Deployment cannot load a module of code (error)
I do the deployment in a packed library project
If you take a look at the image of the file is "Seq Analyzer result from my deployment machine where I don't have Labview Development, runtime only.
If I analyze the deployment sequence (Image) file in my computer development, everything is OK
Even during construction, it shows no problem.
How to type this question in advance
File missing 'msvcr100d.dll' added to C:\Windows\System32
Problem solved
Tags: NI Software
Similar Questions
-
Original title: ISATAP adapt #2 does not properly. How can I solve this problem?
My Norton 360 diagnostic report detected a hardware device unusable. The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.
I think that it is also affecting my internet connection and disrupt its speed.
Can you please help with this question?
Thank you very much
TonyHi Tony,.
You can try reinstalling the device driver and check if it works.
Uninstall and reinstall the device in Device Manager.
a. Click Start, type devmgmt.msc and press to enter.
b. Locate the Microsoft ISATAP Adapter device
c. right-click on the device and select uninstall
d. restart the computer and check.You can also consult the following article:
On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/default.aspx/KB/932520Hope this information is useful.
-
Hello
My custom application ofa was working fine but suddenly he stops and the message below.
oracle.apps.fnd.framework.OAException: cannot load application module
Load class: oracle.jbo.common.java2.JDK2ClassLoader
Charger: oacore.root:0.0.0
Source code: / dev/u00/r12/apps/apps_st/comn/java/classes /.
Configuration: < library > in/dev/u00/r12/apps/apps_st/comn/webapps/oacore /.
at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2002)
at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:2793)
at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:453)
at oracle.jbo.http.HttpSessionCookieImpl.useApplicationModule (HttpSessionCookieImpl.java
Don't know what is causing the problem. all the tips are greatly appreciated.
Thank you
KK
Is - the current running in the server or Jdeveloper?
If it is the server, you did all the changes recently? Did transfer a file? If so, you correctly transfer in binary mode?
Delete the class files, copy the files again (binary mode if you transfer files class if the java files, transfer in ascii mode and then compile it in the server).
Bounce the server and see what happens.
Let us know how it goes.
See you soon
AJ
PS: Please mark the answers useful/correct if it is
-
Cannot install Windows Vista (KB968930) code Error 80070020
ORIGINAL TITLE: install
Cannot install Windows Vista (KB968930) code Error 80070020 continue to flock to the top what should I do?
Refer to:
UTC/GMT is 00:12 Sunday, July 8, 2012
-
Windows cannot load driver DVD - RW - Code 39
Accidentally, I messed up my cd-rom drive. Just recently, I bought a toshiba as100-s40dt and when I tried to play a dvd, it says that the DVD cannot be read because the region is not supported by the drive of cd-rom. I realized I can do only 4 changes so I thought maybe I could just download a software that can help me play the DVD without change the region settings in my laptop. I downloaded a software named DVD UnlockerDriver64 and as I restarted my laptop, I can't find my dvd drive in Explorer as well.
It all started with the code 52 so we are trying to update the driver, it changed to code 39.
Windows cannot load the driver for this hardware device. The driver may be damaged or
Sing (code 39).
(Could not load the device driver)
HS device driver could not be loaded.
Error status is 0 x %x
I checked my driver and it says that I still have the best driver installed in my system.
Help, please.
Hello
BTW, you should check with the support of this DVD Unlocker program since it is the
cause of your disorder.Don't forget to check with the support of Toshia because OEM, they are responsible for the good
operating Windows and hardware.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Hello
I recently build the PAGE, AM, VO, EO, CO and deployed the entire myclasses Custom folder to the $JAVA_TOP.
-FTPed in binary Mode class files
-the Custom Page imported from the MDS using XMLIMPORTER
-Changed to 755 and bounce Server
All of these work in developer J, even I recompiled and redeployed several times and bounced the server each time. I always get the error below
Problem: When I try to access the Page It gives me error like below
oracle.apps.fnd.framework.OAException: could not load application module 'xxx.oracle.apps.fun.transaction.entry.server.XXXFunDffAM '.
# # 0 in detail
Houston-30003: AppPool (gaalpltora011f.linux.us.ams1907.comT4401611xxx.oracle.apps.fun.transaction.entry.server.XXXFunDffAM) failed at the checkout a module of application because of the following exception:
oracle.jbo.JboException: Houston-29000: Unexpected exception caught: oracle.jbo.JboException, msg = Houston-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg = Houston-25002: type xxx.oracle.apps.fun.transaction.entry.server.XXXFunDffAM ApplicationModule definition not found
Enjoy your entries on this
Thank you
SAI
Excellent. I'm glad it helped.
Can you please mark it as answered!
Thank you
Sandeep
-
23 - g010 HP Pavilion all-in-One: Minecraft cannot load due to a graphic error?
Hello, I was alerted by my son as his Minecraft won't load, he said it was because of the Pixels is not accelerated, and after a lot of research to try to resolve this error, nothing happened. I tried to download the latest version of the AMD driver, as suggested by the Minecraft IRC.
I need help to solve this problem.
Any help would be appreciated.
Please read the messages from redscarlett to see how it solves the problem that you are experiencing. I hope this helps you.
-
Cannot install service pack 1, code ERROR 80073712
I ran MS all the tools online to FIX IT, it dose have something to with the restore point?
Hello
1. what Microsoft Fixit you talking?
2. don't you make changes to the computer before the show?
Please follow the steps below.
Method 1:
Run the Microsoft fixit from the link below.
http://support.Microsoft.com/mats/windows_update/
Method 2:
Step 1:
Put the computer to boot.
Click on the link below
http://support.Microsoft.com/kb/929135
NOTE: after you perform the troubleshooting steps, return to the computer to start as usual (see step 7 from the link below)
Step 2:
Manually, try to install updates from Microsoft Download Center.
a. visit the Microsoft Download Web site, type the number of "KB" of the update in the search box and press ENTER.
b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.
c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.
d. When you are prompted, click open to install the update.
Microsoft Download Center
http://www.Microsoft.com/en-us/download/default.aspx
Method 3:
Follow the steps from the link below.
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80073712
-
When I install Flash Professional CC 2014, I get the error:
Exit code: 16 Please see specific errors below for troubleshooting.
For example, ERROR: DW039...
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 1 Error (s)
ERROR: DW039: cannot load deployment file
-------------------------------------------------------------------------------------
I found the solution: please launch customer 'Creative cloud'-> preferences-> selection of the English language (International)-> restart the creative Cloud client and reinstall Flash CC 2014. It works for me. Before that, my language setting is Chinese.
It is a bug, please fix as soon as POSSIBLE.
-
My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »
Is anyone know how can I access my hard drive again?
Thank you
Hello
You has made changes to the system before the error appearing? Cancel the changes.
(1) in Device Manager > right click on the driver, and then select uninstall
Reboot and Windows will reload the driver
(2) remove the upper & lower filters that cause errors in Code 31
http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm
Access the manufacturer's Web site and search for updated driver
-
Original title - USB - IF xHCI USB Host Controller
This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I have a permanent error on my computer and when I run the troubleshooter I get the above message. It says Windows cannot load the driver.
Hello
USB devices remove all you can - restart the computer - is still there, the error? If it isn't
It is related to one of the add-in devices that you removed. If she is still there, then, the question is
either a device internal who can not remove or physically with the USB bus itself.
If it was not there, add devices at a time until it is displayed - keep in mind that it is
possible that there are two (or more) devices in conflict over the issue. Once you
identified the check of the aircraft with the help of the manufacturer.1. to find the control panel - device - device - right-click on it - uninstall - Manager then
Restart the computer to see if it clears.2. same place - double click on the device - driver tab - driver update - to see if that helps.
3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
online documentation and drivers, diagnostics and ask questions in their forums on all known
questions. Update the Bios and chipset or other USB drivers.=====================================
If necessary, we will use these additional troubleshooting methods:
How to fix Code 31 errors
http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: Add/Remove components error and DVD driver error
Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.
Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.
I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.
HelloCode 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123Method 1.
Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/GP/cd_dvd_drive_problemsMethod 2.
Also, try the methods listed in the section below and check.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116I hope this helps.Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
(KEYBOARD ERROR)
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Hello
I don't know how it happened.
I tried unistalling the software but have the same problem when connected to e
Help, please
Hi Davedirect,
· It's a wired keyboard or a wireless keyboard?
· Who is the manufacturer of keyboard?
· Since when are you facing this problem?
· You did changes to the computer before this problem started?
· Have you tried to restart the computer and check if the keyboard works normally?
However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below. More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.
Step 1
Remove the drivers from the computer. To remove the drivers to follow the steps below:
a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".
b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.
Step 2
During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:
a. Click Start.
b. access control panel > system > hardware > Device Manager.
c. open Device Manager and expand the keyboard device.
d. right-click on the device keyboard and uninstall the device.
During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.
Step 3
Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
Access the link below to learn more about the error code 38:
http://support.Microsoft.com/kb/310123
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: WAN miniport driver
A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
I use windows 8 in my sony vaioMODEL - SVE15123CNWHi Praveen,
Perform the steps suggested by Nirmal S from the link below and see if it helps.
Answer please if you have any questions.
-
Original title: Audio recording sound recording microphone
Hey, if I get this message:
Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
{Unable to load device driver}
HS device driver could not be loaded.
Error status is 0 x %xWhen I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff
There are several models of m6 ENVYENVY m6 -?
This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)This is a link to the HP support site to download driversAnd this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problemsLooks like something to remove the registry entries for the driver
Maybe you are looking for
-
secure, Web site log auto password when the password turn off
When I go on a website that is secure such as Amazon, Paypal and others. When I click on connect my password is automatically filled in. I don't want, I enter the password I. Firefox options: history and cookies are all cleared, don't forget no passw
-
OSX Mavericks (10.9.5) Security Update 2016-003 breaks http
17 "macbook pro woman ceased to be able to use non-secured web connections after the update of 2016-003 - only the default URL for https seem to work at all. Even the App Store does not work correctly. How can I save it?
-
using HP PAVILLIION g7 2010nr need help understanding keyboard like the keys are not 1-12 How can I make them work the way I want example - f11 is usually to help get into the safe mode TU where is f11 here? Thank you for the help
-
Only get a black screen on startup of Windows
I have the most recent 5K 27 "iMac with a Radeon R9 M380. I want to install Windows 10 with an ISO and the process seemed all fine, even managed to get to the point connect you with my Microsoft account. But then after that I got a black screen. Off
-
HP Envy M6-1151sa: 10 Windows upgraded and lost HP support.
So I've recently upgraded to Windows 10 and installed a clean place. Afterewards I can't find HP support or feel Cool and the Beats Audio provided with my laptop original device. Is it possible to get these back?