DeskJet 2540: Deskjet 2540 stops in the middle of print job

Similar Questions

• HP DeskJet 2546B: Deskjet 2540 stops in the middle of the print page

  I was not able to connect my computer to my pc via wifi a colledge, so I connect my printer via the usb port on my pc (I use the white cable provided with the printer that connects to the back of it). Impression of normal word documents is very well, but I have been tring to print several pages of a pdf file and it stops a few lines of print. No error message, no warning sounds, just stops. The power light flashes too.

  The cord is still plugged, it says in my devices on my pc that is always connected, and I can see the print job in my what. I can delete from my without any problem and it will spit the rest of th page. If I leave without doing anything, he will spit the pages finally after one minute. It will always work in Quebec of the printer, but it won't do anything with it.

  And I can't seem to convert the content of the pdf in word format to work around the problem.

  What can I do to fix this?

  Hi @Roket107,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you are using a HP Deskjet 2540 all-in-One printer with a Windows 10 computer and when you try to print from a PDF file the print job stops printing without any error messages, but seem to print correctly from MS Word. I would like to help.

  I would start by checking the printer software installed by downloading and running the tool HP Print and Scan Doctor. This tool can diagnose and solve many problems of printing software and printer.

  It could also help to ensure that the updates of Windows are updated.

  If HP Printy and the Scan doctor does detect no problem with printing software, perhaps that the software used to view and print PDFs must be updated, or uninstalled, then reinstalled.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• All-in-one HP Deskjet 2540: delete at the request of print job on a deskjet printer MAC OS 2540 x 10.9

  How can I delete a regular print job to a 2540 MAC OSX 10.9 deskjet printer.  I can pause, but may not know how to remove it completely.

  Hello @annetrumbo,

  Welcome to the Forums of HP Support!
  
  I would like to help you today with removal of a print job in the print queue for your all-in-one printer of HP Deskjet 2540 on your computer Mac OS X 10.9. Can I please you follow the steps below.

  1. click on the Apple icon in the upper left corner of your computer screen

  2. click on System Preferences

  3. click on Print & Scan

  4. click on printer Deskjet on the left to highlight

  5. click on Open Print Queue on the right side

  

  6. in the print queue window, click the print job you want to delete. Then click on Remove in the top left corner. Once the print queue window is clear, you will have a nice clean slate for your printer.

  Please let me know if this procedure works for you. Good luck!

• HP Color LaserJet CP2025dn UPD: Hp color laserjet cp2025 goes into cleaning/calibration in the middle of print job.

  HP Color LaserJet CP2025dn will be printing and stop suddenly and get into the routine cleaning or a calibration for no reason apparent.  This will be the last 5-10 minutes and then resume the print job.  It was produced for each 2-3 pages it prints.  I provide support for a medium-sized company, we are a print HP shop all, we use

  HP Color LaserJet CP2025dn UPD PCL 6. can someone help me solve this problem please.

  Thank you

  You must make changes by using the SAP or box below to tools:

  * Do not change/modify all settings for printer drivers. Let the printer with the default drivers.

  In the System tab and the management of the paper:
  Default paper size: letter or A4 size
  By default paper Type: plain
  Manual feed: Off
  Tray 1 size: any size
  Tray 1 Type: All types
  Tray 2 size: A4 or letter
  Tray 2 type: heavy 111-130g
  Size tray 3: A4 or letter
  Type tray 3: heavy 111-130g

  In document manipulation:
  Select specify time and Action.
  Paper at a time: 0 seconds
  Paper action: substitute

  In the tab system and print quality:
  Calibration of market: 60 Minutes
  The calibration setting: 168 hours

• 2050 all-in-one is blurred lines and feed new pages in the middle of print job

  Printer HP 2050 all-in-one

  Windows 7 Prof 64

  No recent changes. Printer worked for about 1 year.

  Problem:

  Some lines are unusually short and the letters are crumpled.  Printer is often a page feed for no apparent reason in the middle of a paragraph.  At first, I thought that the rollers of the printer have been problems grabbing the paper, but then I realized that it reproduces errors exactly in the same place for a given document.  Document one might offend lines 4 and 20 and line feed line 40 whenever I print that document B could online on line 4 and scunch line 35 every time I print it.

  I look like a problem of software for sure.  I uninstall the software and reinstall with a new download.  Let me know what happens.

• 2350 HP All in one printer printing starts but stops in the middle of printing

  on light flashing and the screen on the printer says "prints".

  Your best bet is to resolve this in the forums HP here: http://h30434.www3.hp.com/psg/?category.id=InkJet&lang=en&cc=us.  You can search for "2350.

  If this should happen to me, I want to remove the printer in WIndows, turn the printer off, pull the plug, then back on the power and reinstall it in Windows.

• Logic stops in the middle of recording

  Hello

  I never had no problem with recording in logic, but in the last week or so he continues to stop in the middle of recording.

  I could do something very simply, as posing a piano in a blank project, and after a few logical agreements stops himself.  Any notification or anything.

  The CPU is fine, I tried changing the settings of buffer etc but to no avail.

  Anyone got any ideas?

  Ben

  This happens usually when something attached to your Mac. (Midi device or iOS app) sends commands to logic...

  Try disconnecting all external midi / audio devices... associated with restart the Mac and test

  Also, make sure that no applications are running in the background of the any of your iOS devices... (Smoking them, not only to close them)

• Re: Satellite A300D - 14 p - XP stops in the middle of the installation

  Hello!

  Why when I install Windows XP on my PC overheated and stops in the middle of the installation?

  Why windows XP run so long, on the other PC as windows loads by 3 times faster!

  My PC is Satellite A300D - 14 p PSAKE8E

  If your laptop gets too hot, did you clean it?
  From time to time, you should clean your computer laptop or let's say the cooling fans.
  You can use the jet of compressed air that could blow out the dust from the cooling fans. So I clean my laptop if it of necessary.

  And what do you mean with Windows XP works on another PC 3 times faster?
  Maybe the PC has a hardware configuration that is faster than the Satellite.
  To improve performance, you can do many things: defragment the HARD disk, remove all unnecessary programs, clean the registry, disable some services, check automatic startup programs in msconfig and so far.

• I stop in the middle of the update

  Stop in the middle of a updated windows when I chose to close it. AKA. I started the update on the Welcome screen, but it forced to stop which is bad?

  Yes, it is not recommended to turn on the computer, while it is up to date

• Canon PIXMA MG5200 printer Scanner & stop in the middle of their work

  In recent weeks, my printer/scanner has developed erratic behavior. Examples: only 2 of the 3 pages are printed on only half a page. Scanning is impossible, the scanner stops in the middle of the scan or does not start even if it is the beginning of the usual sounds. I have re-installed the CD Canon, the updates of Windows are OK, I have a McAFee antivirus. When I run the diagnosis of Canon, it says that everything is OK. The problems in recent weeks and is getting worse. Windows today might not start at all, but after I ran beginning with repair and Restore Point. Any help would be appreciated.

  Hi James,

  We apologize for not be able to address your concerns in a timely.

  I suggest you to install the drivers in compatibility mode and check.

  See the steps to install a driver in compatibility mode:

  a. right click on the file to install the driver, and then select Properties.

  b. Select compatibility tab.

  c. check mark next to run this program in compatibility mode and select the operating system in the drop-down list.

  d. let the driver to install, and then check the functionality.

  If the problem persists, then try to uninstall and reinstall the printer once and check if it helps.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  Thank you.

• What happens if RMAN has stopped in the Middle?

  How can manage us if RMAN being stopped in the Middle?

  Restart RMAN backups

  With the reusable backup feature, RMAN backs up only files that were not saved after a specified date.

  bootable backup

  The feature that allows to RMAN back up only the files that have not been backed up since a specified date. Restart unit ended last backup set or copy of the image. You can use this feature after a backup fails to save the parts of the database behind the backup failed.

  On redemarrables backups

  The minimum unit of restart is a data file. However, if a backup set contains a backup piece, and this piece contains blocks of several data files, then restart unit is the backup piece. The reboot to get copies of the image unit is a data file.

  The advantage of redemarrables backup is that if the backup generates multiple backup sets, then backup completed successfully sets do not be rerun. However, if the entire database is written in a backup set, and if the backup fails to halfway through, then the whole of the backup should be repeated.

  IO errors that RMAN meets when reading files or writing for the backup pieces or copies of the RMAN image put an end to the current backup task. For example, if RMAN tries to save a file of data, but the data file is not on the disk, then RMAN complete backup. If several channels are used or redundant backup copies are created, then RMAN can however be able to continue the backup without user intervention.

  RMAN can back up only the files that have not been backed up since a specified date. Use this function after a backup fails to save the parts of the database behind the backup failed.

  You can reboot a backup by specifying the SINCE TIME clause on the BACKUP command. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  Restart a backup after having partially completed

  Use of the SINCE TIME parameter of the BACKUP command to specify a date after which a new backup is necessary. If the SINCE TIME is later than the time of execution, then RMAN backs up the file. If you use BACKUP DATABASE NOT BACKED UP without the SINCE TIME parameter, then RMAN backs up only files that have never been backed up.

  To back up only files which have been saved after a specified date:

  1. Start RMAN and connect to a catalog of database and recovery target (if used).
  2. Run the BACKUP ... NOT BACKED UP SINCE TIME command.

     Specify a valid date in the SINCE TIME parameter. The following example uses the default channel configured to back up all database files and logs archived recovery that have not been backed up during the last two weeks:

     BACKUP NOT BACKED UP SINCE TIME 'SYSDATE-14' DATABASE PLUS ARCHIVELOG;
     

• I can't download acrobat reader DC... it stops in the middle of the download.

  I can't download acrobat reader DC... it stops in the middle of the download.

  Thank you

  Riki

  Hi rikij10059110,

  Please let me know the version of the operating system installed on your computer?

  Restart your system and then try to download using this link Adobe - Adobe Acrobat Reader DC Distribution

  Kind regards
  Nicos

• problem with downloading... stops in the middle...

  Hello... I'm trying to download components hyperion... from 'delivery.oracle.com '... IAM using the "DAP 9.1" as a download manager...
  The problem is he stops in the middle (due to the failure of the power supply failure)... and ask for the username and password...
  (opens popup window = authentication required, Site = ' oracle-updates - intl.oracle.com ". username, password)
  When I enterd my oracle username and password it won't take... really a bit confused...
  I don't know why it happens to me like that... some time he won't ask any username and password... He direcly resume the download... could you please let me know what to do... ?

  Hi Sri-Oracle,
  I am also facing problem of resume with all the oracle-Updates site to update downloads - intl.oracle.com.
  I downloaded the version wanted Getright, it'll work.
  Kind regards
  ROracle

• Photosmart C8180 All-in-One printer that turns off completely in the middle of printing.

  I have a Photosmart C8180 All-in-One printer that powers completely in the middle of printing, wasting time, paper and ink. It restarts also sometimes more and more and more and sometimes it stops and all the lights blink quickly, show an on-screen error code. During these periods, the power button seems useless. I use the printer with a HP Pavilion dv7 laptop running Windows Vista and an HP / Compaq Presario Windows XP.

  When the C8180 works correctly, it's great. But I can't allow myself to be play roulette of the printer. Help, please. Thank you.

  Thanks to kkcb9395 for your help.

  Unfortunately, I have not found a solution to fix my HP C8180. The 800 number only referred me to another number (866-234-1377) where someone in India tried to sell me a phone support or a new printer. Phone support will not fix a burned capacitor and the new printers HP scan slides. Not to mention the $100. new ink I'll have to eat if I can't solve this problem.

  For anyone who has followed this thread and interested in your own C8180 setting here is a link to a parts list.
  http://www.partshere.com/hppartslist/hpparts.asp?part=L2526A
  If you find a repair manual, let me know.

  I am a customer of HP for HP CEO and longtime who think they have the customer service thing down, I'm on my way to buy an Epson.
  Thanks again for your time.

• When you print in English going to another language in the middle of printing a document

  When you print a document in English, the language changes to a different language in the middle of printing. (Printer: HP Officejet 6700 Premium)

  Hi mikesage,

  OK, since you've had this problem on three different printers and only experience when printing from this one Toshiba Laptop that indicates that the problem is something in the laptop not printers. At this stage, I need for you to test it on another computer, and if you do not experience the problem, you will need to contact Toshiba support to help you understand what the parameters of the laptop are originally the problem while printing. Let me know what you find?