DeskJet 1000 c: Complications with Vista in network printing

Similar Questions

• Problems with vista wireless network connection.

  Whenever I try to access the internet via unsecured wireless network I have to reset the modem/router.  Only happens with Vista and does occur only on that network.  No problem on other networks (public) wireless and no problem at home with 3 other computers on this router wireless and internet.

  Hi Skip,

  A. when it last work very well?

  B. has been any changes made to your computer recently?

  C. don't you check the network connection?

  D. is in monitor mode wireless network card?

  Try the methods below.

  Method 1

  The tool the Network Diagnostics which is part of Windows Vista is designed to test the network connection to find errors. The Network Diagnostics tool can also be used to determine if the network-related programs are working correctly. To use this tool to resolve network connectivity problems, follow these steps:

  1. Open Internet Explorer and try to access the Web page that causes network connectivity problems.
  2. On the page that displays an Internet Explorer error message, click diagnose connection problems .

  The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  • He was unable to find a problem.
  • It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Method 2

  Open the link below and click the Fixit who can fix most of the issues related to internet explore.

  http://support.Microsoft.com/kb/936211

  Method 3

  Follow the steps in the article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Hope this has been helpful.

  Thank you
  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a HP Deskjet 1050 J410 {a} not contacted the network printer.

  I have a HP Deskjet 1050 J410 {a} printer which is not contacted via the network.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3 Windows operating system you are using?

  Method 1:

  I suggest review the links and try to run the troubleshooter and check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Network problems

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3795309&prodTypeId=18972&supportTaskId=42468

  Check out the link for more information:

  Solve a problem

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=4027462&TaskID=110

  Let us know if it helps.

• He cannot locate network printer on my laptop. Connects well with PC

  Original title: printer

  I bought a Canon MX870 series printer was installed on my PC by tech.  Even if it's a shared with my laptop computer, the printer is not found.  What should I do next?

  Hello

  1. what version of Windows is installed on the computer?

  2. do you get an error message?

  If you use Windows 7, see this link:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  If you are using Windows vista, check out this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  If not, let us know so that we can better help you with more information.

• HP Deskjet 1000 J110 series: 10 Windows

  The Deskjet 1000 is compatible with Windows 10?

  Yes it is but I would wait until Microsoft makes another major service pack.

• Vista takes network offline printer

  Vista continues to disconnect the network printer. I have uninstall and then re-install the printer in Control Panel. Never had this problem with XP. It is not the network, because I can print from our cell phones. All the drivers are installed and up-to-date. The printer is a HP Officejet Pro 7780 All In One.  It's very frustrating.

  Is there a solution to this problem? Thank you

  Radioherb

  Hello

  (1) make sure that the file and printer sharing is enabled.

  (2) If you are using a computer connected to a "working group", click on the arrow next to password protected sharing to expand this section.  Check if password protected sharing is enabled or disabled.

  If the password sharing is enabled, only people with a user account and password for this computer will be able to access your printer. Disable this option if you want anyone on the network can access the printer you share unless you give then a user account and password.

  Install the printer driver

  Use a driver downloaded from the manufacturer's site to install the printer

  1. If you use the downloaded driver, double-click the downloaded file, then click on 'run '. The file will then be extracted and start the driver installation.

  2 follow the prompts and continue with the installation until you reach the Setup completed screen appears.

  3. on this screen, check the "Select" printer port box, and then click on the manual button 'Selection '.

  4. Select "" LPT1: port local printer ' and click on 'OK', then click 'Finish'. "

  5. in the Printers window, right-click the printer icon and select 'Properties' (access to the Printers window)

  6. click on the tab "Ports", and then click 'Add Port '.

  7. Select "Local Port" and click "new port" button.

  8. Enter the name of the port using the XP computer name and the name of the printer in the \\ComputerName\PrinterName form and then click 'OK '. Close the Port name window.

  9. click on 'Close' in the Printer Ports window.

  10. the new port poster now as being selected. Click "close".

  11. click on "Install driver" If the following window appears. You are now ready to print.

  Another thing is to make sure that if the firewall windows is that there is an exception specified for sharing files and printing.

  Make sure that all the computers are on the same workgroup. By default, XP machines are set to "MSHOME" while Vista machines are set to "WORKGROUP". They should both say WORKGROUP.

  
  Troubleshoot file and printer sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Let us know if this helps

  Concerning
  Anthony.

• Huge printing Deskjet 1000

  I have a Deskjet 1000 and every time I try to print from the internet (Mozilla Firefox running) printing is HUGE.  If I can download the image and run it via Adobe is fine.  I uninstalled and reinstalled my printer with the latest drivers I can find.  Always feel HUGE.  Any help?

  KPOr,

  Welcome to the HP Forum.

  Interesting reversal.  Most of the time people ask about lowercase for printing.  The smile.

  In almost all cases, the font sizes are controlled with preview before printing.  Firefox offers the print - preview feature is under file.

  If you have no visible file, you can have your disabled Menu bar:

  You can get in 'File' from the Firefox menu bar > right click along the area General-top left of the browser until you see the menu drop-down menu: menu bar should be among the selectable items

  See the following for assistance using print preview mode and adjusting the Page Scale and numbers of police:

  Change size print with preview before printing

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!

• Impossible to see or set the printer ports for printer Lexmark Z35 with Vista

  I've been using a printer Lexmark Z35 with Vista Home Premium and then it stopped working.  When I go to the control panel of configuration/printers look at the properties of a printer (even PDF printer), when I click on the Ports tab, nothing happens, it just hangs.  I left alone for 45 minutes and it is still stuck.   I searched online but could not find anything on this.

  Uninstall and reinstall the printer.

  See:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Then, download and install the latest vista drivers for the Lexmark support site.

  See also:

  Installation of Printer Ports
  http://TechNet.Microsoft.com/en-us/library/cc775439%28WS.10%29.aspx

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  RIP!

• Printer on Windows 7 PC, unable to connect with the laptop with Vista

  I have a Lexmark 2600 Series printer on a Windows 7 32-bit computer.  I am not able to connect to the printer with Vista laptop for my wife.  I can share files and see the printer.  I try to connect and I get "Windows cannot connect to the printer. Impossible operation completed (error 0x000003eb). "I tried to install locally and change the path without success.  Any help would be much appreciated.

  Hi Zyfot,

  First of all, I would say that you add the printer on the vista computer and check.

  1. open Printers by clicking the Start button, clicking Control Panel, hardware and soundand then click Printers.
  2. click on Add a printer.
  3. in the Add Printer Wizard, select Add a network, wireless or Bluetooth printer.
  4. in the list of available printers, select the one you want to use, and then click Next. If your computer is connected to a network, only printers listed in Active Directory for your domain are displayed in the list.
  5. If prompted, install the printer driver on your computer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  6. follow the steps in the wizard and then click Finish.

  Install a printer on a home network
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also, make sure that the print spooler service is running on the windows vista computer.

  A print spooler is the service that temporarily stores the disk printing hard or in memory until the printer is ready to print.
  You must be logged on as administrator to perform these steps.

  1. open Administrative Tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. right click on the print spooler service, and then click Properties.
  4. under the tab general , next to Startup type, make sure that Automatic is selected.
  5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  I hope this helps!

  Halima S - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Deskjet 1000: Print on full page

  When I print on any size paper, this problem arises.

  To make things easy to understand, just think an A4 (210 * 297 mm). When I print on A4 paper, the width of the image is such that it should be (210 mm), but the height is about 10-15 mm less that it should be (less than 297 mm).

  The same thing happen even when printed on photo paper. (for 4 * 6 photo paper there is an empty space around 5 mm in length)

  Hello

  The HP Deskjet 1000 does not support edge to edge printing without margins, it is limited to a specific which unit margins should not exceed those.

  You can find its minimum margins according to the specifications of paper output > print margins below, the printer may not exceed these margins, which are not printable:

  http://support.HP.com/us-en/product/HP-DeskJet-1000-Printer-series---J110/4066042/model/4066376/document/c02231304/

  Shlomi

• Network printer not connecting not after Windows update.

  Vista.  Network printer does not connect after an automatic update of windows unknown.  However, requested document printing to a printer wireless unselected, connected to the same network, if the wireless printer is activated.

  Not having received a response to my follow-up question/information, I decided to "Just Do It" on mine.

  I deleted the printer listed as the wireless HP6300 and added back, once again as a network printer.  Not "Uninstall".  (I did on each computer using this printer.  Everything worked perfectly.  Both printers still coexist on the same network and works perfectly.

  As far as I know that something like an update of Windows, change the IP address of the "network printer" at the same IP address as my printer 'Wireless '.  When I deleted and added the HP6300, he returned with the correct IP address.  If anyone has another explanation, I'd be interested to hear.  This problem has also affected two of my friends systems.

  Marcofun

• Unable to connect to a network printer

  I am unable to connect to my network printer, even if when I run the command 'Connect to the printer' and select 'network', while the program is able to see my network printer, it crashes when I select the printer.

  I was able to connect to the printer in the past, but for some reason any printing interrupted.  I deleted and reinstalled the printer (HP OfficeJet Pro 8600) with the CD that came with the printer and once again, while trying to connect it froze.

  Any suggestions would be greatly appreciated.

  Hi André,.

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description provided, looks like you can not connect to the network printer.

  I have a couple of steps, which I think should help you with this problem.

  Method 1:

  Try the steps mentioned in this link and check:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Method 2:

  Visit this link to learn more about "Troubleshoot network printer."

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  In addition, visit these links and check:

  What are printer permissions?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-printer-permissions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Hope this information helps. In case you have issues with Windows, post here to Microsoft Community.

• Network printer does not not after doing a full restore to factory settings

  I DID A FULL FACTORY RESTORE ON MY COMPUTER AND NOW MY PRINTER IS NOT WORKING.  I HAVE ADDED TO MY LIST OF PRINTER AND TRIED TO DOWNLOAD THE DRIVERS FROM THE BROTHER WEBSITE, BUT NOTHING IS THERE FACT.  WHAT I DO NEXT

  Hello

  ·         What is the number and model of the printer?

  ·         You try to install or download the printer driver?

  ·         They have trouble printing from Web site using Internet Explorer?

  ·         Is the printer on the network?, if so it prints?

  Response with above information to better help you.

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• You can use a HP 2500 CM on a home network printer

  I try to install my HP 2500 CM on my home network instead of using from the LPT1 port to a single computer. It is equipped with a Jetdirect J4100a card. Is it possible to attach it in the LAN router so that I can use it on other computers in the House?

  Hi Mikesr_750,

  I suggest you to consult the following articles that will help you learn how to set up a home network and share a printer.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Setting up a network home

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Windows does not see my network printer

  I have updated drivers for my network, EPSON WorkForce 520 series printer, to support the 64-bit Windows 7 system. Since then, I am not able to print wireless from my laptop. However my husband also is connected to this network printer with Windows 7 64 bit system and is not a problem of this printer print. I uninstalled all the printer drivers and reinstalled and now Windows does not recognize a printer driver even if the printer appears under ' control panel > material and audio > devices and printers, and it shows under status "needs troubleshooting. I tried to install with usb, as well as through the network connection. What I am doing wrong?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you can not print in Windows 7.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  1. you get any error message?

  2 have had any changes made to the computer before the show?

  Please follow the methods.

  Method 1:

  Follow the steps in the link.

  Network printer problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-printer-problems (Also applies to Windows 7)

  Method 2:

  Follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.