DesignJet 1000 Plus Series: JetDirect 680n (wireless) & DesignJet 1000 Plus - what is the required minimum firmware revision?

Similar Questions

• On both my laptop (Win7 32-bit and 64-bit), Gmail in Firefox (since v.31) was prevented opening by Adblock Plus - what is the cause?

  Other extensions in my Firefox are:
  1-click YouTube Video Downloader
  Avast Internet Security
  BetterPrivacy
  BetterSearch
  Shareaholic

  Adblock Plus has worked perfectly until Firefox reached v.31 when, suddenly, in both my laptop, he started to prevent the opening of Gmail.
  5 other extensions disabling has no effect.
  Disable Adblock Plus (with the other 5 extension enabled or disabled) immediately solved the problem.
  The problem does not occur in Chrome.

  Have you tried the troubleshooting ABP filters?
  There is a column "last shot" in the list of filter rules that will show you when the last time that each filter are used. It is easier knowing exactly what filters are used when a web page is opened. From there you can begin to turn off the filters to understand that we or those who are causing your problem with Gmail.

• IHAVE XPPRO my Device Manager indicates that I can not use my Logitec wireless mouse quote 10 what is the code that.

  My Device Manager will also accept not my wireless keyboard I have logitec

  Hello

  You can check this link:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

• WIFI ON MY SONY VAIO E SERIES SAYS WINDOWS WIRELESS SERVICE DOES NOT

  My Sony VAIO E Series windows wireless service does not

  the computer says that

  Hi Isabel,.

  1. Exactly when you receive this message? It's trying to access wireless internet?
  2. What is the exact model of your PC laptop Sony Vaio E series?

  Make sure that the laptop wireless switch is turned on.

  Method 1:

  Please follow the steps to start the WLAN service.

  1. Press the Windows key and R together to open run prompt and type services.msc
  2. Select the autoconfiguration WLAN service in the list, right-click on properties
  3. Change the startup type to automatic
  4. Click the Start button
  5. Click on apply, Ok.
  6. Restart the computer and check if it works.

  If the problem persists, proceed from the link below to fix this problem.

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Reply to the post with an up-to-date report of the issue so that we can help you further.

• DesignJet T2530: How to save the file to the memory of the printer to the flash player?

  We had printed a 19 page file with our DesignJet printer and then deleted the file from our desktop. Customer had need another copy so we printed from the file saved in the memory of the DesignJet. Question: How can I put that it was saved on a USB? Thank you very much!

  Hello

  But remember this file is a temporary file until that backup file more, all are County for sequential printing job. It is not possible to copy for the thumb of the printer.

  Thank you
  Rashed

  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.

  If your problem is resolved please click the button "accept as a Solution.

  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• Designjet T120: T120 - sustainability of the printhead Designjet

  Consider buying Designjet T120 for a small office, where my question:

  What is the sustainability of the print head? (how many pages can be printed)?

  With almost all designjet hp I've seen over the years, the print head life is never determined by the number of pages. There are just too many variables.  Unlike most printers Designjet the T120 T520 doesn't have a separate print heads, but is rather a unit and is replaced as such.  I have not heard or seen any problems with the printhead on this model, so I guess that it will last several years.  With printers Designjet most lack of use is the cause of most of the problems with the printheads.  Also do not have the cart placed above the service station causes problems.  Example the belt has a problem for the plotter stops in the middle and the user plan nor get the fixed tracer for over 2 weeks.  This has a detrimental effect on the printhead (s) as they tend to dry out when not capped.  The correct use and fairly constant use of designjet keep the printheads for years.  I have repaired several hp Designjet printers where the print heads are more than 10 years and still works fine.  However I maintained Designjet printers where the print heads spoil in less than a year with most of them in the latest, due to lack of use.  I also perfer for guests to leave their tracers on all the time.  Less stress on the components as they go through many electrical test when the first being enabled.

• DeskJet 3050 a 1611 series to print wirelessly on Mac 10.10 yosemite

  How can I get my deskjet 3050 a 1611 printer to print wireless on my Mac 10.10 Yosemite WIRELESS?

  Agustin-Pinales Hello,
  There are two ways that we could get this to work, depending on your configuration. I would ask that you close the other post on the installation that you made so that others can find what was the solution, simply click "accept as a Solution.

  Now on your desktop with the way to wireless configuration. If you have a router that allows the WPS to be pushed, follow these steps.

  Option 1 - connect the printer to the network via the WPS button:
  On the police of the printer control panel
  1. press on the icon Setup - looks like a key
  2. Press 'OK' for 'Wireless '.
  3 use it up or down buttons on the right to select "Wireless Configuration".
  4. Press 'OK' for "Wireless Configuration".
  5 use up or down buttons on the right to select "Wi - Fi Protected Setup.
  6. Press 'OK' for "Wi - Fi Protected Setup.
  7. it will say you have two options, simply press the OK"" button.
  8. Select the 'Push' button for Setup WPS promotion
  9. follow the prompt on the printer press the WPS button on your router
  10. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  You can follow the same steps above to enter a PIN, just change step 8 for "PIN" and follow the steps.

  At this point, when the printer is connected to your network, you should be able to follow the steps to add new printer

  Option 2 - Connect using the utility (printer installed and connected via USB)

  1. click on the Apple in the left menu bar
  2. click on "System Preferences."
  3. click on «Printers & Scanners»
  4. click on the "HP Deskjet 3050 has" on the left to highlight
  5. click on the button «Options & supplies»
  6. click the button of "Utility" in the upper right
  7. click on the button "Open Printer Utility.
  8. double-click on the icon "Wireless Configuration".
  9. If your Mac is connected wireless, choose Yes, 'keep these settings', then press the continue"" button.
  10. Select 'Allow' If a confirmation is requested
  11. click on 'done '.
  12. close the 'utility '.
  13. click on "OK".
  14. follow the steps to remove the old printer connection and add the printer with the new connection to the list of printers below

  Delete the print queue of the printer HP printer (unplug the USB cable to the printer)
  1. click on System Preferences
  2. click on Printers & Scanners
  3. click on your printer HP to highlight, then click on the "-" symbol below to remove it from the queue
  4. click on the button "Delete printer" to confirm

  Add the HP printer in the print queue
  1. click on the symbol '+' at the bottom left
  2. If a drop down list with the printers menu appears, just click on "Add printer or Scanner..." »
  3 select your printer HP printer or series (depends USB/Ethernet/WLAN connection type, so choose your HP printer with the correct connection, IE Hello for printers single function and Hello to an MFP multifunction)
  4. after the lower filled, click on the drop down menu to "use:" and select your HP printer series
  5. click on the ' Add ' button.

  You can also click on the link below for the other steps, if you need assistance. Or post here your results.

  Mac OS 10.10 Yosemite and HP printer supports

   

• Photosmart e-All-in-on HP 6520: HP Photosmart 6520 series, 10 Windows, wireless, is suddenly in offline mode, how do I get it online?

  6520 printer Photosmart HP e-all-in-one series, Windows 10, wireless, is suddenly in offline mode, how do I get it online?  One minute, I have the impression and the next it is disconnected.  I printed both the printer status report and test results of wireless network who say everything is good and passes.  I downloaded "HP Print and Scan Doctor" from the HP website.  He said: ' comprehensive software product is not installed on this computer. " In order to use all features of your product, you must install the full software solution.  To download and install the complete solution, click on the button 'Install software' (recommended)'. The first time I hit install there was a mistake, I was frustrated.  Then I saw that I could run again and this time it worked, or so I thought.  He only printed a test photo! If after all that that my printer is still shows as "OFFLINE" when I try to print my laptop.  In the printers menu, he says he is now "Web-enabled" and gives me his own e-mail address...  So after 2 days of verification of Web sites to find answers, now I can not connect my laptop to my wireless printer more?  I need to print from anywhere in the world, I need to print from my home to my printer, wireless...  UGH!  Someone please help me, tell me it's something simple I'm missing just...

  Hello

  For simplicity, just use the port that works,

  HP ePrint lets you print from oveseas to your printer via the email address of the printer.

  Hope that helps.

• HP Photosmart Plus connects to the wireless network

  I'm trying to connect my HP Photosmart Plus B209A to my wireless network. My wireless router doesn't have the WPS ability to connect. When you print the worksheet diagnosis network radio printer seems to work fine as it recognises my network and my neighbours networks 3 being active. When I try to connect to a network by using the menu from the home screen of the printer wireless says no connection available. Troubleshooting suggest not having your router wireless near a wireless phone, so I put the printer directly next to the router and still no detection. I would have just thought that the wireless radio was broken, if it wasn't for the network diagnostic worksheet. The wireless router is also Verizon FiOS one. Thanks for your help!

  Hi rachorn,

  I see you are having some problems connecting to your network of your HP Photosmart Plus wireless. You use a FiOS router, but installation is not able to see your wireless printer. You have a solid blue light on the front of the printer, what is the IP on the diagnostic page you printed and it says connected?

  I would like you to take a look here: the printer is not found during Setup wireless network in Windows. This document will guide you through the implementation of the IP address manually, please follow all the steps listed. I also recommend moving the router over 4 ' and less than 20 feet of the printer as having close can cause communication problems.

  If after all troubleshooting steps have been completed and you are unable to connect the printer to your wireless network, you may need to contact your router provider and have them open some ports that can block a successful installation.

  Reply with the information requested, I'll watch for your reply.

  Thank you

• Printer wireless HP Envy 4520: can't see the instructions on the screen after downloading the required software

  I have an HP AMD A6-Series computer laptop with McCafee LiveSafe installed.  I am able to download and 'Run' the printer wireless driver software, but the instructions on the screen that are supposed to appear subsequently do not appear.

  I tried to disable the Virus protection part and the McCafee software software (thinking it can work as a pop up blocker), but to no avail... Please help!

  Hi @scgoldman2003,

  If the printer is already on the wireless network to which the computer is turned on, the computer must be able to see the printer wireless.

  Here is a support document which can help to ensure that the printer is ready for installation wireless - wireless printer Installation.

  If the wireless printer is not considered during installation this document can help - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• What is the best way to read data series high speed?

  My goal is to read 14 bytes of binary data of an instrument on the serial RS232 (460800 baud) to 2000 Hz. I didn't get a card series high speed again so I am currently using the standard serial port (115200 baud) and reading at 400 Hz I have configure the port series, empty the buffer, and then enter a while loop to read incoming data. I have a visa 14 bytes read by interation seconds 0.0025 (400 Hz). However it seems that the sensor is spewing data faster that labview can read because the bytes are accumilating in the port. After some time the buffer fills and the program fails.

  Is there a better way to do it?

  Would it not be better to read the larger quantities of data less often, for example as 1400 bytes every 0.25 seconds?

  Thank you

  Hello

  I think it would be good to read several points in a loop, and keep the loop less than 1000 Hz.  I found in the past, have something to run faster than about 10ms tends to fall down when windows loses interest in the process.  So yes, choose the slower you can get away with reading samples - for example to read every 10ms and read 20 samples every time. You should be able to configure your serial port in order to buffer the samples that I guess.

  Also and the issue of windows - if you use a loop "timed" instead of a while loop, so you can force it to an integer value including the ms.  You can also assign a dedicated processor and set the priority to 100, which means that it is less likely to elapse and decide to scan your hard drive for viruses or consult your account e-mail or what he does when he's bored with your program.  Also it "' tells you if the loop has taken longer that planned to run - you can use this to help iron out bugs etc. - report and/or to the user if you missed a few samples.

  http://zone.NI.com/reference/en-XX/help/371361H-01/Glang/timed_loop/

  JP

• Help... Help... HP Mini 1000... reset the bios! CNU9257483

  Help... Help... HP Mini 1000... reset the bios! [number of Series edited by Moderator]

  Thank all >

  Try Ken.

  e9lo7qxvuf

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• HP Officejet 4500 wireless printer does not appear on the control panel

  My HP Officejet 4500 wireless printer does not appear on the control panel.  How to fix it.  I have a laptop Toshiba and Windows 7 Home Premium OS.  Help, please.    rwillm

  Hey,.

  Thanks for the update, rwillm.  It seems that the installation of the printer can be a little messed up.  If the printer software is always installed, but simply lacks the printer, then I would advise to do a little cleaning before choosing to add the printer back.

  • Make sure that the printer is deleted from the file devices and printers
  • Click on one of the remaining printers folder
  • Select the properties of the print server at the top of the window
  • Click the tab drivers
  • Remove all drivers in this window for the Officejet 4500

  Also check in the Device Manager to verify that there is no mention of remaining of the 4500.

  • Click on the start menu
  • Right click on computer
  • Select manage in the list
  • Click Device Manager in the list of questions on the left side of the window that opens
  • Click the view at the top of the menu, and then select Show hidden devices
  • Remove all references to the 4500 in the list of devices

  After making sure of the device is gone, I recommend bike devices in the power circuit: router, computer and printer.

  * Make sure the printer has a valid IP address after switching back on and is connected to the same network as your PC before adding the printer.

  If the IP address and SSID are good for the printer, then try to add the printer with the printer software, you have installed.

  • Click on the Start Menu
  • Click on all programs
  • Open the HP folder
  • Open the folder for the series of the Officejet 4500 G510
  • Select Add a device option

  Let me know how it goes,

  Jason

• What is the difference between a Apple Watch Series II and the Nike Apple Watch?

  I am interested in buying an Apple Watch, but I don't really understand what are the difference between the two.

  Hello

  Information about the models of series 2 Apple Watch (including Apple Watch Nike +) are available here:

  https://www.Apple.com/watch/

• Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Today, I installed serif photo plus, and got the crazy computer, I uninstalled this program but I can't delete the photo over the toolbar, how to do?

  Thank you, but I had to go to safe mode and to the restoration of the PC, but it has been resolved