Design of the relational database when installing essbase version 11.1.1.3.0

Similar Questions

• EMP tables in the relational database

  Hello
  Can you please let me know what is the tables are actually created in the SCHEMA (Shared services) or EAS in the relational database. It's when configuring EMP that tables are automatically created in the database?
  
  Appreciate your comments and thank you for your time.
  
  Thank you
  Hari

  Yes the tables are automatically created and filled at the point of configuration.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Satellite M30: random characters came on the screen even when installing

  Hello

  I have problems with my Satellite M30. It shows random characters or signs on the image. Other than this computer works well. I thought it could be virus, because I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.

  So I reinstalled it but random characters came on the screen even when installing. If anyone can advise what this could be?

  My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

  >... I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
  > Then I reinstalled it but random characters came on the screen even when installing. Can someone advise what this could be? My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.

  For me it also looks like a GPU malfunction... what you is to connect the external monitor to the laptop. If the same strange signs, characters will be visible on the second screen while the GPU is defective...

  Well, it would be the worst case, because the whole motherboard must be replaced in case of malfunction of a GPU chip...

• What to do for the main database when a physical database ensures converts a standby time of the snapshot

  Hello

  Need of the primary database to implement the flashback database when a physical database ensures converts a standby time of the snapshot? Or something to do with the primary database? I find some documents this work to allow the return of flame for the primary databases, but I think that he didn't need to do.

  Thank you

  Best regards.

  I did recently, I have not configured flashback on primary, only configured in the standby mode. I converted the standby database and restored the changes after the test. Primary database continued to send archives to the standby site. Instant once converted into sleep mode, as mseberg mentioned overlaps with the sync state after starting MRP.

• computer "bug" after "acceptor of the license agreement" when installing Elements 6, IMAC.

  computer "bug" after "acceptor of the license agreement" when installing Elements 6, IMAC.

  Are Harley94140 you face to difficulties to accept the license agreement?  What version of Mac OS are you using on your iMac?

• Planning Workflow - metadata in the relational database

  Hello
  
  In the metadata in the relational database, there is only an ID for almost every column. I would like to have names for these IDs so I can understand more clearly what is happening. Mainly concerning the workflow, I like to check in the database, what happens.
  
  Is this possible?
  
  Thank you very much

  Hello

  Most of the IDS will link to the table of hsp_object

  So an example of discovering the name for the first two columns (plan_unit_id and scenario_id) in the hsp_planning_unit table

  Select puobj.object_name as 'PlaningUnitName', scenobj.object_name as 'Scénario' of
  pu plansamp.hsp_planning_unit, plansamp.hsp_object puobj, plansamp.hsp_object scenobj
  where pu.plan_unit_id = puobj.object_id
  and pu.scenario_id = scenobj.object_id

  You can extend it to include other columns such as version, entity...

  additional columns that don't point to hsp_object are

  last_column colum = 0 = promote; 1 = rejection; 2 = approve; 3 = approval; 4 = start; 5 = exclude
  process_state = 0 is not started.; 1 = first pass; 2 = under review; 3 = approved; 4 = closed; 5 = unsigned out

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• is the complement of Exel for Essbase Version 11.1.2 compatible with Office 2010?

  Hello
  is the complement of Exel for Essbase Version 11.1.2 compatible with Office 2010?
  Someone at - he had-Excel add-in to work with Excel 2010?

  Hello

  I understand that this only is not officially supported yet although I heard that people had the addin working with excel 2010.
  I think the best is to try it and see if you are happy.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• CS6 Web & full Design, more the CS6 Master Collection install

  I am freelance pro and educator. I currently have (and installed) a comprehensive package of CS6 Web & Design Premium I will teach After Effects in the fall (which is NOT part of the Web package & Design). I recently bought the CS6 Master Collection version of the educator. I'm not quite sure of how to install the new Master Collection, since this is the limited version of the educator. Should I keep the complete collection of Web & Design using the current license complete and then install After Effects by itself using the license of the educator? Causing conflicts? OR should I uninstall the Web & Design and do a full install of the version of the educator of the CS6 Master Collection?

  You see, the conflict for me is I'm doing professional, paid work, mainly with Illustrator, Photoshop and Indesign.

  You can continue to use your Design and Web premium.

  And for After Effects, you can just install After Effects of the Master Collection.

  When you start the installation, you will get the options to choose what you want to install applications, where you can choose to After Effects and installation to educational assistance of license you have.

  With this, there will be no conflict.

• Restrict access to the Page of the user in the relational database

  I have a relational database with two tables on a common ID field. The user can access all their entries in the child table with simple SQL queries and then select from a list of correspondence which of its documents records in the child table that they wish to change (i.e. ['ID'] ParentTable, ChildTable ['ID'])). Registration is then displayed using $_GET passed through the URL as parameter "recordID". However, when the user is connected and accessing a folder that matches the query, they can then enter another "RecordID" number in the URL and go to any record in the table child whether they are 'owner' of the record or not.
  
  I tried to put a statement of equivalence in the authorization user code to restrict the access to the child records users since ParentTable ['ID'] == ['ID'] ChildTable only when you are connected the user accesses the records they created previously. (In other words, when a user type a different "RecordID" in the URL, the ParentTable ['ID'] and ChildTable ['ID] are not equivalent.) The code that I entered in the authentication of the user generated by DW is as follows:
  
  If ((isset ($HTTP_SESSION_VARS ["MM_Username"]) & & ($row_ParentTable ['ID'] == ['ID'] $row_ChildTable))) {}
  ...
  
  Is still not accessible, even if tests show the ParentTable ['ID'] and ChildTable ['ID'] are not equivalent
  
  Any ideas on how to restrict access to the child records "unknown"? I'm sure it's relatively simple, but I'm having trouble to get through this obstacle.
  
  Thank you

  Thank you, Philo. In fact I got it to work by initializing a session variable of tha parent ID of the table and comparing it to the variable ID of child table, then using a header redirect in case of inequality. Part of my problem was where I put the code in the page. Anyway, it works now. It seems that the answer is always just after you have posted the question.

• Firefox 8 ads make look it good with all the possibilities, but when installed it's like the old Firefox and the news is simply not there.

  Firefox 8 ads make it look good with all the possibilities. But when installed it's like the old Firefox and the news is simply not there. Why bother to install the most recent?

  Right-click the menu bar and uncheck the option menu bar.

• then restart the laptop but when installing loading file comes portable stop and start again, then window 7 starts with the non-genuine version

  * O.T. > genuine os

  I real operating system of Windows 7 when I get the window update 10 at that time there I download laptop is restart but when installing password file loading then laptop stop and try again and window 7 is then start with no authentic version what to do to get a license back I know product key unique for this window I don't strip license the back of the laptop or not just any what CD what do I do

  How to: fix Windows 7 or Windows 8.1 active or true reports after cancellation of Windows 10

• I have restore discs, but they are not visible to the E drive when installed says missing Windows Installer

  I am trying to reinstall windows 7 after an accident, now it won't let me use the discs I bought, because windows install doesn't work or is not found?

  Could be a defective DVD. Download the right file .iso Windows 7 version (listed below), use the file .iso image to create a new installation DVD, boot from the DVD and re - install Windows.

  Windows 7. ISO files that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Unable to connect to the database when installing BI EE 11 g

  I want to install Oracle BI Enterprise Edition 11g Windows XP service pack 3.
  I used successfully of the repository creation tool to create the schema DEV_BIPLATFORM.
  
  Then I ran the main installation of Oracle BI program.
  "To halfway through the stage of" details of the database "requires the connection string, the user name and the password.
  I enter in these exactly as they should be, but still get the error:
  INST-08029: unable to connect to the database with the given credentials.
  
  The details that I use are:
  connection string: ltest2:1521:dwRialto
  username: DEV_BIPLATFORM
  password: DEV_BIPLATFORM
  where ltest2 is a Linux SS5 host running Oracle 11.1.0.6 EE. The service name is dwRialto.
  
  Physical connectivity is definitely ok, as evidenced by the fact that I get error 'INST-08035' if I change the name of the service for something not valid. Also, I get a different error, 'INST-08031' if I change the user name or password to something invalid. I have also granted SYSDBA and DBA DEV_BIPLATFORM, but still does not work.
  
  In addition, to be sure, I installed and executed on the same Windows PC SQLDeveloper - and that works very well, using the same credentials.
  
  Why the 11g BI Setup does not accept these credentials? I can't further with the installation until it does.

  Hello
  We had the same problem an hour ago
  What we did was drop the user through the official way to the rcu, re-create the user but this time with a different password (in our case, so DEV_BIPLATFORM/oracle)
  and then we continued without problem :)

  Good luck

  Published by: jopgenoo on August 23, 2010 07:05

• Confusion with the Oracle database edition installed

  Hello Experts,

  Greetings!

  I installed Oracle RAC on RHEL 6.4 11.2.0.3. While installing an Oracle database, I chose the Standard edition, but after when logged into SQL Prompt, he showed me the 'Enterprise Edition'. I'm really confused and really not get what was not in it.

  Please guide.

  Thnks & Rgds Bst

  Kapil Emmanuel

  Hello

  You can grep the db_InstallType of globalvariables.xml to find grid or Database edition binary as shown in the example below.

  [grid11@server1 oracle.crs] $ cat /oracle/app1/11.2.0/grid_2/inventory/globalvariables/oracle.crs/globalvariables.xml | grep db_InstallType

  "" "" SSIGNMENT = "T" HANDLE_ERRORS ="F" VAL_REQD = "F" SAFE = "F" SUPPRESS_ON_SILENT ="F" DESC_ID = "" / >

  [grid11@server1 oracle.crs] $ cat /oracle/app1/oracle/product/11.2.0/db_2/inventory/globalvariables/oracle.server/globalvariables.xml | grep db_InstallType

  "" "" SSIGNMENT = "T" HANDLE_ERRORS ="F" VAL_REQD = "F" SAFE = "F" SUPPRESS_ON_SILENT ="F" DESC_ID = "" / >

  Thank you

• Why do I get the error 1722 when installing the Driver CD with Windows XP?

  I have a problem to install the drivers CD, it displays a message saying that an error 1722 has occurred

  Has tried to do what you say on this topic: http://digital.ni.com/public.nsf/websearch/34ABE6F20DD4981D86256E8600752DFE?OpenDocument

  But in step 10, when one tried to select the property "Replace entries permissions for all child objects by the entries displayed here and that apply to child objects" and aply, the PC showed an error saying that the registry editor can not set this key selected security or one of its subkeys.

  I tried to install after that and showed the error 1722 again.

  Have you also tried to turn offanti virus?