Derived from usage to control signal

Similar Questions

• Derives from NI USB 6363 signals (differential Setup)

  Hello!

  I just changed a task of data acquisition of 2 signals of "CSR" to "differential". After that, the signals set to reflect really bad. Did this happen because I have not yet hooked the acquisition of data the source of real tension? This loop is also simultaneously by sending output signals for data acquisition products. I'm just tests prior to the configuration.

  Thank you in advance.

  Yes.

  If you want you can connect the + 5v from the card to the channels if you want a real signal.  But with nothing hanging tension can walk around.

• HP3070 b611all in a printer: HP3070 unable to scan from the printer control panel

  Hello

  Although I can scan a document from my laptop I can't do it from the printer control panel.

  I tried following the instructions in the Support Center
  "HP Deskjet 3070 e - all-in - One Printer Series - how Scan: from the control panel" but I didn't know where I could: ' activate the scan to the computer connection (Windows only).

  Anywhere there is no mention of "Scan" under settings B3070 only in a separate file, HP Scan on my system...

  Thanks for your help so far.  I now have much more HP files/programs that I started with.  What can delete and to be able to continue to print wireless & scan of the computer, or maybe I should ask what files do I need and I can uninstall.

  I ordered the following cable to establish a connection between my laptop and a printer?  I hope it is the right one.

  USB printer cable lead for HP Hewlett Packard and Lexmark A - B

• How to create the ampere control signal (4-20 my) of the voltage control signal (- 10 - 10 V)

  I must control 4 proportional valves (Bürkert 2873 x 3 & 2875 x 1) installed on a gas pipeline. These type of valve control signal is 4-20 my. I have a data acquisition NI USB - 6343 with 4 AOs of V-10-10 X. How can I control these valves with the DAQ hardware? I am not familiar with ELECTRIC/ELECTRONIC, that is why I ask. Thanks in advance.

  This device can produce only 5mA on the analog output.  So, you will need an op amp that can display on your 20mA.  See here for the creation of a converter with an op-amp circuit.  Your USB-6343 should provide 1 to 5V to the op-amp.

• 12.2.4 creating a requisition internal error (error of calculation of the tax: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction).

  Hi all

  I have created a new configuration of client and location. Now try to create IR and get below error.

  ----------------

  Error: The tax calculation: the system cannot determine the geographic information for this place and cannot be derived from a tax jurisdiction. Please contact your system administrator.

  --------------------

  I've made a few changes by looking at Doc-ID 1385936.1 and community discussions.

  Ran "Name geography program SEO" and the journal looks very good. No registration rejected.

  +---------------------------------------------------------------------------+

  From simultaneous program ' geo referencing worker name: 1'

  Start 08/07/15 07:44:56

  Treatment for the Table: HZ_LOCATIONS and run Type: ALL

  Parameters: Country Code: U.S.

  Use code: all THE

  Location Id: NULL: location Id: null

  Start date: NULL: End Date: NULL

  Number of workers: 1

  Total number of records of location of treaties: 7319

  Number of records managed: 7319

  Number of rejected records: 0

  Name of georeferencing process completed successfully

  +---------------------------------------------------------------------------+

  But still, I get the same error during the creation of IR

  Someone help me please by looking in the uploaded screenshots. Incase if any additional necessary information, pls let me know.

  This is related planning tests for this customer, I don't know about this part of the tax.

  Any help is really appreciated. Thanks in advance.

  Akshay

  PS: This is not the sensitive customer data.

  Hello Akshay,

  Can you please follow the note Transaction Workbench error: System cannot determine your location for information
  This location and cannot derive from a tax jurisdiction (Doc ID 438718.1) and see if that helps

• Derives from detected time 11 GR 2

  Hello

  We have recently set up data guard 11 oracle GR 2 in Windows server x 64 bit alertlog .but see below the time drift detected. how do I solve this problem

  Home of ADR = E:\app\Administrator\diag\rdbms\n4bill\n4bill:

  *************************************************************************

  The results to the output file: C:\Users\ADMINI~1\AppData\Local\Temp\alert_2400_2640

  _n4bill_1.ADO

  adrci > Show map - tail f

  06:37:50.388000 2014-03-02-08:00

  LNS: Standby redo log file selected for thread 1 sequence for destination LOG_ 14

  ARCHIVE_DEST_2

  09:00:10.966000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  10:26:26.996000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  11:47:29.990000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  12:58:28.968000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  14:00:24.334000 2014-03-02-08:00

  Thread 1 Advanced to record the sequence 15 (switch LGWR)

  Currently Journal # 3 seq # 15 mem # 0: +DATA/n4bill/onlinelog/group_3.258.841117763

  LNS: Standby redo log file selected for thread 1 sequence for destination LOG_ 15

  ARCHIVE_DEST_2

  Archived journal 24 additional for each sequence 1 14 0x70ec6d3e dest ID thread entry 1:

  14:21:19.971000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  15:42:37.976000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  17:16:36.970000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  18:39:12.955000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  20:02:36.921000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  21:25:03.960000 2014-03-02-08:00

  Derives from detected time. Check the file path VKTM for more details.

  21:29:21.134000 2014-03-02-08:00

  Thread 1 Advanced to record the sequence 16 (switch LGWR)

  Currently journal # 1, seq # 16 mem # 0: +DATA/n4bill/onlinelog/group_1.261.841117763

  LNS: Standby redo log file selected for thread 1 sequence for destination LOG_ 16

  ARCHIVE_DEST_2

  Thank you

  Finally, I apply patch 14223718 now the problem has been resolved

  Thanks for sharing all the knowledge

• Why can't create shades of color from scratch (not derived from photo)?

  Hey Adobe-ers,

  I am a long-time Adobe product user, and I used the tools of color from Kuler. It is disconcerting that the mobile versions of this tool (CC color then its subsequent integration with catch CC) do not seem to give you the means to create shades of color from scratch - instead requiring an input image and picking color points.

  It seems obvious that finding inspiring colour combinations of your external environment (and take a picture of them) and derived from the color combination of your imagination, is completely different creative workflow that can the two place to the creation of assets of color. Only the former mode (probably more complex) is supported seems quite bizarre!

  I appreciate really new workflows that adobe have aroused, especially on the use of cloud storage to make simple goods to share between machines - but I'd love to have a place to create shades from scratch (in the way of the CC of color web - app) without the workaround of blocking pipeline creative to have to take a picture at random and then change the colors derived from distraction to possibly meet what I had imagined.

  PS Apologies in advance integrated;  There is a way to do and there is just something missing me, this has been answered, or if this is not the right place for feature requests etc.

  Hello Stephen,

  Thanks for that. No, you do not miss anything. This feature is only in the web version of the application. From time to time, we receive requests, to incorporate it into the app now in the mobile version, you need to capture a theme. Then change it.

  I'll leave a note for the team with your comments.

  And, just to alleviate any concerns... the right place for your comments is everywhere where it is easier for you to leave. Finally, we see (and try to respond to) everything.

  Thanks again.

  Sue.

• 'CREATE JAVA' error: ORA-29506: derived from the USING clause invalid query

  Hello
  
  I created a table with the following attributes:
  
  name varchar2 (200);
  LOB_DATA blob
  
  
  I loaded a java source file in the lob_data blob.
  
  I then called the SQL:
  
  create or replace and compile the java source named "RemoteCommand" using blob
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  and I get the error:
  
  ORA-29506: invalid query from the USING clause
  ORA-00936: lack of expression
  29506 00000 - "query invalid derived from USING clause.
  * Cause: The USING clause does not form a valid query.
  * Action: Correct the USING clause.
  
  
  
  If I simply copy and paste the query part of the USING clause:
  
  Select lob_data from str_blob_table where name = 'RemoteCommand.java ';
  
  I get a valid result in SQLDeveloper.
  
  
  Any thoughts on what is happening here?
  
  A few notes:
  1. it is a 8i database.
  2. it works very well on a 9i database, but according to the SQL reference for 8i, it should work as well.
  
  Thank you
  Brent

  Try to delete "select" in the USING clause, that is to say change the SELECT BLOB SUPPORT... for BLOB to HELP... The original form of the syntax of JAVA to CREATE did not expect the SELECT token must be explicitly provided. Somewhere between 8i and 9i the parser was changed to try the provided text as well as what, with SELECT prefixed. So a CREATE JAVA statement you tried working in 9i but in 8i fails because SELECT would always be added before you try using the clause as a query, resulting a SELECT duplicate token.

• Toshiba 42Z3030D TV not receive signals from the remote control

  I can't use any (Toshiba or the distance from Sky TV) remote on my TV.

  Everything works on the TV when I use the buttons on the side of the TV but the TV does not seem to receive all signals from remote control.

  I changed the batteries in the remotes, and it still does not work.

  Can anyone help please?

  Model: Toshiba 42Z3030D TV

  T couldn't be possible that your TV remote is malfunctioning?
  Maybe you need to replace.

• PtByPt derived from an analog signal

  Hello

  I use to collect crio and NI 9215 analog data. How can I use derivatives x (t) PtByP.vi to calculate the derivative of the signal acquired in a loop that reads the samples?

  You can manually calculate the derivative using a few ex.

  Concerns, a derivative consists of delta-y is divided by delta-x.

  So you could just do something like this:

  

  Assuming that you have a table 2D data, with the first column as X values and the second column as values of Y.

  You can find the instantaneous drift for each point.

  Edit: This image came out weird. These two orange wires that seem to go to the right of the loop for, but does not connect what either, they are supposed to feed their respective shift registers.

• How do I create a traction voltage as a control signal upward?

  I use a minimum/maximum statistics module, but is unable to route the analog data to all 16 entries that I need this module (I suppose a limitation of current car, but I don't know why this would be necessary in the software). My first thought was to use a Signal Amplitude controlled router to expand this case 15th signal at 16. It seems that, since I want the router to Signal to be always active (ON) that I don't want to pull up to command input the Signal from the router. How to create a pull upward which is common in digital electronics for this?

  It is not a limitation of current car, but simply that you can plug a wire 15 times, for up to 16 destinations. You can work around this by inserting a module of scaling, the NOP value, then its output for up to 16 more destinations.

• effects of sampling frequency on the convolution of waveforms (need feedback from a GURU of signal processing)

  I have included my code as version 8.5 for those who have not yet upgraded to 8.6.  I have also included some screenshots so that you can replicate the results I got.  I hope that some signal processing guru can shed light on what I mention it further.

  This VI convolves the signal of impulse response of a simulated servomotor which is essentially a damped sine the input pulse which is a step function.  The signal resulting convolved should be IDENTICAL to that of the step response of the engine which is RED on the display 1.  As you can see the convolution that results in table 2 shows the same structure of frequency, but its magnitude is INCORRECT.  As you can see in the catches of 2 screen sizes differ by a factor of 2 & done the sampling frequency of the wave.  Why the sampling frequency, impact on the scale is also very strange & disturbing.

  Would appreciate any corrections & explanations so that I trust the convolution of the other wave forms of entry than just the step function.

  OK, I think I have it working now.  Your premise on the effect of sampling on the derivative is not the issue.  Does it affect what the FREQ of levy is the basis of time of convolution.  As the convolution product is not continuous but discrete the length of the array should be taken into account & the sampling frequency must be consistent with this length of array as well as 1 second corresponds to 1 second.  If sampling freq is 2 kHz & the length of the array is 1000 then to get the correct time base by a factor of 2 must be taken into account.  In addition, to take account of the DC, shift of the ZERO gain factor must be added to the convolved signal to get the correct size.

  Thanks for making me think more deeply.

• How to uninstall a program that is not in the category 'Programs' from the Panel control?

  The program I'm trying to uninstall is a game called 'Purble Place' and it was already installed in my computer. I want to uninstall it because it seems to me a bit too childish and not very interesting. I tried to find it in the control panel in the category 'Programs', but it was not and I could not find a solution in the internet, even not in the "help and Support Program". Does anyone know how to uninstall the game (and maybe installed programs that are not listed in "Uninstall programs")?

  Hello, James R, P

  It would be prudent to remove entries from the registry and the values for Purble Place. It doesn't hurt also to them to leave because they don't refer to any program since you already have you have already uninstalled the software.

  I hope this helps answer your question.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Class derived from LabelField with custom font color, but when focus not only

  Hello

  I have some problems with the LabelField-derived class. I want it has customized color background and police, but only when it does not have focus.

  I tried to do the following:

  protected void paint(Graphics g) {
      if (isFocus()) {
          super.paint(g);
      }
      else {
          final int bgColor = g.getBackgroundColor();
          final int fgColor = g.getColor();
  
          g.setBackgroundColor(backgroundColor);  // from member
          g.setColor(fontColor);  // from member
  
          super.paint(g);
  
          g.setColor(fgColor);
          g.setBackgroundColor(bgColor);
      }
  }
  

  but the final effect is that this field has the custom until the first focus/unfocus font color. When I do not check the isFocus(), police have custom color when the field has focus too.

  Similar do in drawFocus (Graphics g, boolean on) does not solve the problem either.

  I target BB > = 4.6.0.

  Do you know how to do properly without calls drawText custom?

  Kind regards

  Piotr

  What happens if you replace

  If (isFocus())

  with

  If (g.isDrawingStyleSet (Graphics.DRAWSTYLE_FOCUS))

  and (maybe - I'm totally guessing here) substitute drawFocus doing nothing?

  BlackBerry GUI has many peculiarities, so you never know what path is right.

  A word of caution: most likely, you will have also to invalidate() field when it changes its "focused" State Don't do this in onFocus() / onUnfocus()! Those (especially the onUnfocus()) are not always correctly called (BB frame problem). Make your field implement FocusChangeListener and make these invalidations in the method focusChanged() (using setFocusListener (this) somewhere in the constructor).

• Deriving from the country, state/province telephone number Codes

  Is it a practice of good (or bad)?  I want to program a step that derivative of country codes and state/province based on the initial number in the phone field (in our washer contact)?

  For example, if the phone number begins by + 091 (or 91, + 91) the country code must be IN; + 094 would be Sri Lanka.  We would run this step in the case where the perspective between our system with a address freemail (gmail, yahoo, etc.) and a phone number, but nothing else

  Countries might not be bad, but nothing else, and you might not get what you are looking for.  For example, I have 4 numbers on my 'family' of cell phone plan.  I have a number of Texas, my wife a number of Illinois, and one of my other lines is a number of Utah.  With the ease of portability of numbers from carrier to carrier and the appearance of everyone having unlimited long distance (at least here in the United States) no matter if you have a local number, or more.  I haven't lived in Utah in 6 or 7 years, but if I got an email that applied only to Salt Lake City it might not be the best experience.  I was in Illinois for a year and a half and do not rely on the number of Texas (my first) to landing any time soon.

  My 2 cents.