design Simulator problem

Similar Questions

• Designer form design console problem

  Hi all
  
  I have problem on 11g r2 design console
  
  It is:
  
  (1) can we delete the custom or by fields of form of default process in the form designer
  
  
  The problem is that I deleted the form field to process custom in the form designer with unfortunately I deleted the default one that is * "UD_ADUSER_USERPRINCIPALNAME."
  After that the version is activated. Now, I add by default one by creating the new version, but it is not save and version no activation.
  
  I get the error like this during activation of the version
  
  * "A newer version of the form defined by the user does not contain all the fields are mapped to the reconciliation.: new version of the user defined the form does not contain all the fields are mapped to reconciliation." Update has failed. "
  
  If I go to the previous version, it also shows the same error and does not save and activate the version. I just did the above deleted operation and still, I'm trying to adding that fields with the new version, I'm getting the problem above
  
  In server registers the error like this
  
  *****************************************************************
  < error > < XELLERATE. SERVER > < BEA-000000 > < class/method: tcSDK/validateReconciliationFieldMappings error: latest version of the user-defined form does contain all fields that are mapped to reconciliation. >
  < 31 March 2013 03:19:33 CEST > < error > < XELLERATE. SERVER > < BEA-000000 > < class/method: tcDataObj/save error: failed to update data >
  < 31 March 2013 03:19:33 CEST > < error > < XELLERATE. DATABASE > < BEA-000000 > < class/method: tcDataBase/rollbackTransaction some problems: Rollback performed
  java.lang.Exception: Rollback performed
  at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(tcDataBase.java:610)
  at com.thortech.xl.dataobj.tcDataObj.rollback(tcDataObj.java:904)
  at com.thortech.xl.dataobj.tcDataObj.doRollback(tcDataObj.java:867)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:538)
  at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2910)
  at com.thortech.xl.ejb.databeansimpl.tcDataObjectBase.save(tcDataObjectBase.java:177)
  at com.thortech.xl.ejb.databeansimpl.tcSDKBean.save(tcSDKBean.java:99)
  at com.thortech.xl.ejb.interfaces.tcSDKEJB.savex (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy398.savex (Unknown Source)
  at com.thortech.xl.ejb.interfaces.tcSDK_hxpdpf_tcSDKRemoteImpl.__WL_invoke (unknown Source)
  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
  at com.thortech.xl.ejb.interfaces.tcSDK_hxpdpf_tcSDKRemoteImpl.savex (unknown Source)
  at com.thortech.xl.ejb.interfaces.tcSDK_hxpdpf_tcSDKRemoteImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
  >
  
  ************************************************************************************
  
  Please help me,
  
  Kind regards
  Surender Reddy
  
  Published by: 972002 on March 31, 2013 20:16

  This form is attached to a resource specific IE, for a definition of specific process of a resource.
  In this definition of process under reconciliation field mapping, the deleted column is always mapped.
  This is the reason why you get this error. If you want to remove any attribute of form, first remove the reconciliation field mapping in the definition of the process.
  Remove the column attribute / and activate the version.

• Function of memory in the loop control and Simulation - problem of the ODE Solver

  Hello

  I'm correctly using the control loop & simulation to simulate the behavior of what is essentially a shock absorber-spring-mass system. In the process of change in time (dt) is used to integrate an arbitrary value. I use a rack depending on memory to store the time, to calculate the change of time (dt).

  The simulation is quite complex, because of the precision required, not all the ODE solvers can all support. Currently I use the Adams-Moulton method, this works very well for the simulation. However, it cannot detect the change in time, the change is constantly zero. This problem has auto market by using an another ODE Solver, but then the simulation has been messed up instead (even when I listen to the step sizes and tolerances). So I'm pretty confident that Adams-Moulton is one of solver ODE best suited to the problem at hand.

  Is there another way to store the previous hour and use it calculate lag, that the use of the memory function? Everyone knows about these problems before?

  I did a lot of research of error using the probe, but I'm sure that there is a problem with the ODE Solver and memory function. See the image below, showing basic how is calculated the change in time.

  I'm pretty new to LabVIEW, so if there is something else I missed I would be happy to hear it.

  PS! I set the tolerance minimum step of size/relative and absolute for the Adams-Moulton to simulate the behavior of the system properly.

  Problem solved!

  It turns out that the ODE Solver has struggled because of two "table 2D find" used functions. This was created for the interpolation/extrapolation, which caused a problem constantly and the ODE Solver could not resolve correctly, so the functions of memory doesn't work does not correctly or the other.

  By increasing the table manually, I could use closest method instead, with also good results as interpolation.

• BBM MDS Simulator problem

  I'm developing an application that needs to send something via BBM surveys, so I wanted to try it. The problem is that I can't get the BBM Simulator to run. I followed the instructions found on the Blackberry Messenger page, but when I run run.bat it says the following:

  Error image

  (why can I post the image directly?)

  -Java SE Development Kit 7 installed: C:\jdk1.7.0\

  -Java JRE installed: C:\jdk1.7.0\jre7\

  (Note that there is another folder of jre: C:\jdk1.7.0\jre\) Variable JAVA_HOME points to: C:\jdk1.7.0\

  Added "C:\jdk1.7.0\bin\;" to the front of the path variable.
  Copied files local_policy.jar and US_export_policy.jar both

  • (1) C:\jdk1.7.0\jre\lib\security; and
  • (2) C:\jdk1.7.0\jre7\lib\security

  (I first copied them only in the C:\jdk1.7.0\jre7\lib\security, but it says "have you installed unlimited strength jurisdiction policy files?")

  I have downloaded the SDK, extract the contents of "C:\BBM\", mounted in the MDS Simulator and extract the content as well.

  Running Windows 7 64 bit.

  What I'm missing here?

  Is the JDK 1.7 32-bit?  I have not tried with 1.7, only 1.6.

• install app world 2.1.0.39 on simulator problem

  Hi, I'm playing with the app in payment system but having problem installing app world version 2.1 + on the Simulator.

  What is the correct procedure to present an update to the Simulator? For the moment, I'm just the download and installation of the update the same to me on the real device.

  Please help me! Thank you!

  Found the solution! Just in case someone else wondered in the future, all you need to do is goto inside your browser Simulator blackberry.com/appworld/download, then install it normally but don't restart. He will remain in the Simulator until you run clean.bat

• Connection of Simulator problem

  Hello

  I can not connect Simulator anywhere.

  If I try to access browser Simulator somewher, it shows this message:

  "You are not currently in an area that can handle the communication of data. "Therefore, the browser could not retrieve all of the Web pages.

  If I try to run an application that performs a httpconnection I get an IOException exception: Tunnel failed.

  I know it was something that they did in my company to limit or control my Internet because I used to connect before, but since yesterday same time not the programmer could connect emulator plus.

  What I need to know, is that the Simulator should connect and check it out.

  Thanks in advance.

  Thanks for your reply, we have already solved this problem.

  

  It has been turned off Mobile network option.

• 8220 Simulator problems

  I followed the tutorial of the HelloWorld using the 4.6 JDE application plugin for eclipse. For the simulation, I used the 8220 and had a few problems with it:

  1. it takes about 15 minutes... Yes 15 minutes! for a good start. (shows an hourglass for most of the time).

  2. after starting the application is NOT in the downloads folder.

  Do anything wrong...?

  Hello

  Take a look at this thread

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&thread.ID=51271

• New computer, transfer CS4 Design Premium problem

  I had CS4 Design Premium (education) on my 2006 MacBook Pro. The computer crashed, I bought a MacBook Pro 2013 and I am trying to transfer the license or product on the new computer. I don't have the original disks, but I had saved the software in Time Machine. CS4 downloaded on the new computer, but it gave me a license error when I tried to open it. I uninstalled on the Mac to 2013, got my serial number of MyAdobe and I am try to download again, but it tells me that my serial number is not valid.

  I found through the forums/troubleshooting there are a few reasons why it doesn't work:
  -New material/new Mac software is not compatible with CS4

  -All products in the suite has its own serial number and must be entered individually * (I don't know where to find these individual numbers)

  -Teaching discs purchased through 3 parts (College Library) might have codes different series/product numbers

  Anyone have an idea how I can do this freakin thing ' work? I need to get my CS4 working again for school/work and cannot afford to buy another version.

  Thank you!

  CS4 is compatible with lion, lion mt and the mavericks, but NOT to transfer the files.  use the installation files to install your programs.

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• Microsoft Train Simulator problems under Windows 7

  I recently got a new computer with Windows 7, 64 bit.  It has Intel HD Graphics 4600, 10.18.10.3574 driver version

  I installed the program from my original CD with detailed instructions on one of the dedicated websites, installed in the directory c:\\msts\, installed the Train_Update1, the class 50 and SD40-2 updates.  The installation went well with no problem.

  I restarted my computer and click on the icon to start the program.  He started without calling for me to insert the CD, well.  When it happens it displays all kinds of weird characters on the screen.  I can see the program in the background, but the display is watered.  I run Task Manager to exit the program.

  Is this all just not compatible with graphics Intel 4600 or someone can give me advice on how I might be able to get this program on my new computer.  It works fine on my old Vista computer.

  Thanks in advance.

  Hello

  This link says it is compatible with Windows 7.

  You can try the steps above link that is given to the terms of community discussions.

  Thank you

  Stephanie Podder

• HTTP connection on BlackBerry 9000 Simulator problem

  Hello

  I'm launching of the HTTP demo on BlackBerry 9000 Simulator. Demo works well, but don't make any connection. He keeps trying, and after a while, I get the error message below

  

  It shows "java.io.InterruptedException: Local connection has expired after ~ 120000' demo area of the screen."

  I start the Simulator MDS_CS according to the documentation. My Simulator shows also "Zéro" signal strength that I try to change by "simulate-> network properties, but there is zero.

  I am not able to access any URL through Simulator browsor as well. When I try to see the me following message

  

  Please adivce.

  On the Simulator, go click the 'Manage connections' and see if your radio is turned on.

• Dream Weaver cc Design view problems why is completely different design of the live display view

  Why Why oh why oh why is the cc Design view completely different from live view - live mode view is good, but virtually nothing is editable. How the hell can Adobe market a web as wysiwyg design tool when design mode is terrible. I saw old messages regarding this versions in 2014 and 2015.

  I'm not completely illiterate code but I would change the drawings etc. without digging deeper into the code. It's 2016 I stopped using the ages of tables there are available to my creations, but it seems that all cram into a table is the only way to get a half-decent idea of what is happening in design mode. I use a Mac which probably didn't help, but in the interest of the essential may be easier not more difficult.

  If it is true that Dreamweaver is really only for kernel developers hard, they should say so and start promoting Muse or similar for people who don't want to spend hours crafting code in all the different possible options such java php etc to produce a well-designed functional Web site.

  Does anyone know if there is a solution to this

  Design view has always been horrible to show you the design of the site, but some things worse.

  It does not run scripts of any type and more advanced css is completely invisible to the it. Code errors will also break Design mode almost instantly. Make sure you're validating your code under file > validate > validate the current document (W3C) or going directly to the validator online at http://validateo.w3.org/nu. Pay close attention to any structural errors listed are those that make the Design view go nuts.

  For what it's worth, DW is not really a wysiwyg program in the strictest sense of the acronym, regardless of how many guys at Adobe marketing wanted to believe this claim. DW requires a solid knowledge of html, css and javascript to get the best out there for static sites. These days, we use floats CSS, margin, padding and display properties to build our page layouts. While the program comes with base layouts, you can click to start with, do not understand the desire of "why it works" quickly cause massive frustration levels.

  If you really don't want you your hands dirty with the code, or simply do not have the time to become familiar with the basics of html and css, Adobe Muse would probably be a better option for you.

  Here are some links that will help you to understand its relationship to format html and css, and I hope that allow you to make more sense to DW:

  http://www.w3schools.com/HTML
  http://www.w3schools.com/CSS

• Start OIM Design Console problem

  Hello
  
  After installing WebLogic 10.3 and Oracle Identity Manager 9.1.9.1 on Windows 2003, I installed the OIM design Console. When you try to start the Console of the design using the xlclient.cmd, I get the error "java.lang.NoClassDefFoundError: Design» I tried to include libraries in the classpath and copied the weblogic.jar in the directory xlclient/ext. I use jrockit_160_05.
  
  Any help is greatly appreciated!

  Hello
  try to re - install the console design and remove the spaces in the path to your installation directory (if you put space...).

• Design application problem module

  Hi all
  I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0
  
  In my application I am below model following
  
  1 Root app and 3 module application nested under the root to use connections less DB
  
  RootAppModule
  NestedAppModule1
  NestedAppModule2
  NestedAppModule2
  
  2 - I have a few common data from REF discover objects used by all 3 nested zeros, so I add only in RootAppModule
  
  If I go with above model I can't access Ref data display objects in NestedAppModules
  
  If I extend RootAppModule in NestedAppModules then I can access objects from view but I get error in the request below module Tester
  
  Houston-25226: Application module System definition model. NestedAppModule1 contains the recursive reference AM
  
  seems to nest and extension works only at the same time
  
  My Questions:
  
  1. won't my habits?
  2 - What is best model to implement my use case?
  3. should I have add Ref under all NestedOnes data display objects (looks bad for me)
  
  Appreciate your comments
  
  Mohsen

  Mohsen,
  To access the root am necessary h call you getRootApplicationModule() nested ApplicationModuleImpl gives you the year root which your cat to your root class am class impl. Now you can call each root method you like...

  Your questions
  (1) No, the boss's ok
  (2) you have described here
  (3) No, you access the root am am am required to access the root method.

  Timo

• Space required on target RT for LabVIEW Control design and Simulation

  Hello

  I want to run a DLL file on an RT target using LabVIEW Control design and Simulation, but I'm not sure of the required amount of RAM on the RT-target. My RT-target options are respectively cRIO 9002 and cRIO-9004 with 32 and 64 MB of RAM. Is this a sufficient amount of RAM to run the simulation? ¨¨

  Thanks in advance

  This will depend on the size of your dll, the size of the rest of the code, you can create other necessary drivers/modules, memory use when your application runs, etc.

  9002 and 9004 have not a lot of RAM on them and the minimum software installation to run a control application Design & Simulation (CD & Sim) will take around 22Mo of it (the majority of RAM available to the 9002). It would be possible to run your application on these two controllers if you keep it small but it will depend on what you want to do.

• Error: "you have insufficient disk space to install this product" during the installation of flight simulator

  Original title: installation of Flight simulator problems

  Hi all, when trying to install deluxe Flight Simulator (FSX) on an older desktop with windows XP, I get the message "you have insufficient disk space to install this product on the drive selected, if there is more than 11 GB of free space. Any surgestions or help would be much appreciated because it is get annoyed and my son guard harassing me, thank you.

  Hi MartinHenry,
   
  -In what drive you are trying to install the game?
   
  Note Flight Simulator is usually installed on the drive C, unless another location is specified by you. So be sure that you have enough space in drive C to install the game.
   
  Here are some articles that you might find useful. Try the methods listed in the items donated for this problem.
  Error message when you install a Microsoft game or a mapping program
   
  You receive the error "your computer is running out of memory" message when you start Flight Simulator