DeskJet 2050 has. Windows 7 does not recognize not the printer. Cannot uninstall software.

Similar Questions

• Windows Firewall does not start. Cannot start connection ICS internet sharing service

  Hi Please help, my computer has been infected by a pretty nasty trojan, (MEREDROP) I managed to remove it (and all of its subsequent downloaded files), but it was very difficult. in any case since that my windows firewall does not start. I get the error code. 1075 and the msg (windows cannot start (ICS) internet connection sharing service). I tried to replace registry files, I tried the system restore, I tried to change the permissions, I tried to turn it on manually, I've updated my BITS. Ive also ensured that the dependent services are running. According to my list of component services, they are... Nothing works. I need to format the HD for this problem or is there a standalone windows firewall available for download?

  Thanks for posting. Please note that the use of system restore after infection and removal of malware very probably re-infected your computer. Please follow all instructions on this thread HERE. Let us know the results.

• Windows 7 does not send print to deskjet 932c with parallel connection, help

  I got a new hard drive installed and old a cloned.  Now, I can not print to hp deskjet 932C printer in Windows 7. Printer is connected with a parallel cable. Has worked before but not after the hard drive cloning. Help

  1. There are two ports on the Deskjet 932.  One is for a parallel cable, it has a 25 pin plug on the end that connects to the computer and a PIN 34 taken to the side of the computer.  The other port is located right next to the parallel port.   This port uses a USB A - B cable, which is what you need.  The page here can help.

  I suggest the following:

  1. Buy a cable USB A - B, the right length (quite a long time to reach the computer to the printer.)
  2. Turn the printer off.
  3. Disconnect the current parallel cable to the printer and the computer.
  4. Turn on the printer.
  5. Connect the USB cable to the printer.
  6. Plug the other end of the USB cable to the computer.

  The page here can help.

• Windows Mail does not open attachments, cannot open the PDF, JPEG attachments.

  June 29, 2009
  PROBLEM OPENING JPEG AND PDF ATTACHMENTS TO EMAILS: CANNOT RUN COMMAND.  GET HELP FROM COMMUNITIES.

  I went to communities and found this answer:

  FIX ATTEMPT N ° 1

  > VISTA PROBLEM
  > To correct pass them: -.
  > Windows Mail
  > Tools
  > Options
  > Security
  > 2nd box should be empty (do not allow any parts attached to save or open
  (> likely to contain a virus)
  > Apparently things change on the updates we do not!
  > If it returns checkbox to display the iof has become checked again, otherwise get out
  > of windows mail, then go in again and it should be fine.

  I have done this and it does not solve the problem.

  ATTEMPT TO FIX N ° 2

  So I went to my Antivirus, Avira Antivirus program.
  and I changed:

  Configuration > CUSTODY > SCAN when READING and WRITING > USE FILE EXTENSIONS LIST >

  And here, in the list of extensions of files to analyze and prevent, I deleted the list: JPEG, JPG, PDF.

  This does not solve the problem.

  FIXING NO. 3

  I also run the new MICROSOFT SECURITY ESSENTIALS BETA.

  went to MICROSOFT SECURITY ESSENTIALS (BETA). SETTINGS > EXCLUDE FILE TYPES > and added *.jpeg and *.pdf

  There was no change, when I tried to open the PDF attachment, I always received: "command failed implementation.

  FIXING NO. 4

  (By the way, I have nothing better to do in my office on Monday morning held that fix this bug for MSFT).

  I removed IE 8 on my system and actually removed all IE from my system, I'll stick with Mozilla.

  No change.

  CORRECTION ATTEMPT N ° 5

  I finally found an electronic bulletin board and followed the suggestions to save the file to my desktop and then
  Open with Adobe and it worked well.

  WHY CAN'T I OPEN JUST JOINED MS MAIL?

  OK, I found another thread with an answer that works.

  Why this answer doesn't work, I have idea of NF.

  Instead of opening the e-mail from a shortcut program, on the desktop and open the e-mail program on the start menu to:

  Go to: all programs, then select Microsoft Mail.

  Then the attachments will be opened.

  It worked for me, it's worth a try.

  Good luck to you.  I know that's no fun.

• Windows defender does not load and cannot download Adobe flash player

  I think I have a security problem with windows defender, because it does not load. In addition, a file I have download must have the permissions of the administrator to continue, which was also changed and I had checked him to ask permission. For this reason, I can't download adobe reader. It has an error that keeps coming back whenever I try to download it, and after I executed the file, he's just in a display type of backup file, where it was downloaded, but it will not work on the second stage, when you need the permission of an administrator. I has not yet come. Can someone tell me what to do?

  "It is said that I need adobe flash player.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  I have the fire threat and no other protection against the virus.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• 8.1 Windows pc does not start after you uninstall Avast

  8.1 Windows pc with a 120 GB SSD primary and secondary 1 TB HHD.

  I decided to uninstall Avast, that we have a spare license on pay an anti virus package. The pc has been verified to ensure that all updates have been made and the pilots were up-to-date with a reboot after each. But after uninstalling Avast and restart I noticed the message Preparation AutoFix, which was not successful.  After which she was trying to diagnose. I tried to update, but it says there was a problem with refresh. Has been no change. he says there is no system restore points. Startup Repair couldn't fix it PC and gave the location of the log file that I opened via the command prompt. That indicates the number of causes deep = 1. All tests show results completed successfully and the error code = 0x0, except one, which is

  Name: Test of the registry hives
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 859ms
  Root cause found:
  ---------
  Registry is corrupt
  Repair action: roll back register
  Result: failed. Error code = 0 x 2
  taking time = 0ms

  Now I don't know what to do! BUT before you do anything I want to look at and could ask for advice on this, the SSD 120 that Windows is on is almost full. I consider getting a greater capacity, especially if it is perhaps a better workaround. So can someone advise... Should I try and get somehow the problem resolved with the existing SSD, or will I get a new SSD and install Windows 8 on that and then try and extract what I maybe need off the old SSD? I would add that I have an installation disc of Windows 8 and then put far to 8,1 win via a download.

  I would add also... I'm not an expert with these things should easy understand so help!

  Thanks in advance

  Thanks for getting back to me. My questions are exactly the same as the original thread. After unistalling avast my 8.1 win goes into a loop of repair, no access to the office, safe mode, refresh does not work.  tried everything etcetcetcetc original thread and more. Consider no solution found.

• New series HP Deskjet 2050 J510 "paper jam" will not be printed

  HP Deskjet 2050 J510 series

  I bought this about a month ago. I can always get to print (although it will scan)

  He repeated to me that there is a paper jam when there is no!

  I'm at my wit's end.  I tried everything, except back to the store and throw it on them!

  Life wasn't supposed to be this hard!

  Any fix suggedted?

  Hi michaelangelica

  Try following the steps described in this document

  It works?

  Ciara

• Error: "C:\Program Files\FileName\filename\unis000.dat" does not exist and cannot uninstall the program

  Original title: How can I removed the programs installed that I tried to uninstall, I get a message file does not exist can not uninstall what I do next

  Hello, well this is not the only program file I have in my list of programs in the programs and features. I get the same message when I try to run uninstall them. I get a red alert response in a separate box. This warning;  File "C:\Program Files\FileNmae\filename\unis000.dat" does not exist can not uninstall.

  Hi LuckySafeHaven,
   
  -What version of the operating system are you using?
  -With what program to this problem?
  -What is the name of the file that is mentioned in the error message?
   
  unins000.dat is a library of dynamic links associated with malicious software (dll). Legitimate dll files contain a set of executable functions that can be used by Windows applications. The dll associated with the malware containing malicious code that causes damage to your PC.
   
  Try to remove the folder/filename mentioned the location C:/Program Files.
  Scan your computer to remove malicious software.

  Do a full scan of the system with the Windows malicious software removal tool and search for malicious software present on your PC.

  Microsoft Windows Malicious Software Removal Tool to help remove specific prevalent malicious software from computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000. After you download the Microsoft Malicious Software Removal Tool, the tool runs one time to check your computer infections per prevalent malicious software (including Blaster, Sasser, and Mydoom) and helps remove infections it finds. Microsoft releases a new version of the tool each month.

  See this link for more details:

  The Microsoft Windows malicious software removal tool helps remove specific malicious software and present on computers that are running Windows 7, Windows Vista, Windows Server 2003, Windows Server 2008, Windows XP, or Windows 2000

• Windows xp does not start due to corrupted software hive.

  Windows xp won, t start.

  n, t go in safe mode,

  error message:

  failure of a registry file,

  Registry cannot load the hive (file)

  systemroot\systen32\config\software diary or his substitute is damaged, absent, or not writable

  http://www.pchell.com/support/recoverfromcorruptedregistry.shtml

  or Microsoft article...
  http://support.Microsoft.com/kb/307545

• Windows Update does not, Media Player cannot access track info, internet Explorer does not

  As the title. Firefox works well, all Web sites work well, but nothing to do with windows cannot connect to the internet.
  This has happened for a long time, using more than one modem and the router. Only windows firewall is activated, also tried to turn it off.
   
  I lost something important somewhere, or changed a setting accidentally?
  Updated to explore 9, still no luck.

  Hello DavebTD,

  Thanks for your post.  Remember that Windows Update requires the use of Internet Explorer.  You try to access the Windows Update with Firefox page?  We can't wait to hear back on your part.

  See you soon

• Windows 7 does not load and cannot be retrieved after update.

  It occurs first, about 2-3 months ago. Update my Windows 7, he said: "Step 5 of 5", then reloaded, and... I saw a BIOS screen, when I chose Windows startup, he tries just to start and return to the BIOS screen as there is not any OS.

  So, then I guess not that the problem lies in the update; I tried to recover Windows from my drive, but he says that the windows are different to my computer and my drive. So, reinstall Windows, the disk and after a few updates (I think that when it came to the last of them) all repeated. So I just reinstall Windows again and turn off the auto updates, since I don't have the time to fix the problem.

  Everything works fine, until a few days ago I turn on automatic updates for it, and now I had the same problem. Fortunately, I have installed Linux on another hard drive, so I am currently using.

  What technical information I give to get any help? It's a pretty annoing because the computer is less than 3 years.

  Do not use Windows Update before installing the latest version of the Windows Update Client, KB3161647.

  https://support.Microsoft.com/en-us/KB/3161647

  Best regards, VZ

• new updated flash player installation does not install and cannot uninstall the old version

  been trying to install the most recent update of the adobe reader, but it will not be installed at gets all the up to 7% then gpes far so I tried to uninstall, but it will not uninstall need help! I use google chrome on my macbook pro

  Google Chrome (even on a Mac) has its own exclusive construction of Flash Player ("PepperFlash"). It was modified by Google, incorporated by Google and maintained by Google. Adobe is working with Google for updates and patches, but it is "their baby" once it happens in the browser. It cannot be updated through this site. It updates ONLY by updating Chrome.

  There are instructions to perform a "clean installation" (How to perform a "clean installation" of Flash Player in Mac OS X) but that doesn't apply to the Flash Player for Safari and Firefox plugin.

  You can try this:

  Go to: [username] / Library/Application Support/Google/Chrome ([username] / library is accessible by pressing the "Option" when you click on 'Go' in the Finder menu)

  Inside the Chrome folder is a folder named "PepperFlash".

  Trash and empty the trash.

  Restart Chrome.

  He must rebuild the file system plugins. Otherwise, update of Chrome and it will be.

• Windows Explorer does not respond, the applications do not open, System Restore does not work. Help!

  Hello, my computer is having a lot of problems, which started last night. Here are the things that are run:

  -Windows Explorer does not respond
  -Computer cannot disconnect correctly: down/restarts when I close the computer says "disconnect" for hours.
  -Cannot use the system restore and may not even start from Safe Mode command prompt
  -Safe mode does not load
  -No applications work, apart from web browsers, and AVG.
  -Cannot access the drivers, to make anything back.

  I added not all strange programs and I do not think it is malware, but I can't actually run my anti-malware program. My computer is running really hot, what he has always done and I keep it high and the fan not covered (I'm broke, can't afford a fix of the computer, or the new computer).  Please talk is profane. I'm not all that techno.  THANKS FOR ANY HELP!

  The model is:

  M8622 laptop Gateway
  Vista Home Premium 32 Bit

  So I reinstalled everything, and even though it's a pain, my computer is normal again! Must have been a virus.

  Thank you very much for your help!

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• My Windows Update does not seem to recognize the need for updates

  My Windows Update does not seem to recognize the need for updates to the programs... This has happened for a long time. It will only recognize the updates of Microsoft Security Essentials, but when he checks the updates it points only to the basics of security. I don't know there are updates that Microsoft Updates jumps...

  msft777jf,

  Check the 2nd Tuesday of each month - later in the day. (after 10:00 Pacific time)

  06/06 / 1107:38: 16 pm