Design mode works only with the external style sheet

Similar Questions

• Hi all. How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Hi all. I am new and on a free trial right now.

  How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Monthly payment included cloud storage?

  Peut I manage backups? And how?

  
  

  -Amir
  

  Hi amireos,

  Yes, you can create your workflow where you can keep all your images on the external hard drive and the Lightroom catalog file as well.

  If you start with Lightroom and then use the Destination location as external hard drive when you import your image of the external source such as a camera or SD.

  If you already have your Images on the Mac HD drive, then play all your Image on the external hard drive first and then import images directly from there.

  Finally, you can change the location of the Lightroom Catalog as well.

  Default location: folder on the Mac Drive HD, there is folder called Lightroom that you can move on the external drive too (however catalog Lightroom can't memory space as its only import previews of the images is not the real image and full)

  Once you move the file catalog Lightroom external hard disk, then you need to browse the catalog file when you launch Lightroom only once.

  See thread: LR catalog moving on external hard drive

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page.

  Dreamweaver CS6 when connecting it to the external style sheet, it doesn't affect all the html page. It started to happen after upgrading to mac osx elcapitan.

  have no idea how to solve this? now I write all my css stylesheet in the head section of my html page.

  Thanks for help

  Best regards

  the problem has been resolved.

  I forgot to write rel = "stylesheet", that was the problem.

• BlackBerry Z10 PrintToGo works only with the new version of OS 10

  Am unable to load files using PrintToGo from the new version (10.1.0.4181) installed.

  Worked fine with the previous version and works with the Playbook (2.1.0.1526)

  PrintToGo error log:

  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.BeginConnect (using ServerIP:192.168.2.102, ServerPort:80)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.EndConnect)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - connected successfully!
  PrintToGoDesktop.exe error: 0: 09/02/2013 11:33:52 - Z10 (2ABE5757) cell phone: EXCEPTION RAISING - System.NullReferenceException: object reference not set to an instance of an object.
  on the EDGE. PrintToGo.UserInterface.Device.UploadPDFFile (String fileTransferURL, String fileName, BackgroundWorker bw, DoWorkEventArgs e)
  PrintToGoDesktop.exe Information: 0: temporary removal PostScript file 'C:\Users\Paul\AppData\Local\Temp\PtB1360.tmp '.

  Resolved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not necessary (played with this for several weeks and market).

• External monitor works only with the Macbook Pro?

  I just bought a Macbook Pro 15-inch (mid-2015, OS X El Capitan 10.11.4) and planned to connect it to my BenQ GL2450HM (he had since worms 2011 for my Windows PC). I had a DVI adapter for them, but the card connects to the cable correctly (as it goes down easy) and then when I plugged it, the monitor gave me a green light for a bit, but finally displays 'no signal' and the screen went black, and yellow light. But when I pulled the cable out of my monitor, he said "no cable not connected" (implying that he entered the connection somehow before that?)

  So, I read while holding down the option key to detect monitors, but that did not work. Put the laptop to sleep and then wake it up didn't work either. I also tried to plug the adapter to DVI/VGA Converter that I have, but they fit together. I tried to plug the adapter directly to the DVI port on my monitor, but they are not at all together.

  I feel, it should be possible to make the Macbook and monitor work together, but I'm stuck to know exactly what needs to be fixed. Probably the adapter or DVI cable, however. Do you have any suggestions?

  I don't see that this is not possible, so I am that give a bump.

• Mid 2012 MacBook Pro starts only with the external hard drive

  I have a MacBook 2012 mid Pro and whenever I try to start it only shows the folder with question mark flashing. But, whenever I plug in my external hard drive, it boots. I also tried selecting the boot drive and the interns don't show, but once in the external plug-in, it shows externally as Macintosh HD. I also tried to reinstall OS X but it says I can't you this player.

  Thank you

  While in the drive external hard, that I hope has the same operating system, can you go to utilities utilities disk-file and run a repair of the internal drive and repair permissions? You could also do the same thing in starting mode of recovery-command keys R at startup. Using the recovery disk utilities. If you can't get the internal drive to show everyone, most likely the drive is bad. Then, you will need to replace it.

• WUSB54AG works only with the safety of the new Netgear rotuer

  Just got a new router.  All my devices connect properly with the exception of the desktop computer that uses an external adapter to wireless of Linksys (WUSB54AG).

  The office is currently running SP3 of Windows XP (home edition).

  The latest driver for the card has been installed (3.0.18.0).

  I am able to connect if the security of the router is enabled OFF.

  The router has 3 security options:

  (1) WPA - PSK (TKIP)

  (2) WPA2-PSK (AES)

  (3) WPA - PSk (TKIP) + WPA2-PSK (AES)

  I understand (from Linksys technical support) is that the device MUST be able to connect using WPA - PSK (TKIP).

  My Linksys monitor indicates that the machine is connected to the access point but not the internet (when I used the WPA - PSK (TKIP).  The IP address that is assigned is 169.254.3.129 and not the 192.168.1.x expected.

  When I disable security on the router, the unit can connect and I'm a 'good' assigned IP (192.168.1.x).

  Ideas on the best way to troubleshoot and resolve this problem would be appreciated!

  AK

  I managed to change a lot of settings on my 2.4 GHz routers network settings.

  After passing it in WPA - PSK (TKIP) and by changing the mode/max speed "reaching up to 54 Mbps" - it works finally.  I guess that 'forced' somehome the router in order to disseminate the tape of 'G' rather than a strip of "N" (just guessing).

  It does NOT work when the router is in "mixed" (security) mode or when the speed has been set at a higher limit.

  Thanks for the info, if.

  I learned a lot during this process.

  AK

• Magic Mouse works only with the latest el capitan

  Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

  Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

  Try resetting the SMC and the NVRAM.

  Barry

• Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

  I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

  In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

  Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

  This is Mac OS extended (journaled) with a GUID partition map.

  OS X will only be installed on a properly formatted disk.

  HTH

  Leo

• GPIB analyzer works only with the Trace of e/s on the same computer

  Following the advice on the basics of knowledge I want to capture Trace IO simultaneously with the

  Capture on the field PC Analyzer.  This is because I have to go on a customer site and only want to

  capture non-intrusive traffic GPIB.  The IO Trace does not capture the field of PC that has the GPIB +.

  card.  When I run IO path on the Test PC, it works fine.  However, I want to avoid encroaching on the

  Setting up clients to say IO Trace Facility.

  If I run a basic series write and read VI. EXE on the PC in the field and to perform only IO capture of this

  works fine (no instrument not attached - just to make sure IO Trace works on PCs in the field).  If I run the NOR

  draw on its own on the field PC, then run the Test PC controlling Instruments, IO Trace is

  does not work.

  At this point, I wonder if Analyzer and IO Trace can not run simultaneously on the same PC?

  OR Trace does not work with GPIB cards +?

  Help much appreciated.  Thank you

  Trace of e/s OR and GPIB Analyzer can be run on the same computer, but not in the way you want.

  The GPIB analyzer is actually a Logic Analyzer, which "listens" for all lines GPIB directly from hardware. For this reason, it can be run from any computer connected to your GPIB topology, even it is not involved in the transers. This allows almost completely corner the bus logging.

  Trace IO OR works with drivers OR Save function calls that are made. These function calls can only be captured the system where they are called, therefore NO IO Trace should run on the test computer. Trace IO NOR will always be a small impact on the time where the test system, due to the time it takes to connect to each call.

  -Jason Smith

• HP Touchpad browser works only with the Cisco Valet Plus router

  I bought a 16 GB HP Touchpad several months ago and had been enjoying his excellent WiFi feature with my old G from Linksys WRT54GS wireless router until I replaced it with a new Cisco Valet Plus (model M20) wireless-N Router a couple of days.

  Although I could easily and successfully, join the Touchpad to the Cisco Valet network, browser fails most of the time to load web pages.   For example, if I go to www.yahoo.com, the browser is going to slowly load the web page, or it will expire with a pop-up message error "Impossible to load the Page.   If I try to select a link from the homepage of Yahoo, it expires with the same message.  And this happens for all web pages.  If the initial page happens at all, I can then from this page a link to any other.

  I know that the issue is not with the router because I have several other devices connected to it and they are all working well, including a laptop HP ProBook, an iPad and a Wii Console, I use to watch Netflix movies on.  None of them has a problem - only the Touchpad.

  If I go into settings-> Wi - Fi, it shows that the Touchpad is connected to Cisco network.  And when I run the diagnostic system, it shows that the Wi - Fi works correctly.

  Does anyone have an idea how to solve this problem?

  I have found a workaround that did the trick.  I had to change the channel setting auto on a coded hard 1 channel wireless.

  Now, the Touchpad works very well, as well as all other devices that have worked.

• Application works only with the WAP. good with wifi

  My application works fine with wifi connection, but does not not with WAP GPRS.

  + 2 days devoted to this subject, but no success.

  Here's the code...

  Hi mantaker, yet I don't have the solution to my previous problem.

  my application using httpconnection and his fine work with Wi - Fi (the device). obtain data from the servlet. I want to use GPRS EDGE. I tried the very last day. but it's not working. even I had the name of the apn, the user name and the password. but it's not working with GPRS. Deploy the NetworkDiagnosticPublic application on device even his also does not work with WAP. and not getting not response. only works with wifi. Here is my code. n my wifi connection successfully application, but I want to do with the GPRS Edge code is

  connThread.get("http://*********.30daytrial.webappcabaret.com/Zain_Servlet/second?f1="                            + NameTextField.editField.getText()                            + "&m2="                            + AreaTextField.editField.getText()                            + "&l2="                            //+ LastTextField.editField.getText());//NOT WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;ConnectionUID=" + getWap2TransportUid());//NOT WORKING                            + LastTextField.editField.getText() + ";deviceside=true");//NOT WORKING                            //+ LastTextField.editField.getText() + ";interface=wifi");// WORKING                            //+ LastTextField.editField.getText() + ";deviceside=true;apn=internet;" +                            //"TunnelAuthUsername=internet;TunnelAuthPassword=internet");//NOT WORKING
  
     private static String getWap2TransportUid() {
  
       // Get the service book records for WAP2 transport.          ServiceRecord[] records = ServiceBook.getSB().findRecordsByCid("WPTCP");
  
            for (int i = 0; i < records.length; i++){
  
                Dialog.alert("Service: " + records[i].getName());         }
  
             for (int i = 0; i < records.length; i++)           {             ServiceRecord serviceRecord = records[i];             String cid, uid;
  
                if (serviceRecord.isValid() && !serviceRecord.isDisabled()) {                 cid = serviceRecord.getCid().toLowerCase();                   uid = serviceRecord.getUid().toLowerCase();
  
                if (cid.indexOf("wptcp") != -1 && uid.indexOf("wifi") == -1 && uid.indexOf("mms") == -1) {                    Dialog.alert("New ::  "+serviceRecord.getUid());                  return serviceRecord.getUid();                    }             }            /* String recordName = serviceRecord.toString().toUpperCase();             if (serviceRecord.isValid() && !serviceRecord.isDisabled() &&                     serviceRecord.getUid() != null && serviceRecord.getUid().length() != 0 &&                     recordName.indexOf("WAP2")!=-1)
  
                 {                 Dialog.alert("recordName: " + recordName);                     String uid = serviceRecord.getUid();                    Dialog.alert("UID="+uid.getBytes());
  
                     return uid;               }*/           }
  
            return null;  } 
  

  
  

  Yes peter, there are a lot of thread having the same issues...

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38541#M38541

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38328#M38328

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=38316#M38316

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=38157&view=by_date...

  always loads UN stuck

  See you soon...

• RV220W works only with the PPTP server on one VLAN only

  Hello

  I have a RV220W (firmware 1.0.3.5) but I can't seem to work with the PPTP server on one VLAN only.

  My default VLAN is in 192.168.1.1/24.

  I created a VLAN ID 10 in 192.168.50.1/24 inter - vlan routing: disabled and device management: disabled.

  (Menu network > LAN > belonging to a VLAN and multiple VIRTUAL local network subnets).

  Then I configured a PPTP server on the IP 192.168.50.200 to 192.168.50.210 range.

  Finally, I created my user.

  (Menu VPN > IPSEC > VPN users).

  The PPTP tunnel is at work, but on all of my local network and not only the VLAN ID 10.

  Any idea? ...

  This seems to be a limitation of the firmware 1.0.3.5. Firmware 1.0.4.x will support the rules on access inter - VLAN, which I hope, can be used to restrict traffic VLAN by default your VLAN ID 10.

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• IMessage works only with the last update in elcappitan

  Why not send iMessages on my iMac since the upgrade to the latest version of El Capitan?

  Hey lahugus,

  I use iMessage every day and if it stopped working for me all of a sudden I wouldn't be happy.

  I would first double check the messages preferences and check iMessage is enabled and that you are connected with the correct ID of Apple.

  If that is correct, turn off the computer, and then turn it back on and test again.

  If it does not sign iMessage and then again in it.

  These steps should solve your problem.

  See you soon