it will help someone else in the future.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• "The dependency service or group could not start" error

  SERVICE OF DEPENDENCE OR GROUP FAILED TO START

  My computer is really in trouble, because he always tells me that "the dependency service or group could start. I use a vista and cannot connect to the internet more. What can I do?

  Hi DR PEPEREMPE

  
  Do you get the error message when you try to connect to the internet?

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Network is inactive: the dependency service or group could not start

  After you install windows vista sp1 on my new computer dell laptop, network lan connection is not active and when the mouse via the network sign in the notification area in the taskbar, the following error message appears:

  The dependency service or group was able to start.

  When you check the services, I found the following services should be started automatically but currently has started:

  DHCP client
  Network list service
  Network location awareness service
  NTRU TSS v1.2.1.27 tcs

  When you try to start one of them, get the error that the dependency service is not provided on except this one:

  Network location awareness, trying, start getting the following error: Windows cannt start local service...

  I checked the event log and found a number of errors like:

  -----------------
  Failed to initialize the Security Kerberos for authentication package on the server side. The data field contains the error number.

  -----------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  --------------------------

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005. This is often caused by incorrect security settings in the process of the writer or the applicant.

  Operation:

  Data collection of Writer

  Context:

  Writer class ID: {e8132975-6f93-4464-a53e-1050253ae220}

  Author name: System Writer

  Writer Instance ID: {855aa7e1-4b71-4448-bae8-84e347d26b85}

  -----------------------

  Network list Service service depends on the network location awareness service which failed to start because of the following error:

  The service has returned a service-specific error code.

  --------------------------

  NTRU TSS v1.2.1.27 TCS depends on the TPM Base Services service which failed to start because of the following error:

  The service has not been started.

  -----------------------------

  The network location awareness service stopped with the special service 3221226008 (0xC0000218) error.

  And this last error repeats several times...

  Please help solve this problem as soon as you can, its really serios error.

  Awahaba

  This article explains how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista. It describes how to use the System File Checker tool to analyze and replace system files in scenarios where you are troubleshooting a problem in Windows Vista: http://support.microsoft.com/kb/936212/

  You might analyze you the computer to check for malicious software that could of damaged service this type are suggested anti-malware analysis: http://social.answers.microsoft.com/Forums/en-US/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  Please let us know Justin M. Microsoft Support Engineer Answers visit our Microsoft answers feedback Forumand let us know what you think.

• Connection status: unknown, the dependency service or group could be started. __Windows could not start the DHCP Client service on Local computer. Error 5:Access is denied.

  Good evening!

  About 2 days ago my laptop not able to connect to the internet with wireless on, a brand of red x on the computer icon in the bottom right. When I hover the mouse over this icon, it shows ' connection status: unknown, the dependency service or group could be started. " I check services and found DHCP stopped running, I tried to start it manually, it shows "Windows didn't start the DHCP Client service on Local computer." Error 5:Access is denied. "I did ' sfc/scannow' and found no errors.
  I use a laptop from my friend and it works great! So there is nothing wrong with the router but my own laptop. My laptop runs windows Vista editions Home Premium with Service Pack 2.

  Need help! Please, need to connect to the internet to go to school online. Thanks in advance for any help!

  Very respectfully,.
  Jay2010

  Hello
  Failed to start the Service on the local computer's DHCP Client (applies as well to Vista)
  http://WindowsXP.MVPs.org/DHCP.htm

  ----------------------------------------

  Start - type in the search box-> find CMD top - right on - click RUN AS ADMIN

  You can copy and paste this command, and then press enter

  netsh winsock reset catalog

  ======================

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ----------------------------------------

  Try setting all Windows services on their default values.

  Start - type in the search box-> find Services at top - right click - RUN AS ADMIN

  Vista default services
  http://www.blackviper.com/WinVista/servicecfg.htm

  ---------------------------------------

  Actually try updating your driver: (use a wire or download on another computer and transfer via)
  removable media)

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------

  You can get more help in these forums.
  http://social.technet.Microsoft.com/forums/en/category/windowsvistaitpro

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• install problem - c:\users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe the dependency service or group was able to start

  I use Win 8. I recently uninstalled Firefox on C: and am looking to reinstall on F:

  I downloaded the installation package full https://www.mozilla.org/en-US/firefox/new/?utm_source=firefox-com & utm_medium = referral, but when I ran the installation package, I got a popup window after the extracted package:

  c:\Users\ < NAME > \appdata\local\temp\7zS171C.tmp\setup.exe
  The dependency service or group could not start

  Any ideas?

  You may need to temporarily disable your security software (antivirus).

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Connection status: unknown, the dependency service or group could not start

  When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}

  Component file: [C:\Windows\system32\connect.dll]

  Error: (0x8007277B)

  Additional information:

  Could not detect Internet connectivity
  If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
  I would be grateful if someone could suggest the solution other than restart the system...
  I use windows vista as operating system...

  Hi Gattu,

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  See the article and check if that helps:

  Network connection problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

  Method 4:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  If you are still experiencing a problem, please reply and we will be happy to help you.

• The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start.

  the dependency of the orgroup faaied to start service unknown Internet connection.

  The same day as my expired Norton my internet connection icon says... unknown internet connection. The dependency service or group was able to start. I tried all the suggestions on this page. Can't even find the virus that the internet not connected. My livebox is grateful for the laptop please help

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Is the question only for the icon network did you try to open a Web page and check?

  ·         What suggestions do you have tried?

  ·         What is the exact error message?

  ·         Have you tried all the steps from the link?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/connection-status-unknown-the-dependency-service/92203623-b6d5-4301-8c79-00210abbcdd4

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/943996

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2:

  If the previous step fails, follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/936211

  Method 3:

  If the previous step fails, reset WinSock and check if the problem persists:

  http://support.Microsoft.com/kb/811259

  Registry warning:

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the link below to follow the steps to back up registry:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 4:

  Temporarily disable the norton software (and any other security software) and the firewall on the computer as a test and check if this solves the problem follow the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program.

  Note: make sure that you enable the antivirus software, other security and firewall programs.

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• The dependency service or group could not start

  I have accidentally infected myself with a friends virus. I've deleted successfully, and virus damage was left. The biggest damage that they let me Internet, error, it says. "The dependency service or group could start" and I have internet on all my other computers, but it is said that to my laptop. Could someone help? (YES, I DELETED THE VIRUS)

  Hello

  ·         When exactly do you get this error message?

  ·         You get this error message when connect you to the internet?

  ·         What internet browser do you use? (Specify the browser: Internet Explorer, Firefox, etc.)

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary.

  Follow the steps below to perform a Scan of the SFC.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  
  b. type the following command and press ENTER:

  sfc/scannow

  
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.

  
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.

  
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".

  
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest talk you the following Microsoft KB articles and check if it helps.

  Some services do not start in Windows Vista

  http://support.Microsoft.com/kb/943996

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner